Dual-jet electrospun PDLGA/PCU nonwovens as promising mesh implant materials with controlled release of sirolimus and diclofenac.

Dual-jet electrospinning was employed to produce two-component, partially degradable drug releasing nonwovens with interlacing of poly(D,L-lactide-co-glycolide) (PDLGA) and different poly(carbonate urethanes) (PCUs). Diclofenac sodium and sirolimus were released simultaneously from the copolyester carrier. The research focused on determining of release profiles of drugs, depending on the hydrophilicity of introduced PCU nanofibers. The influence of drugs incorporation on the hydrolytic degradation of the PDLGA and mechanical properties of nonwovens was also studied. Evaluation for interaction with cells in vitro was investigated on a fibroblast cell line in cytotoxicity and surface adhesion tests. Significant changes in drugs release rate, depending on the applied PCU were observed. It was also noticed, that hydrophilicity of drugs significantly influenced the hydrolytic degradation mechanism and surface erosion of the PDLGA, as well as the tensile strength of nonwovens. Tests carried out on cells in an in vitro experiment showed that introduction of sirolimus caused a slight reduction in the viability of fibroblasts as well as a strong limitation in their capability to colonize the surface of fibers. Due to improvement of mechanical strength and the ability to controlled drugs release, the obtained material may be considered as prospect surgical mesh implant in the treatment of hernia.

Assessment of encrustation and physicochemical properties of poly(lactide-glycolide) - Papaverine hydrochloride coating on ureteral double-J stents after long-term flow of artificial urine.

Implantation of ureteral stents is associated with inconvenience for the patient, which is related to the natural ability of the ureter to contract. The most frequently used solution is the systemic administration of a diastolic drug, which has a relaxing effect on smooth muscle cells and decreases inconvenience. Current interdisciplinary research aimed at reducing the complications after the implantation of ureteral stents used in the treatment of upper urinary tracts with regard to infection, initiation of encrustation, and fragmentation of stents, and patient pain has not been resolved. This study presents the results of research regarding the impact of a biodegradable coating with the active substance on the physical and chemical properties of ureteral stents used in the treatment of the upper urinary tract. The surface of polyurethane double-J stents was coated with poly(lactide-glycolide) (PLGA) 85/15 loaded with papaverine hydrochloride (PAP) with diastolic properties. The coating for ureteral stents has been designed for short-term implantation. The effect of the coating on the process of encrustation and PAP release by the dynamic in vitro model with artificial urine (AU) up to 30 days was evaluated. The influence of AU on the physical and chemical properties of ureteral stents was determined. As part of the study, surface structure and topography researches; chemical composition analyses using X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and wetting; and surface roughness studies of both PUR stents and coated stents were carried out. The proposed biodegradable PLGA+PAP coating is characterized by controlled drug release, while optimal physicochemical properties does not increase the encrustation process.

Dual-jet electrospun PDLGA/PCU nonwovens and their mechanical and hydrolytic degradation properties.

A dual-jet electrospinning was used to mix a different hydrophilicity poly(carbonate urethanes) (PCUs) nanofibers with a biodegradable poly(D,L-lactide-co-glycolide) (PDLGA) copolyester microfibers. As a result, PDLGA/PCU partially degradable nonwovens consisting of an interlaced of both components fibers were obtained. In order to examine the hydrolytic degradation process of polyester fraction, as well as changes that occurred in the mechanical properties of the whole nonwovens, gel permeation chromatography, proton nuclear magnetic resonance spectroscopy, differential scanning calorimetry and scanning electron microscopy as well as static tensile test were performed. Obtained results showed that for the introduction of more hydrophobic PCU nanofibers (ChronoSil), the process of copolyester chain scission slowed down and the erosion mechanism proceeded in bulk. Unexpectedly, even greater deceleration of PDLGA fibers degradation was observed in case of more hydrophilic PCU (HydroThane), and erosion mechanism changed to surface. Enhancement the affinity of the whole nonwoven to the water, manifested by strong water uptake, facilitated the diffusion processes of both: water and acid degradation by-products, which limited autocatalysis reactions of the hydrolysis of ester bonds. On the other hand, strength tests showed the synergy in the mechanical characteristics of both components. Presented method allows influencing the mechanism and rate of polyester degradation without changing its chemical composition and physical properties, affecting only the physical interactions between the nonwoven and the degradation environment, and thus, on diffusion processes. Obtained partially degradable materials possessed also time prolonged functional properties, compared to the copolyester-only nonwoven itself, thus could be considered as promising for biomedical applications e.g. in drug release systems, implants or surgical meshes for supporting soft tissues.

Electrospun paclitaxel delivery system based on PGCL/PLGA in local therapy combined with brachytherapy.

