Tri-coordinated zinc alkyl complexes with N

A series of tri-coordinated zinc alkyl complexes with the general molecular formula [κ2NE-{NHIRP(Ph)(E)N-Dipp}ZnEt] [R = Dipp (2,6-diisopropylphenyl), E = S (3a), Se (3b) and R = tBu (tert-butyl), E = S (4a), Se (4b)] bearing imino-phosphanamidinate chalcogenide ligands were prepared in good yields from the reaction between the protic imino-phosphanamidinate chalcogenide ligand [NHIRP(Ph)(E)NH-Dipp] [R = Dipp, E = S (1a), Se (1b) and R = tBu, E = S (2a), Se (2b)] and diethylzinc at room temperature. The molecular structures of all the zinc complexes were established by single-crystal X-ray diffraction analysis. In the solid state, all complexes exhibited a distorted trigonal planar geometry around the zinc ion. Metal-chalcogenide (Zn-S/Se) interactions were observed in the coordination sphere. These zinc alkyl complexes were employed as pre-catalysts in the hydroboration reaction of nitriles and esters to obtain the corresponding N,N-diborylamines and boronate esters, respectively, under ambient conditions. A wide substrate scope of nitriles and esters is presented.

Unprecedented ROP of quinazolinones to polyacylamidines using a cesium catalyst.

Unprecedented ring-opening polymerization of quinazolinones to produce novel polyacylamidines, led by a unique cooperation between a cesium metal center and imino-phosphanamidinate ligand, was developed. Morphological studies revealed the formation of a unique macromolecular assembly producing nanofibers in the absence of a templating agent with excellent control of molecular weights and polydispersity index.

Hydrosilylation of nitriles and tertiary amides using a zinc precursor.

We report a competent and selective hydrosilylation of nitriles and tertiary amides catalyzed by the readily available zinc bis(hexamethyldisilazide) under solvent-free and mild conditions, making it a sustainable and desirable alternative to existing methods. Both protocols afforded high conversion, superior selectivity, and a broad substrate scope, from electron-withdrawing to electron-donating and heterocyclic substitutions.

Role of Bis(phosphinimino)methanides as Universal Ligands in the Coordination Sphere of Metals across the Periodic Table.

The coordination chemistry of bis(phosphinimino)methanide ligands is widespread and accompanies a large number of metal ions in the periodic table ranging from lithium to neptunium. This unique class of ligand systems show copious coordination chemistry with the main-group, transition, rare-earth, and actinide metals and are considered to be among the most attractive ligand systems to researchers. The bis(phosphinimino)methanide metal complexes offer an extensive range of applications in various fields and have been demonstrated as one of the universal ligand systems to stabilize the metal ions in not only their usual but also their unusual oxidation states. The main-group and transition metal chemistry using bis(phosphinimino)methanides as ligands was last updated almost a decade ago. In this review, we provide a comprehensive overview of various state-of-the-art bis(phosphinimino)methanide-supported metal complexes by dealing with their synthesis, characterization, reactivity, and catalytic studies which were not included in the last critical reviews.

A TiO2 nanorod and perylene diimide based inorganic/organic nanoheterostructure photoanode for photoelectrochemical urea oxidation.

Visible light-driven photoelectrochemical (PEC) urea oxidation using inorganic/organic nano-heterostructure (NH) photoanodes is an attractive method for hydrogen (H2) production. In this article, inorganic/organic NHs (TiO2/PDIEH) consisting of a N,N-bis(2-ethylhexyl)perylene-3,4,9,10-tetracarboxylic diimide (PDIEH) thin layer over TiO2 nanorods (NRs) were fabricated for the PEC urea oxidation reaction (UOR). In these NHs, a PDIEH layer was anchored on TiO2 NR arrays using the spin-coating technique, which is beneficial for the uniform deposition of PDIEH on TiO2 NRs. Uniform deposition facilitated adequate interface contact between PDIEH and TiO2 NRs. TiO2/PDIEH NHs achieved a high current density of 1.1 mA cm-2 at 1.96 VRHE compared to TiO2 NRs. TiO2/PDIEH offers long-term stability under light illumination with 90.21% faradaic efficiency. TiO2/PDIEH exhibits a solar-to-hydrogen efficiency of 0.52%. This outcome opens up new opportunities for inorganic/organic NHs for high-performance PEC urea oxidation.

Highly efficient and well-controlled ROP and copolymerization of cyclic esters using a cesium complex.

