A novel concept and design for highly efficient photoelectrocatalytic materials with high performance, stability, and charge transport properties: development of an innovative next-generation green technology.

In semiconductors, generating charges via catalysis is a highly challenging task and characteristic of heterojunction photoanodes. A dithiophene-4,8-dione spin-coated film layer has a positive effect on the holes (positive charge carriers) for a long time in BHJ films in the solid state of materials. The photoexcited holes created in the BHJ film can persist for long periods of time, which is beneficial for catalytic reactions. In this study, a photoanode is electrically coupled to a hydrogen gas-evolving platinum cathode. When the photoanode is electrically coupled to a H2 gas evolving Pt cathode, curiously long-lived hole polaron states are observed on the timescale of seconds under operational conditions. These long-lived holes play a crucial role in enhancing the hydrogen peroxide oxidation performance of the film overlayer spin-coated onto the photoanode. The spin-coated film overlayer on the photoanode achieves the best oxidation performance for hydrogen peroxide of approximately 6.5 mA cm-2 at 1.23 VRHE without the need of a catalyst. This demonstrates the effectiveness of the overlayer in improving the catalytic performance of the photoanode with a better efficiency of 17.5% when using 851 nm excitation. This indicates that a relatively high percentage of incident photons at that specific wavelength is converted into photocurrent by the photoanode. This approach can lead to more efficient oxidation catalysis as demonstrated in the case of hydrogen peroxide oxidation.

2,3-Pyridine dicarboxylic acid functionalized gold nanoparticles: Insight into experimental conditions for Cr3+ sensing.

Selectivity of gold nanoparticles (AuNPs) depends upon surface functionality; small changes in structure or concentration bring significant changes in the behavior of AuNPs. In this study, citrate-capped AuNPs were functionalized with ortho-dicarboxylate substituted pyridine (2,3-PDCA) and detailed studies on experimental conditions were carried out to check the stability of AuNPs and response for Cr3+. Stability of PDCA-AuNPs was found sensitive to the pH, ionic strength of buffer and its type. Capping behavior of PDCA on C-AuNPs was examined by FTIR spectroscopy. Surface morphology and size of synthesized AuNPs were confirmed by AFM, XRD, and DLS techniques where particles were found 11nm in size, monodisperse and spherical in shape. Interaction of stabilized AuNPs was tested with various metal ions; where Cr3+ induced the changes in localized surface plasmon band (LSPR) of PDCA-AuNPs which leads to a color change from wine red to violet blue. The phenomenon is explained as cooperative effect of citrate and pyridine nitrogen on surface of AuNPs in contrary to meta-dicarboxylate substituted pyridine derivatives. Further, under optimized and controlled conditions Cr3+ shows linear response with decrease in absorbance at LSPR intensity of AuNPs (518nm). Moreover, to demonstrate the applicability of method, Cr3+ was determined in the presence of Cr (VI) which shows 96% recovery.

Characterization of Palm Fatty Acid Distillate of Different Oil Processing Industries of Pakistan.

Palm fatty acid distillate (PFAD) is cheap and valuable byproduct of edible oil processing industries. This study was designed to characterize PFAD collected from different local oil industries. AOCS methods were used for the determination of physicochemical parameters such as free fatty acid (FFA), saponification value (SV), iodine value (IV), peroxide value (PV) and moisture content. Fatty acid composition was analyzed using GC-MS. Moisture content of samples was found to be in the range between 0.06-7.50%, while FFA, SV, IV and PV were found to be 65.70-94.68%, 195.23-219.64 mg KOH/g, 38.49- 63.10 g I2/100 g, 1.09-16.50 meq/kg, respectively. Mean value of fatty acids in PFAD was found as 0.04% lauric, 0.42% myristic, 41.25% palmitic, 7.29% stearic, 41.58% oleic, 8.95 % linoleic, 0.04% eicosenoic, 0.27% arachidic, 0.07% docosanoic, and 0.05% tetracosanoic acid, respectively. Palmitic acid was found as dominant saturated fatty acid 38.63-45.30%, whereas oleic acid C18:1 n9 was major unsaturated fatty acid 33.54-44.05 % in PFAD.

Characteristics and Composition of a High Oil Yielding Castor Variety from Pakistan.

