Rethinking of TEER measurement reporting for epithelial cells grown on permeable inserts.

Transepithelial electrical resistance (TEER) measures electrical resistance across epithelial tissue barriers involving confluent layer(s) of cells. TEER values act as a prerequisite for determining the barrier integrity of cells, which play a key role in evaluating the transport of drugs, materials or chemicals of interest across an epithelial barrier. The measurements can be performed non-invasively by measuring ohmic resistance across a defined area. Thus, the TEER values are reported in Ω·cm2. In vitro epithelial models are typically assembled on semi-permeable inserts providing two-chamber compartments, and the majority of the studies use inserts with polyethylene terephthalate (PET) membranes. Recently, new inserts with different membrane types and properties have been introduced. However, the TEER values presented so far did not allow a direct comparison. This study presents the characterization of selected epithelial tissues, i.e., lung, retina, and intestine, grown on an ultra-thin ceramic microporous permeable insert (SiMPLI) and PET membranes with different properties, i.e., thickness, material, and pore numbers. We verified the epithelial cell growth on both inserts via phase-contrast and confocal laser scanning microscope imaging. Barrier characteristics were assessed by TEER measurements and also by evaluating the permeability of fluorescein isothiocyanate through cell layers. The findings indicated that background TEER value calculations and the available surface area for cell growth must be thoroughly assessed when new inserts are introduced, as the values cannot be directly compared without re-calculations. Finally, we proposed electrical circuit models highlighting the contributors to TEER recordings on PET and SiMPLI insert membranes. This study paves the way for making the ohmic-based evaluation of epithelial tissues' permeability independent of the material and geometry of the insert membrane used for cell growth.

A 3D multi-cellular tissue model of the human omentum to study the formation of ovarian cancer metastasis.

Reliable and predictive experimental models are urgently needed to study metastatic mechanisms of ovarian cancer cells in the omentum. Although models for ovarian cancer cell adhesion and invasion were previously investigated, the lack of certain omental cell types, which influence the metastatic behavior of cancer cells, limits the application of these tissue models. Here, we describe a 3D multi-cellular human omentum tissue model, which considers the spatial arrangement of five omental cell types. Reproducible tissue models were fabricated combining permeable cell culture inserts and bioprinting technology to mimic metastatic processes of immortalized and patient-derived ovarian cancer cells. The implementation of an endothelial barrier further allowed studying the interaction between cancer and endothelial cells during hematogenous dissemination and the impact of chemotherapeutic drugs. This proof-of-concept study may serve as a platform for patient-specific investigations in personalized oncology in the future.

Inter-laboratory variability of A549 epithelial cells grown under submerged and air-liquid interface conditions.

In vitro cell models offer a unique opportunity for conducting toxicology research, and the human lung adenocarcinoma cell line A549 is commonly used for toxicology testing strategies. It is essential to determine whether the response of these cells grown in different laboratories is consistent. In this study, A549 cells were grown under both submerged and air-liquid interface (ALI) conditions following an identical cell seeding protocol in two independent laboratories. The cells were switched to the ALI after four days of submerged growth, and their behaviour was compared to submerged conditions. The membrane integrity, cell viability, morphology, and (pro-)inflammatory response upon positive control stimuli were assessed at days 3, 5, and 7 under submerged conditions and at days 5, 7, and 10 at the ALI. Due to the high variability of the results between the two laboratories, the experiment was subsequently repeated using identical reagents at one specific time point and condition (day 5 at the ALI). Despite some variability, the results were more comparable, proving that the original protocol necessitated improvements. In conclusion, the use of detailed protocols and consumables from the same providers, special training of personnel for cell handling, and endpoint analysis are critical to obtain reproducible results across independent laboratories.

Hyaluronan-Conjugated Carbon Quantum Dots for Bioimaging Use.

This work demonstrates the application of hyaluronan-conjugated nitrogen-doped carbon quantum dots (HA-nCQDs) for bioimaging of tumor cells and illustrates their potential use as carriers in targeted drug delivery. Quantum dots are challenging to deliver with specificity, which hinders their application. To facilitate targeted internalization by cancer cells, hyaluronic acid, a natural ligand of CD44 receptors, was covalently grafted on nCQDs. The HA-nCQD conjugate was synthesized by carbodiimide coupling of the amine moieties on nCQDs and the carboxylic acids on HA chains. Conjugated HA-nCQD retained sufficient fluorescence, although with 30% lower quantum efficiency than the original nCQDs. Confocal microscopy showed enhanced internalization of HA-nCQDs, facilitated by CD44 receptors. To demonstrate the specificity of HA-nCQDs toward human tumor cells, patient-derived breast cancer tissue with high-CD44 expression was implanted in adult mice. The tumors were allowed to grow up to 200-250 mm3 prior to the injection of HA-nCQDs. With either local or systemic injection, we achieved a high level of tumor specificity judged by a strong signal-to-noise ratio between the tumor and the surrounding tissue in vivo. Overall, the results show that HA-nCQDs can be used for imaging of CD44-specific tumors in preclinical models of human cancer and potentially used as carriers for targeted drug delivery into CD44-rich cells.

