Influence of COD in Toxic Industrial Wastewater from a Chemical Concern on Nitrification Efficiency.

COD is an arbitrary indicator of the content of organic and inorganic compounds in wastewater. The aim of this research was to determine the effect of COD of industrial wastewater on the nitrification process. This research covered wastewater from acrylonitrile and styrene-butadiene rubbers, emulsifiers, polyvinyl acetate, styrene, solvents (butyl acetate, ethyl acetate) and owipian® (self-extinguishing polystyrene intended for expansion) production. The volume of the analyzed wastewater reflected the active sludge load in the real biological treatment system. This research was carried out by the method of short-term tests. The nitrification process was inhibited to the greatest extent by wastewater from the production of acrylonitrile (approx. 51%) and styrene-butadiene (approx. 60%) rubbers. In these wastewaters, nitrification inhibition occurred due to the high COD load and the presence of inhibitors. Four-fold dilution of the samples resulted in a two-fold reduction in the inhibition of nitrification. On the other hand, in the wastewater from the production of emulsifiers and polyvinyl acetate, a two-fold reduction in COD (to the values of 226.4 mgO2·dm-3 and 329.8 mgO2·dm-3, respectively) resulted in a significant decrease in nitrification inhibition. Wastewater from the production of styrene, solvents (butyl acetate, ethyl acetate) and owipian® inhibited nitrification under the influence of strong inhibitors. Lowering the COD value of these wastewaters did not significantly reduce the inhibition of nitrification.

Pantograph Sliding Strips Failure-Reliability Assessment and Damage Reduction Method Based on Decision Tree Model.

Damage to the pantograph or sliding strip may cause the blocking of the railway line. This is the main reason for which the prediction of pantographs' failure is important for railway carriers and researchers. This article presents a sliding strips failure prediction method as a main means of preventing disruptions to the transport chain. To develop the best predictive model based on the decision tree, the complex tree, medium tree and simple tree machine learning methods were tested. Using a decision tree, the categorization of the given technical conditions can be properly realized. The obtained results showed that the presented model can reduce sliding strip failure by up to 50%. Special attention was paid to the current collector (AKP-4E, 5ZL type), measured during periodic reviews of locomotives EU07 and EU09. To assess the reliability of the selected pantograph strips, a non-destructive degradation analysis was carried out. On the basis of the wear measurements of the strips and the critical value of wear, a failure distribution model was developed. Operational data, collected during periodic technical reviews, were provided by one of the biggest railway carriers in Poland. The results of the performed analyses may be used to build a preventive maintenance strategy to protect pantographs. The applied reliability models of wear propagation can be extended by the parameters of the cost and repair time becoming the basis for estimating the costs of operation and maintenance.

A Study on the Effect of Adhesive Cavities on the Scuffing Initiation in a Sliding Contact.

Scuffing is a particularly problematic wear phenomenon in sliding contact that has not yet been fully elucidated. The complicated mechanism of the development of this phenomenon results from the simultaneous influence of many factors. There is a continuous need for new research to gain a deeper understanding of the complex frictional processes that scuffing is. Components such as cams, tappets, piston rings and gears are extremely susceptible to scuffing. The idea of the research on the scuffing wear development is the study of the formation of adhesive cavities as the effects of the destruction of adhesive bonds at various operating parameters. The goal of the presented work is the analysis of the influence of the oscillation frequency on the formation of adhesive cavities leading to scuffing. The tests carried out with the use of S235 steel showed that the adhesive cavities on the surfaces of the tested components appear regardless of the adopted values of the oscillation frequency. The surfaces of the specimen and counter-specimen were analyzed before and after wear tests on the block-on-ring test stand at the different values of the oscillation frequency. The conducted research revealed that the greatest change in the values of the friction coefficient occurs with an increase in frequency from 2 to 5 Hz, and the largest change in the number of scuffing initiating cycles occurs with an increase in the oscillation frequency from 1 to 2 Hz.

XQTav: an XQuery processor for Taverna environment.

UNLABELLED: Taverna workbench is an environment for construction, visualization and execution of bioinformatic workflows that integrate specialized tools available through the internet. It is gaining popularity fast, because of supporting the most important bioinformatic services and its simple, yet robust graphical notation. Here we present XQTav-an extension of Taverna that provides full integration with XQuery (the query language for XML) engine. XQTav allows execution of XQuery scripts in Taverna workflow diagrams. All existing Taverna processors can be accessed in the XQuery scripts. This provides an alternative way of specifying subworkflows in Taverna and is useful when one deals with query-like algorithms (e.g. filters and inner joins). Moreover, XQtav may be used to automatically generate an XQuery script that is equivalent to Taverna's workflow. This constitutes another way of creating and enacting bioinformatic workflows: overall structure of a diagram is drawn in Taverna environment, XQuery code is generated and possibly adjusted by hand. It can be executed by XQuery engines or incorporated into other software environments. AVAILABILITY: XQtav is an open source software. It may be downloaded from http://xqtav.sourceforge.net/. The page also contains various tutorials and examples, including the one described in this report.