New Dinuclear Macrocyclic Copper(II) Complexes as Potentially Fluorescent and Magnetic Materials.

Two dinuclear copper(II) complexes with macrocyclic Schiff bases K1 and K2 were prepared by the template reaction of (R)-(+)-1,1'-binaphthalene-2,2'-diamine and 2-hydroxy-5-methyl-1,3-benzenedicarboxaldehyde K1, or 4-tert-butyl-2,6-diformylphenol K2 with copper(II) chloride dihydrate. The compounds were characterized by spectroscopic methods. X-ray crystal structure determination and DFT calculations confirmed their geometry in solution and in the solid phase. Moreover, intermolecular interactions in the crystal structure of K2 were analyzed using 3D Hirshfeld surfaces and the related 2D fingerprint plots. The magnetic study revealed very strong antiferromagnetic CuII-CuII exchange interactions, which were supported by magneto-structural correlation and DFT calculations conducted within a broken symmetry (BS) framework. Complexes K1 and K2 exhibited luminescent properties that may be of great importance in the search for new OLEDs. Both K1 and K2 complexes showed emissions in the range of 392-424 nm in solutions at various polarities. Thin materials of the studied compounds were deposited on Si(111) by the spin-coating method or by thermal vapor deposition and studied by scanning electron microscopy (SEM/EDS), atomic force microscopy (AFM), and fluorescence spectroscopy. The thermally deposited K1 and K2 materials showed high fluorescence intensity in the range of 318-531 nm for K1/Si and 326-472 nm for the K2/Si material, indicating that they could be used in optical devices.

Tautomeric Equilibrium in 1-Benzamidoisoquinoline Derivatives.

In this study, the tautomeric equilibrium of a sequence of 1-benzamidoisoquinoline derivatives was investigated with the tools of NMR spectroscopy and computational chemistry. The equilibrium between different tautomers in these systems could be controlled via the substitution effect, and the relative content of the amide form varied from 74% for the strong electron-donating NMe2 substituent to 38% for the strong electron-accepting NO2 group in the phenyl ring. In contrast to the previously investigated 2-phenacylquinoline derivatives, the most stable and thus most abundant tautomer in the 1-benzamidoisoquinoline series except the two most electron-accepting substituents was an amide. The intramolecular hydrogen bond present in the enol tautomer competed with the intermolecular hydrogen bonds created with the solvent molecules and thus was not a sufficient factor to favor this tautomer in the mixture. Although routinely computational studies of tautomeric equilibrium are performed within the continuum solvent models, it is proven here that the inclusion of the explicit solvent is mandatory in order to reproduce the experimental tendencies observed for this type of system, facilitating strong intermolecular hydrogen bonds.

Controlling the fluorescence quantum yields of benzothiazole-difluoroborates by optimal substitution.

Precise tuning of the fluorescence quantum yield, vital for countless applications of fluorophores, remains exceptionally challenging due to numerous factors affecting energy dissipation phenomena often leading to its counterintuitive behavior. In contrast to the absorption and emission wavelength which can be precisely shifted to the desired range by simple structural changes, no general strategy exists for controllable modification of the fluorescence quantum yield. The rigidification of the molecular skeleton is known to usually enhance the emission and can be practically realized via the limiting molecular vibrations by aggregation. However, the subtle balance between the abundant possible radiative and non-radiative decay pathways makes the final picture exceptionally sophisticated. In the present study, a series of nine fluorophores obtained by peripheral substitution with two relatively mild electron donating and electron withdrawing groups are reported. The obtained fluorescence quantum yields range from dark to ultra-bright and the extreme values are obtained for the isomeric molecules. These severe changes in emission efficiency have been shown to arise from the complex relationship between the Franck-Condon excited state and conical intersection position. The experimental findings are rationalized by the advanced quantum chemical calculations delivering good correlation between the measured emission parameters and theoretical radiative and internal conversion rate constants. Therefore, the described substituent exchange provides a method to rigorously adjust the properties of molecular probes structurally similar to thioflavin T.

Experimental and Theoretical Studies of the Optical Properties of the Schiff Bases and Their Materials Obtained from o-Phenylenediamine.

