Modelling the effects of charge on antibiotic diffusion and adsorption in liquid crystalline virus suspensions.

We develop a microscopic model of antibiotic diffusion in virus suspensions in a liquid crystalline state. We then approximate this with an effective homogenised model that is more amenable to analytical investigation, to understand the effect of charge on the antibiotic tolerance. We show that liquid crystalline virus suspensions slow down antibiotics significantly, and that electric charge strongly contributes to this by influencing the effective diameter and adsorptive capacity of the liquid crystalline viruses so that charged antibiotics diffuse much slower than neutral ones; this can be directly and efficiently derived from the homogenised model and is in good agreement with experiments in microbiology. Charge is also found to affect the relationship between antibiotic diffusion and viral packing density in a nontrivial way. The results elucidate the effect of charge on antibiotic tolerance in liquid crystalline biofilms in a manner that is straightforwardly extendable to other soft matter systems.

Topological Learning for the Classification of Disorder: An Application to the Design of Metasurfaces.

Structural disorder can improve the optical properties of metasurfaces, whether it is emerging from some large-scale fabrication methods or explicitly designed and built lithographically. For example, correlated disorder, induced by a minimum inter-nanostructure distance or by hyperuniformity properties, is particularly beneficial for light extraction. Inspired by topology, we introduce numerical descriptors to provide quantitative measures of disorder with universal properties, suitable to treat both uncorrelated and correlated disorder at all length scales. The accuracy of these topological descriptors is illustrated both theoretically and experimentally by using them to design plasmonic metasurfaces with controlled disorder that we then correlate to the strength of their surface lattice resonances. These descriptors are an example of topological tools that can be used for the fast and accurate design of disordered structures or as aid in improving their fabrication methods.

Thermoplasmonic Controlled Optical Absorber Based on a Liquid Crystal Metasurface.

Metasurfaces can be realized by organizing subwavelength elements (e.g., plasmonic nanoparticles) on a reflective surface covered with a dielectric layer. Such an array of resonators, acting collectively, can completely absorb the resulting resonant wavelength. Unfortunately, despite the excellent optical properties of metasurfaces, they lack the tunability to perform as adaptive optical components. To boost the utilization of metasurfaces and realize a new generation of dynamically controlled optical components, we report our recent finding based on the powerful combination of an innovative metasurface-optical absorber and nematic liquid crystals (NLCs). The metasurface consists of self-assembled silver nanocubes (AgNCs) immobilized on a 50 nm thick gold layer by using a polyelectrolyte multilayer as a dielectric spacer. The resulting optical absorbers show a well-defined reflection band centered in the near-infrared of the electromagnetic spectrum (750-770 nm), a very high absorption efficiency (∼60%) at the resonant wavelength, and an elevated photothermal efficiency estimated from the time constant value (34 s). Such a metasurface-based optical absorber, combined with an NLC layer, planarly aligned via a photoaligned top cover glass substrate, shows homogeneous NLC alignment and an absorption band photothermally tunable over approximately 46 nm. Detailed thermographic studies and spectroscopic investigations highlight the extraordinary capability of the active metasurface to be used as a light-controllable optical absorber.

All-optical switching of liquid crystals at terahertz frequencies enabled by metamaterials.

Nematic liquid crystals integrated with metallic resonators (metamaterials) are intriguing hybrid systems, which not only offer added optical functionalities, but also promote strong light-matter interactions. In this report, we show with an analytical model that the electric field generated by a conventional oscillator-based terahertz time domain spectrometer is strong enough to induce partial, all-optical switching of nematic liquid crystals in such hybrid systems. Our analysis provides a robust theoretical footing for the mechanism of all-optical nonlinearity of liquid crystals, which was recently hypothesised to explain an anomalous resonance frequency shift in liquid crystal-loaded terahertz metamaterials. The integration of metallic resonators with nematic liquid crystals offers a robust approach to explore optical nonlinearity within such hybrid material systems in the terahertz range; paves the way towards increased efficiency of existing devices; and broadens the range of applications of liquid crystals in the terahertz frequency range.

