Artificial leaf device for solar fuel production.

Solar fuels, such as hydrogen gas produced from water and methanol produced from carbon dioxide reduction by artificial photosynthesis, have received considerable attention. In natural leaves the photosynthetic proteins are well-organized in the thylakoid membrane. To develop an artificial leaf device for solar low-carbon fuel production from CO2, a chlorophyll derivative chlorin-e6 (Chl-e6; photosensitizer), 1-carboxylundecanoyl-1'-methyl-4,4'-bipyrizinium bromide, iodide (CH3V(CH2)9COOH; the electron carrier) and formate dehydrogenase (FDH) (the catalyst) immobilised onto a silica-gel-based thin layer chromatography plate (the Chl-V-FDH device) was investigated. From luminescence spectroscopy measurements, the photoexcited triplet state of Chl-e6 was quenched by the CH3V(CH2)9COOH moiety on the device, indicating the photoinduced electron transfer from the photoexcited triplet state of Chl-e6 to the CH3V(CH2)9COOH moiety. When the CO2-saturated sample solution containing NADPH (the electron donor) was flowed onto the Chl-V-FDH device under visible light irradiation, the formic acid concentration increased with increasing irradiation time.

Selective CO2 conversion to formate in water using a CZTS photocathode modified with a ruthenium complex polymer.

Highly selective photoelectrochemical CO(2) reduction (>80% selectivity) in water was successfully achieved by combining Cu(2)ZnSnS(4) (CZTS) with a metal-complex electrocatalyst. CZTS, a sulfide semiconductor that possesses a narrow band gap and consists of earth-abundant elements, is demonstrated to be a candidate photoabsorber for a CO(2) reduction hybrid photocatalyst.

Selective CO2 conversion to formate conjugated with H2O oxidation utilizing semiconductor/complex hybrid photocatalysts.

Photoelectrochemical reduction of CO(2) to HCOO(-) (formate) over p-type InP/Ru complex polymer hybrid photocatalyst was highly enhanced by introducing an anchoring complex into the polymer. By functionally combining the hybrid photocatalyst with TiO(2) for water oxidation, selective photoreduction of CO(2) to HCOO(-) was achieved in aqueous media, in which H(2)O was used as both an electron donor and a proton source. The so-called Z-scheme (or two-step photoexcitation) system operated with no external electrical bias. The selectivity for HCOO(-) production was >70%, and the conversion efficiency of solar energy to chemical energy was 0.03-0.04%.

Direct assembly synthesis of metal complex-semiconductor hybrid photocatalysts anchored by phosphonate for highly efficient CO2 reduction.

Hybrid photocatalysts consisting of a ruthenium complex and p-type photoactive N-doped Ta(2)O(5) anchored with an organic group were successfully synthesized by a direct assembly method. The photocatalyst anchored by phosphonate exhibited excellent photoconversion activity of CO(2) to formic acid under visible-light irradiation with respect to the reaction rate and stability.

Photosynthetic oxygen evolution in mesoporous silica material: adsorption of photosystem II reaction center complex into 23 nm nanopores in SBA.

An oxygen-evolving photosynthetic reaction center complex (PSII) was adsorbed into nanopores in SBA, a mesoporous silica compound. We purified the dimer of PSII complex from a thermophilic cyanobacterium, Thermosynechococcus vulcanus, which grows optimally at 57 °C. The thermally stable PSII dimeric complex has a diameter of 20 nm and a molecular mass of 756 kDa and binds more than 60 chlorophylls. The SBA particles, with average internal pore diameters of 15 nm (SBA(15)) and 23 nm (SBA(23)), adsorbed 4.7 and 15 mg of PSII/g SBA, respectively. Measurement with a confocal laser-scanning microscope indicated the adsorption of PSII to the surface and the inner space of the SBA(23) particles, indicating the adsorption of PSII into the 23 nm silica nanopores. PSII did not bind to the inner pores of SBA(15). PSII bound to SBA(23) showed the high and stable activity of a photosynthetic oxygen-evolving reaction, indicating the light-driven electron transport from water to the quinone molecules added in the outer medium. The PSII-SBA conjugate can be a new material for photosensors and artificial photosynthetic systems.

Photosynthetic electron transfer from reaction center pigment-protein complex in silica nanopores.

