[SPREADING OF TISSUE SPHEROIDS FROM PRIMARY HUMAN FIBROBLASTS ON THE SURFACE OF MICROFIBROUS ELECTROSPUN POLYURETHANE MATRIX (A scanning electron microscopic study)].

Tissue spheroids biofabricated from primary human fibroblasts using non-adhesive agarose forms, were placed by 3D bioprinter on the surface of microfibrous electrospun matrix. It was demonstrated that tissue spheroids attached to the surface of matrix during several hours and then gradually spread for several days which indicates high level of biocompatibiity of electrospun microfibrous polyurethane matrix. During this activity, human fibroblasts used processes of leading cell borders for initial step of attachment to matrix filaments. Tissue constructions formed during spreading of tissue spheroids on the surface of electrospun microfibrous polyurethane matrix seem to be a perspective technology platform for development of new methods of biofabrication and 3D bioprinting.

The proper delivery pressure for cardioplegic solution in neonatal cardiac surgery - an investigation of biomechanical and structural properties of neonatal and adult coronary arteries.

When cardioplegic solution is injected into coronary arteries with a pump in order to ensure myocardial protection, it is necessary to determine the correct delivery pressure to avoid damage of the heart. Biomechanical and structural properties of the neonatal coronary artery wall should be taken into account when determining the delivery pressure. We investigated twelve coronary artery specimens without cardiac pathology retrieved from autopsies of neonates 9.3 ± 9.7 days old and compared them to adult specimens with no detected atherosclerosis. There was a rapid increase in the strain until the inner pressure reached 80 - 100 mmHg, whilst the increase of stress in the wall of the neonatal coronary arteries was less rapid. When the pressure exceeded 100 mmHg, the increase in the strain slowed down, whilst the wall stress and modulus of elasticity began to increase rapidly. Morphologic examination of tensile properties revealed prominent affection of the vascular wall of the neonates, with accentuated redistribution (loosening) of medial myocytes and the adventitial vasa vasorum. Collectively, a raised inner pressure applied to cardioplegic solution injected into the coronary artery of a neonate may increase the risk of structural damage to the vascular wall.

Biofabrication: a 21st century manufacturing paradigm.

Biofabrication can be defined as the production of complex living and non-living biological products from raw materials such as living cells, molecules, extracellular matrices, and biomaterials. Cell and developmental biology, biomaterials science, and mechanical engineering are the main disciplines contributing to the emergence of biofabrication technology. The industrial potential of biofabrication technology is far beyond the traditional medically oriented tissue engineering and organ printing and, in the short term, it is essential for developing potentially highly predictive human cell- and tissue-based technologies for drug discovery, drug toxicity, environmental toxicology assays, and complex in vitro models of human development and diseases. In the long term, biofabrication can also contribute to the development of novel biotechnologies for sustainable energy production in the future biofuel industry and dramatically transform traditional animal-based agriculture by inventing 'animal-free' food, leather, and fur products. Thus, the broad spectrum of potential applications and rapidly growing arsenal of biofabrication methods strongly suggests that biofabrication can become a dominant technological platform and new paradigm for 21st century manufacturing. The main objectives of this review are defining biofabrication, outlining the most essential disciplines critical for emergence of this field, analysis of the evolving arsenal of biofabrication technologies and their potential practical applications, as well as a discussion of the common challenges being faced by biofabrication technologies, and the necessary conditions for the development of a global biofabrication research community and commercially successful biofabrication industry.

Changes in the mechanical properties, biochemical contents and wall structure of the human coronary arteries with age and sex.

An experimental study of the mechanical properties, biochemical composition and structure was carried out on the proximal and distal parts of the right and the anterior descending branch of left human coronary arteries. The vessels were removed during an autopsy of 121 males and 84 females being 1 day to 80 years old. The material was divided into six age groups. Branchless segments of vessels 15-20 mm long were cut from proximal and distal parts. The mechanical properties of the coronary arteries were determined by passing fluid at pressures ranging from 0 to 240 mmHg. It was found that the part of the wall of the coronary artery adjacent to the myocardium is thicker in all cases than the other part of the arterial wall. With increasing age the mean thickness of the wall of both coronary arteries increases but the wall-thickening process is non-uniform in nature in both the proximal and distal parts and in the individual layers. The changes in the stretch ratio and tangential modulus in circumferential direction with age and sex were investigated. The greatest changes in the wall thickness and in the mechanical parameters were found for the left coronary artery wall in men over 40 years of age and for the right coronary artery wall in women over 50 years of age. The results of biochemical and densitometric investigations were compared.