Spectral properties of intermediate to high refractive index nanocubes.

Plasmonic resonances in sub-wavelength cavities, created by metallic nanocubes separated from a metallic surface by a dielectric gap, lead to strong light confinement and strong Purcell effect, with many applications in spectroscopy, enhanced light emission and optomechanics. However, the limited choice of metals, and the constraints on the sizes of the nanocubes, restrict the optical wavelength range of applications. We show that dielectric nanocubes made of intermediate to high refractive index materials exhibit similar but significantly blue shifted and enriched optical responses due to the interaction between gap plasmonic modes and internal modes. This result is explained, and the efficiency of dielectric nanocubes for light absorption and spontaneous emission is quantified by comparing the optical response and induced fluorescence enhancement of nanocubes made of barium titanate, tungsten trioxide, gallium phosphide, silicon, silver and rhodium.

Self-Powered Dynamic Glazing Based on Nematic Liquid Crystals and Organic Photovoltaic Layers for Smart Window Applications.

Dynamic windows allow monitoring of in-door solar radiation and thus improve user comfort and energy efficiency in buildings and vehicles. Existing technologies are, however, hampered by limitations in switching speed, energy efficiency, user control, or production costs. Here, we introduce a new concept for self-powered switchable glazing that combines a nematic liquid crystal, as an electro-optic active layer, with an organic photovoltaic material. The latter aligns the liquid crystal molecules and generates, under illumination, an electric field that changes the molecular orientation and thereby the device transmittance in the visible and near-infrared region. Small-area devices can be switched from clear to dark in hundreds of milliseconds without an external power supply. The drop in transmittance can be adjusted using a variable resistor and is shown to be reversible and stable for more than 5 h. First solution-processed large-area (15 cm2) devices are presented, and prospects for smart window applications are discussed.

Characterization of optically thin cells and experimental liquid crystals.

The current development of new liquid crystal devices often requires the use of thin cells and new experimental materials. Characterizing these devices and materials with optical methods can be challenging if (1) the total phase lag is small ("thin cells") or (2) the liquid crystal optical and dielectric properties are only partially known. We explore the limitations of these two challenges for efficient characterization and assessment of new, to the best of our knowledge, liquid crystal devices. We show that it is possible to extract a wealth of liquid crystal parameters even for cells with a phase lag of ΔΦ≈π, such as E7 liquid crystal in a 1.5 µm cell, using cross-polarized intensity measurements. The reliability of the optical method is also demonstrated for liquid crystals without precise values of dielectric or refractive index coefficients.

Analysis of light diffraction by azobenzene-based photoalignment layers.

Photoalignment materials, such as the azobenzene-based PAAD series studied here, are becoming increasingly important in liquid crystal-based optical devices and displays. Yet their properties and, in particular, their response to light, are still not fully understood. We investigate, experimentally and theoretically, the photoinduced birefringence, the order parameter and the formation of surface relief gratings, as well as the diffraction caused by them. We show that some of the azobenzene PAAD materials are suitable for the formation of surface relief gratings with high modulation depth, while others exhibit strong photoinduced birefringence. The two effects are inversely correlated: the stronger the surface relief grating is, the weaker is photoinduced birefringence. Analytical formulas based on the Raman-Nath approximation and numerical simulations of Maxwell's equations are used to quantify the diffraction caused by the induced diffraction gratings, showing excellent agreement between theory and experiment.

Modelling of filamentous phage-induced antibiotic tolerance of P. aeruginosa.

Filamentous molecules tend to spontaneously assemble into liquid crystalline droplets with a tactoid morphology in environments with high concentration on non-adsorbing molecules. Tactoids of filamentous Pf bacteriophage, such as those produced by Pseudomonas aeruginosa, have been linked to increased antibiotic tolerance. We modelled this system and show that tactoids composed of filamentous Pf virions can lead to antibiotic tolerance by acting as an adsorptive diffusion barrier. The continuum model, reminiscent of descriptions of reactive diffusion in porous media, has been solved numerically and good agreement was found with the analytical results, obtained using a homogenisation approach. We find that the formation of tactoids significantly increases antibiotic diffusion times which may lead to stronger antibiotic resistance.

