Effects of different abutment connection designs on the stress distribution around five different implants: a 3-dimensional finite element analysis.

The stability of the bone-implant interface is required for the long-term favorable clinical outcome of implant-supported prosthetic rehabilitation. The implant failures that occur after the functional loading are mainly related to biomechanical factors. Micro movements and vibrations due to occlusal forces can lead to mechanical complications such as loosening of the screw and fractures of the abutment or implants. The aim of this study was to investigate the strain distributions in the connection areas of different implant-abutment connection systems under similar loading conditions. Five different implant-abutment connection designs from 5 different manufacturers were evaluated in this study. The investigation was performed with software using the finite element method. The geometrical modeling of the implant systems was done with CATIA virtual design software. The MSC NASTRAN solver and PATRAN postprocessing program were used to perform the linear static solution. According to the analysis, the implant-abutment connection system with external hexagonal connection showed the highest strain values, and the internal hexagonal implant-abutment connection system showed the lowest strain values. Conical + internal hexagonal and screw-in implant abutment connection interface is more successful than other systems in cases with increased vertical dimension, particularly in the posterior region.

Manufacturing implant supported auricular prostheses by rapid prototyping techniques.

Maxillofacial prostheses are usually fabricated on the models obtained following the impression procedures. Disadvantages of conventional impression techniques used in production of facial prosthesis are deformation of soft tissues caused by impression material and disturbance of the patient due to. Additionally production of prosthesis by conventional methods takes longer time. Recently, rapid prototyping techniques have been developed for extraoral prosthesis in order to reduce these disadvantages of conventional methods. Rapid prototyping technique has the potential to simplify the procedure and decrease the laboratory work required. It eliminates the need for measurement impression procedures and preparation of wax model to be performed by prosthodontists themselves In the near future this technology will become a standard for fabricating maxillofacial prostheses.