Noncovalent Self-Assembly of Single-Layer MoS2 Nanosheets and Zinc Porphyrin into Stable SURMOF Nanohybrids with Multimodal Photocatalytic Properties.

A noncovalent integration of nanosheets of molybdenum disulfide (MoS2) and the zinc porphyrin complex Zn(II) 5,10,15,20-tetrakis(4-carboxyphenyl)porphine (ZnTCPP) through coordination bonding with metal clusters of zinc acetate (Zn[OAc]2) was applied for synthesis of stable hybrid nanomaterial avoiding surface prefunctionalization. The X-ray powder diffraction in combination with the BET nitrogen adsorption method confirms formation of a ZnTCPP-based surface-attached metal-organic framework (SURMOF) with micropores of 1.63 nm on the MoS2 nanosheets. Fluorescence spectroscopy confirmed Forster resonance energy transfer (FRET) between MoS2 and ZnTCPP without contact quenching. Fluorescent trapping with terephthalic acid for hydroxyl radicals and Sensor Green for singlet oxygen was applied for studying the pathways of photodegradation of model organic pollutant 1,5-dihydroxynaphthalene (DHN) in the presence of SURMOF/MoS2. Visible light initiates sensitization through the excitation of ZnTCPP generating singlet oxygen, whereas UV-light promotes either aerobic FRET-mediated "Z scheme" or anaerobic "Type II heterojunction" mechanisms. Owing to its multimodal photochemistry, the SURMOF/MoS2 hybrid showed comparatively high photocatalytic activity in UV-assisted degradation of DHN (keffUV = 4.0 × 10-2 min-1) as well as the antibacterial activity confirmed by E. coli survival test under visible light. Noncovalent self-assembly utilizing coordination bonding in SURMOFs as supramolecular adhesive to avoid surface premodification provides a basis for new types of multicomponent nanosystems with switchable functionalities by combining different 2D materials and chromophores in one hybrid structure.

One-Step Interfacial Integration of Graphene Oxide and Organic Chromophores into Multicomponent Nanohybrids with Photoelectric Properties.

A one-step protocol for interfacial self-assembly of graphene oxide (GO), glutamine-substituted perylene diimide (PDI-glu), 10,12-pentacosadiynoic acid (PCDA), and zinc acetate into three- and four-component hybrid nanofilms through hydrogen and coordination bonding was developed. The hybrids deposited onto solid supports were studied after polymerization of PCDA by UV-vis absorption, fluorescence, and Raman spectroscopies, scanning electron microscopy (SEM), and atomic force microscopy (AFM). The results of spectroscopic studies suggest that the hybrids assembled through H-bonds can maintain the light-induced Förster energy transfer from the PDI-glu chromophore to the conjugated polymer and then to GO leading to fluorescence quenching. In the hybrids assembled through coordination bonding with zinc clusters, the energy transfer proceeds from PDI-glu to the PDA polymer, whereas the transfer from PDA to GO is quenched completely. Another important characteristic of these ultrathin hybrids is their stability with respect to photobleaching of chromophores due to the acceptor properties of GO. The as-assembled hybrid nanofilms were integrated with conventional photovoltaic planar architectures to study their photoelectric properties. The zinc-containing hybrids integrated with a hole transport layer exhibited photovoltaic properties. The cell with the integrated four-component hybrid comprising both PDI-glu and PDA showed a photocurrent/dark current ratio almost an order higher than that of the three-component hybrid assembled with PDA only. The supramolecular method based on the interfacial self-assembly can be extended to a wide variety of organic chromophores and polymerizable surfactants for integrating them into multicomponent functional GO-based nanohybrids with targeted properties for organic electronics.

Ion-Driven Self-Assembly of Lanthanide Bis-phthalocyaninates into Conductive Quasi-MOF Nanowires: an Approach toward Easily Recyclable Organic Electronics.

Controlled self-assembly and rapid disintegration of supramolecular nanowires is potentially useful for ecology-friendly organic electronics. Herein, a novel method exploiting the binding between crown-substituted double-decker lanthanide phthalocyaninates (ML2, M = Lu, Ce, Tb) and K+ ions is applied for the one-step fabrication of macroscopically long conductive one-dimensional quasi-metal-organic frameworks. Their properties are controlled by the size of the lanthanide ion guiding the assembly through either intra- or intermolecular interactions. A LuL2 linker with a small interdeck distance yields fully conjugated intermolecular-bonded K+-LuL2 nanowires with a thickness of 10-50 nm, a length of up to 50 µm, and a conductivity of up to 11.4 S cm-1, the highest among them being reported for phthalocyanine assemblies. The large size of CeL2 and TbL2 leads to the formation of mixed intra- and intermolecular K+-ML2 phases with poor electric properties. A field-assisted method is developed to deposit aligned conductive K+-LuL2 assemblies on solids. The solid-supported nanowires can be disintegrated into starting components in a good aprotic solvent for further recycling.

