Graphene Incorporated Electrospun Nanofiber for Electrochemical Sensing and Biomedical Applications: A Critical Review.

The extraordinary material graphene arrived in the fields of engineering and science to instigate a material revolution in 2004. Graphene has promptly risen as the super star due to its outstanding properties. Graphene is an allotrope of carbon and is made up of sp2-bonded carbon atoms placed in a two-dimensional honeycomb lattice. Graphite consists of stacked layers of graphene. Due to the distinctive structural features as well as excellent physico-chemical and electrical conductivity, graphene allows remarkable improvement in the performance of electrospun nanofibers (NFs), which results in the enhancement of promising applications in NF-based sensor and biomedical technologies. Electrospinning is an easy, economical, and versatile technology depending on electrostatic repulsion between the surface charges to generate fibers from the extensive list of polymeric and ceramic materials with diameters down to a few nanometers. NFs have emerged as important and attractive platform with outstanding properties for biosensing and biomedical applications, because of their excellent functional features, that include high porosity, high surface area to volume ratio, high catalytic and charge transfer, much better electrical conductivity, controllable nanofiber mat configuration, biocompatibility, and bioresorbability. The inclusion of graphene nanomaterials (GNMs) into NFs is highly desirable. Pre-processing techniques and post-processing techniques to incorporate GNMs into electrospun polymer NFs are precisely discussed. The accomplishment and the utilization of NFs containing GNMs in the electrochemical biosensing pathway for the detection of a broad range biological analytes are discussed. Graphene oxide (GO) has great importance and potential in the biomedical field and can imitate the composition of the extracellular matrix. The oxygen-rich GO is hydrophilic in nature and easily disperses in water, and assists in cell growth, drug delivery, and antimicrobial properties of electrospun nanofiber matrices. NFs containing GO for tissue engineering, drug and gene delivery, wound healing applications, and medical equipment are discussed. NFs containing GO have importance in biomedical applications, which include engineered cardiac patches, instrument coatings, and triboelectric nanogenerators (TENGs) for motion sensing applications. This review deals with graphene-based nanomaterials (GNMs) such as GO incorporated electrospun polymeric NFs for biosensing and biomedical applications, that can bridge the gap between the laboratory facility and industry.

Advanced Waveguide Based LOC Biosensors: A Minireview.

This mini review features contemporary advances in mid-infrared (MIR) thin-film waveguide technology and on-chip photonics, promoting high-performance biosensing platforms. Supported by recent developments in MIR thin-film waveguides, it is expected that label-free assimilated MIR sensing platforms will soon supplement the current sensing technologies for biomedical diagnostics. The state-of-the-art shows that various types of waveguide material can be utilized for waveguide spectroscopic measurements in MIR. However, there are challenges to integrating these waveguide platforms with microfluidic/Lab-on-a-Chip (LOC) devices, due to poor light-material interactions. Graphene and its analogs have found many applications in microfluidic-based LOC devices, to address to this issue. Graphene-based materials possess a high conductivity, a large surface-to-volume ratio, a smaller and tunable bandgap, and allow easier sample loading; which is essential for acquiring precise electrochemical information. This work discusses advanced waveguide materials, their advantages, and disease diagnostics with MIR thin-film based waveguides. The incorporation of graphene into waveguides improves the light-graphene interaction, and photonic devices greatly benefit from graphene's strong field-controlled optical response.

Electrospun polyvinyl-alcohol nanofibers as oral fast-dissolving delivery system of caffeine and riboflavin.

Fast-dissolving drug delivery systems were prepared by electrospinning using polyvinyl alcohol (PVA) as the filament-forming polymer and drug carrier. Caffeine and riboflavin were used as the model drugs. Scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) and X-ray diffraction were applied to investigate the physicochemical properties of electrospun nanofibers. The SEM images showed that nanofibers prepared from electrospinning PVA/drug aqueous solutions possessed an ultrafine morphology with an average diameter in the range of 260-370 nm. Pharmacotechnical tests showed that PVA/caffeine and PVA/riboflavin nanofibrous mats had almost the same dissolution time (about 1.5 s) and wetting time (about 4.5 s). The release measurements indicated that drugs can be released in a burst manner (caffeine to an extent of 100% and riboflavin to an extent of 40% within 60 s) from the PVA nanofibrous matrices.

Oxidative stress-mediated cytotoxicity and apoptosis induction by TiO2 nanofibers in HeLa cells.