Two macrocyclic Schiff bases derived from o-phenylenediamine and 2-hydroxy-5-methylisophthalaldehyde L1 or 2-hydroxy-5-tert-butyl-1,3-benzenedicarboxaldehyde L2, respectively, were obtained and characterized by X-ray crystallography and spectroscopy (UV-vis, fluorescence and IR). X-ray crystal structure determination and DFT calculations for compounds confirmed their geometry in solution and in the solid phase. Moreover, intermolecular interactions in the crystal structure of L1 and L2 were analyzed using 3D Hirshfeld surfaces and the related 2D fingerprint plots. The 3D Hirschfeld analyses show that the most numerous interactions were found between hydrogen atoms. A considerable number of such interactions are justified by the presence of bulk tert-butyl groups in L2. The luminescence of L1 and L2 in various solvents and in the solid state was studied. In general, the quantum efficiency between 0.14 and 0.70 was noted. The increase in the quantum efficiency with the solvent polarity in the case of L1 was observed (λex = 350 nm). For L2, this trend is similar, except for the chloroform. In the solid state, emission was registered at 552 nm and 561 nm (λex = 350 nm) for L1 and L2, respectively. Thin layers of the studied compounds were deposited on Si(111) by the spin coating method or by thermal vapor deposition and studied by scanning electron microscopy (SEM/EDS), atomic force microscopy (AFM), spectroscopic ellipsometry and fluorescence spectroscopy. The ellipsometric analysis of thin materials obtained by thermal vapor deposition showed that the band-gap energy was 3.45 ± 0.02 eV (359 ± 2 nm) and 3.29 ± 0.02 eV (377 ± 2 nm) for L1/Si and L2/Si samples, respectively. Furthermore, the materials of the L1/Si and L2/Si exhibited broad emission. This feature can allow for using these compounds in LED diodes.

Spectroscopic Studies of Styrylquinoline Copolymers with Different Substituents.

The aim of the study was to present the influence of various styrylquinoline (StQ) substituents on the luminescence, structural, and optical properties of StQ-containing copolymers. StQ-containing copolymers were synthesized by free-radical thermoinitiated polymerization. The calculations of the copolymerization ratios for the obtained copolymers were based on the basis of the integrated peak areas of the 1H NMR spectra in CDCl3. The luminescence measurements show that the change in the nature of the electron-donating and electron-withdrawing of the substituent shifts the emission band to longer wavelengths and causes a transition from blue fluorescence to green or yellow and orange (or even white), regardless of the electronic nature of the introduced substituent group. The structural properties were measured by Fourier-Transform Infrared (FTIR) and Raman spectroscopies. For all of the compounds, we observed similarities in the bands in FTIR and Raman measurements. The optical parameters were obtained from the absorbance measurements. Additionally, Scanning Electron Microscopy (SEM) was used to study the surface topography of the thin layers on the glass substrate. The SEM images confirm that we obtained smoother layers for two copolymers. The computational Density Functional Theory (DFT) analysis fully supports the beneficial features of the analyzed systems for their applications in optoelectronic devices. Based on the obtained results, it can be concluded that all of the studied styrylquinolines are promising materials for applications in organic light-emitting diodes (OLEDs). However, COP1 with an OCH3 donor substituent possess a wider luminescence band, and its layer is smoother and more transparent.

Computational Study on the Effect of Thienyl π-Donor on the Optical Response of Nonclassical Oligo-Pyrazinothienothiadiazole Biradicaloids.

Computational analyses were performed on nitrogen-rich oligothiadizolothiophenes TTn (n = 0-3) and their four π-donor-substituted derivatives Th-TTn (n = 0-3) to examine the optical response due to geometrical and electronic structural attributes in the longitudinal and transverse axes, respectively. Our results are understood in the context of greater conjugation in the longitudinal axis (via additional fused rings) and substitution of a thienyl π-donor in the transverse axis of the geometry of each derivative. On inspection of the frontier molecular orbitals, we found that the better electron-accepting ability with minimal sacrifice in the ionization potentials results from geometrical aspects in both longitudinal and transverse axes. Due to the narrowed highest occupied molecular orbital-lowest unoccupied molecular orbital gaps, all of the derivatives exhibit a biradicaloid character (BRC) and one-photon panchromatic absorption; however, the open-shell nature weakened the charge transfer characteristics of excitation. In both the series, the odd electron density distributions and electron localization plots amply demonstrate the weakening of ylide character in fused thiophene rings and clearly indicate to the emergence of a long-bond/single BRC in the sulfurdimithide moiety in both series. In addition, the estimated tensor components of the second hyperpolarizability as well as overall responses confirm the shift from the longitudinal to transverse axis following the substitution with the π-donor. Interestingly, the TPA cross sections show comparable behavior, but contrary to γ, π-donor thienyl substitution appears to be discouraging in getting higher TPA responses for higher homologous series. Therefore, this study opens a new conjecture on tuning better nonlinear optical properties of organic functional materials.

