Electrostatic influence on ion transport through the alphaHL channel.

The current-voltage relationship of a single Staphylococcus aureus alpha-hemolysin (alphaHL) channel is nonlinear, rectifying, and depends on the bulk pH and the ionic strength. The data are described qualitatively by a simple one-dimensional Nernst-Planck analysis in which the fixed charges inside and near the pore's entrances affect the transport of ions through the channel. The distances of these fixed charges from one of the channel's entrances are obtained from the channel's crystal structure. The model demonstrates that rectification of monovalent ion flow through the alphaHL channel can be related to the asymmetry in the location of the ionizable amino acid side chains.

Frequency response of alternating currents through the Staphylococcus aureus alpha-hemolysin ion channel.

Alternating currents were measured through transmembrane ion channels formed by Staphylococcus aureus alpha-hemolysin proteins in planar bilayer membranes as part of an investigation to determine the channel's frequency response and the appropriateness of an equivalent circuit commonly used to model electrical interactions at the surface of cells. The experimental approach includes a novel method for separating the alternating current through one or more channels, which is conductive in nature, from the capacitively coupled current through the membrane. Separation of the conductive and capacitive alternating currents made it possible to measure the frequency response of the alpha-hemolysin channels. The results of the study are consistent with an equivalent circuit of a membrane capacitor in parallel with one or more channel resistors over the frequency range 30-120 Hz. The possible usefulness of frequency response data for ion channels in cell membranes during investigations of biological effects of time-varying magnetic fields is briefly discussed.

Simultaneous multianalyte detection with a nanometer-scale pore.

It was recently shown that naturally occurring, genetically engineered or chemically modified channels can be used to detect analytes in solution. We demonstrate here that the overall range of analytes that can be detected by single nanometer-scale pores is expanded using a potentially simpler system. Instead of attaching recognition elements to a channel, they are covalently linked to polymers that otherwise thread through a nanometer-scale pore. Because the rate of unbound polymer entering the pore is proportional to its concentration in the bulk, the binding of analyte to the polymer alters the latter's ability to thread through the pore, and the signal that results from individual polymer translocation is unique to the polymer type; the method permits multianalyte detection and quantitation. We demonstrate here that two different proteins can be simultaneously detected with this technique.

Driven DNA transport into an asymmetric nanometer-scale pore.

To understand the mechanism by which individual DNA molecules enter nanometer-scale pores, we studied the concentration and voltage dependence of polynucleotide-induced ionic-current blockades of a single alpha-hemolysin ion channel. We find that the blockade frequency is proportional to the polymer concentration, that it increases exponentially with the applied potential, and that DNA enters the pore more readily through the entrance that has the larger vestibule. We also measure the minimum value of the electrical potential that confines a modified polymer inside the pore against random diffusion and repulsive forces.

Microsecond time-scale discrimination among polycytidylic acid, polyadenylic acid, and polyuridylic acid as homopolymers or as segments within single RNA molecules.

Single molecules of DNA or RNA can be detected as they are driven through an alpha-hemolysin channel by an applied electric field. During translocation, nucleotides within the polynucleotide must pass through the channel pore in sequential, single-file order because the limiting diameter of the pore can accommodate only one strand of DNA or RNA at a time. Here we demonstrate that this nanopore behaves as a detector that can rapidly discriminate between pyrimidine and purine segments along an RNA molecule. Nanopore detection and characterization of single molecules represent a new method for directly reading information encoded in linear polymers, and are critical first steps toward direct sequencing of individual DNA and RNA molecules.

Genetically engineered metal ion binding sites on the outside of a Channel's transmembrane beta-barrel.

We are exploring the ability of genetically engineered versions of the Staphylococcus aureus alpha-hemolysin (alphaHL) ion channel to serve as rationally designed sensor components for analytes including divalent cations. We show here that neither the hemolytic activity nor the single channel current of wild-type alphaHL was affected by [Zn(II)]

Designed protein pores as components for biosensors.

BACKGROUND: There is a pressing need for new sensors that can detect a variety of analytes, ranging from simple ions to complex compounds and even microorganisms. The devices should offer sensitivity, speed, reversibility and selectivity. Given these criteria, protein pores, remodeled so that their transmembrane conductances are modulated by the association of specific analytes, are excellent prospects as components of biosensors. RESULTS: Structure-based design and a separation method that employs targeted chemical modification have been used to obtain a heteromeric form of the bacterial pore-forming protein staphylococcal alpha-hemolysin, in which one of the seven subunits contains a binding site for a divalent metal ion, M(II), which serves as a prototypic analyte. The single-channel current of the heteromer in planar bilayers is modulated by nanomolar Zn(II). Other M(II)s modulate the current and produce characteristic signatures. In addition, heteromers containing more than one mutant subunit exhibit distinct responses to M(II)s Hence, a large collection of responsive pores can be generated through subunit diversity and combinatorial assembly. CONCLUSIONS: Engineered pores have several advantages as potential sensor elements: sensitivity is in the nanomolar range; analyte binding is rapid (diffusion limited in some cases) and reversible; strictly selective binding is not required because single-channel recordings are rich in information; and for a particular analyte, the dissociation rate constant, the extent of channel block and the voltage-dependence of these parameters are distinguishing, while the frequency of partial channel block reflects the analyte concentration. A single sensor element might, therefore, be used to quantitate more than one analyte at once. The approach described here can be generalized for additional analytes.

The charge state of an ion channel controls neutral polymer entry into its pore.

