Retrospective study of the deep circumflex iliac artery flap and the vascularized fibula free flap for maxillary defect repair.

OBJECTIVES: The deep circumflex iliac artery flap (DCIA) and vascularized fibular free flap (FFF) are mainstay flaps for maxillary defect reconstruction. This study compared the functional outcomes and success rates of these flaps to provide midface reconstruction strategies. MATERIALS AND METHODS: Maxillary defects reconstructed with DCIA or FFF at the Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology between May 2016 and May 2023 were retrospectively analyzed. The length, width, and height of the grafted bone segments; intermaxillary distance; buttress reconstruction rate (BRR); dental arch reconstruction rate (DAR); success rate; and dental implantation rate were compared. RESULTS: The DCIA and FFF groups had 33 and 27 patients, respectively. Success rate in the DCIA group was 93.94 % and 100 % in the FFF group. The DCIA length was less than that of FFF; however, the width and height were significantly larger. 87.10 % of cases in the DCIA group were classified as Brown class b and c, 51.85 % of cases in the FFF group were classified as Brown class d. The average BRR in the DCIA group was 69.89 % ± 16.05 %, which was significantly higher than that in the FFF group. A total of 38.7 % and 11.1 % patients in the DCIA and FFF groups, respectively, had completed implantation. CONCLUSION: DCIA has a greater width and height, and is more suitable for repairing Brown class b and c defects, providing sufficient bone for implantation, while the FFF is longer and more suitable for Brown class d defect reconstruction.

One-stage jaw reconstruction and prosthetic rehabilitation with an iliac flap: a case report and literature review.

BACKGROUND: One-stage jaw reconstruction with fibular flap and prosthetic rehabilitation restores bony and dental continuity simultaneously. It was also called as "jaw-in-a-day (JIAD)" technique. However, bone volume and height of fibular flap may be insufficient for dental implant insertion. The provision of a considerable amount of bone makes an iliac flap the ideal choice in these cases. We present the first case report to document the use of one-stage jaw reconstruction and prosthetic rehabilitation with the iliac flap. CASE PRESENTATION: We modified the conventional JIAD workflow to make it suitable for iliac flap. Two cases were presented who both underwent segmental mandibulectomy for ameloblastoma. Virtual surgical planning was performed in all cases. The iliac crest was positioned upward to provide cortical bone for achieving primary stability of dental implants. Similar to the "all-on-4" procedure, the iliac bone was placed 12 to 15 mm below the occlusal plane to create adequate space for the implant-retained prosthesis. Immediate implant-based dental rehabilitation was performed at same stage. The surgery was successful in all cases without any short-term complications. In the first postoperative week, patients were given a liquid diet through a nasal feeding tube. The liquid diet is advised until 1 month after the surgery. Thereafter, a soft diet is recommended. Patients were advised to resume routine mastication and normal diet 3 months after the surgery. Peri-implantitis occurred in one patient, and additional gingival graft was required. Postoperative function and esthetics were satisfactory at the last follow-up visit. CONCLUSIONS: One-stage jaw reconstruction and prosthetic rehabilitation with the iliac flap are safe and useful for restoring postoperative function and esthetics. It should be used in more cases with a longer follow-up in further studies.

sPLA2GIB Promotes PGD2 and IL-13 Production in Eosinophilic Chronic Rhinosinusitis with Nasal Polyps.