A cesium imino-phosphanamidinate, [{NHIDippP(Ph)NDipp}Cs], enabling efficient ring-opening (co)polymerization of rac-LA and ε-CL is disclosed. Owing to the highly controlled polymerization, precise di-block copolymers (PLA-b-PCL) with different block lengths can be produced by a simple one-pot reaction. NMR, GPC, DSC and microscopic analyses confirm the production of di-block copolymers with crystalline properties.

Photocatalytic H2 O2 Production by Thiophene-Coupled Benzotriazole and Anthraquinone-Based D-A-Type Polymer Nanoparticles.

Herein, the photocatalytic generation of an important solar fuel-H2 O2 -by a thiophene-coupled anthraquinone (AQ) and benzotriazole-based donor (D)-acceptor (A) polymer (PAQBTz) nanoparticles is systematically reported. The visible-light active and redox-active D-A type polymer is synthesized employing the Stille coupling polycondensation, and the nanoparticles are obtained by dispersing the PAQBTz polymer and polyvinylpyrrolidone solution, prepared in tetrahydrofuran to water. The polymer nanoparticles (PNPs) produce 1.61 and 1.36 mM mg-1 hydrogen peroxide (H2 O2 ) in the acidic and neutral media, respectively, under AM1.5G simulated sunlight irradiation (λ > 420 nm) with ≈2% modified Solar to Chemical Conversion (SCC) efficiency after 1 h of visible light illumination in acidic condition. The results of the various experiments lay bare the different aspects governing H2 O2 production and indicate the H2 O2 synthesis through the superoxide anion-mediated and anthraquinone-mediated routes.

Correction: NHC-Zn alkyl catalyzed cross-dehydrocoupling of amines and silanes.

Correction for 'NHC-Zn alkyl catalyzed cross-dehydrocoupling of amines and silanes' by Adimulam Harinath et al., Org. Biomol. Chem., 2023, https://doi.org/10.1039/d3ob00453h.

NHC-Zn alkyl catalyzed cross-dehydrocoupling of amines and silanes.

An N-heterocyclic carbene-zinc alkyl complex [ImDippZn(CH2CH3)2] (Im = imidazol-2-ylidene and Dipp = 2,6-diisopropylphenyl) acts as a catalyst in the cross-dehydrogenative coupling (CDC) of a wide range of primary and secondary amines and hydrosilanes to yield a substantial quantity of the corresponding aminosilanes with good chemoselectivity at room temperature. A broad substrate scope was observed during the zinc-catalyzed CDC reaction. Two zinc complexes, [{ImMesZn(µ-NHPh)(NHPh)}2] (Mes = mesityl) (3) and [{ImDippZn(CH2CH3)(µ-H)}2] (4), were isolated and structurally characterized as intermediates through controlled reactions to ascertain the CDC mechanism.

N

The synthesis, characterization, and catalytic application of six aluminum alkyl complexes supported by various imino-phosphanamidinate chalcogenide ligands are described. Six different unsymmetrical imino-phosphanamidinate chalcogenide ligands [NHIRP(Ph)(E)NH-Dipp] [R = 2,6-diisopropylphenyl (Dipp), E = S (2a-H), Se (2b-H); R = mesityl (Mes), E = S (3a-H), Se (3b-H); R = tert-butyl (tBu), E = S (4a-H), Se (4b-H)] were prepared by the oxidation of respective imino-phosphanamide ligands (1a, 1b and 1c) with elemental chalcogen atoms (S and Se). The aluminum complexes with imino-phosphanamidinate chalcogenide ligands with the general formulae [κ2NN-{NHIRP(Ph)(E)N-Dipp}AlMe2] [R = Dipp, E = S (5a), Se (5b); R = Mes, E = S (6a), Se (6b)] or [κ2NE-{NHIRP(Ph)(E)N-Dipp}AlMe2] [R = tBu, E = S (7a), Se (7b)] were synthesized in good yields from the reaction of the suitable protic ligands (2a,b-H-4a,b-H) and trimethylaluminum in a 1 : 1 molar ratio in toluene at room temperature. All the protic ligands and aluminum complexes were well characterized by multi-nuclear NMR spectroscopy, and the solid-state structures of 2a,b-H-4a,b-H, 5a,b-6a,b and 7b are established by single crystal X-ray diffraction analysis. The aluminum complexes 5a,b-7a,b were tested as catalysts for the hydroboration of nitriles, alkynes, and alkenes under mild conditions. The catalytic hydroboration reactions of nitriles, alkynes, and alkenes were accomplished with complex 5b at a mild temperature under solvent-free conditions to afford a high yield of the corresponding N,N-diborylamines, vinylboranes and alkyl boronate esters, respectively.

