Femtosecond laser written waveguides deep inside silicon.

Photonic devices that can guide, transfer, or modulate light are highly desired in electronics and integrated silicon (Si) photonics. Here, we demonstrate for the first time, to the best of our knowledge, the creation of optical waveguides deep inside Si using femtosecond pulses at a central wavelength of 1.5 µm. To this end, we use 350 fs long, 2 µJ pulses with a repetition rate of 250 kHz from an Er-doped fiber laser, which we focused inside Si to create permanent modifications of the crystal. The position of the beam is accurately controlled with pump-probe imaging during fabrication. Waveguides that were 5.5 mm in length and 20 µm in diameter were created by scanning the focal position along the beam propagation axis. The fabricated waveguides were characterized with a continuous-wave laser operating at 1.5 µm. The refractive index change inside the waveguide was measured with optical shadowgraphy, yielding a value of 6×10-4, and by direct light coupling and far-field imaging, yielding a value of 3.5×10-4. The formation mechanism of the modification is discussed.

Efficiency estimates and practical aspects of an optical Kerr gate for time-resolved luminescence spectroscopy.

We report experience of assembling an optical Kerr gate setup at the Femtosecond Laser Center for collective use at the Institute of Physics of the National Academy of Sciences of Ukraine. This offers an inexpensive solution to the problem of time-resolved luminescence spectroscopy. Practical aspects of its design and alignment are discussed and its main characteristics are evaluated. Theoretical analysis and numerical estimates are performed to evaluate the efficiency and the response time of an optical Kerr gate setup for fluorescence spectroscopy with subpicosecond time resolution. The theoretically calculated efficiency is compared with the experimentally measured one of ~12% for Crown 5 glass and ~2% for fused silica. Other characteristics of the Kerr gate are analyzed and ways to improve them are discussed. A method of compensation for the refractive index dispersion in a Kerr gate medium is suggested. Examples of the application of the optical Kerr gate setup for measurements of the time-resolved luminescence of Astra Phloxine and Coumarin 30 dyes and both linear and nonlinear chirp parameters of a supercontinuum are presented.