Titanium dioxide nanoparticles are increasingly being used in pharmaceutical and cosmetic products. The high aspect ratio of fibrous nanomaterials, such as carbon nanotubes and TiO(2) nanofibers (TiO(2)NFs), similar to the one used in this study makes them an attractive structural material and has attracted a lot of attention due to their possible negative health effects as suggested by their morphological similarities with asbestos. In the present study, therefore, toxicity of TiO(2)NFs was evaluated in human cervical adenocarcinoma HeLa cells. The TEM and XRD analyses showed that TiO(2)NFs used in this study are pure with uniform diameter of around 200 nm, and their length to width aspect ratio ranged between 5 and 15. Exposure of HeLa cells to TiO(2)NFs induced significant cytotoxicity even at doses as low as 2 µg/ml. The intracellular uptake of TiO(2)NFs in cells was shown by Alizarin Red S (ARS) labeled nanofibers. The mechanism of toxicity is mainly due to the induction of cellular oxidative stress, as revealed by elevated ROS levels, reduced antioxidant levels, and increased lipid peroxidation leading to apoptosis. The cell cycle analysis indicated G(2)/M cell cycle arrest in the cells exposed to TiO(2)NF. TiO(2)NFs treatment to HeLa cells resulted in increased expression of proapoptotic proteins Bax with an increase in cytosolic Cytochrome-C and inhibition of anti-apoptotic protein Bcl-2. Our results revealed the potential mechanism of cellular effects of TiO(2)NFs.

Preparing photochromic nanofibers and animal cells using a photochromic compound of 1',3',3'-trimethyl-6-nitrospiro (2H-1-benzopyran-2,2'-indoline).

In this work, the photochromic compound 1',3',3'-trimethyl-6-nitrospiro (2H-1-benzopyran-2,2'-indoline) (NOSP) was synthesized by a two step process. The photochromic properties of NOSP were investigated by ultraviolet-visible (UV-Vis) spectrophotometry. The results showed that NOSP was very sensitive to UV irradiation with absorption peaks at about 336 nm and 567 nm. Our hypothesis was that both photochromic nanofibers and photochromic living animal cells could be obtained by combining them with NOSP. To test the hypothesis, photochromic nanofibers were fabricated by electrospinning from various mixed solutions of NOSP and polymers (including a synthetic polymer of poly(methyl methacrylate) and a natural polymer of gelatin); NOSP/ethanol solution was dissolved in culture medium to stain pig iliac endothelial cells (PIEC) and endow them with photochromic capability. Polymer nanofibers from electrospinning were characterized by water contact angle measurements, ultraviolet-visible (UV-Vis) spectrophotometry and fluorescence microscopy. Morphology of photochromic PIEC was observed by fluorescence microscopy after being irradiated. It was shown that nanofibers from electrospun polymers and NOSP-treated PIEC had photochromic properties. The bio-toxicity of the photochromic compound was also evaluated and it was shown that ~50% of PIEC remained viable for at least 20 min. The photochromic compound NOSP could be a potentially powerful tool for development of multi-functional nanofibers and biological applications.

Titanium Dioxide Nanofibers and Microparticles Containing Nickel Nanoparticles.

The present study reports on the introduction of various nanocatalysts containing nickel (Ni) nanoparticles (NPs) embedded within TiO2 nanofibers and TiO2 microparticles. Typically, a sol-gel consisting of titanium isopropoxide and Ni NPs was prepared to produce TiO2 nanofibers by the electrospinning process. Similarly, TiO2 microparticles containing Ni were prepared using a sol-gel syntheses process. The resultant structures were studied by SEM analyses, which confirmed well-obtained nanofibers and microparticles. Further, the XRD results demonstrated the crystalline feature of both TiO2 and Ni in the obtained composites. Internal morphology of prepared nanofibers and microparticles containing Ni NPs was characterized by TEM, which demonstrated characteristic structures with good dispersion of Ni NPs. In addition, the prepared structures were studied as a model for hydrogen production applications. The catalytic activity of the prepared materials was studied by in situ hydrolysis of NaBH4, which indicated that the nanofibers containing Ni NPs can lead to produce higher amounts of hydrogen when compared to other microparticles, also reported in this paper. Overall, these results confirm the potential use of these materials in hydrogen production systems.

Fabrication of Mineralized Collagen from Bovine Waste Materials by Hydrothermal Method as Promised Biomaterials.