A photosynthetic reaction center (RC) pigment-protein complex purified from a thermophilic purple photosynthetic bacterium, Thermochromatium tepidum, was adsorbed to a folded-sheet silica mesoporous material (FSM). The RC has a molecular structure with a 7.0 x 5.0 x 13 nm diameter. The amount of RC adsorbed to the FSM compound with an average internal pore diameter of 7.9 nm (FSM(7.9)) was high at 0.29 gRC/gFSM, while that to the FSM(2.7) (2.7 nm diameter) was low at 0.02 gRC/gFSM, suggesting the specific binding of the RC into the 7.9 nm pores of FSM(7.9). An N(2)-adsorption isotherm study indicated the incorporation of the RC into the 7.9 nm pores. The RC inside FSM(7.9) showed absorption spectra in the visible and infrared regions similar to those of the RC in solution, indicating almost no structural changes induced by the adsorption. The RC-FSM(7.9) conjugate showed the high photochemical activity with the increased thermal stability up to 50 degrees C in the measurements by laser spectroscopy. The conjugates rapidly provided electrons to a dye in the outer medium or showed electric current on the ITO electrode upon the illumination. The RC-FSM conjugate will be useful for the construction of artificial photosynthetic systems and new photodevices.

Photoelectrochemical reduction of CO(2) in water under visible-light irradiation by a p-type InP photocathode modified with an electropolymerized ruthenium complex.

Photoelectrochemical reduction of CO(2) to HCOO(-) was successfully achieved by a p-type InP photocathode modified with an electropolymerized ruthenium complex in water. This technique decreased the required applied potential for CO(2) reduction by utilizing solar energy. The carbon and proton sources of HCOO(-) were identified by a tracer experiment to be CO(2) and H(2)O, respectively.

ATR-FTIR study of the protonation states of the Glu residue in the multicopper oxidases, CueO and bilirubin oxidase.

Redox-induced protonation state changes of the Glu residue in the multicopper oxidases, CueO and bilirubin oxidase (BO), were studied by attenuated total reflectance-Fourier transform infrared spectroscopy. By monitoring IR bands of the carboxylic acid C=O stretch in the wild-type and Glu-to-Gln mutant enzymes the Glu506 of CueO (Glu463 of BO) was found to be unprotonated in the oxidised and protonated in the reduced forms. The results provided direct evidence for proton uptake by the Glu, suggesting it plays a key role in the proton donation to the activated oxygen species in the catalytic cycle.

Redox-dependent domain rearrangement of protein disulfide isomerase coupled with exposure of its substrate-binding hydrophobic surface.

Protein disulfide isomerase (PDI) is a major protein in the endoplasmic reticulum, operating as an essential folding catalyst and molecular chaperone for disulfide-containing proteins by catalyzing the formation, rearrangement, and breakage of their disulfide bridges. This enzyme has a modular structure with four thioredoxin-like domains, a, b, b', and a', along with a C-terminal extension. The homologous a and a' domains contain one cysteine pair in their active site directly involved in thiol-disulfide exchange reactions, while the b' domain putatively provides a primary binding site for unstructured regions of the substrate polypeptides. Here, we report a redox-dependent intramolecular rearrangement of the b' and a' domains of PDI from Humicola insolens, a thermophilic fungus, elucidated by combined use of nuclear magnetic resonance (NMR) and small-angle X-ray scattering (SAXS) methods. Our NMR data showed that the substrates bound to a hydrophobic surface spanning these two domains, which became more exposed to the solvent upon oxidation of the active site of the a' domain. The hydrogen-deuterium exchange and relaxation data indicated that the redox state of the a' domain influences the dynamic properties of the b' domain. Moreover, the SAXS profiles revealed that oxidation of the a' active site causes segregation of the two domains. On the basis of these data, we propose a mechanistic model of PDI action; the a' domain transfers its own disulfide bond into the unfolded protein accommodated on the hydrophobic surface of the substrate-binding region, which consequently changes into a "closed" form releasing the oxidized substrate.

Photo-induced electron migrations in the nano-cavities of mesoporous silica sensitized by a cationic porphyrin dye.

Photo-induced redox reactions in a hybrid film of a cationic porphyrin dye (H2TMPyP) accommodated within a transparent mesoporous silica (MPS) film spin-coated on an FTO electrode have been investigated for such applications as the construction of efficient solar energy storage devices and novel light-stimulated sensors. In this system, anodic and cathodic photocurrents were observed under bias voltages of +0.3 V and -0.4 V, respectively. The action spectrum of the photocurrents corresponded well with the absorbance of the H2TMPyP molecules in the visible light region. Control experiments showed no photocurrents for the mesoporous silica without H2TMPyP. Our investigations showed that the H2TMPyP molecules function not only as a sensitizer but also as a mediator for electron migrations within mesoporous nano-cavities.

A bioelectrocatalysis method for the kinetic measurement of thermal inactivation of a redox enzyme, bilirubin oxidase.