An Inflamed Human Alveolar Model for Testing the Efficiency of Anti-inflammatory Drugs in vitro.

A large number of prevalent lung diseases is associated with tissue inflammation. Clinically, corticosteroid therapies are applied systemically or via inhalation for the treatment of lung inflammation, and a number of novel therapies are being developed that require preclinical testing. In alveoli, macrophages and dendritic cells play a key role in initiating and diminishing pro-inflammatory reactions and, in particular, macrophage plasticity (M1 and M2 phenotypes shifts) has been reported to play a significant role in these reactions. Thus far, no studies with in vitro lung epithelial models have tested the comparison between systemic and direct pulmonary drug delivery. Therefore, the aim of this study was to develop an inflamed human alveolar epithelium model and to test the resolution of LPS-induced inflammation in vitro with a corticosteroid, methylprednisolone (MP). A specific focus of the study was the macrophage phenotype shifts in response to these stimuli. First, human monocyte-derived macrophages were examined for phenotype shifts upon exposure to lipopolysaccharide (LPS), followed by treatment with MP. A multicellular human alveolar model, composed of macrophages, dendritic cells, and epithelial cells, was then employed for the development of inflamed models. The models were used to test the anti-inflammatory potency of MP by monitoring the secretion of pro-inflammatory mediators (interleukin [IL]-8, tumor necrosis factor-α [TNF-α], and IL-1ß) through four different approaches, mimicking clinical scenarios of inflammation and treatment. In macrophage monocultures, LPS stimulation shifted the phenotype towards M1, as demonstrated by increased release of IL-8 and TNF-α and altered expression of phenotype-associated surface markers (CD86, CD206). MP treatment of inflamed macrophages reversed the phenotype towards M2. In multicellular models, increased pro-inflammatory reactions after LPS exposure were observed, as demonstrated by protein secretion and gene expression measurements. In all scenarios, among the tested mediators the most pronounced anti-inflammatory effect of MP was observed for IL-8. Our findings demonstrate that our inflamed multicellular human lung model is a promising tool for the evaluation of anti-inflammatory potency of drug candidates in vitro. With the presented setup, our model allows a meaningful comparison of the systemic vs. inhalation administration routes for the evaluation of the efficacy of a drug in vitro.

An In Vitro Lung System to Assess the Proinflammatory Hazard of Carbon Nanotube Aerosols.

In vitro three-dimensional (3D) lung cell models have been thoroughly investigated in recent years and provide a reliable tool to assess the hazard associated with nanomaterials (NMs) released into the air. In this study, a 3D lung co-culture model was optimized to assess the hazard potential of multiwalled carbon nanotubes (MWCNTs), which is known to provoke inflammation and fibrosis, critical adverse outcomes linked to acute and prolonged NM exposure. The lung co-cultures were exposed to MWCNTs at the air-liquid interface (ALI) using the VITROCELL® Cloud system while considering realistic occupational exposure doses. The co-culture model was composed of three human cell lines: alveolar epithelial cells (A549), fibroblasts (MRC-5), and macrophages (differentiated THP-1). The model was exposed to two types of MWCNTs (Mitsui-7 and Nanocyl) at different concentrations (2-10 µg/cm2) to assess the proinflammatory as well as the profibrotic responses after acute (24 h, one exposure) and prolonged (96 h, repeated exposures) exposure cycles. The results showed that acute or prolonged exposure to different concentrations of the tested MWCNTs did not induce cytotoxicity or apparent profibrotic response; however, suggested the onset of proinflammatory response.

Impact of airborne particulate matter on skin: a systematic review from epidemiology to in vitro studies.