OBJECTIVE: Secreted phospholipase A2 Group IB (sPLA2GIB) regulates the release of arachidonic acid, prostaglandins, and other inflammatory lipid mediators. Although it has been well involved in extensive inflammatory diseases, its specific mechanism in chronic rhinosinusitis with nasal polyps (CRSwNP) remains unclear. In this study, we investigated the role of sPLA2GIB in the pathophysiology of CRSwNP. METHODS: Quantitative PCR, immunofluorescence staining, western blotting, and enzyme-linked immunosorbent assay (ELISA) were used to analyze the expression of sPLA2s, phospholipase A2 receptor (PLA2R), and prostaglandin D2 (PGD2) in nasal samples. Human nasal epithelial cells (HNECs) were cultured at an air-liquid interface (ALI) and stimulated with various cytokines. The human mast cell line HMC-1 was stimulated with sPLA2GIB, and the expression of PGD2 and cytokines in the culture supernatant was detected by ELISA. RESULTS: The mRNA and protein levels of sPLA2GIB were significantly higher in eosinophilic CRSwNP than in control tissues. sPLA2GIB was predominantly expressed in the nasal epithelial cells. PLA2R mRNA and protein levels were upregulated in both eosinophilic and non-eosinophilic CRSwNP compared with the control groups. IL-4, IL-13, TNF-α, and IL-1ß upregulated the expression of sPLA2GIB in ALI-cultured HNECs. sPLA2GIB induced PGD2 and IL-13 production in HMC-1 cells in a hydrolytic activity-independent manner. PGD2 protein expression was elevated in tissue homogenates of eosinophilic CRSwNP, and PGD2 upregulated the expression of IL-13 in HMC-1 cells. CONCLUSION: Increased secretion of sPLA2GIB by epithelial cells may promote eosinophilic inflammation in CRSwNP by enhancing PGD2 and IL-13 production in mast cells via binding to PLA2R. LEVEL OF EVIDENCE: N/A Laryngoscope, 134:1107-1117, 2024.

A comparison of accuracy among different approaches of static-guided implant placement in patients treated with mandibular reconstruction: A retrospective study.

OBJECTIVE: This study aimed to evaluate the differences in the accuracy of immediate intraoral, immediate extraoral, and delayed dental implant placement with surgical guides (static computer-aided implant surgery) in patients treated with mandibular reconstruction. METHODS: This was a retrospective study. The patients were divided into three groups: immediate intraoral placement (IIO), immediate extraoral placement (IEO), and delayed placement (DEL). Four variables were used to compare the planned and actual implant positions: angular deviation, three-dimensional (3D) deviation at the entry point of the implant, 3D deviation at the apical point of the implant, and depth deviation. RESULTS: The angular deviation was significantly higher in the IIO group than in the IEO (p < .05) and DEL (p < .05) groups. The 3D deviation at the entry point was significantly higher in the IIO group than in the IEO (p < .05) and DEL (p < .01) groups. The 3D deviation at the apical point was significantly higher in the IIO group than in the IEO (p < .01) and DEL (p < .01) groups. The depth deviation was significantly higher in the IIO group than in the IEO (p < .05) and DEL (p < .05) groups. There was no statistical difference between the IEO and DEL group in angular and 3D deviation. CONCLUSION: With surgical guides, among the different approaches for implant placement, delayed implant placement remains the most accurate approach for patients treated with mandibular reconstruction.

Reconstruction of the anterior maxillary defect using a vascularized bone flap with residual teeth in the posterior maxilla.

BACKGROUND: Microsurgical bone reconstruction is challenging in cases of anterior maxillary defects because of the presence of residual teeth. The study analyzed the method and feasibility of using vascularized bone flaps to reconstruct anterior maxillary defects. METHODS: We retrospectively analyzed 15 patients treated at the Department of Oral and Maxillofacial Surgery, Peking University School, and Hospital of Stomatology between November 2017 and January 2023. RESULTS: A total of 14 patients were successfully reconstructed using the digital technique: 6 deep circumflex iliac artery (DCIA) flaps and 8 fibular free flaps. Palatal and buccal pedicle paths were used in 4 and 10 cases, respectively, for vascular anastomosis. The implant coverage rates of the DCIA and fibular free flaps were 87.2% and 92.6%, respectively (p > 0.05). CONCLUSION: Anterior maxillary defects reconstructed with the DCIA and fibular free flaps are reliable methods. Furthermore, the palatal and buccal paths are recommended for vascular anastomosis.

The effect of anterior superior iliac spine preservation on donor site morbidity and function after harvesting a vascularized iliac bone flap.

BACKGROUND: The purpose of this study was to investigate the effect of anterior superior iliac spine (ASIS) preservation on donor site morbidity and function after harvesting a vascularized iliac bone flap (VIBF). METHODS: Patients who underwent jaws reconstruction with VIBF were divided into a maintaining the anterior superior iliac spine (MASIS) group and a not maintaining the anterior superior iliac spine (NMASIS) group. Pain, tenderness, sensory deficit, gait disturbance, and function of the donor site were evaluated before and after the operation. RESULTS: Thirty-three patients were included in this study, of which 18 were in the MASIS group. The incidence of sensory deficit in the MASIS group was significantly lower than that in the NMASIS group (50.0% vs. 86.7%, p = 0.010). Pain, tenderness, gait disturbance, and function did not differ statistically between the two groups. CONCLUSION: Except for sensory deficit, ASIS preservation has minimal impact on donor site morbidity and function.

