A Phase 1 First-in-Human Pharmacokinetic and Pharmacodynamic Study of JNJ-64264681, a Covalent Inhibitor of Bruton's Tyrosine Kinase.

JNJ-64264681 is an irreversible covalent inhibitor of Bruton's tyrosine kinase. This phase 1, first-in-human, 2-part (single-ascending dose [SAD]; multiple-ascending dose [MAD]) study evaluated the safety, tolerability, pharmacokinetics (PK), and pharmacodynamics (PD; Bruton's tyrosine kinase occupancy [BTKO]) of JNJ-64264681 oral solution in healthy participants. For SAD (N = 78), 6 increasing doses of JNJ-64264681 (4-400 mg) or placebo were evaluated in fasted males. The effects of sex, food, and a capsule formulation were evaluated in separate cohorts. For MAD (N = 27), sequential cohorts of male and female participants received 36/100/200 mg JNJ-64264681 once daily for 10 days. JNJ-64264681 exposure (peak concentration; area under the concentration-time curve) was less than dose proportional from 4 mg to 36 mg. Dose-normalized area under the concentration-time curves following the 36 mg and 100 mg doses were generally similar. The mean terminal half-life was 1.6-13.2 hours. With multiple doses, steady state was achieved by day 2. A semimechanistic PK/PD model was developed using the first 5 SAD cohorts' data to predict %BTKO in MAD cohorts. PK/PD model guided dose-escalation, and all participants in the 200/400 mg single-dose cohorts achieved ≥90% BTKO at 4 hours after dosing (peak) with prolonged occupancy. As BTKO data became available from MAD cohorts, it was found that observed BTKO data were consistent with model predictions. JNJ-64264681 showed no safety signals of concern. Overall, safety, tolerability, PK, BTKO, and PK/PD modeling guided the rationale for dose selection for the subsequent first-in-patient lymphoma studies.

In Vitro Evaluation of Poly(lactide-co-glycolide) In Situ Forming Gels for Bedaquiline Fumarate Salt and Pharmacokinetics Following Subcutaneous Injection in Rats.

This study evaluated in vitro and in vivo drug release of bedaquiline from in situ forming gels (ISGs) containing 200 mg eq./g bedaquiline fumarate salt prepared with four different grades of poly(d,l-lactide) (PDLLA) or poly(d,l-lactide-co-glycolide) (PLGA) with a lactide/glycolide ratio of 50/50 or 75/25 and acid (A) or ester (E) end-capping in N-methyl-2-pyrrolidone at a polymer/solvent ratio of 20/80% (w/w). Mean in vitro drug release in 0.05 M phosphate buffer pH 7.4 with 1% (w/v) sodium lauryl sulphate was 37.3, 47.1, 53.3, and 62.3% within 28 days for ISGs containing PLGA5050A, PDLLA, PLGA7525A, and PLGA7525E, respectively. The data suggested that drug release was primarily controlled by precipitated drug redissolving, rather than polymer erosion. In vivo pharmacokinetic profiles after subcutaneous injections in rats were comparable for all ISGs (mean half-lives (t1/2) ranged from 1411 to 1695 h) and indicated a sustained drug release when compared to a solution of bedaquiline fumarate salt in polyethylene glycol 400/water 50/50% (v/v) (mean t1/2 of 895 h). In conclusion, PLGA or PDLLA-based ISGs have shown potential for parenteral sustained delivery of bedaquiline, suggesting further preclinical and clinical studies. From a formulation point of view, this case example highlights the importance of the interplay between drug solubility in biological media and dissolution of drug precipitates, which, in addition to the incorporation of diffusion controlling polymers, governs the release of the active drug.

Montmorillonite-surfactant hybrid particles for modulating intestinal P-glycoprotein-mediated transport.

