RESUMO
The present study was aimed at comparing vertical and horizontal surface displacements derived from the Cosmo-SkyMED, TerraSAR-X and Sentinel-1 satellite missions for the detection of oil extraction-induced subsidence in the Tengiz oilfield during 2018-2021. The vertical and horizontal surface displacements were derived using the 2D decomposition of line-of-sight measurements from three satellite missions. Since the TerraSAR-X mission was only available from an ascending track, it was successfully decomposed by combining it with the Cosmo-SkyMED descending track. Vertical displacement velocities derived from 2D Decomposition showed a good agreement in similar ground motion patterns and an average regression coefficient of 0.98. The maximum average vertical subsidence obtained from the three satellite missions was observed to be -57 mm/year. Higher variations and deviations were observed for horizontal displacement velocities in terms of similar ground motion patterns and an average regression coefficient of 0.80. Fifteen wells and three facilities were observed to be located within the subsidence range between -55.6 mm/year and -42 mm/year. The spatial analyses in the present studies allowed us to suspect that the subsidence processes occurring in the Tengiz oilfield are controlled not solely by oil production activities since it was clearly observed from the detected horizontal movements. The natural tectonic factors related to two seismic faults crossing the oilfield, and terrain characteristics forming water flow towards the detected subsidence hotspot, should also be considered as ground deformation accelerating factors. The novelty of the present research for Kazakhstan's Tengiz oilfield is based on the cross-validation of vertical and horizontal surface displacement measurements derived from three radar satellite missions, 2D Decomposition of Cosmo-SkyMED descending and TerraSAR-X ascending line-of-sight measurements and spatial analysis of man-made and natural factors triggering subsidence processes.
RESUMO
A city is a dynamic entity, which environment is continuously changing over time. Accordingly, its virtual city models also need to be regularly updated to support accurate model-based decisions for various applications, including urban planning, emergency response and autonomous navigation. A concept of continuous city modeling is to progressively reconstruct city models by accommodating their changes recognized in spatio-temporal domain, while preserving unchanged structures. A first critical step for continuous city modeling is to coherently register remotely sensed data taken at different epochs with existing building models. This paper presents a new model-to-image registration method using a context-based geometric hashing (CGH) method to align a single image with existing 3D building models. This model-to-image registration process consists of three steps: (1) feature extraction; (2) similarity measure; and matching, and (3) estimating exterior orientation parameters (EOPs) of a single image. For feature extraction, we propose two types of matching cues: edged corner features representing the saliency of building corner points with associated edges, and contextual relations among the edged corner features within an individual roof. A set of matched corners are found with given proximity measure through geometric hashing, and optimal matches are then finally determined by maximizing the matching cost encoding contextual similarity between matching candidates. Final matched corners are used for adjusting EOPs of the single airborne image by the least square method based on collinearity equations. The result shows that acceptable accuracy of EOPs of a single image can be achievable using the proposed registration approach as an alternative to a labor-intensive manual registration process.