Clinical Characterization of Oral and Maxillofacial Tumors and Tumor-Like Lesions in Children and Adolescents.

PURPOSE: To investigate the clinical characteristics of oral and maxillofacial tumors in children and adolescents. METHODS: This is a retrospective study of patients who had oral and maxillofacial tumors under the age of 18 years and were treated at the Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology from January 1990 to July 2021 (31 y). Their general conditions, pathological diagnosis, gender, age, and anatomical location were counted to analyze their morbidity and composition characteristics. RESULTS: This study contained 5405 cases, including 2903 male patients and 2502 female patients, with a median age of 9 years. Peak incidence was observed in the 14 to 18 years age group. The mandible (22.15%), maxilla (11.75%), and tongue (9.25%) were the most common sites of incidence. Malignant and intermediate type tumors accounted for 13.04%, benign tumors and tumor-like lesions for 55.67%, most often occurs in the maxillofacial bone, of which fibro-osseous lesions constitute an important part. Cysts accounted for 31.29%. Among the tumors occurring in the jaws, the most common malignant type was sarcoma, and ameloblastoma was the most common benign tumor. Malignant jaw tumors were mostly treated by resection, 10.64% by fibular flap reconstruction. While benign jaw tumors and tumor-like lesions were mostly treated by resection or curettage. CONCLUSIONS: The distribution of anatomical location and pathological types of oral and maxillofacial tumors in children has certain characteristics, so that the selection of their treatment options is different from that of adults due to the consideration of the growth and developmental characteristics of children.

Perturbated glucose metabolism augments epithelial cell proinflammatory function in chronic rhinosinusitis.

BACKGROUND: Glucose concentrations are increased in nasal secretions in chronic rhinosinusitis (CRS). However, the glucose metabolism and its contribution to disease pathogenesis in CRS remain unexplored. OBJECTIVES: We sought to explore the glucose metabolism and its effect on the function of nasal epithelial cells in CRS with and without nasal polyps (CRSwNP and CRSsNP). METHODS: Glucose metabolites were detected with mass spectrometry. The mRNA levels of glucose transporters (GLUTs), metabolic enzymes, and inflammatory mediators were detected by quantitative RT-PCR. The protein expression of GLUTs was studied by immunofluorescence staining, Western blotting, and flow cytometry. Glucose uptake was measured by using fluorescent glucose analog. Human nasal epithelial cells (HNECs) were cultured. Bioenergetic analysis was performed with Seahorse XF analyzer. Gene expression in HNECs was profiled by RNA sequencing. RESULTS: Increased glucose concentrations in nasal secretions was confirmed in both CRSsNP and CRSwNP. GLUT4, GLUT10, and GLUT11 were abundantly expressed in HNECs, whose expression was upregulated by inflammatory cytokines and D-glucose and was increased in CRS. Glucose uptake, glycolysis and tricarboxylic acid cycle metabolites, metabolic enzymes, and extracellular acidification rate and oxygen consumption rates were increased in HNECs in CRSsNP and CRSwNP, with a predominant shift to glycolysis. HNECs treated with high-level apical D-glucose showed enhanced glucose uptake, predominant glycolysis, and upregulated production of IL-1α, IL-1ß, TNF-α, CCL20, and CXCL8, which was suppressed by 2-deoxy-D-glucose, an inhibitor of glycolysis. CONCLUSIONS: Increased glucose in nasal secretions promotes glucose uptake and predominant glycolysis in epithelial cells, augmenting the proinflammatory function of epithelial cells in CRS.

Vascularized Free Fibular Flap in Oral and Maxillofacial Reconstruction: A 20-year Experience at a Single Institution Using 2640 Flaps.