In the small intestine, P-glycoprotein (P-gp) may limit the permeability of its substrates, which lead to reduced oral absorption. To circumvent the effect of P-gp, a nanocomposite material termed montmorillonite-surfactant hybrid particles was developed. The particles consisted of montmorillonite, the P-gp-inhibiting, nonionic surfactant, polysorbate 20, and the P-gp substrate, digoxin. The present study aimed to investigate if montmorillonite-surfactant hybrid particles could modulate the absorption of digoxin in vivo. Montmorillonite-surfactant hybrid particles were prepared by lyophilising an aqueous suspension of the constituents. Scanning electron microscopy, thermogravimetric analysis, and powder X-ray diffraction revealed an altered surface morphology, decreased water content, and intercalation of polysorbate 20 between montmorillonite layers. The particles were administered orally to Sprague Dawley rats, and digoxin was quantified by liquid chromatography-tandem mass spectrometry. Control digoxin-containing montmorillonite decreased the exposure of digoxin. In contrast, montmorillonite-surfactant hybrid particles increased AUC and Cmax by 31 and 91%, respectively, compared to digoxin in solution. It was hypothesised that montmorillonite-surfactant hybrid particles increased digoxin exposure by forming mucosa-localised elevated concentrations of polysorbate 20 and digoxin, which enhanced the inhibitory effect of polysorbate 20 on P-gp.

Feedback from the fourth European Bioanalysis Forum Young Scientist Symposium.

Since 2014, the European Bioanalysis Forum organizes a Young Scientist Symposium. The meeting format was created to provide development opportunities for young scientists to engage in international discussions. Creating a peer community of young scientists has been a proven recipe to lower the threshold and promote engagement in this community of young talents. At the same time, the meeting is aimed at stimulating collaboration between the European Bioanalysis Forum and academia.

Serum metabolomics using ultra performance liquid chromatography coupled to mass spectrometry in lactating dairy cows following a single dose of sporidesmin.

INTRODUCTION: Photosensitization is a common clinical sign in cows suffering from liver damage caused by the mycotoxin sporidesmin. This disease, called facial eczema (FE), is of major importance in New Zealand. Current techniques for diagnosing animals with subclinical sporidesmin-induced liver damage (i.e. without photosensitization) are nonspecific. In addition, little is known of the mechanisms involved in sporidesmin resistance, nor the early effects seen following low-dose sporidesmin intoxication. OBJECTIVE: The objective of this study was to identify individual metabolites or metabolic profiles that could be used as serum markers for early stage FE in lactating cows. METHODS: Results are presented from a 59-day sporidesmin challenge in Friesian-cross dairy cows. Serum metabolite profiles were obtained using reversed phase ultra-performance liquid chromatography (UPLC) electrospray ionization mass spectrometry (MS) and UPLC tandem MS. Multivariate and time series analyses were used to assess the data. RESULTS: Statistical analysis, both with and without the temporal component, could distinguish the profiles of animals with clinical signs from the others, but not those affected subclinically. An increase in the concentrations of a combination of taurine- and glycine-conjugated secondary bile acids (BAs) was the most likely cause of the separation. This is the first time that MS methods have been applied to FE and that bile acids changes have been detected in cattle exposed to sporidesmin. CONCLUSIONS: It is well known that BA concentrations increase during cholestasis due to damage to bile ducts and leakage of the bile. This is the first study to investigate metabolomic changes in serum following a sporidesmin challenge. Further work to establish the significance of the elevation of individual BAs concentrations in the serum of early-stage sporidesmin-poisoned cows is necessary.

Development and Validation of an in vitro Experimental GastroIntestinal Dialysis Model with Colon Phase to Study the Availability and Colonic Metabolisation of Polyphenolic Compounds.

