The final stages of dog rabies elimination from Japan.

Rabies is a lethal zoonotic disease mainly transmitted to humans by dog bites. The purpose of this study was to assess the efficacy of rabies control policies in Japan, which resulted in the elimination of the disease from the country in 1957. Using historical records from the Kanto region (Chiba, Kanagawa, Saitama and Tokyo Prefectures) between 1947 and 1956 where the final canine cases were recorded, we undertook a descriptive epidemiological study, applying spatio-temporal scan statistics using SaTScan and estimating the effective reproduction number (Rt ) for the clusters and each prefecture using the growth rates. There were 1,567 dog rabies and 161 human rabies cases recorded during this period. Vaccination coverage in registered dogs was over 70% after 1951, with much lower coverage in free-roaming and unregistered dogs. Eight clusters of dog rabies cases were identified: the first appeared in 1947 in Tokyo and was linked to three further clusters in peripheral prefectures between 1947 and 1951. Three more clusters occurred in Tokyo again between 1952 and 1954, and the last cluster was in Tokyo and Kanagawa between 1955 and 1956. Rt in the first cluster was 1.68, and Rt values in the others ranged between 1.18 and 1.86, with an exception of 4.05 in the smallest cluster in Tokyo in 1952 (10 cases). The moving average of Rt coincided with the clusters. As dog vaccination and dog management progressed, and the number of dog rabies cases declined, the moving average of Rt declined to below 1. Delays in the implementation of dog management policies in Kanagawa may have prolonged this last outbreak. These results demonstrate the effectiveness of coordinated control policy involving dog vaccination and management of free-roaming dog populations for rabies elimination.

Spatio-temporal epidemiology of animal and human rabies in northern South Africa between 1998 and 2017.

BACKGROUND: Rabies is a fatal zoonotic disease that is maintained in domestic dogs and wildlife populations in the Republic of South Africa. A retrospective study was conducted to improve understanding of the dynamics of rabies in humans, domestic dogs, and wildlife species, in relation to the ecology for three northern provinces of South Africa (Limpopo, Mpumalanga, and North-West) between 1998 and 2017. METHODS: A descriptive epidemiology study was conducted for human and animal rabies. Dog rabies cases were analyzed using spatio-temporal scan statistics. The reproductive number (Rt) was estimated for the identified disease clusters. A phylogenetic tree was constructed based on the genome sequences of rabies viruses isolated from dogs, jackals, and an African civet, and Bayesian evolutionary analysis using a strict time clock model. Several ecological and socio-economic variables associated with dog rabies were modeled using univariate analyses with zero-inflated negative binomial regression and multivariable spatial analyses using the integrated nested Laplace approximation for two time periods: 1998-2002 and 2008-2012. RESULTS: Human rabies cases increased in 2006 following an increase in dog rabies cases; however, the human cases declined in the next year while dog rabies cases fluctuated. Ten disease clusters of dog rabies were identified, and utilizing the phylogenetic tree, the dynamics of animal rabies over 20 years was elucidated. In 2006, a virus strain that re-emerged in eastern Limpopo Province caused the large and persistent dog rabies outbreaks in Limpopo and Mpumalanga Provinces. Several clusters included a rabies virus variant maintained in jackals in Limpopo Province, and the other variant in dogs widely distributed. The widely distributed variant maintained in jackal populations in North-West Province caused an outbreak in dogs in 2014. The Rt was high when the disease clusters were associated with either multiple virus strains or multiple animal species. High-risk areas included Limpopo and Mpumalanga Provinces characterized by woodlands and high temperatures and precipitation. CONCLUSION: Canine rabies was maintained mainly in dog populations but was also associated with jackal species. Rural communities in Limpopo and Mpumalanga Provinces were at high risk of canine rabies originating from dogs.

Excellent Moisture Stability and Efficiency of Inverted All-Inorganic CsPbIBr2 Perovskite Solar Cells through Molecule Interface Engineering.

All-inorganic lead halide perovskite solar cells (PSCs) have drawn widespread interest because of its excellent thermal stability compared to its organic-inorganic hybrid counterpart. Poor phase stability caused by moisture, however, has thus far limited their commercial application. Herein, by modifying the interface between the hole-transport layer (HTL) and the perovskite light absorption layer, and by optimizing the HTL for better energy alignment, we controlled the growth of perovskite, reduced carrier recombination, facilitated carrier injection and transport, and improved the PSC's power conversion efficiency (PCE) and moisture stability. When testing using a positive bias scan, we obtained a significant improvement in PCE, 9.49%, which is the champion efficiency of CsPbIBr2-based inverted PSC at present. The stability measurement shows that the passivated CsPbIBr2-based inverted PSCs can retain 86% of its initial efficiency after 1000 h preserved in ambient air with 65% relative humidity. This study paves a new way for enhancing the moisture stability and power conversion efficiency of CsPbIBr2-based PSCs.

Suppression of Iodide Ion Migration via Sb2S3 Interfacial Modification for Stable Inorganic Perovskite Solar Cells.