BACKGROUND: This retrospective study reviewed all patients who underwent oral and maxillofacial reconstruction with fibular flaps in the last 2 decades at a single hospital. MATERIALS AND METHODS: We reviewed all patients with fibular flaps from 1999 to 2018. The following data were collected: sex; age; reconstruction region; diagnosis; the number of days spent in the hospital after surgery; time spent using a tourniquet for harvesting a fibula flap; vessels at the recipient site; the prevalence of unplanned reoperations; the prevalence of flap failure; history of preoperative radiotherapy; virtual surgical planning; segments of the fibula. RESULTS: In total, 2640 patients were included. The mean age was 45.5 years. The most prevalent region of reconstruction was the mandible (n=2347, 88.9%). The most common diagnosis was squamous cell carcinoma (n=1057, 40.0%). The mean number of days spent in the hospital after surgery decreased year-by-year from 18.3 days to 10.4 days. The first choice of recipient artery was the facial artery (n=1643, 62.2%) and that of the recipient vein was the external jugular vein (n=1196, 45.3%). The prevalence of surgical success was 97.6%. Prevalence of unplanned reoperations was 7.5%. CONCLUSIONS: The fibular flap was a good choice for oral and maxillofacial bony reconstruction in most cases.

Iliac crest towards alveolar processes or mandibular inferior margin in mandibular reconstruction with a vascularized iliac bone flap: which is better?

OBJECTIVE: The study aims to compare differences among iliac bone flaps with different iliac crest orientations for the repair of mandibular defects with an aim to analyze their advantages, disadvantages, and effects. MATERIAL AND METHODS: Clinical data and computed tomography scans of all patients who underwent iliac bone flap repair of the mandible in Peking University School and Hospital of Stomatology from January 2016 to April 2021 were collected. Patients were divided into the iliac crest towards alveolar process (Group A) and the iliac crest towards mandibular inferior margin (Group B). Software was used to measure corresponding indicators. The results obtained for the groups were statistically analyzed. RESULTS: The study included 78 patients (25 and 53 in groups A and B, respectively). The symmetry of the LC-type defect was better in group A (p < 0.05). The all-bone width of the alveolar process side in group A was greater than 6 mm; in 15 cases of group B, the width was less than 6 mm (p < 0.05). The intermaxillary distance of two sites were higher in group B (p < 0.05). The bone cortical thickness was significantly thicker in group A (p < 0.05). CONCLUSION: One year after the mandibular body defect was reconstructed with a vascularized iliac bone flap, the iliac crest towards alveolar process group showed better bone symmetry, width, intermaxillary distance, and cortical thickness to meet the planting requirements. CLINICAL RELEVANCE: The use of an iliac crest towards alveolar process may be a better approach for mandible reconstruction.

In Vivo Oral Sentinel Lymph Node Mapping by Near-Infrared Fluorescent Methylene Blue in Rats.

This study aimed to demonstrate the feasibility of near-infrared (NIR) fluorescence imaging using methylene blue (MB) for detecting oral sentinel lymph nodes (SLNs) in rats and compared MB's tracer effects with those of indocyanine green (ICG) in SLN mapping. Different concentrations of MB were injected into the rats' left lingual submucosa to determine the optimal concentration by using a continuous (1 h) MI-1 fluorescence imaging system. To compare the tracer effects of the optimal MB concentration with ICG in oral SLN mapping, MI-1 imaging was continuously monitored for 12 h. The mean signal-to-background ratio (SBR) of the SLNs and SLN fluorescence area fraction were analyzed. SLNs and lymphatic vessels were clearly visible in all rats. The optimal injection dose of MB infected into lingual submucosa for NIR fluorescence imaging was 0.2 mL of 6.68 mM MB. During continuous monitoring for 12 h, the mean SBR of the SLNs was significantly higher in the ICG groups than in the MB groups (p < 0.001). However, the area fraction of SLN fluorescence in the ICG groups increased continuously, owing to strong fluorescent contamination. This study examined the feasibility of detection of draining lymph nodes in the oral cavity of rats using MB NIR fluorescence imaging. MB causes less fluorescent contamination than does ICG, which shows promise for clinical research and application.

Mandibular Reconstruction Using Iliac Flap Based on Occlusion-Driven Workflow Transferred by Digital Surgical Guides.