The biological effects of polyphenols depend on their mechanism of action in the body. This is affected by bioconversion by colon microbiota and absorption of colonic metabolites. We developed and validated an in vitro continuous flow dialysis model with colon phase (GastroIntestinal dialysis model with colon phase) to study the gastrointestinal metabolism and absorption of phenolic food constituents. Chlorogenic acid was used as model compound. The physiological conditions during gastrointestinal digestion were mimicked. A continuous flow dialysis system simulated the one-way absorption by passive diffusion from lumen to mucosa. The colon phase was developed using pooled faecal suspensions. Several methodological aspects including implementation of an anaerobic environment, adapted Wilkins Chalgren broth medium, 1.10(8) CFU/mL bacteria suspension as inoculum, pH adaptation to 5.8 and implementation of the dialysis system were conducted. Validation of the GastroIntestinal dialysis model with colon phase system showed a good recovery and precision (CV < 16 %). Availability of chlorogenic acid in the small intestinal phase (37 ± 3 %) of the GastroIntestinal dialysis model with colon phase is comparable with in vivo studies on ileostomy patients. In the colon phase, the human faecal microbiota deconjugated chlorogenic acid to caffeic acid, 3,4-dihydroxyphenyl propionic acid, 4-hydroxybenzoic acid, 3- or 4-hydroxyphenyl acetic acid, 2-methoxy-4-methylphenol and 3-phenylpropionic acid. The GastroIntestinal dialysis model with colon phase is a new, reliable gastrointestinal simulation system. It permits a fast and easy way to predict the availability of complex secondary metabolites, and to detect metabolites in an early stage after digestion. Isolation and identification of these metabolites may be used as references for in vivo bioavailability experiments and for investigating their bioactivity in in vitro experiments.

Characterization of polar organosulfates in secondary organic aerosol from the green leaf volatile 3-Z-hexenal.

Evidence is provided that the green leaf volatile 3-Z-hexenal serves as a precursor for biogenic secondary organic aerosol through the formation of polar organosulfates (OSs) with molecular weight (MW) 226. The MW 226 C6-OSs were chemically elucidated, along with structurally similar MW 212 C5-OSs, whose biogenic precursor is likely related to 3-Z-hexenal but still remains unknown. The MW 226 and 212 OSs have a substantial abundance in ambient fine aerosol from K-puszta, Hungary, which is comparable to that of the isoprene-related MW 216 OSs, known to be formed through sulfation of C5-epoxydiols, second-generation gas-phase photooxidation products of isoprene. Using detailed interpretation of negative-ion electrospray ionization mass spectral data, the MW 226 compounds are assigned to isomeric sulfate esters of 3,4-dihydroxyhex-5-enoic acid with the sulfate group located at the C-3 or C-4 position. Two MW 212 compounds present in ambient fine aerosol are attributed to isomeric sulfate esters of 2,3-dihydroxypent-4-enoic acid, of which two are sulfated at C-3 and one is sulfated at C-2. The formation of the MW 226 OSs is tentatively explained through photooxidation of 3-Z-hexenal in the gas phase, resulting in an alkoxy radical, followed by a rearrangement and subsequent sulfation of the epoxy group in the particle phase.

2-hydroxyterpenylic acid: an oxygenated marker compound for α-pinene secondary organic aerosol in ambient fine aerosol.

An oxygenated MW 188 compound is commonly observed in substantial abundance in atmospheric aerosol samples and was proposed in previous studies as an α-pinene-related marker compound that is associated with aging processes. Owing to difficulties in producing this compound in sufficient amounts in laboratory studies and the occurrence of isobaric isomers, a complete assignment for individual MW 188 compounds could not be achieved in these studies. Results from a comprehensive mass spectrometric analysis are presented here to corroborate the proposed structure of the most abundant MW 188 compound as a 2-hydroxyterpenylic acid diastereoisomer with 2R,3R configuration. The application of collision-induced dissociation with liquid chromatography/electrospray ionization-ion trap mass spectrometry in both negative and positive ion modes, as well as chemical derivatization to methyl ester derivatives and analysis by the latter technique and gas chromatography/electron ionization mass spectrometry, enabled a comprehensive characterization of MW 188 isomers, including a detailed study of the fragmentation behavior using both mass spectrometric techniques. Furthermore, a MW 188 positional isomer, 4-hydroxyterpenylic acid, was tentatively identified, which also is of atmospheric relevance as it could be detected in ambient fine aerosol. Quantum chemical calculations were performed to support the diastereoisomeric assignment of the 2-hydroxyterpenylic acid isomers. Results from a time-resolved α-pinene photooxidation experiment show that the 2-hydroxyterpenylic acid 2R,3R diastereoisomer has a time profile distinctly different from that of 3-methyl-1,2,3-butanetricarboxylic acid, a marker for oxygenated (aged) secondary organic aerosol. This study presents a comprehensive chemical data set for a more complete structural characterization of hydroxyterpenylic acids in ambient fine aerosol, which sets the foundation to better understand the atmospheric fate of α-pinene in future studies.