Linear and Nonlinear Optical Properties of Azobenzene Derivatives Modified with an (Amino)naphthalene Moiety.

The design of two-photon absorbing azobenzene (AB) derivatives has received much attention; however, the two-photon absorption (2PA) properties of bis-conjugated azobenzene systems are relatively less explored. Here, we present the synthesis of six azobenzene derivatives and three bis-azobenzenes substituted (or not) at para position(s) with one or two amino group(s). Their linear and nonlinear absorption properties are studied experimentally and theoretically. The switching behavior and thermal stability of the Z-isomer are studied for unsubstituted mono- (1a, 2a) and bis-azobenzene (3a) compounds, showing that when the length of the π system increases, the half-life of the Z-isomer decreases. Moreover, along with the increase of π-conjugation, the photochromic characteristics are impaired and the photostationary state (PSS) related to E-Z photoisomerization is composed of 89% of the Z-isomer for 2a and 26% of the Z-isomer for 3a. Importantly, the 2PA cross-section increases almost five-fold on extending the π-conjugation (2a vs 3a) and by about one order of magnitude when comparing two systems: the unsubstituted π-electron one (2a, 3a) with D-π-D (2c, 3c). This work clarifies the contribution of π-conjugation and substituent effects to the linear and nonlinear optical properties of mono- and bis-azobenzene compounds based on the experimental and theoretical approaches.

Distance Effects of Phenylpiperazine-Containing Methacrylic Polymers on Optical and Structural Properties.

New materials based on methacrylic polymers modified with 1-(4-nitrophenyl)piperazine side chains, differing in the distance of the chromophore from the polymer main chain and/or the separation between the chromophoric units in the chain, are obtained and characterized in terms of their potential applications in optoelectronic devices. The surface, structural, and optical properties of the investigated materials are determined using atomic force microscopy, spectroscopic ellipsometry combined with transmission measurements, Raman and Fourier transform infrared spectroscopy, as well as cyclic voltammetry. The relevant model systems are additionally analyzed with quantum chemical density functional theory calculations in order to enable the generalization of the structure-photophysical property relationships for the optimization of the material features. It is found that the structural modification of the material, relying on the transit of the piperazine moiety away from the main polymer chain, leads to the hypsochromic shift of the absorption spectrum. Moreover, the lowest refractive index values are obtained for the polymer with a distant ethylene group in the side-chains and increased separation between the piperazine units. It was shown that the optical energy band gaps of the investigated piperazine-containing polymers are in the range from 2.73 to 2.81 eV, which reveals their promising potential for the advances in photovoltaics, field effect transistors, or electrochromic devices as an alternative for other widely applied polymer materials.

Tautomeric equilibrium, proton affinity and mass spectrometry fragmentation of flexible hydrogen-bonded precursors and rigid [Formula: see text] fluorescent dyes.

The stability of two groups of conformationally locked molecules, similar in topology, but differing only by the type of the bridge rigidifying their structure, is studied. The series of the less-rigid 2-phenacylheterocyclic compounds and their stiff difluoroboranyl derivatives are investigated for the determination of the effect of [Formula: see text]/S/O replacement in a five-membered heterocyclic ring and the presence of a strong electron-donating group on the tautomeric equilibrium, protonation affinity, and fragmentation pattern observed in the structural elucidation by means of mass spectrometry technique. The results of the [Formula: see text]B97X-D/6-311++G(d,p) calculations, the topological analysis of electron density as well as the experimental MS measurements show the importance of the number of heteroatoms, their properties, and location in the molecule for the rational design of the systems of desired stable tautomers or the favorable protonation sites. The obtained data allow for the understanding of the fundamentals of the novel highly fluorescent difluoroborates fragmentation behavior, vital for their structural elucidation with the application of high-resolution tandem mass spectrometry methods.

Photochemical Properties and Stability of BODIPY Dyes.