PURPOSE: The current standard for mandibular reconstruction is a contour-based approach using a fibular flap offering good cosmetic results but challenging to reconstruct using dental implants. An iliac flap is more amenable to implant placement and better suited for occlusion-driven reconstruction. We aimed to describe an occlusion-driven workflow that involves the use of digital surgical guides to perform mandibular reconstruction using an iliac flap; we also aimed to compare our results to those we achieved with conventional contour-based reconstruction. METHODS: This was a retrospective cohort study. All patients who underwent mandibular reconstruction with an iliac flap at our university hospital between September 2017 and December 2019 were considered eligible for the study. The inclusion criteria included mandibular defects after tumor ablation and stable preoperative occlusal relationship. The exclusion criteria were as follows: defects involving the condyle and ramus, temporomandibular joint disease, and obvious preoperative nontumor-related facial asymmetry. To evaluate surgical outcomes, patients were assigned to 2 groups based on the implemented surgical workflow: the occlusion-driven and traditional contour-driven groups. The intermaxillary distance, intermaxillary angle, surface deviation, and implantation rates were compared between the 2 groups. The operating time, length, and number of iliac bone segments were recorded. Intergroup differences were investigated using an independent samples t test and Fisher exact test. RESULTS: Overall, 24 patients were included (13 in the occlusion-driven group and 11 in the contour-driven group). Implantation rate was higher in the occlusion-driven group (61.5%) compared with the contour-driven group (18.2%; P = .047). The average acceptable intermaxillary distance was greater in the occlusion-driven group (92.3 ± 27.7%) than in the contour-driven group (47.0 ± 47.6%; P = .01). The average intermaxillary angle was 88.2 ± 8.4° in the occlusion-driven group and 76.4 ± 10.3° in the contour-driven group (P < .01). CONCLUSIONS: Digital surgical guides can precisely transfer virtual surgical planning to real-world mandibular surgery. An occlusion-driven workflow might provide a better intermaxillary jaw relationship than traditional contour-driven surgical procedures, resulting in improved mastication.

MEX3A promotes nasopharyngeal carcinoma progression via the miR-3163/SCIN axis by regulating NF-κB signaling pathway.

Mex-3 RNA Binding Family Member A (MEX3A) is an RNA-binding protein that plays complex and diverse roles in the development of various malignancies. However, its role and mechanism in nasopharyngeal carcinoma (NPC) remain undefined and were therefore evaluated in this study. By analyzing Gene Expression Omnibus data and using tissue microarrays, we found that MEX3A is significantly upregulated in NPC and negatively associated with prognosis. Notably, MEX3A depletion led to decreased cell proliferation, invasion, and migration, but increased apoptosis in NPC cells in vitro, while inhibiting tumor growth in vivo. Using whole-transcript expression arrays and bioinformatic analysis, we identified scinderin (SCIN) and miR-3163 as potential downstream targets of MEX3A in NPC. The regulatory mechanisms of MEX3A, SCIN and miR-3163 were further investigated using rescue experiments. Importantly, SCIN depletion and miR-3163 inhibition reversed and rescued the oncogenic effects of MEX3A, respectively. Moreover, NF-κB signaling inhibition reversed the oncogenic effects of both SCIN and MEX3A. In summary, our results demonstrate that MEX3A may promote NPC development and progression via the miR-3163/SCIN axis by regulating NF-κB signaling, thus providing a potential target for NPC treatment.

Virtual Surgical Planning of Deep Circumflex Iliac Artery Flap for Midface Reconstruction.

OBJECTIVE: Midface reconstruction is challenging for functional and esthetic reasons. The present study analyzed the effect of virtual surgical planning (VSP) of the deep circumflex iliac artery (DCIA) flap for midface reconstruction. PATIENTS AND METHODS: Thirty-four patients who underwent midface reconstruction with the DCIA flap were included in this retrospective study. Of the 34 patients, 16 underwent preoperative VSP, which used a three-dimensionally printed surgical guide, computer-assisted navigation system, and pre-bent titanium implants to transfer VSP into real-world surgery. The other 18 patients underwent traditional midface reconstruction. The following were compared between the two groups: bony contact rate in the buttress region (BCR), dental arch reconstruction rate (DAR), surgical approach, position of vascular anastomosis, and dental implantation rate. The independent-samples t-test and Fisher's exact test were used for analysis. P < 0.05 was considered statistically significant. RESULTS: In total, 12 males and 22 females were included in this study. All patients underwent midface reconstruction using the DCIA flap at the same institution. The median age of patients was 33 years (range: 16-68 years). The average BCR and DAR values in the VSP group were 59.4% ± 27.9% and 87.5% ± 18.9%, respectively, which were significantly higher compared with the non-VSP group (P = 0.049 and P = 0.004, respectively). The dental implantation rate in the VSP group (50.0%) was significantly higher compared with the non-VSP group (11.1%; P = 0.023). The intraoral approach for tumor ablation and vascular anastomosis was the most frequent choice in both groups. There was no significant difference between the two groups. All patients were satisfied with facial symmetry postoperatively. CONCLUSIONS: VSP could effectively augment the effect of midface reconstruction with the DCIA flap. Stronger bone contact in the buttress region and higher DAR provide more opportunity for dental implantation, which might be the best solution to improve masticatory function in patients with midface defects.