Ozone-driven secondary organic aerosol production chain.

Acidic sulfate particles are known to enhance secondary organic aerosol (SOA) mass in the oxidation of biogenic volatile organic compounds (BVOCs) through accretion reactions and organosulfate formation. Enhanced phase transfer of epoxides, which form during the BVOC oxidation, into the acidified sulfate particles is shown to explain the latter process. We report here a newly identified ozone-driven SOA production chain that increases SOA formation dramatically. In this process, the epoxides interact with acidic sulfate particles, forming a new generation of highly reactive VOCs through isomerization. These VOCs partition back into the gas phase and undergo a new round of SOA forming oxidation reactions. Depending on the nature of the isomerized VOCs, their next generation oxidation forms highly oxygenated terpenoic acids or organosulfates. Atmospheric evidence is presented for the existence of marker compounds originating from this chain. The identified process partly explains the enhanced SOA formation in the presence of acidic particles on a molecular basis and could be an important source of missing SOA precursor VOCs that are currently not included in atmospheric models.

Mass spectrometric characterization of organosulfates related to secondary organic aerosol from isoprene.

RATIONALE: A considerable fraction of atmospheric particulate fine matter consists of organosulfates, with some of the most polar ones originating from the oxidation of isoprene. Their structural characterization provides insights into the nature of gas-phase precursors as well as into formation pathways. METHODS: The structures of unknown polar organosulfates present in ambient particulate fine matter were characterized using liquid chromatography/(-)electrospray ionization mass spectrometry (LC/(-)ESI-MS), including ion trap MS(n) and accurate mass measurements, derivatization of the carbonyl group into 2,4-dinitrophenylhydrazones, detailed interpretation of the MS data, and in a selected case comparison of their LC and MS behavior with that of synthesized reference compounds. RESULTS: Polar organosulfates with molecular weights (MWs) of 156, 170, 184 and 200 were attributed to/or confirmed as derivatives of glycolic acid (156), lactic acid (170), 1,2-dihydroxy-3-butanone (184), glycolic acid glycolate (200), 2-methylglyceric acid (200), and 2,3-dihydroxybutanoic acid (200). In the case of the MW 184 compound an unambiguous assignment was obtained through synthesis of reference compounds. CONCLUSIONS: A more complete structural characterization of polar organosulfates that originate from isoprene secondary organic aerosol was achieved. An important atmospheric finding is the presence of an organosulfate that is related to methyl vinyl ketone, a major gas-phase oxidation product of isoprene. In addition, minor polar organosulfates related to crotonaldehyde were identified.

Formation of secondary organic aerosol marker compounds from the photooxidation of isoprene and isoprene-derived alkene diols under low-NO(x) conditions.

In the present work, we have evaluated whether isomeric C5-alkene diols (1,2-dihydroxy-2-methyl-3-butene, 1,2-dihydroxy-3-methyl-3-butene, and 1,4-dihydroxy-2-methyl-2-butene (cis + trans)), which have first been detected upon photooxidation of isoprene in the absence of NO and are known to be formed in the ambient atmosphere, can serve as precursors for the 2-methyltetrols, C5-alkene triols, and 2-methylglyceric acid under low-NO(x) conditions. The C5-alkene diols were prepared following published synthesis procedures. It is shown that under the applied chamber conditions the isomeric C5-alkene diols give rise to 2-methyltetrols with different threo/erythro abundance ratios and that certain diols produce 2-methylglyceric acid, but that they do not form C5-alkene triols. Furthermore, it is shown that the photooxidation of isoprene under the applied chamber conditions employing photolysis of H2O2 under dry conditions yields relatively small amounts of C5-alkene triols compared to those of the 2-methyltetrols, unlike under ambient conditions. It is argued that the chamber conditions are not optimal for the formation of C5-epoxydiols, which serve as gas-phase precursors for the C5-alkene triols, and likely as in some previous studies favor the formation of C5-alkene diols as a result of RO2 + RO2 reactions.

Denuder sampling techniques for the determination of gas-phase carbonyl compounds: a comparison and characterisation of in situ and ex situ derivatisation methods.