The present study is devoted to the combined experimental and theoretical description of the photophysical properties and photodegradation of the new boron-dipyrromethene (BODIPY) derivatives obtained recently for biomedical applications, such as bacteria photoinactivation (Piskorz et al., Dyes and Pigments 2020, 178, 108322). Absorption and emission spectra for a wide group of solvents of different properties for the analyzed BODIPY derivatives were investigated in order to verify their suitability for photopharmacological applications. Additionally, the photostability of the analyzed systems were thoroughly determined. The exposition to the UV light was found first to cause the decrease in the most intensive absorption band and the appearance of the hypsochromically shifted band of similar intensity. On the basis of the chromatographic and computational study, this effect was assigned to the detachment of the iodine atoms from the BODIPY core. After longer exposition to UV light, photodegradation occurred, leading to the disappearance of the intensive absorption bands and the emergence of small intensity signals in the strongly blue-shifted range of the spectrum. Since the most intensive bands in original dyes are ascribed to the molecular core bearing the BF2 moiety, this result can be attributed to the significant cleavage of the BF2 ring. In order to fully characterize the obtained molecules, the comprehensive computational chemistry study was performed. The influence of the intermolecular interactions for their absorption in solution was analyzed. The theoretical data entirely support the experimental outcomes.

Insight into the Mechanisms of Low Coverage Adsorption of N-Alcohols on Single Walled Carbon Nanohorn.

We report for the first time the chromatographic study of n-alcohols (from methanol to butanol) adsorption on single walled carbon nanohorn (SWCNH). Using measured temperature dependence of adsorption isotherms (373-433 K) the isosteric adsorption enthalpy is calculated and compared with the data reported for a graphite surface. It is concluded that a graphite surface is more homogeneous, and the enthalpy of adsorption on SWCNHs at zero coverage correlates well with molecular diameter and polarizability, suggesting leading role of dispersive interactions, i.e., no heteroatoms presence in the walls of SWCNH structures. Next using modern DFT approach we calculate the energy of n-alcohols interactions with a graphene sheet and with a single nanocone finally proposing a more realistic-double nanocone model. Obtained results suggest alcohols entrapping between SWCNH with OH groups located toward nanocones ends, leading to the conclusions about very promising future applications of SWCNHs in catalytic reactions with participation of n-alcohols.

New dinuclear zinc(ii) complexes with Schiff bases obtained from o-phenylenediamine and their application as fluorescent materials in spin coating deposition.

Two Zn(ii) complexes, K1 and K2, obtained from the template reaction of zinc(ii) acetate dihydrate with o-phenylenediamine and 2-hydroxy-5-methylisophthalaldehyde (K1) or 2-hydroxy-5-tert-butyl-1,3-benzenedicarboxaldehyde (K2), respectively, were characterized by X-ray crystallography, spectroscopic (UV-vis, fluorescence and IR), and thermal methods. In the complex [Zn2(MeO)1.4(OH)0.6(L1)]·2H2O K1, there are two binding sites in the macrocyclic ligand and they are occupied by zinc(ii) cations found in slightly distorted square pyramidal environment. The zinc(ii) cations are connected by slightly asymmetric oxo bridges with a Zn1-O14-Zn1[-x, -y + 1, -z + 1] angle of 104.8(2)°. In the dimer [Zn2(CH3COO)2(L2)]·2EtOH K2, there are two crystallographically independent binding sites both occupied by zinc(ii) cations. There is a significant difference between both complexes, since in K1 only one site is independent and the second is occupied due to the application of symmetry rules, and the geometry of both sites is identical. Thin layers of the obtained Zn(ii) complexes were deposited on Si(111) by the spin coating method and studied by scanning electron microscopy (SEM/EDS), atomic force microscopy (AFM), fluorescence spectroscopy and ellipsometry. In the non-absorbing range, the value of the refractive index exhibits normal dispersion between 1.8 and 2.1 for K1_1-K1_3; and between 2.3 and 2.6 for the K2 series of samples established for long wavelengths (longer than 500 nm). The Zn(ii) complexes and their thin layers exhibited fluorescence between 534-573 nm and 495-572 nm for the compounds and the layers, respectively. The highest quantum yield of fluorescence was achieved for K2 in benzene and in the solid state ϕ = 0.78 and 0.58, respectively. The influence of the solvent polarity on the fluorescence properties of the obtained complexes was studied. Additionally, DFT calculations were performed to explain the structures and electronic spectral properties of the complexes.

Nature of intermolecular interaction in squaraine dimers.

Squaraine dyes are known for their particular optical properties. They exhibit intense photochemically stable fluorescence in usually (near) infra red region that can be quenched by intermolecular interactions. Moreover, even the centrosymmetric dyes feature non-zero second harmonic generation upon aggregation. Therefore, the detailed knowledge of the squaraine dye interaction nature both in homogenic aggregates and with other species present in the environment can be of importance for the design of new materials of desired properties. In the present study, interaction in squaraine dimers is investigated with quantum chemistry tools. Four structures: two stacked and two hydrogen-bonded are analyzed in terms of supermolecular approach and symmetry-adapted perturbation theory. MP2C/aug-cc-pVTZ supermolecular calculations confirm the particular stability of the stacked dimers and the favoured dispersion attraction for the long-displaced system.