In the present study, we aimed to produce mineralized-collagen by hydrothermal process. A simple method not depending on additional foreign chemicals has been employed to isolate the mineralized-collagen fibers from bovine waste. The process of extraction involves the use of hydrothermal method from available bovine bones. The structural and morphological properties of the collagen fibers were characterized by using scanning electron microscopy and transmission electron microscopy. These results indicated well received collagen fibers, having a diameter less than 1 µm and with established mineral content in the individual fibers. The X-ray diffraction showed the crystalline feature of the obtained nano-compounds. The thermo gravimetric analysis was used to differentiate between the collagen and mineral parts of obtained product. Overall, the results generously indicated production of well received collagen fibers from bovine bones.

Electrospun titanium dioxide nanofibers containing hydroxyapatite and silver nanoparticles as future implant materials.

In this study, a good combination consisting of electrospun titanium dioxide (TiO(2)) nanofibers incorporated with high purity hydroxyapatite (HAp) nanoparticles (NPs) and antimicrobial silver NPs is introduced for hard tissue engineering applications. The synthesized nanofibers were characterized by various state of art techniques like; SEM, XRD, TEM, TEM EDS and XPS analyses. SEM results confirmed well oriented nanofibers and good dispersion of HAp and silver NPs, respectively. XRD results demonstrated well crystalline feature of three components used for electrospinning. Silver NPs were having a diameter in range of 5-8 nm indicated by TEM analysis. Moreover, TEM EDS analysis demonstrated the presence of each component with good dispersion over TiO(2) nanofiber. The surface analyses of nanofibers were investigated by XPS which indicated the presence of silver NPs on the surfaces of nanofibers. The obtained nanofibers were checked for antimicrobial activity by using two model organisms E. coli and S. aureus. Subsequently, antimicrobial tests have indicated that the prepared nanofibers do possess high bactericidal effect. Accordingly, these results strongly recommend the use of obtained nanofiber mats as future implant materials.

Novel self-assembled amphiphilic poly(epsilon-caprolactone)-grafted-poly(vinyl alcohol) nanoparticles: hydrophobic and hydrophilic drugs carrier nanoparticles.

In the present study, we have aimed to produce nanoparticles (NPs) possessing the capability of carrying both of the hydrophobic and hydrophilic drugs and reveal significant release for both drug types. Poly(epsilon-caprolactone) (PCL) grafted poly(vinyl alcohol) (PVA) copolymer (PCL-g-PVA) has been prepared and shaped in nano-particulate form to be adequate for carrying the drugs. Stannous octoate (Sn(II)Oct(2)) was used to catalyze PVA and epsilon-caprolactone monomer to chemically bond. Moreover, this catalyst enhanced side chain polymerization reaction for the utilized epsilon-caprolactone monomer to form poly(epsilon-caprolactone) (PCL). The formed PCL was attached as branches with PVA backbone. (1)H NMR has confirmed formation of PCL and grafting of PVA by this new polymer. Moreover, the vibration modes in the functional groups of PCL-g-PVA have been detected by FT-IR. The thermal alteration in the grafted polymer was checked by TGA analysis. The successfully synthesized grafted copolymer was able to self-aggregate into NPs by direct dialysis method. The size, morphology and charges associated with the obtained NPs were analyzed by DLS, TEM and ELS, respectively. PCL-g-PVA NPs were investigated as drug carrier models for hydrophobic and hydrophilic anti cancer drugs; paclitaxel and doxorubicin. In vitro drug release experiments were conducted; the loaded NPs reveal continuous and sustained release form for both drugs, up to 20 and 15 days for paclitaxel and doxorubicin, respectively. However, in a case of using pure drugs only, both drugs completely released within 1-2 h. The overall obtained results strongly recommend the use these novel NPs in future drug delivery systems.

Surface plasmon resonances, optical properties, and electrical conductivity thermal hystersis of silver nanofibers produced by the electrospinning technique.

In the present study, silver metal nanofibers have been successfully prepared by using the electrospinning technique. Silver nanofibers have been produced by electrospinning a sol-gel consisting of poly(vinyl alcohol) and silver nitrate. The dried nanofiber mats have been calcined at 850 degrees C in an argon atmosphere. The produced nanofibers do have distinct plasmon resonance compared with the reported silver nanoparticles. Contrary to the introduced shapes of silver nanoparticles, the nanofibers have a blue-shifted plasmon resonance at 330 nm. Moreover, the optical properties study indicated that the synthesized nanofibers have two band gap energies of 0.75 and 2.34 eV. An investigation of the electrical conductivity behavior of the obtained nanofibers shows thermal hystersis. These privileged physical features greatly widen the applications of the prepared nanofibers in various fields.