Nanoparticle-Induced Property Changes in Nematic Liquid Crystals.

Doping liquid crystals with nanoparticles is a widely accepted method to enhance liquid crystal's intrinsic properties. In this study, a quick and reliable method to characterise such colloidal suspensions using an optical multi-parameter analyser, a cross-polarised intensity measurement-based device, is presented. Suspensions characterised in this work are either plasmonic (azo-thiol gold AzoGNPs) or ferroelectric Sn2P2S6 (SPS) nanoparticles in nematic liquid crystals. The elastic constants and rotational viscosity showed nonlinear dependence on the concentration of AzoGNPs, initially increasing at lower concentrations and then decreasing at higher concentrations, indicating some degree of particle aggregation. For the SPS suspension, the elastic constant decreased with doping, while the rotational viscosity increased, in agreement with previous findings. Through viscosity measurements, the stability of SPS suspension over ten years is also highlighted.

Efficient scattering model of multilayer systems with anisotropic films.

We present an intuitive and efficient method for modeling light propagation in layered isotropic and anisotropic media, which we call the Iterated Ray Method. Considering a single layer sandwiched between semi-infinite layers, the infinite reflected and transmitted rays are summed to obtain effective Fresnel coefficients for the center layer. Thus, the system can be represented as two semi-infinite layers with an effective boundary. The model is coupled to a recursive algorithm to describe an arbitrarily large layered system in the same way. It is numerically stable in the presence of evanescent waves and computationally efficient, both in terms of operation counts and vectorization. We demonstrate its importance for the optical analysis and optimization of layered media, such as those used in photo-addressable liquid crystal cells, thin-film coatings, and Bragg gratings, by measuring the refractive index and thickness of a thin azobenzene dye photo-alignment layer, PAAD-22E, on an indium tin oxide coated glass slide.

Wide area mapping of liquid crystal devices with passive and active command layers.

We track the non-uniformity of a wide area liquid crystal device using multiple cross-polarized intensity measurements. They give us not only accurate estimates of the core physical liquid crystal parameters, such as elastic constants, but also spatial maps of the device properties, including the liquid crystal thickness and pretilt angle. A bootstrapping statistical analysis, coupled with the multiple measurements, gives us reliable error bars on all the measured parameters.

Controlling Stiction in Nano-Electro-Mechanical Systems Using Liquid Crystals.

Stiction is one of the major reliability issues limiting practical application of nano-electro-mechanical systems (NEMS), an emerging device technology that exploits mechanical movements on the scale of an integrated electronic circuit. We report on a discovery that stiction can be eliminated by infiltrating NEMS with nematic liquid crystals. We demonstrate this experimentally using a NEMS-based tunable photonic metamaterial, where reliable switching of optical response was achieved for the entire range of nanoscopic structural displacements admitted by the metamaterial design. Being a more straightforward and easy-to-implement alternative to the existing antistiction solutions, our approach also introduces an active mechanism of stiction control, which enables toggling between stiction-free and the usual (stiction-limited) regimes of NEMS operation. It is expected to greatly expand the functionality of electro-mechanical devices and enable the development of adaptive and smart nanosystems.

Bistability with optical beams propagating in a reorientational medium.

We investigated bistability with light beams in reorientational nematic liquid crystals. For a range of input powers, beams can propagate as either diffracting or self-trapped, the latter corresponding to spatial solitons. The first-order transition in samples exhibiting abrupt self-focusing with a threshold is in agreement with a simple model.

Nematicons in planar cells subject to the optical Fréedericksz threshold.

We investigate, both theoretically and experimentally, self-trapping of light beams in nematic liquid crystals arranged so as to exhibit the optical Fréedericksz transition in planar cells. The resulting threshold in the nonlinear reorientational response supports a bistable behavior between diffracting and self-localized beam states, leading to the appearance of a hysteretic loop versus input excitation. Our results confirm the role of nematic liquid crystals in the study of non-perturbative nonlinear photonics.