In mixed halide perovskite, the halide phase segregation is commonly observed due to halide ion migration, which causes severe stability issues in perovskite devices. Here, we directly revealed the iodide-migration process via potentiostatic treatment in CsPbIBr2 perovskite. The absence of iodide ions was reduced significantly via a Sb2S3 interfacial modification. We further employed the density functional theory (DFT) calculation to optimize the geometry positions at the perovskite interface and radial distribution functions (RDF) to analyze the atom perturbation. The simulation yielded a slight distortion of the perovskite lattice at the Sb2S3-CsPbIBr2 interface and iodide ion fluctuation was reduced due to the decrease of halide vacancies. In addition, the thermally stimulated current was calculated to evaluate the defect density in the modified perovskite device. Due to the Sb2S3 interaction with perovskite, the device became stable against humidity and maintained its photoactivity over 400 h. The champion efficiency of 9.31% with 26.31% improvement was obtained in modified CsPbIBr2 perovskite solar cells.

Niobium Incorporation into CsPbI2Br for Stable and Efficient All-Inorganic Perovskite Solar Cells.

All-inorganic perovskites are attracting increasing attention due to their superior thermal stability than that of the traditional CH3NH3PbI3, while their inferior phase stability in ambient conditions is still an unsolved issue. Here, for the first time, we report the incorporation of niobium (Nb5+) ions into the CsPbI2Br perovskite. Results indicate that Nb5+ can effectively stabilize the photoactive α-CsPbI2Br phase by the possible substitution of Pb2+. With 0.5% Nb doping, the carbon electrode-based all-inorganic perovskite solar cells achieved a high photoconversion efficiency value of 10.42%, 15% higher than that of the control device. The Nb5+ incorporation reduces the charge recombination in the perovskite, leading to a champion Voc value of 1.27 V and a negligible hysteresis effect. This work explicates the high compatibility of all-inorganic perovskite materials and unlocks the opportunities for the use of high-valence ions for perovskite property modification.

The Role of Lanthanum in a Nickel Oxide-Based Inverted Perovskite Solar Cell for Efficiency and Stability Improvement.

A high-performing inverted perovskite solar cell (PSC) always relies on the hole transporting layer (HTL) quality and its interfaces. This work investigates the impact of La incorporation within the NiOx matrix for defects passivation, thus leading to high charge extraction ability and stability without compromising its power conversion efficiency. In the presence of La, the La-NiOx quality is clearly improved; without the formation of pinholes. In addition, the inclusion of La alters the energy band alignment; consequently, enhancing the hole transportation and widening the Voc (>1 V), as compared to the pristine NiOx . The beneficial effect of La was further revealed through the photoluminescence measurement and density of states (DOS) analysis, in which trap states are passivated by La. More importantly, the perovskite solar cell, with La-NiOx as the HTL, exhibits 21 % enhancement in efficiency and a remarkable stability that is greater than that of pristine NiOx . This also unlocks an opportunity for commercialization.

High Electrical Conductivity 2D MXene Serves as Additive of Perovskite for Efficient Solar Cells.

MXenes, a newly intriguing family of 2D materials, have recently attracted considerable attention owing to their excellent properties such as high electrical conductivity and mobility, tunable structure, and termination groups. Here, the Ti3 C2 Tx MXene is incorporated into the perovskite absorber layer for the first time, which aims for efficiency enhancement. Results show that the termination groups of Ti3 C2 Tx can retard the crystallization rate, thereby increasing the crystal size of CH3 NH3 PbI3 . It is found that the high electrical conductivity and mobility of MXene can accelerate the charge transfer. After optimizing the key parameters, 12% enhancement in device performance is achieved by 0.03 wt% amount of MXene additive. This work unlocks opportunities for the use of MXene as potential materials in perovskite solar cell applications.

Visible-light-driven photocatalytic water oxidation catalysed by iron-based metal-organic frameworks.

An iron-based metal-organic framework, MIL-101(Fe), promotes photocatalytic water oxidation to produce oxygen from aqueous silver nitrate solution under visible-light irradiation. The finely dispersed iron-oxo clusters embedded as nodes of the porous framework would contribute importantly to the efficient promotion of the reaction as compared to bulk hematite (α-Fe2O3).

Evaluation of the copper(II) complexing ability of ultrafiltered humic acid by the solvent extraction method.

A commercial humic acid dissolved in water was fractionated to nine samples by means of ultrafiltration (UF); the nominal molecular weight used for UF membranes was 1 k-200 kDa. Concerning the nine samples, copper(II) complexing capacities (CuCC) and conditional stability constants (beta) of the formed copper(II) complexes were measured by a solvent extraction method. A total organic carbon (TOC) and the UV-VIS absorption ratio (E350 nm/E450 nm) were also measured. From a comparison of these data, it was found that a) humic acids in each fraction formed two kinds of copper(II) complexes with different stability; b) the beta values obtained from each fraction were almost the same; c) large CuCC values were observed in the molecular weight range from 10 kDa to 20 kDa and below 1 kDa; d) molecules with molecular weight higher than 50 kDa scarcely had any copper(II) complexing ability; e) the values of CuCC/TOC of each fraction were in the range from 1.7 to 3.4 x 10(-7) mol mg(-1).