Dinuclear Copper(II) Complexes with Schiff Bases Derived from 2-Hydroxy-5-Methylisophthalaldehyde and Histamine or 2-(2-Aminoethyl)pyridine and Their Application as Magnetic and Fluorescent Materials in Thin Film Deposition.

Two Cu(II) complexes, 1 and 2, with tridentate Schiff bases derived from 2-hydroxy-5-methylisophthalaldehyde and histamine HL1 or 2-(2-aminoethyl)pyridine HL2, respectively, were obtained and characterized by X-ray crystallography, spectroscopic (UV-vis, fluorescence, IR, and EPR), magnetic, and thermal methods. Despite the fact that the chelate formed by the NNO ligand donors (C26-C25H2-C24H2-N23=C23H-C22-C19Ph(O1)-C2(Ph)-C3H=N3-C4H2-C5H2-C6 fragment) are identical, as well as the synthesis of Cu(II) complexes (Cu:L = 2:1 molar ratio) was performed in the same manner, the structures of the complexes differ significantly. The complex 1, {[Cu2(L1)Cl2]2[CuCl4]}·2MeCN·2H2O, consists of [Cu2(L1)Cl2]+ units in which Cu(II) ions are bridged by the HL1 ligand oxygen and each of these Cu(II) ions is connected with Cu(II) ions of the next dimeric unit via two bridging Cl- ions to form a chain structure. In the dinuclear [Cu2(L2)Cl3]0.5MeCN complex 2, each Cu(II) is asymmetrically bridged by the ligand oxygen and chloride anions, whereas the remaining chloride anions are apically bound to Cu(II) cations. In contrast to the complex 1, the square-pyramidal geometry of the both Cu(II) centers is strongly distorted. The magnetic study revealed that antiferromagnetic interactions in the complex 2 are much stronger than in the complex 1, which was corresponded with magneto-structural examination. Thin layers of the studied Cu(II) complexes were deposited on Si(111) by the spin coating method and studied by scanning electron microscopy (SEM/EDS), atomic force microscopy (AFM), and fluorescence spectroscopy. The Cu(II) complexes and their thin layers exhibited fluorescence between 489-509 nm and 460-464 nm for the compounds and the layers, respectively. Additionally, DFT calculations were performed to explain the structures and electronic spectral properties of the ligands.

Gas Phase Computational Study of Diclofenac Adsorption on Chitosan Materials.

Environmental pollution with non-steroidal anti-inflammatory drugs and their metabolites exposes living organisms on their long-lasting, damaging influence. Hence, the ways of non-steroidal anti-inflammatory drugs (NSAIDs) removal from soils and wastewater is sought for. Among the potential adsorbents, biopolymers are employed for their good availability, biodegradability and low costs. The first available theoretical modeling study of the interactions of diclofenac with models of pristine chitosan and its modified chains is presented here. Supermolecular interaction energy in chitosan:drug complexes is compared with the the mutual attraction of the chitosan dimers. Supermolecular interaction energy for the chitosan-diclofenac complexes is significantly lower than the mutual interaction between two chitosan chains, suggesting that the diclofenac molecule will encounter problems when penetrating into the chitosan material. However, its surface adsorption is feasible due to a large number of hydrogen bond donors and acceptors both in biopolymer and in diclofenac. Modification of chitosan material introducing long-distanced amino groups significantly influences the intramolecular interactions within a single polymer chain, thus blocking the access of diclofenac to the biopolymer backbone. The strongest attraction between two chitosan chains with two long-distanced amino groups can exceed 120 kcal/mol, while the modified chitosan:diclofenac interaction remains of the order of 20 to 40 kcal/mol.

Testing for Ketoprofen Binding to HSA Coated Magnetic Nanoparticles under Normal Conditions and after Oxidative Stress.

Binding and transport of ligands is one of the most important functions of human blood serum proteins. Human serum albumin is found in plasma at the highest concentration. Because of this, it is important to study protein-drug interactions for this albumin. Since there is no single model describing this interaction, it is necessary to measure it for each active substance. Drug binding should also be studied in conditions that simulate pathological conditions of the body, i.e., after oxidative stress. Due to this, it is expected that the methods for testing these interactions need to be easy and fast. In this study, albumin immobilized on magnetic nanoparticles was successfully applied in the study of protein-drug binding. Ketoprofen was selected as a model drug and interactions were tested under normal conditions and artificially induced oxidative stress. The quality of obtained results for immobilized protein was confirmed with those for free albumin and literature data. It was shown that the type of magnetic core coverage does not affect the quality of the obtained results. In summary, a new, fast, effective, and universal method for testing protein-drug interactions was proposed, which can be performed in most laboratories.