Keeping in view the versatile applications of castor oil in cosmetic, pharmaceutical and recently as renewable source, the present work is a step towards the commercialization of castor on large scale in Pakistan. The current study introduces a castor variety with high oil content. Initially seeds were physically examined for some physical parameters. Seed moisture, ash content and linear dimensions such as length, width and thickness were found to be 4.53%, 6.44%, 12.24 mm, 8.31 mm and 5.67 mm, respectively. For oil extraction, Soxhlet method was used which resulted in the high oil content 54.0%. For quality assessment of oil, physicochemical parameters were checked according to official standard AOCS methods and compared with ASTM specifications. The determined parameters were as follows; specific gravity 0.953 g/cm(-3), refractive index 1.431, viscosity 672.0 mPas.s, moisture content 0.32%, FFA 0.14%, IV 83.61 gI2/100 g, PV 2.25 meq/Kg and SV 186.0 mgKOH/g. Furthermore, fatty acid analysis of oil showed that, most abundant fatty acid was ricinoleic acid 94.59%, followed by palmitic 0.31%, linoleic 1.84%, oleic (n-9) 2.05%, oleic (n-10) 0.22%, stearic 0.45% and eicosenoic acid 0.53%. The detected fatty acids were compared with registered variety and varieties of other regions.

A simplified FTIR chemometric method for simultaneous determination of four oxidation parameters of frying canola oil.

Transmission Fourier transform infrared (FTIR) spectroscopic method using 100 µm KCl cell was applied for the determination of total polar compounds (TPC), carbonyl value (CV), conjugated diene (CD) and conjugated triene (CT) in canola oil (CLO) during potato chips frying at 180 °C. The calibration models were developed for TPC, CV, CD and CT using partial least square (PLS) chemometric technique. Excellent regression coefficients (R(2)) and root mean square error of prediction values for TPC, CV, CD and CT were found to be 0.999, 0.992, 0.998 and 0.999 and 0.809, 0.690, 1.26 and 0.735, respectively. The developed calibration models were applied on samples of canola oil drawn during potato chips frying process. A linear relationship was obtained between CD and TPC with a good correlation of coefficient (R(2)=0.9816). Results of the study clearly indicated that transmission FTIR-PLS method could be used for quick and precise evaluation of oxidative changes during the frying process without using any organic solvent.

Application of attenuated total reflectance Fourier transform infrared spectroscopy for determination of cefixime in oral pharmaceutical formulations.

A quick and reliable analytical method for the quantitative assessment of cefixime in orally administered pharmaceutical formulations is developed by using diamond cell attenuated total reflectance (ATR) Fourier transform infrared (FT-IR) spectroscopy as an easy procedure for quality control laboratories. The standards for calibration were prepared in aqueous medium ranging from 350 to 6000mg/kg. The calibration model was developed based on partial least square (PLS) using finger print region of FT-IR spectrum in the range from 1485 to 887cm(-1). Excellent coefficient of determination (R(2)) was achieved as high as 0.99976 with root mean square error of 44.8 for calibration. The application of diamond cell (smart accessory) ATR FT-IR proves a reliable determination of cefixime in pharmaceutical formulations to assess the quality of the final product.

Estimation of ibuprofen in urine and tablet formulations by transmission Fourier Transform Infrared spectroscopy by partial least square.

A rapid, reliable and cost effective analytical procedure for the estimation of ibuprofen in pharmaceutical formulations and human urine samples was developed using transmission Fourier Transform Infrared (FT-IR) spectroscopy. For the determination of ibuprofen, a KBr window with 500 µm spacer was used to acquire the FT-IR spectra of standards, pharmaceuticals as well as urine samples. Partial least square (PLS) calibration model was developed based on region from 1807 to 1,461 cm(-1) using ibuprofen standards ranging from 10 to 100 µg ml(-1). The developed model was evaluated by cross-validation to determine standard error of the models such as root mean square error of calibration (RMSEC), root mean square error of cross validation (RMSECV) and root mean square error of prediction (RMSEP). The coefficient of determination (R(2)) achieved was 0.998 with minimum errors in RMSEC, RMSECV and RMSEP with the value of 1.89%, 1.63% and 4.07%, respectively. The method was successfully applied to urine and pharmaceutical samples and obtained good recovery (98-102%).

Determination of essential elements (Cu, Fe and Zn) in juices of commercially available in Pakistan.