The thermal stability of a redox enzyme, bilirubin oxidase (BOD), has been quantitatively evaluated by measuring the inactivation kinetics of BOD at several temperatures. The enzyme activity is directly related to the mediated bioelectrocatalytic current for the BOD-catalyzed reduction of O(2). Thus, the inactivation process is measured by the time-dependent decrease in the bioelectrocatalytic current. The results reveal that the inactivation obeys first-order kinetics, whose rate constants (k) are determined at pH 7.0 and at 50 - 70 degrees C. The half life of BOD activity, calculated from the k value at 50 degrees C is 114 min, which is in harmony with the thermal-stability data given in a catalog by Amano Enzyme Inc. The bioelectrocatalysis method allows in situ measurements of the inactivation kinetics in the period of a few minutes at relatively high temperatures. The rate constants show a large temperature dependence, leading to a large Arrhenius activation energy (E(A)) of 221 kJ mol(-1). The activation Gibbs energy (DeltaG(not equal)), activation enthalpy (DeltaH(not equal)), and activation entropy (DeltaS(not equal)) are also determined.

Fructose/dioxygen biofuel cell based on direct electron transfer-type bioelectrocatalysis.

One-compartment biofuel cells without separators have been constructed, in which d-fructose dehydrogenase (FDH) from Gluconobacter sp. and laccase from Trametes sp. (TsLAC) work as catalysts of direct electron transfer (DET)-type bioelectrocatalysis in the two-electron oxidation of d-fructose and four-electron reduction of dioxygen as fuels, respectively. FDH adsorbs strongly and stably on Ketjen black (KB) particles that have been modified on carbon papers (CP) and produces the catalytic current with the maximum density of about 4 mA cm(-2) without mediators at pH 5. The catalytic wave of the d-fructose oxidation is controlled by the enzyme kinetics. The location and the shape of the catalytic waves suggest strongly that the electron is directly transferred to the KB particles from the heme c site in FDH, of which the formal potential has been determined to be 39 mV vs. Ag|AgCl|sat. KCl. Electrochemistry of three kinds of multi-copper oxidases has also been investigated and TsLAC has been selected as the best one of the DET-type bioelectrocatalyst for the four-electron reduction of dioxygen in view of the thermodynamics and kinetics at pH 5. In the DET-type bioelectrocatalysis, the electron from electrodes seems to be transferred to the type I copper site of multi-copper oxidases. TsLAC adsorbed on carbon aerogel (CG) particles with an average pore size of 22 nm, that have been modified on CP electrodes, produces the catalytic reduction current of dioxygen with a density of about 4 mA cm(-2), which is governed by the mass transfer of the dissolved dioxygen. The FDH-adsorbed KB-modified CP electrodes and the TsLAC-adsorbed CG-modified CP electrodes have been combined to construct one-compartment biofuel cells without separators. The open-circuit voltage was 790 mV. The maximum current density of 2.8 mA cm(-2) and the maximum power density of 850 microW cm(-2) have been achieved at 410 mV of the cell voltage under stirring.

Photochemical electron transfer through [corrected] the interface of hybrid films of titania nano-sheets and mono-dispersed spherical mesoporous silica particles.

Photochemical Electron Transfer (ET) between an organic dye, the porphyrin derivative TMPyP, and an electron acceptor, methyl viologen MV2+, have been investigated at the interface of two different inorganic films, i.e., layered titania nano-sheets (TNS) and a monolayer film of spherical and mono-dispersed mesoporous silica (sMPS) particles (ca. 0.5 microm). TMPyP ions were intercalated within the sMPS nano-cavities to form (TMPyP-sMPS) while MV2+ ions were intercalated into the TNS interlayers to form (MV2+-TNS). The (TMPyP-sMPS) and (MV2+-TNS) films were then stacked on a silica substrate in this order to form a (MV2+-TNS)/(TMPyP-sMPS) film and, upon UV light irradiation, ET could be induced. However, when this film was stacked inversely, i.e., for the (TMPyP-sMPS)/(MV2+-TNS) films on a silica substrate, no photoinduced ET were observed. Interestingly, however, even for this photo-inactive inversely stacked film, ET could be generated by inserting a gold vapor-deposited layer between the (MV2+-TNS) and (TMPyP-sMPS) films. The conjugation conditions at the interface of the inversely stacked (TMPyP-sMPS)/(MV2+-TNS) hybrid film were, thus, confirmed to strongly affect the photoinduced electron transfers and their efficiencies.

Function of membrane protein in silica nanopores: incorporation of photosynthetic light-harvesting protein LH2 into FSM.