Pt nanoparticles coupled with perylene-based small molecule deposited on Ti3+ self-doped TiO2 nanorods-An inorganic/organic type-II nanoheterostructure for efficient visible-light photoelectrochemical water oxidation.

In the work reported in this article, we have coupled Ti3+-self-doped TiO2 nanorods (NRs) with a newly synthesized tetrathiophene coupled perylene-based molecule (tThTMP) to form type-II inorganic/organic nanoheterostructures (NHs) for visible-light-driven water oxidation. The small organic molecule helps in better utilizing a wide range of the visible light spectrum, facilitates a faster delocalization of the photogenerated carriers at the inorganic/organic heterojunction, and exhibits improved photoelectrochemical performances. We have further decorated the NHs with platinum nanoparticles (NPs). The decoration of the Pt NPs significantly augments the various aspects of photoelectrochemical performances. The Pt NPs decorated NHs photoanode exhibits a photocurrent density of 0.83 mA/cm2 at 1.23 V vs. RHE (@10 mV/s scan rate), a photoconversion efficiency of 0.26%, a substantial cathodic shift in the water oxidation onset potential and flat band potential, impressively reduced charge transfer resistance, improved photocarrier concentration, photovoltage, and stability.

Aluminium alkyl complexes supported by imino-phosphanamide ligand as precursors for catalytic guanylation reactions of carbodiimides.

Herein, we report the synthesis, characterisation, and application of three aluminium alkyl complexes, [κ2-{NHIRP(Ph)NDipp}AlMe2] (R = Dipp (2a), Mes (2b); tBu (2c), Dipp = 2,6-diisopropylphenyl, Mes = mesityl, and tBu = tert-butyl), supported by unsymmetrical imino-phosphanamide [NHIRP(Ph)NDipp]- [R = Dipp (1a), Mes (1b), tBu (1c)] ligands as molecular precursors for the catalytic synthesis of guanidines using carbodiimides and primary amines. All the imino-phosphanamide ligands 1a, 1b and 1c were prepared in good yield from the corresponding N-heterocyclic imine (NHI) with phenylchloro-2,6-diisopropylphenylphosphanamine, PhP(Cl)NHDipp. The aluminium alkyl complexes 2a, 2b and 2c were obtained in good yield upon completion of the reaction between trimethyl aluminium and the protic ligands 1a, 1b and 1c in a 1 : 1 molar ratio in toluene via the elimination of methane, respectively. The molecular structures of the protic ligands 1b and 1c and the aluminium complexes 2a, 2b and 2c were established via single-crystal X-ray diffraction analysis. Complexes 2a, 2b and 2c were tested as pre-catalysts for the hydroamination/guanylation reaction of carbodiimides with aryl amines to afford guanidines at ambient temperature. All the aluminium complexes exhibited a high conversion with 1.5 mol% catalyst loading and broad substrate scope with a wide functional group tolerance during the guanylation reaction. We also proposed the most plausible mechanism, involving the formation of catalytically active three-coordinate Al species as the active pre-catalyst.

Polycyclic Arene-Fused Selenophenes via Site Selective Selenocyclization of Arylethynyl Substituted Polycyclic Arenes.

Arene-fused selenophenes were synthesized by a redox neutral process from arylethynyl substituted polycyclic arenes using selenium powder in refluxing N-methyl-2-pyrrolidone (NMP) with the assistance of the residual water in NMP as a catalytic proton source. The site-selective nature of this selenocyclization produces trans-alkenes as a competitive product, which is dependent on the π-electron donation ability of polycyclic arenes and the kind of arylethynyl group attached to it. DFT calculations were performed to understand the site selectivity in the selenophene formation reaction. The HOMO coefficient on the carbon adjacent to carbon having arylalkyne substituent of the polycyclic arene correlates with the selenocyclization tendency of the substrate. The wavelength of absorption and emission and quantum yield of emission increase with increasing the number of fused benzene rings in the polycyclic unit (from naphthalene to pyrene).

Localized surface plasmon-enhanced photoelectrochemical water oxidation by inorganic/organic nano-heterostructure comprising NDI-based D-A-D type small molecule.