Electrostatic potentials created by fixed or induced charges regulate many cellular phenomena including the rate of ion transport through proteinaceous ion channels. Nanometer-scale pores of these channels also play a critical role in the transport of charged and neutral macromolecules. We demonstrate here that, surprisingly, changing the charge state of a channel markedly alters the ability of nonelectrolyte polymers to enter the channel's pore. Specifically, we show that the partitioning of differently-sized linear nonelectrolyte polymers of ethylene glycol into the Staphylococcus aureus alpha-hemolysin channel is altered by the solution pH. Protonating some of the channel side chains decreases the characteristic polymer size (molecular weight) that can enter the pore by approximately 25% but increases the ionic current by approximately 15%. Thus, the "steric" and "electric" size of the channel change in opposite directions. The results suggest that effects due to polymer and channel hydration are crucial for polymer transport through such pores.

Characterization of individual polynucleotide molecules using a membrane channel.

We show that an electric field can drive single-stranded RNA and DNA molecules through a 2.6-nm diameter ion channel in a lipid bilayer membrane. Because the channel diameter can accommodate only a single strand of RNA or DNA, each polymer traverses the membrane as an extended chain that partially blocks the channel. The passage of each molecule is detected as a transient decrease of ionic current whose duration is proportional to polymer length. Channel blockades can therefore be used to measure polynucleotide length. With further improvements, the method could in principle provide direct, high-speed detection of the sequence of bases in single molecules of DNA or RNA.

Interaction of poly(ethylene-glycols) with air-water interfaces and lipid monolayers: investigations on surface pressure and surface potential.

We have characterized the surface activity of different-sized poly(ethylene-glycols) (PEG; M(r) 200-100,000 Da) in the presence or absence of lipid monolayers and over a wide range of bulk PEG concentrations (10(-8)-10% w/v). Measurements of the surface potential and surface pressure demonstrate that PEGs interact with the air-water and lipid-water interfaces. Without lipid, PEG added either to the subphase or to the air-water interface forms relatively stable monolayers. Except for very low molecular weight polymers (PEGs < 1000 Da), low concentrations of PEG in the subphase (between 10(-5) and 10(-4)% w/v) increase the surface potential from zero (with respect to the potential of a pure air-water interface) to a plateau value of approximately 440 mV. At much higher polymer concentrations, > 10(-1)% (w/v), depending on the molecular weight of the PEG and corresponding to the concentration at which the polymers in solution are likely to overlap, the surface potential decreases. High concentrations of PEG in the subphase cause a similar decrease in the surface potential of densely packed lipid monolayers spread from either diphytanoyl phosphatidylcholine (DPhPC), dipalmitoyl phosphatidylcholine (DPPC), or dioleoyl phosphatidylserine (DOPS). Adding PEG as a monolayer at the air-water interface also affects the surface activity of DPhPC or DPPC monolayers. At low lipid concentration, the surface pressure and potential are determined by the polymer. For intermediate lipid concentrations, the surface pressure-area and surface potential-area isotherms show that the effects due to lipid and PEG are not always additive and that the polymer's effect is distinct for the two lipids. When PEG-lipid-mixed monolayers are compressed to surface pressures greater than the collapse pressure for a PEG monolayer, the surface pressure-area and surface potential-area isotherms approach that of the lipid alone, suggesting that for this experimental condition PEG is expelled from the interface.

Low conductance states of a single ion channel are not 'closed'.

We have used a polymer-exclusion method to estimate the sizes of the high- and low-conductance states of Staphylococcus aureus alpha-toxin channels across planar lipid bilayers. Despite a > 10-fold difference in conductance between high- and low-conductance states, the size differs by < 2-fold. We conclude that factors other than the dimensions have a strong influence on the conductance of alpha-toxin channels. We also show that the high conductance state is destabilized by the presence of high molecular weight polymers outside the channel, compatible with the removal of channel water as the high conductance state "shrinks" to the low conductance state.

Protonation dynamics of the alpha-toxin ion channel from spectral analysis of pH-dependent current fluctuations.

To probe protonation dynamics inside the fully open alpha-toxin ion channel, we measured the pH-dependent fluctuations in its current. In the presence of 1 M NaCl dissolved in H2O and positive applied potentials (from the side of protein addition), the low frequency noise exhibited a single well defined peak between pH 4.5 and 7.5. A simple model in which the current is assumed to change by equal amounts upon the reversible protonation of each of N identical ionizable residues inside the channel describes the data well. These results, and the frequency dependence of the spectral density at higher frequencies, allow us to evaluate the effective pK = 5.5, as well as the rate constants for the reversible protonation reactions: kon = 8 x 10(9) M-1 s-1 and koff = 2.5 x 10(4) s-1. The estimate of kon is only slightly less than the diffusion-limited values measured by others for protonation reactions for free carboxyl or imidazole residues. Substitution of H2O by D2O caused a 3.8-fold decrease in the dissociation rate constant and shifted the pK to 6.0. The decrease in the ionization rate constants caused by H2O/D2O substitution permitted the reliable measurement of the characteristic relaxation time over a wide range of D+ concentrations and voltages. The dependence of the relaxation time on D+ concentration strongly supports the first order reaction model. The voltage dependence of the low frequency spectral density suggests that the protonation dynamics are virtually insensitive to the applied potential while the rate-limiting barriers for NaCl transport are voltage dependent. The number of ionizable residues deduced from experiments in H2O (N = 4.2) and D2O (N = 4.1) is in good agreement.