A high amount of functional membrane protein complex was introduced into a folded-sheet silica mesoporous material (FSM) that has nanometer-size pores of honeycomb-like hexagonal cylindrical structure inside. The photosynthetic light-harvesting complex LH2, which is a typical membrane protein, has a cylindrical structure of 7.3 nm diameter and contains 27 bacteriochlorophyll a and nine carotenoid molecules. The complex captures light energy in the anoxygenic thermophilic purple photosynthetic bacterium Thermochromatium tepidum. The amount of LH2 adsorbed to FSM was determined optically and by the adsorption isotherms of N2. The FSM compounds with internal pore diameters of 7.9 and 2.7 nm adsorbed LH2 at 1.11 and 0.24 mg/mg FSM, respectively, suggesting the high specific affinity of LH2 to the interior of the hydrophobic nanopores with a diameter of 7.9 nm. The LH2 adsorbed to FSM showed almost intact absorption bands of bacteriochlorophylls, and was fully active in the capture and transfer of excitation energy. The LH2 complex inside the FSM showed increased heat stability of the exciton-type absorption band of bacteriochlorophylls (B850), suggesting higher circular symmetry. The environment inside the hydrophobic silica nanopores can be a new matrix for the membrane proteins to reveal their functions. The silica-membrane protein adduct will be useful for the construction of new probes and reaction systems.

Phytol-modified heme in mesoporous silica: conjugates as models of hemoproteins.

A ferriprotoporphyrin, hemin (Fe(3+)), modified with 3,7,11,15-tetramethyl-2-hexadecen-1-ol, phytol, was adsorbed in nano-spaces of about 4 nm in diameter in mesoporous silica (FSM; folded-sheet mesoporous material) forming a phytol-modified hemin (Fe(3+))-FSM nano-conjugate. The properties and the structure of the conjugate were studied by UV-visible light absorption, IR absorption spectroscopy, and a nitrogen adsorption isotherm. Although the hemin without phytol could not be adsorbed to the mesoporous silica, modification with phytol imparted preferential adsorption properties. The conjugate was not only stable but also had a peroxidase-like activity in a 0.1% hydrogen peroxide solution, while free hemin in the solution was easily destroyed. The hemin (Fe(3+)) in the FSM was reduced to heme (Fe(2+)) by hydrazine. The phytol-modified heme (Fe(2+))-FSM conjugate formed an O(2)-heme complex with a superoxide type structure, resembling oxyhemoglobin or oxymyoglobin, which has not been previously observed for free heme in solution. The addition of carbon monoxide or nitrogen monoxide to the phytol-modified heme (Fe(2+))-FSM conjugate caused the formation of CO- or NO-heme complex in the nano-spaces of the FSM. These properties are attributed not only to the Fe-complex but also to the cooperative functions of the heme with mesoporous silica, resembling properties of a natural heme-protein conjugate; hemoglobin or peroxidase. These results are an elegant example of biomimetic nano-technology.

Interaction between a type-II dockerin domain and a type-II cohesin domain from Clostridium thermocellum cellulosome.

The interaction between the type-II dockerin domain of the scaffoldin protein CipA and the type-II cohesin domain of the outer layer protein SdbA is the fundamental mechanism for anchoring the cellulosome to the cell surface of Clostridium thermocellum. We constructed and purified a dockerin polypeptide and a cohesin polypeptide, and determined affinity constants of the interaction between them by the surface plasmon resonance method. The dissociation constant (K(D)) value was 1.8 x 10(-9) M, which is a little larger than that for the combination of a type-I dockerin and a type-I cohesin.

Cohesin-dockerin interactions within and between Clostridium josui and Clostridium thermocellum: binding selectivity between cognate dockerin and cohesin domains and species specificity.

The cellulosome components are assembled into the cellulosome complex by the interaction between one of the repeated cohesin domains of a scaffolding protein and the dockerin domain of an enzyme component. We prepared five recombinant cohesin polypeptides of the Clostridium thermocellum scaffolding protein CipA, two dockerin polypeptides of C. thermocellum Xyn11A and Xyn10C, four cohesin polypeptides of Clostridium josui CipA, and two dockerin polypeptides of C. josui Aga27A and Cel8A, and qualitatively and quantitatively examined the cohesin-dockerin interactions within C. thermocellum and C. josui, respectively, and the species specificity of the cohesin-dockerin interactions between these two bacteria. Surface plasmon resonance (SPR) analysis indicated that there was a certain selectivity, with a maximal 34-fold difference in the K(D) values, in the cohesin-dockerin interactions within a combination of C. josui, although this was not detected by qualitative analysis. Affinity blotting analysis suggested that there was at least one exception to the species specificity in the cohesin-dockerin interactions, although species specificity was generally conserved among the cohesin and dockerin polypeptides from C. thermocellum and C. josui, i.e. the dockerin polypeptides of C. thermocellum Xyn11A exceptionally bound to the cohesin polypeptides from C. josui CipA. SPR analysis confirmed this exceptional binding. We discuss the relationship between the species specificity of the cohesin-dockerin binding and the conserved amino acid residues in the dockerin domains.