Effect of Geometrical Structure, Drying, and Synthetic Method on Aminated Chitosan-Coated Magnetic Nanoparticles Utility for HSA Effective Immobilization.

Human serum albumin (HSA) is one of the most frequently immobilized proteins on the surface of carriers, including magnetic nanoparticles. This is because the drug-HSA interaction study is one of the basic pharmacokinetic parameters determined for drugs. In spite of many works describing the immobilization of HSA and the binding of active substances, research describing the influence of the used support on the effectiveness of immobilization is missing. There are also no reports about the effect of the support drying method on the effectiveness of protein immobilization. This paper examines the effect of both the method of functionalizing the polymer coating covering magnetic nanoparticles (MNPs), and the drying methods for the immobilization of HSA. Albumin was immobilized on three types of aminated chitosan-coated nanoparticles with a different content of amino groups long distanced from the surface Fe3O4-CS-Et(NH2)1-3. The obtained results showed that both the synthesis method and the method of drying nanoparticles have a large impact on the effectiveness of immobilization. Due to the fact that the results obtained for Fe3O4-CS-Et(NH2)2 significantly differ from those obtained for the others, the influence of the geometry of the shell structure on the ability to bind HSA was also explained by molecular dynamics.

Computational Study of the Influence of Nitrogen-Containing Unsaturated Heterocyclic Substituents on Electronic and Spectroscopic Properties of Squaraine Derivatives.

A comprehensive understanding of the influence of the different structural elements for the molecular properties is crucial for improving the material design procedures in the field of photosensitive dyes. The present study provides a detailed analysis of the influence of the number of heteroatoms (nitrogens) and the lengths of the π-electron skeleton on the one- and two-photon absorption of the symmetric squaraine dyes. Extended computational study covers the conventional vertical excitation calculations within the TD-DFT formalisms as well as several advanced single-reference methods including double excitations such as CIS(D), SAC-CI, and ADC(2). Additionally, the weaknesses of the vertical approach are investigated by including the geometry relaxation upon excitation via adiabatic and 0-0 treatment.

Solvation of diclofenac in water from atomistic molecular dynamics simulations - interplay between solute-solute and solute-solvent interactions.

The solubility-permeability relationship of active pharmaceutical ingredients determines the efficacy of their usage. Diclofenac (DCL), which is a widely used nonsteroidal anti-inflammatory drug, is characterized by extremely good membrane permeability, but low water solubility limiting drug effectiveness. The present research focuses on the fundamental explanation of this limitation using the combination of ab initio and classical molecular dynamics simulations of different ionic forms of DCL in water, namely, ionized, un-ionized and the mixture of them both. The analysis of diclofenac solvation in an aqueous environment is used to understand the origin of drug precipitation, especially in gastric pH. The used computational approach reveals the formation of micelle-like self-associated aggregates of diclofenac in water as the result of intermolecular π-π interactions and C-Hπ hydrogen bonds. The DCL aggregation in water is shown to depend mostly on drug concentration, protonation and temperature of the aqueous environment. The detected self-association properties of the drug in water are likely to be of great importance during the development of new drug formulations and fabrication of drug adsorbents for wastewater.

On the potential application of DFT methods in predicting the interaction-induced electric properties of molecular complexes. Molecular H-bonded chains as a case of study.

A detailed analysis of the selected DFT functionals for the calculations of interaction-induced dipole moment, polarizability and first-order hyperpolarizability has been carried out. The hydrogen-bonded model chains consisting of HF, H(2)CO and H(3)N molecules have been chosen as a case study. The calculations of the components of the static electric properties using the diffuse Dunning's basis set (aug-cc-pVDZ) have been performed employing different types of density functionals (B3LYP, LC-BLYP, PBE0, M06-2X and CAM-B3LYP). Obtained results have been compared with those gained at the CCSD(T) level of theory. The counterpoise correction scheme, namely site-site function counterpoise, has been applied in order to eliminate basis set superposition error. The performed tests allow to conclude that the DFT functionals can provide a useful tool for prediction of the interaction-induced electric properties, however a caution has to be urged to their decomposition to the two- and many-body terms.