BACKGROUND: Air pollution is killing close to 5 million people a year, and harming billions more. Air pollution levels remain extremely high in many parts of the world, and air pollution-associated premature deaths have been reported for urbanized areas, particularly linked to the presence of airborne nano-sized and ultrafine particles. MAIN TEXT: To date, most of the research studies did focus on the adverse effects of air pollution on the human cardiovascular and respiratory systems. Although the skin is in direct contact with air pollutants, their damaging effects on the skin are still under investigation. Epidemiological data suggested a correlation between exposure to air pollutants and aggravation of symptoms of chronic immunological skin diseases. In this study, a systematic literature review was conducted to understand the current knowledge on the effects of airborne particulate matter on human skin. It aims at providing a deeper understanding of the interactions between air pollutants and skin to further assess their potential risks for human health. CONCLUSION: Particulate matter was shown to induce a skin barrier dysfunction and provoke the formation of reactive oxygen species through direct and indirect mechanisms, leading to oxidative stress and induced activation of the inflammatory cascade in human skin. Moreover, a positive correlation was reported between extrinsic aging and atopic eczema relative risk with increasing particulate matter exposure.

Bioinspired Thermosensitive Hydrogel as a Vitreous Substitute: Synthesis, Properties, and Progress of Animal Studies.

In many vitreal diseases, the surgeon removes the natural vitreous and replaces it with silicone oils, gases, or balanced salt solutions to fill the eyeball and hold the retina in position. However, these materials are often associated with complications and have properties that differ from natural vitreous. Herein, we report an extension of our previous work on the synthesis of a biomimetic hydrogel that is composed of thiolated gellan as an analogue of type II collagen and poly(methacrylamide-co-methacrylate-co-bis(methacryloyl)cystamine), a polyelectrolyte, as an analogue of hyaluronic acid. This thermosensitive hydrogel can be injected into the eye as a viscous solution at 45 °C. It then forms a physical gel in situ when it reaches body temperature, and later forms disulfide covalent crosslinks. In this article, we evaluated two different formulations of the biomimetic hydrogels for their physical, mechanical, and optical properties, and we determined their biocompatibility with several cell lines. Finally, we report on the progress of the four-month preclinical evaluation of our bio-inspired vitreous substitute in comparison to silicone oil or a balanced salt solution. We assessed the eyes with a slit-lamp examination, intraocular pressure measurements, electroretinography, and optical coherence tomography. Preliminary results are very encouraging for the continuing evaluation of our bio-inspired hydrogel in clinical trials.

Investigating the Effects of Stove Emissions on Ocular and Cancer Cells.

More than a third of the world's population relies on solid fuels for cooking and heating, with major health consequences. Although solid fuel combustion emissions are known to increase the prevalence of illnesses such as chronic obstructive pulmonary disease and lung cancer, however, their effect on the eyes is underexplored. This study assesses the acute toxicity of solid fuel combustion emissions on healthy ocular cells and a cancer cell line. Three healthy ocular cell lines (corneal, lens, and retinal epithelial cells) and a cancer cell line (Chinese hamster ovary cells) were exposed to liquid and gas phase emissions from applewood and coal combustion. Following the exposure, real-time cell attachment behavior was monitored for at least 120 hours with electrical cell impedance spectroscopy. The viability of the cells, amount of apoptotic cells, and generation of reactive oxygen species (ROS) were quantified with MTT, ApoTox-Glo, and ROS-Glo H2O2 assays, respectively. The results showed that coal emissions compromised the viability of ocular cells more than applewood emissions. Interestingly, the cancer cells, although their viability was not compromised, generated 1.7 to 2.7 times more ROS than healthy cells. This acute exposure study provides compelling proof that biomass combustion emissions compromise the viability of ocular cells and increase ROS generation. The increased ROS generation was fatal for ocular cells, but it promoted the growth of cancer cells.

Bioinspired Fibrillary Hydrogel with Controlled Swelling Behavior: Applicability as an Artificial Vitreous.

The vitreous humor of the eye is mainly composed of fibrillary collagen and semiflexible hyaluronic acid (HA). To mimic this macromolecular composition of the vitreous, we previously developed an injectable two-component hydrogel composed of a fibrillary gellan and a semiflexible polyelectrolyte, poly[methacrylamide-co-(methacrylic acid)], both endowed with thiol cross-linkers. We optimized the hydrogel formulations for optical, physical, mechanical, and transport properties approximating those of the vitreous. Here, we studied 11 hydrogel formulations with varying concentrations of each component, and, as expected, we found that they all swelled in physiological solution. The two formulations that most closely matched the vitreous properties were investigated further. Judged against nonsurgical control and silicone oil, a clinically accepted vitreous replacement, both hydrogel formulations were biocompatible in rabbits for 30 days. Both hydrogels maintained optical clarity, physiological intraocular pressure, and intact retinal layers that displayed normal electroretinography. The swelling behavior of the gel led us to postulate that the native vitreous may also exhibit controlled swelling, where ionic HA's swelling capacity is restricted by fibrillary collagen. In conclusion, the two hydrogels merit further in vivo evaluation as an artificial vitreous for an extended duration and additionally in mini-pigs for their similarity to human eyes in size.