Interfacial self-assembly of functional bilayer templates comprising porphyrin arrays and graphene oxide.

Fabricating of solid-supported hybrid nanostructures remains a challenging problem because it is difficult to control all interfacial interactions influencing the structure and stability of these systems. The most widely used approach to solving this problem is a bottom-up assembly on the surface templates such as self-assembled monolayers (SAMs). Herein we suggest an alternative approach to tailoring solid surfaces by a formation of an interlayer anchoring the nanostructured film to the solid substrate. We formed a multifunctional bilayer template (MBT), comprising an adhesive monolayer of graphene oxide and a functional ordered monolayer of metal organic compound (Zinc-tetra(4-pyridyl)porphyrin) directing further bottom-up growth of the nanostructures. The one-step assembly of MBT proceeded spontaneously at the air/water interface and was monitored by an in-situ fiber optic absorption and fluorescence spectroscopy in a Langmuir trough. Dilatation surface rheology was applied to study the evolution of molecular organization of the monolayers upon adding the zinc ions, GO and their mixture into the subphase. The MBT templates were used for the assembly of porphyrin-based SURMOFs with two different structures. Our strategy makes it possible to assemble surface-anchored nanostructures avoiding the use of SAMs and it can be extended to other types of ultrathin hybrid systems.

Understanding Self-Assembly of Porphyrin-Based SURMOFs: How Layered Minerals Can Be Useful.

Porphyrin-based metal-organic frameworks on surfaces are a new class of planar materials with promising features for applications in chemical sensing, catalysis, and organic optoelectronics at nanoscale. Herein, we studied systematically a series of the SURMOFs assembled from variously meso-carboxyphenyl/pyridyl-substituted porphyrins and zinc acetate on template monolayers of graphene oxide via layer-by-layer deposition. This microscopically flat template can initiate the growth of macroscopically uniform SURMOF films exhibiting well-resolved X-ray diffraction. By applying the D'yakonov method, which has been previously used for the extraction of self-convolution of electron density in clay minerals, to the analysis of the experimental diffraction patterns of the SURMOFs, we determined the relation between the structure of porphyrin linkers and the geometry of packing motives in the films. We showed that the packing of the SURMOFs differs significantly from that of bulk powders of similar composition because of steric limitations imposed on the assembly in 2D space. The results of microscopic examination of the SURMOFs suggest that the type of metal-to-linker chemical bonding dictates the morphology of the films. Our method provides an enlightening picture of the interplay between supramolecular ordering and surface-directed assembly in porphyrin-based SURMOFs and is useful for rationalizing the fabrication of various classes of layered metal-organic frameworks on solids.

Ultrathin Polydiacetylene-Based Synergetic Composites with Plasmon-Enhanced Photoelectric Properties.

Fabricating plasmon-enhanced organic nanomaterials with technologically relevant supporting architectures on planar solids remains a challenging task in the chemistry of thin films and interfaces. In this work, we report a bottom-up assembly of ultrathin layered composites of conductive polymers with photophysical properties enhanced by gold nanoparticles. The polydiacetylene component was formed by photopolymerization of a catanionic mixture of pentacosadiynoic surfactants on a surface of citrate-stabilized gold hydrosol monitored by a fiber optic spectrometer. Microscopic examination of the 3 nm thick solid-immobilized film showed that gold nanoparticles (AuNPs) do not aggregate within the monolayer upon polymerization. This polydiacetylene/AuNPs monolayer was coupled with 60 nm thick polyaniline-based layer deposited atop. The resulting polymer composite with an integrated 4-stripe electric cell showed nonadditive electric behavior due to the formation of electron-hole pairs with increased charge carrier mobility at the interface between the polymer layers. Under visible light irradiation of the composite film, a plasmonic effect of the gold nanoparticles was observed at the onset of photoconductivity, although neither polydiacetylene nor the polyaniline component alone are photoconductive polymers. The results indicate that our bottom-up strategy can be expanded to design other plasmon-enhanced ultrathin polymer composites with potential applications in optoelectronics and photovoltaics.

