Characterisation of Nanoclay and Spelt Husk Microfiller-Modified Polypropylene Composites.

Current research is devoted to the investigation of spelt husk (SH) and nanoclay-modified compatibilised polypropylene (PP) binary and ternary composites for injection-moulding applications. PP composites were obtained using twin-screw extrusion. The content of mechanically milled SH microfiller with aspect ratio within 2 and 6 was fixed at 40 wt.%, whereas the amount of nanoclay functional filler in the polypropylene matrix was changed in the range from 0.5 to 5 wt.%. Nanoclay filler was introduced in the polypropylene matrix either in the form of nanoclay powder (C) or as a masterbatch (M). Regular distribution of the clay nanofiller within the polymer matrix has been observed, disregarding its form and concentration. The effects of the individual or combined addition of SH microreinforcement and nanoclay fillers on the rheological, mechanical, calorimetric, and thermal properties of the developed PP composites were investigated. It is revealed that the addition of the nanoclay fillers insignificantly influences the viscosity of both PP nanocomposites and hybrid composites with SH. Additionally, for PP nanocomposites, remarkable increases in tensile and flexural modules and strength are observed by maintaining considerable ultimate deformations, mainly in the case of M-containing systems. Concomitantly, because of the addition of the nanoclay filler, the improvement in thermal stability of PP nanocomposites and PP hybrid composites with SH is observed. As a result of SH addition, considerable increases in tensile and flexural modules are also observed. Results of the research demonstrate the potential of the use of natural materials (agricultural residues and clay minerals) for the development of PP composites with increased stiffness and thermal properties.

Selective enrichment of heterotrophic nitrifiers Alcaligenaceae and Alcanivorax spp. from industrial wastewaters.

Removal of nitrogen from wastewaters (WW) represents a global problem. The low nitrification rate during WW treatment is often caused by ecotoxicity. This problem is attributed mostly to the industrial WW. Our study was focused on the testing of industrial WW and activated sludge (AS) with the aim to reveal the abundance of nitrifiers and increase their biomass, thus, providing the additional step, i.e., bioaugmentation, within the technological process of WW treatment. Plating of AS on the selective solidified media designated for the 1st and 2nd nitrification stages, resulted in the shift in bacterial community structure with dominated Alcaligenaceae and Alcanivorax for the 1st stage, and Alcanivorax-for the 2nd stage of nitrification, respectively. Incubation of AS in the presence of real WW and selective nitrification broth resulted in a considerable increase (one or two magnitudes in the presence of the 1st and 2nd stage nitrification broth, respectively) of culturable nitrifiers after 5 days incubation under aerated conditions. The obtained data provide with evidence about a possibility to strengthen the role of heterotrophic nitrifiers in the treatment of industrial WW, where toxicity obstacles inhibited nitrification under conventional conditions.