Magnetite nanorod thermotropic liquid crystal colloids: synthesis, optics and theory.

We have developed a facile method for preparing magnetic nanoparticles which couple strongly with a liquid crystal (LC) matrix, with the aim of preparing ferronematic liquid crystal colloids for use in magneto-optical devices. Magnetite nanoparticles were prepared by oxidising colloidal Fe(OH)(2) with air in aqueous media, and were then subject to alkaline hydrothermal treatment with 10 mol dm(-3) NaOH at 100°C, transforming them into a polydisperse set of domain magnetite nanorods with maximal length ~500 nm and typical diameter ~20 nm. The nanorods were coated with 4-n-octyloxybiphenyl-4-carboxylic acid (OBPh) and suspended in nematic liquid crystal E7. As compared to the conventional oleic acid coating, this coating stabilizes LC-magnetic nanorod suspensions. The suspension acts as a ferronematic system, using the colloidal particles as intermediaries to amplify magnetic field-LC director interactions. The effective Frederiks magnetic threshold field of the magnetite nanorod-liquid crystal composite is reduced by 20% as compared to the undoped liquid crystal. In contrast with some previous work in this field, the magneto-optical effects are reproducible on time scales of months. Prospects for magnetically switched liquid crystal devices using these materials are good, but a method is required to synthesize single magnetic domain nanorods.

Photorefractive control of surface plasmon polaritons in a hybrid liquid crystal cell.

We present a photorefractive hybrid liquid crystal system that allows strong photorefractive effects on surface plasmon polaritons. We demonstrate its capability to couple energy between two 1.03 eV surface plasmon polariton modes with an efficiency of 25.3±2.3%. We present the energy and grating pitch dependence of the diffraction and a model that can qualitatively explain them.

Combined ellipsometry and refractometry technique for characterisation of liquid crystal based nanocomposites.

Spectroscopic ellipsometry is a technique especially well suited to measure the effective optical properties of a composite material. However, as the sample is optically thick and anisotropic, this technique loses its accuracy for two reasons: anisotropy means that two parameters have to be determined (ordinary and extraordinary indices) and optically thick means a large order of interference. In that case, several dielectric functions can emerge out of the fitting procedure with a similar mean square error and no criterion to discriminate the right solution. In this paper, we develop a methodology to overcome that drawback. It combines ellipsometry with refractometry. The same sample is used in a total internal reflection (TIR) setup and in a spectroscopic ellipsometer. The number of parameters to be determined by the fitting procedure is reduced in analysing two spectra, the correct final solution is found by using the TIR results both as initial values for the parameters and as check for the final dielectric function. A prefitting routine is developed to enter the right initial values in the fitting procedure and so to approach the right solution. As an example, this methodology is used to analyse the optical properties of BaTiO(3) nanoparticles embedded in a nematic liquid crystal. Such a methodology can also be used to analyse experimentally the validity of the mixing laws, since ellipsometry gives the effective dielectric function and thus, can be compared to the dielectric function of the components of the mixture, as it is shown on the example of BaTiO(3)/nematic composite.

Nematicon-nematicon interactions in a medium with tunable nonlinearity and fixed nonlocality.

We investigate the attractive interaction between spatial solitons in nematic liquid crystals with a tunable nonlinearity and a constant nonlocality. The experimental study, carried out by controlling the orientation of the optic axis via the electro-optic response, shows how the interactions depend on reorientation, in excellent agreement with a model accounting for the anisotropic nature of the dielectric.

Large effect of a small bias field in liquid-crystal magnetic transitions.

Most liquid crystals show low sensitivity to magnetic field. However, in this paper we show that a small bias magnetic field not only breaks the symmetry of the ground state, but also plays a crucial role in facilitating the reorientation induced by a large test magnetic field. In particular, a small bias field may alter significantly the strength of the test field needed to observe a given reorientation of the liquid crystal. Moreover, the bias field interacts with other symmetry breaking features of the cell, e.g., pretilt, to change also the qualitative features of the equilibrium state.