Bond strength and microleakage of different types of cements in stainless steel crown of primary molar teeth.

BACKGROUND: The margin of crown is a significant area for plaque accumulations. Therefore, the ability of the cement to seal the margin is very important. The aim of the present study was to evaluate the bond (retentive) strength, microleakage, and failure mode of four different types of cements in stainless steel crown (SSC) of primary molar teeth. MATERIALS AND METHODS: In this experimental study, eighty extracted primary molar teeth were divided into two groups of forty teeth to test the microleakage and bond strength. The crowns were cemented according to the manufacturer guidelines with four cement types including self-cure glass ionomer, resin-modified glass ionomer, polycarboxylate, and resin cements. Stereomicroscope and universal testing machine were used to measure the microleakage and bond strength, respectively. For calculating the surface area of crowns, three-dimensional scanning was used. Furthermore, the failure mode was examined after the bond strength test. The cements surfaces and the tooth-cement interfaces were evaluated using scanning electron microscopy (SEM). The obtained values were analyzed using SPSS-23 software through Shapiro-Wilk and one-way analysis of variance tests. Means, standard deviations, medians, and interquartile ranges were calculated. P < 0.05 was considered as statistically significant in all analyses. RESULTS: Significant differences between microleakage (P = 0.001) and failure mode (P = 0.041) of the four types of cements were obtained. However, the mean bond strengths of the four groups did not differ significantly (P = 0.124). The obtained SEM images confirmed the results of bond strength and microleakage. CONCLUSION: Resin cement and resin-modified glass ionomer, respectively, showed superior properties and are recommended for use in SSCs of primary molar teeth.

Effects of Amoxicillin on the Structure and Mineralization of Dental Enamel and Dentin in Wistar Rats.

OBJECTIVES: The development of teeth is affected by genetic and environmental factors. Amoxicillin is a widely prescribed semi-synthetic antibiotic. Its most frequent side effects are gastrointestinal disorders and hypersensitivity reactions. The purpose of this study was to determine the effect produced by amoxicillin administration on dental enamel and dentin in Wistar rats. MATERIALS AND METHODS: Twelve pregnant adult Wistar rats were equally divided into four different groups. Negative controls were prescribed with a saline solution. Positive controls were prescribed with tetracycline (130 mg/kg). The other two groups were treated with amoxicillin doses of 50 and 100 mg/kg (every 8 hours), respectively. The treatments were daily administered by oral gavage from the 13th gestation day to the end of gestation. After birth, the offspring also received the same treatment as their mothers from day one to day twelve. After 24 hours, the newborns were sacrificed, the jaws were dissected, and the first molar teeth were collected. The samples were fixed in 10% formaldehyde solution and were histomorphologically and histopathologically observed to determine enamel and dentin abnormalities. RESULTS: The mean ameloblastic layer thickness, enamel thickness, odontoblastic layer thickness, and dentin thickness were significantly different in the tetracycline group and the amoxicillin 50 and 100 mg/kg groups compared to the control group. Also, dentin hypomineralization and vacuolization of the odontoblastic layer were observed in the tetracycline- and amoxicillin-treated groups. CONCLUSION: This study showed that amoxicillin interferes with amelogenesis and dentinogenesis and reduces enamel and dentin thickness.

Calcium enriched mixture cement for primary molars exhibiting root perforations and extensive root resorption: report of three cases.

In primary molars with root perforations of endodontic origin, tooth extraction and space maintainer are recommended. Calcium-enriched mixture (CEM) cement is a new biomaterial demonstrating favorable sealability/biocompatibility. This report presents a novel treatment modality for cases of primary molar teeth with root perforations associated with a periodontal lesion due to extensive inflammatory root resorption, whereby CEM was used as a perforation repair/pulpotomy biomaterial. Three cases of primary molar root perforations due to inflammatory resorption were selected; all cases were associated with furcal lesions of endodontic origin. Pulp chambers were accessed/irrigated with NaOCl; the root canal orifices were filled with CEM and restored with stainless steel crowns. Clinical/radiographic examinations up to 17 months revealed that all teeth were functional and free of signs/symptoms of infection and all had complete bone healing. Further trials are suggested to confirm CEM use for management of root perforations in primary molars exhibiting root perforation.

Comparison of various concentrations of tricalcium phosphate nanoparticles on mechanical properties and remineralization of fissure sealants.

OBJECTIVE: The aim of this study was to investigate the mechanical properties (flexural strength, micro-shear bond strength) and remineralizing potential of fissure sealants by adding various concentrations of ß-tricalcium phosphate nanoparticles. MATERIALS AND METHODS: This in-vitro study consisted of five experimental groups containing prepared nano-fisssure sealants (1-5 wt.% ß-TCP nanoparticles) and two control groups containing a prepared and a commercial fissure sealant. Flexural/micro-shear bond strength values were measured using Zwick test machine. Cavities on sixty healthy premolar teeth were filled with the fissure sealants containing 0-5 wt.% of nano ß-TCP. The samples were assessed for remineralization under scanning electron microscopy (SEM) and EDAX. Kolmogorov-Smirnov test, One-way ANOVA and Tukey's Post Hoc analysis/HSD were used to analyze the data. RESULTS: There was no significant difference between the flexural strengths/elastic modulus of the 0-5 wt.% nano ß-TCP groups (p>0.05). The average flexural strength/elastic modulus of the prepared fissure sealant group (0%) was significantly higher than the commercial fissure sealant group (Clinpro) (p<0.05). There was no significant difference between micro-shear bond strengths of the experimental groups (1-5 wt.%), and between the commercial and the prepared (0%) fissure sealant groups (p>0.05). Examining the samples under SEM showed a significant increase in thickness of the intermediate layer with increasing concentrations of ß-TCP nanoparticles (p<0.05). CONCLUSION: Addition of 1-5 wt.% ß-TCP nanoparticles to the fissure sealants significantly increased the remineralization potential without affecting the mechanical properties.