Hyaluronate coating enhances the delivery and biocompatibility of gold nanoparticles.

For targeted delivery with nanoparticles (NPs) as drug carriers, it is imperative that the NPs are internalized into the targeted cell. Surface properties of NPs influence their interactions with cells. We examined the responses of retinal pigment epithelial cells, NIH 3T3 fibroblast cells, and Chinese hamster ovary cells to gold nanoparticles (Au NPs) in their nascent form as well as coated with end-thiolated hyaluronate (HS-HA). The grafting density of HS-HA on Au NPs was calculated based on total organic carbon measurements and thermal gravimetric analysis. We imaged the intracellular NPs by 3D confocal microscopy. We quantified viability and generation of reactive oxygen species (ROS) of the cells to Au NPs and monitored cell-surface attachment via electrical cell-substrate impedance sensing. The results confirmed that receptors on cell surfaces, for HA, are critical in internalizing HS-HA-Au NPs, and HA may mitigate ROS pathways known to lead to cell death. The 50- and 100-nm HS-HA-Au NPs were able to enter the cells; however, their nascent forms could not. This study shows that the delivery of larger Au NPs is enhanced with HS-HA coating and illustrates the potential of HA-coated NPs as a drug delivery agent for inflamed, proliferating, and cancer cells that express CD44 receptors.

Synthesis and Characterization of Injectable Sulfonate-Containing Hydrogels.

Sulfonate-containing hydrogels are of particular interest because of their tunable mechanical and swelling properties, as well as their biological effects. Polysulfonate copolymers were synthesized by reacting 2-acrylamido-2-methylpropanesulfonic acid (AMPS), acrylamide (AM), and acrylic acid (AA). We found that the incorporation rate of sulfonate-containing monomer and the molecular weight of the copolymer were significantly enhanced by increasing the ionic strength of the solution. We introduced thiol groups by modifying the pendant carboxylates or copolymerizing along with a disulfide-containing monomer. The thiol-containing copolymers were reacted with a 4-arm acrylamide-terminated poly(ethylene glycol) via a thiol-ene click reaction, which was mediated by a photoinitiator, a redox initiator, or a base-catalyzed Michael-Addition. We were able to tailor the storage modulus (33-1800 Pa) and swelling capacity (1-91 wt %) of the hydrogel by varying the concentration of the copolymers. We determined that the injectable sulfonate-containing hydrogels were biocompatible up to 20 mg/mL, as observed by an electric cell-substrate impedance sensing (ECIS) technique, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay using three different cell lines: human retinal pigment epithelial cells (ARPE-19), fibroblasts (NIH 3T3), and Chinese hamster ovary cells (CHO).

Biocompatibility of gold nanoparticles in retinal pigment epithelial cell line.

Gold nanoparticles (Au NPs) have been tested as targeted delivery agents because of their high chemical stability and surface plasmon properties. Here, we investigated the biocompatibility of Au spheres (5-, 10-, 20-, 30-, 50-. and 100-nm), cubes (50-nm), and rods (10×90nm) on a retinal pigment epithelial (ARPE-19) cell line. The lethal dose for killing 50% of the cells (LD50) was evaluated using an MTT (3-[4, 5 dimethyl-thiazoly-2-yl] 2-5 diphenyl tetrazolium bromide) assay. At and above LD50, based on mass concentrations, the confluent cell layer began to detach, as shown by real-time measurements of electric impedance. We found that the biocompatibility of spheres improved with increasing nanoparticle size. The Au rods were less biocompatible than 10-nm spheres. Confocal microscopy showed that cubic (50-nm) and spherical NPs (50- and 100-nm) neither had cytotoxic effects nor entered cells. Lethal doses for internalized spherical NPs, which were toxic, were recalculated based on surface area (LD50,A) concentrations. Indeed, when biocompatibility was expressed as the surface area concentration of NPs, the curve was independent of size. The LD50,A of Au nanospheres was 23cm2/ml. Our findings demonstrate that the sole modulation of the surface area would make it possible to use Au NPs for therapeutic purposes.