Biomechanics of human common carotid artery and design of novel hybrid textile compliant vascular grafts.

The mechanical properties and structure of a human common carotid artery were studied in order to develop criteria for designing and manufacturing compliant textile vascular grafts. The arterial wall comprised a composite of elastin and collagen fibers with the collagen fibers crimped. This structure led to a unique pressure-circumferential stretch ratio curve, the slope of which increased with an increase in strain. The increase in slope was particularly rapid at a stretch ratio above 1.4 or pressure above 120 mmHg. Based on the knowledge gained, a criteria for the design of biomechanically compliant arterial grafts was developed. An elastomeric prestretched polyurethane monofilament yarn with a low modulus of elasticity and a bulked polyester multifilament yarn with a high modulus of elasticity were combined and used as threads in the manufacture of grafts. Tubular structures of diameters in the range 4-6 mm were made by weaving. Transverse compliance and morphological and permeability properties of these grafts were determined and compared with those of a currently available woven commercial grafts and human carotid arteries. Results indicated that the compliance values of the hybrid grafts were comparable with those of the human carotid artery. Preliminary in vivo studies in dogs showed promising results: a thin, stable neointima developed within 6 months of implantation on the flow surface.

Biomechanical effects of experimental transluminal angioplasty.

Surgical treatment of vertebrobasilar circulation disorders includes percutaneous transluminal angioplasty more often recently. However, the biomechanical aspects of transluminal angioplasty have not been studied sufficiently so far. 148 left and right vertebral artery segments were taken from 24 autopsy subjects (14 male and 10 female) aged from 20 to 75, who had neither systemic nor cerebrovascular lesions. Biomechanical examination and experimental transluminal angioplasty (ETA) of the tubular segments of vertebral artery (VA) were carried out by the special equipment developed for this purpose. The data were obtained using telemetrical, morphometrical and hystological methods. The biomechanical properties taken in the conditioned physiological rate are different for each segment of the VA. The stiffness of VA wall increases with age (mainly after 40 years), particularly in segments V1 and V3. Nevertheless, after high intravascular pressure application the diameter response of VA to intravascular fluid pressure increases if sufficient structural damage of the arterial wall was made.

Biomechanical and structural properties of the explanted bioprosthetic valve leaflets.

Porcine bioprosthesis were treated with 0.625% glutaraldehyde and stabilized under changing pressure from 4 to 30 mmHg. Bovine pericardium and 12 biovalves (of age between 14 days and 80 months) after implantation in the human body were investigated (7 porcine PB and 5 pericardial bioprosthesis--PCB). Circumferential and radial strips from porcine aortic valve leaflets, bovine pericardium and bioprosthetic leaflets were studied in light, transmitting and scanning electron microscopy. Uniaxial load tests were carried out to examine the deformability and strength of these tissues. Microscopic examination of the biovalves revealed that the PB and PCB tissue retained its original architecture, but with alterations in detailed structure. The collagen bundles stuck together with vacuolization between them. There were some areas of the collagen structure fragmentation which could lead to complete necrosis. Eighty months after implantation in patients, the PCB became more extensible and its ultimate strain increases 2.5 times. Ultimate stress decreases in the radial direction from 9.43 to 2.88 MPa, and in the circumferential direction from 9.43 to 6.44 MPa. Forty-eight months after implantation, PB tissue's ultimate stress decreases in the circumferential direction from 4.06 to 1.99 MPa. At the same time ultimate strain increases from 13 to 22%. This study is to improve the methods of tissue stabilization in 0.625% glutaraldehyde solution for the first 48 h at cyclic, changing construction of biovalves soft supporting stent after 48 h.

Amplification of ribosomal genes and formation of extrachromosomal nucleoli in oocytes of starfish Henricia hayashi (Asteroidea: Echinasteridae).

DNA and RNA specific dyes, Ag-NOR staining and in situ hybridization were used for studying the nucleolar apparatus in the growing oocytes of Henricia hayashi (Asteroidea: Echinasteridae). A plasmid containing ribosomal genes of Drosophila melanogaster (Kolchinsky et al., 1980) labelled with 3H by nick-translation served as an rDNA probe. Multiple extrachromosomal nucleoli are formed by the cascade type as a result of growth and subsequent fragmentation of the chromosomal (primary) rDNA body and its derivative extrachromosomal (secondary) rDNA bodies. Ribosomal genes were shown in all nucleolar structures. Argentophilia of the primary and secondary DNA bodies appears to be due to the dense packing of the rDNA-containing material. Ag(+) NORs were detected in the extrachromosomal multiple nucleoli and NOR complexes. Amplification of rDNA is a highly probable conclusion from the existing data.