Facile Fabrication of Flexible Pressure Sensor with Programmable Lattice Structure.

Flexible pressure sensors have attracted intense attention because of their widespread applications in electronic skin, human-machine interfaces, and healthcare monitoring. Conductive porous structures are always utilized as active layers to improve the sensor sensitivities. However, flexible pressure sensors derived from traditional foaming techniques have limited structure designability. Besides, random pore distribution causes difference in structure and signal repeatability between different samples even in one batch, therefore limiting the batch production capabilities. Herein, we introduce a structure designable lattice structure pressure sensor (LPS) produced by bottom-up digital light processing (DLP) 3D printing technique, which is capable of efficiently producing 55 high fidelity lattice structure models in 30 min. The LPS shows high sensitivity (1.02 kPa-1) with superior linearity over a wide pressure range (0.7 Pa to 160 kPa). By adjusting the design parameters such as lattice type and layer thickness, the electrical sensitivities and mechanical properties of LPS can be accurately controlled. In addition, the LPS endures up to 60000 compression cycles (at 10 kPa) without any obvious electrical signal degradation. This benefits from the firm carbon nanotubes (CNTs) coating derived from high-energy ultrasonic probe and the subsequent thermal curing process of UV-heat dual-curing photocurable resin. For practical applications, the LPS is used for real time pulse monitoring, voice recognition and Morse code communication. Furthermore, the LPS is also integrated to make a flexible 4 × 4 sensor arrays for detecting spatial pressure distribution and a flexible insole for foot pressure monitoring.

Orbital floor symmetry after maxillectomy and orbital floor reconstruction with individual titanium mesh using computer-assisted navigation.

PURPOSE: The present study aimed to evaluate the symmetry of the orbital floor after maxillectomy and orbital floor reconstruction with individual titanium mesh using a computer-assisted navigation system. PATIENTS AND METHODS: Nineteen patients who underwent orbital floor reconstruction with individual titanium mesh were included in this study. Postoperative computed tomography scans recorded after three-dimensional (3D) reconstruction were used to evaluate the symmetry of the orbital floor, including orbital floor height, orbital floor eminence, globe projection, orbital volume, and surface deviation. RESULTS: The average orbital floor height of the reconstructed and the unaffected side was 37.7 ±â€¯2.3 and 37.8 ±â€¯2.7 mm, respectively (P = .47). The average orbital floor eminence of the reconstructed and the unaffected side was 40.1 ±â€¯5.5 and 39.6 ±â€¯5.3 mm, respectively (P = .17). The average globe projection of the reconstructed and the unaffected side was 15.5 ±â€¯3.2 and 15.3 ±â€¯3.0 mm, respectively (P = .27). The average orbital volume of the reconstructed and the unaffected side was 25.9 ±â€¯4.4 and 26.3 ±â€¯4.4 cm3, respectively (P = .29). Repeatability between the reconstructed and the unaffected side was 88.3% ± 2.6% at within 1 mm and 98.6% ± 0.9% at within 2 mm. The average of maximum deviation was 2.4 ±â€¯0.2 mm. CONCLUSION: Individual titanium mesh is one of the best techniques for orbital floor reconstruction, as it can be placed precisely and helps achieve desirable esthetic outcomes through virtual surgical planning and using a computer-assisted navigation system.

A new furan derivative from an endophytic Aspergillus tubingensis of Decaisnea insignis (Griff.) Hook.f. & Thomson.

A new furan derivative named 3-(5-oxo-2,5-dihydrofuran-3-yl) propanoic acid (1) was isolated for the first time. Its structure was elucidated by UV, IR, NMR, HR-ESI-MS and the single-crystal X-ray diffraction spectroscopic data. Meanwhile, the antifungal and antibacterial activities of compound 1 was tested, it exhibited potent antifungal activity against Fusarium graminearum with MIC value of 16 µg/mL and medium antibacterial activity against Streptococcus lactis with MIC value of 32 µg/mL.