In present work, the concentration of essential elements, copper (Cu), iron (Fe) and zinc (Zn) were measured in ten different juices, to evaluate whether the intakes of under study nutrients accomplished within recommended permissible levels. Flame atomic absorption spectrometry (FAAS) was used to estimate and evaluate the levels of essential elements such as Cu, Fe and Zn in ten juice samples. The elements were analyzed prior to microwave assisted acid digestion (MAD). For comparison purpose, wet acid digestion (CAD) method was used for determination of essential elements. The accuracy of proposed method was evaluated by performing addition-recovery experiments to prove the reliability of the method. All obtained analytical results by MAD and CAD showed a good agreement at a 95% confidence level. The detection limits of Cu, Fe and Zn were 22.7 microg/L, 3.85 microg/L and 3.05 microg/L. The dietary intakes of all three studied elements have also been estimated.

Main fatty acid classes in vegetable oils by SB-ATR-Fourier transform infrared (FTIR) spectroscopy.

The prospect of using single bounce attenuated total reflectance (SB-ATR)-Fourier transform infrared (FTIR) spectroscopy as a rapid quantitative tool to determine the main fatty acid groups present in different edible oils was investigated. Partial least squares (PLS) calibrations were developed using SB-ATR-FTIR spectra which were associated with fatty acid groups (saturated, trans, mono- and polyunsaturated) using quantitative data obtained by gas chromatography (GC). Good calibrations were obtained for all main four fat groups (saturated, mono, trans and polyunsaturated) with excellent precision. The coefficient of determination (R(2)), root mean square error of prediction (RMSEP) and bias for validation set were obtained as 0.999, 2.43 and 0.998 for saturated; 0.999, 1.850 and 0.003 for mono; 0.999, 0.625 and -0.001 for trans while for poly the values were 0.999, 1.170 and 0.003, respectively. The results of 13 validation samples for total saturated, mono, trans and polyunsaturated fats by FI-IR were found in the range of 8.16-55.16, 37.62-74.75, 0.20-18.16 and 1.36-62.35%, respectively. The present study shows that it may well be possible to expand the utility of SB-ATR-FTIR spectroscopy not only to provide isolated trans data, but also serve as a simple, rapid and quantitative means of categorizing the main groups present in the edible oils. The information obtained would be useful for meeting the new lipid nutritional labeling requirements.

Application of microwave heating for the fast extraction of fat content from the poultry feeds.

A rapid method has been developed to extract and quantitatively measure the total oil content in poultry feeds using a domestic microwave oven. The optimized extraction procedure involves the replicate (6x) extraction of 5 g of ground feed with 12 ml of hexane for 20 s in a 900 W oven. Each replicate involves the collection of the resulting miscella and its replacement with fresh solvent for re-extraction. The collected extracts were centrifuged and transferred to a vial. The solvent was evaporated to a constant weight and the residual lipid weighed. In comparison to conventional Soxhlet extraction method, lipid contents obtained using the optimized microwave procedure was not significantly different. However, FTIR analysis indicated that the microwave procedure was superior in minimizing the formation of free fatty acids (FFA) relative to the Soxhlet procedure if the temperature of the sample was kept within the range of 45-50 degrees C. This simple, sequential extraction procedure is rapid, highly efficient and provides a simple mean of quantitating the lipid content of poultry feed in less than 40 min without the need for specialized microwave oven.

GC-MS quantification of fatty acid profile including trans FA in the locally manufactured margarines of Pakistan.

Ten margarine brands of Pakistan were analyzed for their fatty acid composition with emphasis on trans fatty acids (TFA) using GC-MS. Saturated, cis-monounsaturated and polyunsaturated fatty acids were present at 24.2-58.1, 5.7-35.4 and 3.8-37.4% of total fatty acids, respectively. Among the saturated fatty acids, palmitic acid (16.9-33.8%) was dominant in all analyzed margarine brands and its higher amount indicates that palm oil was a major contributor in the margarine manufacturing. Among samples tested only one contained a low level of TFA (2.2%) while the rest contained very high amounts of TFA (11.5-34.8%) which clearly shows that hydrogenated oils were used in the formulation of margarines. Fatty acid profiles demonstrated that all samples belong to the hard margarine category containing high amounts of trans and saturated fatty acids which is an alarming issue for the health of consumers.