Two denuder sampling techniques have been compared for the analysis of gaseous carbonyl compounds. One type of denuder was coated with XAD-4 resin and the other type of denuder was coated with XAD-4 and 2,4-dinitrophenylhydrazine (DNPH) to derivatise gaseous carbonyl compounds to their hydrazone forms simultaneously. A detailed protocol for the denuder coating procedure is described. The collection efficiency under dry (RH <3%) and humid conditions (RH 50%) as well as filter positive artefacts were evaluated. The XAD-4/DNPH coated denuders showed significantly less break-through potential and hence collection than the XAD-4-only coated denuders. The performance of the XAD-4/DNPH denuder was better under humid conditions with no detected break-through for hydroxyacetone, methacrolein, methylglyoxal, campholenic aldehyde and nopinone. Calibration experiments were performed in a simulation chamber and carbonyl-hydrazone concentrations determined in the extracts of both the denuder types were related to the mixing ratios of gaseous carbonyl compounds in the chamber to overcome losses and errors associating with the denuder sampling, extraction and sample preparation. The application of on-tube conversion for the XAD-4/DNPH denuders resulted in higher R(2) values than the XAD-4 denuder, ranging up to 0.991 for nopinone. The XAD-4-only coated denuders showed acceptable calibration curves only for lower vapour pressure carbonyl compounds though larger relative standard deviations (RSD) were observed. Carbonyl compounds that were formed during the oxidation of nopinone were collected using the XAD-4/DNPH denuders. The results showed that the denuder sampling device was able to provide reproducible nopinone mixing ratios that remained in the chamber after about 1h of the oxidation. One isomer of oxo-nopinones was tentatively identified from off-line HPLC/(-)ESI-TOFMS analysis. Based on the TOFMS response of the nopinone-DNPH derivative, the oxo-nopinone molar yield of 0.7±0.1% (n=3) was determined from the reaction of nopinone with OH radicals. Depending on target analytes, accuracy and sensitivity requirements, the present method can be employed for the determination of gaseous carbonyl compounds that are formed during the oxidation of monoterpenes.

Laboratory chamber studies on the formation of organosulfates from reactive uptake of monoterpene oxides.

Evidence from field measurements suggests that organosulfates contribute substantially to ambient secondary organic aerosol (SOA) and might dominate a considerable fraction of total sulfur in tropospheric particles. While alcohols and epoxides are suggested to be most likely precursors for organosulfates in SOA, their reactivity in acidic particles and their potential for organosulfate formation are still unclear. In the present study, a series of aerosol chamber experiments was performed to investigate the formation of organosulfates from reactive uptake of monoterpene oxides (alpha-pinene oxide and beta-pinene oxide) and acid catalysed isomerisation compounds of alpha-pinene oxide (campholenic aldehyde and carveol) on neutral and acidic sulfate particles. Organosulfate formation was observed only under acidic conditions for both monoterpene oxides and, to a lesser extent, campholenic aldehyde, indicating that epoxides most likely serve as precursors for some of the organosulfates reported from both ambient and laboratory SOA samples. Structures of organosulfates were elucidated by comparing the tandem mass spectrometric, accurate mass and ion mobility data obtained for both the synthesised reference compounds and aerosol chamber-generated organosulfates. In the experiment performed using beta-pinene oxide and acidic sulfate seed particles, an organosulfate with a sulfate group at a tertiary carbon atom accounts for 64% of the detected organosulfates. In contrast, an organosulfate with a sulfate group at a secondary carbon atom accounts for 80% of the detected organosulfates in the sample from alpha-pinene oxide/acidic sulfate particle experiment. The concentration of beta-pinene-derived organosulfates was higher than known alpha-pinene oxidation products such as pinic acid and pinonic acid in an ambient aerosol sample collected at a Norwegian spruce forest site during the summer time, ranging up to 23 ng m(-3). Furthermore, alpha-pinene oxide is found to isomerise readily on the wet seed particle surface, forming campholenic aldehyde. It is likely that other epoxides also play an important role for the formation of organosulfates under atmospheric conditions, and the isomerisation of epoxides may be an important route for the formation of some SOA constituents whose structures do not resemble precursor volatile organic compounds (VOCs).