RESUMO
The peak pressure of a granular debris flow at low Froude conditions can be calculated with knowledge of the stress anisotropy and the bulk density as well as the run-up height at impact. Based on a small-scale physical model, measurements of stress anisotropy and flow density values at impact are presented and applied to existing run-up prediction models, and further compared with back-calculated run-up coefficients from measured maximum impact pressures. For this purpose, we conducted 17 experiments with impact measurements and six experiments without impact measurements at Froude numbers, ranging from 0.84 to 2.41. Our results indicate that run-up heights are best reproduced by predictive models, either based on energy or mass and moment conservation, when anisotropic stress conditions, found in this study to range from 1.2 to 5.0, and bulk density variations due to impact, ranging in this study from 0.8 to 2.3, are considered. The influence of stress anisotropy and density variation on the run-up prediction differs, depending on the modelling approach. For the calculation of run-up heights based on the energy conservation concept, the influence of stress anisotropy becomes more significant with increasing Froude number, whereas for models based on mass and momentum conservation, bulk density variations have a greater influence on the estimation of the potential run-up.
RESUMO
Debris-flow activity is strongly controlled by hydro-meteorological trigger conditions, which are expected to change in a future climate. In this study we connect a regional hydro-meteorological susceptibility model for debris flows with climate projections until 2100 to assess changes of the frequency of critical trigger conditions for different trigger types (long-lasting rainfall, short-duration storm, snow-melt, rain-on-snow) in six regions in the Austrian Alps. We find limited annual changes of the number of days critical for debris-flow initiation when averaged over all regions, but distinct changes when separating between hydro-meteorological trigger types and study region. Changes become more evident at the monthly/seasonal scale, with a general trend of critical debris-flow trigger conditions earlier in the year. The outcomes of this study serve as a basis for the development of adaption strategies for future risk management.
RESUMO
A granular front emerges whenever the free-surface flow of a concentrated suspension spontaneously alters its internal structure, exhibiting a higher concentration of particles close to its front. This is a common and yet unexplained phenomenon, which is usually believed to be the result of fluid convection in combination with particle size segregation. However, suspensions composed of uniformly sized particles also develop a granular front. Within a large rotating drum, a stationary recirculating avalanche is generated. The flowing material is a mixture of a viscoplastic fluid obtained from a kaolin-water dispersion with spherical ceramic particles denser than the fluid. The goal is to mimic the composition of many common granular-fluid materials, such as fresh concrete or debris flow. In these materials, granular and fluid phases have the natural tendency to separate due to particle settling. However, through the shearing caused by the rotation of the drum, a reorganization of the phases is induced, leading to the formation of a granular front. By tuning the particle concentration and the drum velocity, it is possible to control this phenomenon. The setting is reproduced in a numerical environment, where the fluid is solved by a lattice-Boltzmann method, and the particles are explicitly represented using the discrete element method. The simulations confirm the findings of the experiments, and provide insight into the internal mechanisms. Comparing the time scale of particle settling with the one of particle recirculation, a nondimensional number is defined, and is found to be effective in predicting the formation of a granular front.