This research article reports the visible-light-driven photoelectrochemical water oxidation performances of the plasmonic Au-Pd nanoparticle-decorated inorganic/organic nano-heterostructures (NHs)-B-TiO2/NDIEHTh@Au-Pd. The inorganic constituent of the NHs consists of boron-doped TiO2 nanorods (NRs) grown on fluorine-doped tin oxide (FTO) coated glass substrate. The organic part (NDIEHTh) consists of an acceptor naphthalene diimide (NDI)-based donor-acceptor-donor (D-A-D) type small molecule, in which thiophene serves as the donor. Because of the benefits of the localized surface plasmon resonance (LSPR) effect, the Au-Pd binary alloy nanoparticles substantially ameliorate the visible-light-driven photoelectrochemical performances of the B-TiO2/NDIEHTh@Au-Pd NHs photoanode compared to the B-TiO2/NDIEHTh NHs photoanode. The photocurrent densities exhibited by the B-TiO2/NDIEHTh NHs, and B-TiO2/NDIEHTh@Au-Pd NHs photoanodes at 1 V vs Ag/AgCl are 0.68 mA/cm2 and 1.59 mA/cm2, respectively, manifesting 209% and 623% increments in the photocurrent density compared to that shown by B-TiO2 NRs photoanode. Besides, the B-TiO2/NDIEHTh@Au-Pd NHs photoanode offers a significantly cathodically shifted water oxidation potential, reduced charge transfer resistance, better surface injection efficiency, and most importantly, superior photostability compared to the B-TiO2/NDIEHTh NHs photoanode. The enhancement in the different photoelectrochemical performances could be attributed to the various advantages of LSPR, such as enhanced light absorbance, light concentration, hot electron injection, and plasmon-induced resonance energy transfer.

An unconventional route to an ambipolar azaheterocycle and its in situ generated radical anion.

Herein we report the synthesis, characterization and application of an azaheterocycle 4 obtained via an unprecedented C-N coupling. The neutral azaheterocycle undergoes one-electron reduction to form an air-stable radical anion in situ, which provides added benefit towards operational stability of the device during n-type charge transport. The unusual stability of this radical anion is due to the fact that the fused cyclopentane ring upon reduction forms aromatic cyclopentadienyl anion, and the negative charge delocalizes over the nearly planar azaheterocycle core. The present azaheterocycle can be considered as a mimic of a fullerene fragment, which shows balanced ambipolar charge transport in space charge limited current (SCLC) devices with moderate hole (µh) and electron (µe) mobilities (µh = 2.96 × 10-3 cm2 V-1 s-1 and µe = 1.11 × 10-4 cm2 V-1 s-1). Theoretical studies such as nucleus independent chemical shifts (NICS) calculations, anisotropy of the induced current density (ACID) plots, spin density mapping and anisotropic mobility calculations were performed to corroborate the experimental findings.

Boron difluoride formazanates with thiophene and 3,4-ethylenedioxythiophene capping and their electrochemical polymerization.

We report here the first example of BF2 formazanates with thiophene capping and their π-conjugated polymers in the form of electroactive uniform thin films by electrochemical polymerization. These new formazanates and their polymers possess panchromatic absorption with low lying frontier molecular orbitals. With small band gaps (1.5-1.8 eV), they are good candidates for organic electronics and light-harvesting applications. A computational study on the charge transport properties of BF2 formazanates with 3,4-ethylenedioxythiophene (EDOT) indicates an ambipolar semiconductor nature.

Aluminium complex as an efficient catalyst for the chemo-selective reduction of amides to amines.

We report an efficient protocol for the catalytic chemo-selective reduction of tert-amides with pinacolborane (HBpin) to afford the corresponding amines in high yields using aluminium complexes [κ2-{Ph2P(X)NC9H6N}Al(Me)2] [X = S (2a), Se (2b)] as pre-catalysts at room temperature. The aluminium complexes were prepared from the reaction of [Ph2P(X)NC9H6N] [X = S (1a), Se (1b)] and trimethylaluminium in toluene. The solid-state structure of complex 2b is established. Tertiary amides with a wide array of electron-withdrawing and electron-donating functional groups were easily converted to the desired products through the selective cleavage of the amides' C[double bond, length as m-dash]O bond by aluminium hydride as an active species. A kinetic study of the catalytic reaction is also reported.