The local administration of different drugs in anticancer therapy continue to attract attention. Thus, the idea of local delivery of cytostatics from nonwoven-structured polyesters seems to be highly desirable. It could reduce systemic drug levels and provide high local concentration of the chemotherapeutics at the tumor site and contribute to enhance the efficiency of the anticancer therapy. Poly(glycolide-ɛ-caprolactone) (PGCL) and poly(D,L-lactide-co-glycolide) (PLGA) synthesized with zirconium-based initiator have been used to prepare electrospun, drug-eluting patches since they possess very good fiber-forming ability. Well-known chemotherapeutic drug-paclitaxel has been loaded into fibrous structure as a model anticancer agent in order to obtain drug delivery systems for local administration. The drug dose in obtained nonwovens might be regulated by the thickness and total area of the implanted patches. Electrospinning of PGCL/PLGA blend allowed to obtain soft and flexible implantable materials. Flexibility has been important factor since it ensures convenient use when covering a tumor or filling a resection cavity. The effectiveness of designed nonwovens presented in the study has been tested in vivo on mouse model of breast cancer. The growth of the tumors was slowed down during in vivo study in comparison with drug-free nonwovens- The volume of the tumor was 40% lower. Drug-loaded electrospun systems implanted locally to the tumor site was further combined with brachytherapy which improved the effectiveness of the therapy in about 18%. Detailed analysis of the nonwovens before and during degradation process has been performed by means of Scanning Electron Microscopy, Differential Scanning Calorimetry, Nuclear Magnetic Resonance, Gel Permeation Chromatography, X-ray Diffraction. The molar mass changes of the nonwoven were quite rapid contrary to changes of comonomer unit content, thermal properties and morphology of the fiber.

Bioresorbable, electrospun nonwoven for delayed and prolonged release of temozolomide and nimorazole.

Glioblastoma multiforme is the most aggressive and lethal form of brain tumour due to the high degree of cancer cells infiltration into surrounding brain tissue. No form of monotherapy can guarantee satisfactory patient outcomes and is only of palliative importance. To find a potential option of glioblastoma treatment the bioresorbable, layer nonwoven mats for controlled temozolomide and nimorazole release were obtained by classical and coaxial electrospinning. Optimization of fibre structure that enables delayed and controlled drug release was performed. The studied bioresorbable polymers were poly(L-lactide-co-ε-caprolactone) and poly(L-lactide-co-glycolide-co-trimethylene carbonate). The physicochemical properties of polymers were determined as well as drug release profiles of nonwoven mats. A combination of coaxial electrospinning and electrospray technique provided three-phased release profiles of temozolomide and nimorazole: the slow release of very low drug doses followed by accelerated release and saturation phase. Results form the basis for further investigation since both studied polymers possess a great potential as nimorazole and temozolomide delivery systems in the form of layered nonwoven implants.

Triple-Shape Memory Behavior of Modified Lactide/Glycolide Copolymers.

The paper presents the formation and properties of biodegradable thermoplastic blends with triple-shape memory behavior, which were obtained by the blending and extrusion of poly(l-lactide-co-glycolide) and bioresorbable aliphatic oligoesters with side hydroxyl groups: oligo (butylene succinate-co-butylene citrate) and oligo(butylene citrate). Addition of the oligoesters to poly (l-lactide-co-glycolide) reduces the glass transition temperature (Tg) and also increases the flexibility and shape memory behavior of the final blends. Among the tested blends, materials containing less than 20 wt % of oligo (butylene succinate-co-butylene citrate) seem especially promising for biomedical applications as materials for manufacturing bioresorbable implants with high flexibility and relatively good mechanical properties. These blends show compatibility, exhibiting one glass transition temperature and macroscopically uniform physical properties.

Biodegradable Electrospun Nonwovens Releasing Propolis as a Promising Dressing Material for Burn Wound Treatment.

The selection of dressing is crucial for the wound healing process. Traditional dressings protect against contamination and mechanical damage of an injured tissue. Alternatives for standard dressings are regenerating systems containing a polymer with an incorporated active compound. The aim of this research was to obtain a biodegradable wound dressing releasing propolis in a controlled manner throughout the healing process. Dressings were obtained by electrospinning a poly(lactide-co-glycolide) copolymer (PLGA) and propolis solution. The experiment consisted of in vitro drug release studies and in vivo macroscopic treatment evaluation. In in vitro studies released active compounds, the morphology of nonwovens, chemical composition changes of polymeric material during degradation process, weight loss and water absorption were determined. For in vivo research, four domestic pigs, were used. The 21-day experiment consisted of observation of healing third-degree burn wounds supplied with PLGA 85/15 nonwovens without active compound, with 5 wt % and 10 wt % of propolis, and wounds rinsed with NaCl. The in vitro experiment showed that controlling the molar ratio of lactidyl to glycolidyl units in the PLGA copolymer gives the opportunity to change the release profile of propolis from the nonwoven. The in vivo research showed that PLGA nonwovens with propolis may be a promising dressing material in the treatment of severe burn wounds.

Effect of vascular scaffold composition on release of sirolimus.

Despite extensive development of bioresorbable drug-eluting vascular scaffolds it is still challenging to achieve controlled drug delivery. The lack of capacity for adjusting the drug dose and inadequate release behavior are one of the main reasons of the side effects. However, so far, mainly biodegradable drug-eluting coatings of metallic stents have been studied in regard to explain drug release mechanisms. The objective of this study was to develop degradable polymer coatings applicable to bioresorbable polymer-based scaffolds. Moreover, a detailed analysis of sirolimus release and scaffold degradation has been conducted. Coating layers of the same composition were applied by the same method on the surface of two different kinds of scaffolds in order to explain the effect of scaffold structure on release process. The developed coatings showed controlled release of antiproliferative agent with elimination of burst effect. However, differences in drug release profile from two kinds of scaffolds were observed. Scaffold composed of polymer with higher lactide content showed slower and bi-phasic, erosion-controlled release of sirolimus. On the contrary, sirolimus release from scaffold composed of polymer with lower content of lactide was mainly controlled by diffusion. These results demonstrate that characteristics of scaffold is another crucial factor that must be considered in further development of bioresorbable vascular scaffolds (BRS) with controlled release of antiproliferative agent.