Comparative Study on Temperature-Dependent CO2 Sorption Behaviors of Two Isostructural N-Oxide-Functionalized 3D Dynamic Microporous MOFs.

By functionalization of the achiral carboxylate-based pyridine-N ligand 2,2'-bipyridine-3,3'-dicarboxylate (H2bpda) with N-oxide groups, the axially chiral ligand 2,2'-bipyridine-3,3'-dicarboxylate 1,1'-dioxide (H2bpdado) has been obtained. On the basis of H2bpdado and auxiliary N-donor ligands, two isostructural 3D dynamic porous Cu(II) metal-organic frameworks (MOFs), {[Cu0.5(bpdado)0.5(L)0.5]·3H2O}n (L = 1,2-bis(4-pyridyl)ethane (bpa), trans-1,2-bis(4-pyridyl)ethene (bpe) for 1 and 2, respectively), have been synthesized, which contain N-oxide "open donor sites" (ODSs) and carboxyl sites on the pore surfaces. The modification of pyridine-N into the N-oxide group not only transforms the nonporous structure into a porous framework but also endows the N-oxide group with unique charge-separated plus electron-rich character, which may provide an enhanced affinity toward CO2 molecules. Interestingly, both 1 and 2 present reversible structural transformation upon dehydration and rehydration. The adsorption properties of 1 and 2 have been investigated by N2, H2, CH4, and CO2 gases, and they reveal evident adsorption for CO2 and CH4. Both MOFs have high CO2 uptake, CO2 sorption affinity, and sorption selectivities of CO2 over CH4 and N2. Remarkably, 1' and 2' exhibit intriguingly comparable temperature-dependent CO2 sorption behaviors that can probably be attributed to the difference in bpa and bpe. First, at 195 K, 1' and 2' exhibit stepwise adsorption and hysteretic desorption behavior for CO2, but in the second step, the isotherms of 2' display a starting pressure greater than that of 1'. Then, at 298 K, their CO2 isotherms all show nonclassical type I adsorption, while peculiarly, at 273 K, the CO2 isotherm of 1' still exhibits uncommon stepwise adsorption but that of 2' does not. Thus, these temperature-dependent CO2 sorption behaviors indicate that there exist different threshold temperatures and pressures of channel expansion for 1' and 2'.

Four 3D "brick-wall"-like metal-organic frameworks with a flexible ligand of (S,S,R,R)-1,2,3,4-cyclopentanetetracarboxylic acid: crystal structures, luminescent and magnetic properties.

To investigate the conformation of cyclopentanetetracarboxylic acid, four new "brick-wall"-like metal-organic frameworks have been synthesized from hydrothermal reactions with different metal salts, (S,S,R,R)-1,2,3,4-cyclopentanetetracarboxylic acid (H(4)cptc) and auxiliary N-donor ligands, namely, Cu(2)(S,S,R,R-cptc)(bpe)(H(2)O)(2)·2H(2)O (1), Co(2)(S,S,R,R-cptc)(bpe)(0.5)(H(2)O)(2)·2H(2)O (2), Cd(4)(S,S,R,R-cptc)(2)(bpa)(2)(H(2)O)(5)·2H(2)O (3) and Co(2)(S,S,R,R-cptc)(bpy)(0.5)(H(2)O)(2)·2(H(2)O) (4) (bpe = 4-(2-(pyridine-4-yl)vinyl)pyridine, bpa = 4-(2-(pyridine-4-yl)ethyl)pyridine, bpy = 4-(pyridine-4-yl)pyridine). The complexes were further characterized by single-crystal X-ray diffraction, power X-ray diffraction, FT-IR spectra, fluorescent measurements and variable-temperature magnetic susceptibility measurements. The results of the structural investigations show that 1 is a charming (3,3,4)-trinodal architecture, 3 is an interesting trinodal (3,4,5)-connected architecture, and 2 and 4 are isostructural, which are both (4,5)-connected networks. In addition, the magnetic measurements indicate that 2 and 4 show weak antiferromagnetic interactions, and the fluorescent measurement shows the strong solid-state fluorescent emission at room temperature for 3.