2D "soap"-assembly of nanoparticles via colloid-induced condensation of mixed Langmuir monolayers of fatty surfactants.

We describe a new type of colloidal 2D gels formed in mixed Langmuir monolayers of stearic acid and octadecylamine on a surface of gold hydrosol. The adsorption of gold nanoparticles on the mixed monolayer led to an increase of interactions between oppositely charged surfactants giving a "soap" of mixed fatty salt. The observed effect is equivalent to a virtual "cooling" of floating monolayer, which undergoes rapid condensation on a surface of aqueous colloid. The consequent shrinking and rearrangement of the monolayer resulted in aggregation of nanoparticles into colloidal 2D "soap"-gels, which represented arrested colloidal phases within nonadsorbing organic medium. When sequentially deposited onto solids by Langmuir-Blodgett technique, the 2D "soap"-gels separated into organic and colloidal phases and gave dendrite-like bilateral organic crystallites coated with gold nanoparticles. The reported colloidal "soap"-assembly can offer a new opportunity to design 2D colloidal systems of widely variable chemistry and structures.

Hydrogen-bond-guided self-assembly of nucleotides on a receptor-array surface.

The hydrogen-bond-guided self-assembly of 5'-ribonucleotides bearing adenine(A), cytosine (C), uracil (U), or guanine (G) bases from aqueous solution on a lipid-like surface decorated with synthetic bis(Zn(II)-cyclen) (cyclen=1,4,7,10-tetraazacyclodododecane) metal-complex receptor sites is described. The process was studied by using surface plasmon resonance spectroscopy. The data show that the mechanism of nucleotide binding to the 2D template is influenced by the chemistry of the bases and the pH value of the solution. In a neutral solution of pH 7.5, the process is cooperative and selective with respect to Watson-Crick pairs (A-U and C-G), which form stable double planes in accordance with the Chargaff rule. In a more acidic solution at pH 6.0, the interactions between complementary partners become non-cooperative and the surface also stabilizes mismatched and wobble pairs due to the pH-induced changes in the receptor coordination state. The results suggest that hydrogen bonding plays a key role in the self-assembly of complementary nucleotides at the lipid-like interface, and the cooperative character of the process stems from the ideal matching of the orientation and chemistry of all the interacting components with respect to each other in neutral solution.

Lateral 2D-3D phase segregation in fatty acid/fatty amine monolayers induced by langmuir-blodgett deposition.

We describe the formation of lateral 2D-3D patterns in mixed multilayer LB films of stearic acid (SA) and octadecylamine (ODA) deposited from aqueous subphases at a basic pH. The 3D particles of SA constituting the micrometer-scale linear assemblies in the LB film are assumed to segregate at the three-phase contact line in the course of film deposition. This 2D-3D phase separation of the two-component system presumably originates from the substrate-induced lowering of the collapse point of SA that leads to spontaneous 3D condensation of an acid on a solid support. The morphology of SA/ODA LB patterns is sensitively influenced by the deposition speed and surface pressure, while the chemistry of the solid support does not affect the resulting structures. The possible mechanism that controls the specific orthogonal arrangement of the 3D phase of SA in the LB film through wettability oscillations is suggested.

Two-dimensional arrays of amphiphilic Zn2+-cyclens for guided molecular recognition at interfaces.

The sterically guided molecular recognition of nucleobases, phosphates, adenosine, and uridine nucleotides on Langmuir monolayers and Langmuir-Blodgett monolayers of amphiphilic mono- or bis(Zn2+-cyclen)s assembled on thiolated surfaces was investigated. The stepwise selective binding of metal ions, uracil, or phosphate by dicetyl cyclen monolayers with variously tuned structures at the air/water interface was corroborated by the measurements of the corresponding LB films deposited onto quartz crystals. Two types of recognition surfaces were fabricated from Zn2+-dicetyl cyclen. The surface covered with a complex preformed in the Langmuir monolayer was capable both of imide and of phosphate binding. The similar complex formed directly in an LB film on thiolated gold was inactive with respect to imide. The surface plasmon resonance measurements evidenced the stepwise assembly of complementary nucleotides on SAM/LB templates through consecutive phosphate-Zn2+-cyclen coordination. Base pairing between nucleotides resulted in a formation of A-U bilayers comprising two complementary monolayers. Finally, we report on SAM/LB patterns designed for divalent molecular recognition of uridine phosphate by amphiphilic bis(Zn2+-cyclen).