Synthesis, crystal structure and molecular conformation of Nalpha-Boc-L-leucyl-(Z)-beta-(3-pyridyl)-alpha,beta- dehydroalanyl-L-leucine methyl ester.

A protected tridehydropeptide containing (Z)-beta-(3-pyridyl)-alpha,beta-dehydroalanine (Delta(Z)3Pal) residue, Boc-Leu-Delta(Z)3Pal-Leu-OMe (1), was synthesized via Erlenmeyer azlactone method. X-ray crystallographic analysis revealed that the peptide 1 adopts an extended conformation, which is similar to that of a Delta(Z)Phe analog, Boc-Leu-Delta(Z)Phe-Leu-OMe (2).

Facile synthesis of Nalpha-protected-L-alpha,gamma-diaminobutyric acids mediated by polymer-supported hypervalent iodine reagent in water.

Hofmann rearrangement of Nalpha-Boc-L-Gln-OH mediated by a polymer-supported hypervalent iodine reagent poly[(4-diacetoxyiodo)styrene] (PSDIB) in water afforded Nalpha-Boc-L-alpha,gamma-diaminobutyric acid (Boc-Dab-OH, 1) in 87% yield. Nalpha-Z-derivative (Z-Dab-OH, 2) was prepared with PSDIB in 83% yield. Since the reaction of Nalpha-Fmoc-Gln-OH by this procedure did not proceed because of the insolubility of Fmoc-Gln-OH in aqueous media, we synthesized Fmoc-Dab(Boc)-OH (5) from 2 in 54% yield. Polymyxin B heptapeptide (PMBH) which contains four Dab residues was successfully synthesized in a solution-phase synthesis.

Conformation of the transmembrane domains in peripheral myelin protein 22. Part 1. Solution-phase synthesis and circular dichroism study of protected 17-residue partial peptides in the first putative transmembrane domain.

Charcot-Marie-Tooth disease (CMT) is the most commonly inherited peripheral neuropathy. DNA duplication and point mutation of the gene encoding peripheral myelin protein 22 (PMP22) have been found in CMT type 1A dominants. To investigate the influence of the point mutation of PMP22 on the secondary structure, protected partial peptides in the putative first transmembrane domain, wild type Boc-IVLH(Bom)VAVLVLLFVSTIV-OMe (1) and its Pro16 mutant Boc-IVLH(Bom)VAVPVLLFVSTIV-OMe (2) were synthesized. Circular dichorism (CD)-spectral analysis suggested that peptide 1 adopts a stable alpha-helical conformation in membrane-mimetic solvent,1-BuOH/1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) system. On the contrary, the mutant 2 favors beta-sheet conformation in the same solvent system. Interestingly, alpha-helix to beta-sheet transition of 2 was observed at higher contents of 1-BuOH than 70%.

Controlled release of biomolecules from temperature-sensitive hydrogels prepared by radiation polymerization.

Poly(acryloyl-L-proline methyl ester)-based hydrogels containing 1 and 5% of a crosslinking agent were studied as drug delivery systems. The drug loading properties were investigated by matrix incubation into solutions containing biomolecules with molecular weight ranging between 300 and 65,000 Da. The loading yield was found to depend on both the crosslinking degree and the molecular weight of the drug. In vitro release studies were carried out with both swollen and dry matrices loaded with gentamicin, isoniazid and insulin. Gentamicin and isoniazid were released by a bimodal Fickian diffusion with a remarkable burst that was found to depend on both matrix crosslinking degree and physical state. In vivo, the subcutaneous implantation into mice of the isoniazid loaded matrices allowed for an efficient drug release for 800 h. In vitro insulin was released from the swollen matrices for 1500 h by diffusional Fickian mechanism while the dry ones displayed a lag time followed by Fickian diffusion release. The subcutaneous implantation of the insulin-loaded matrices into diabetic mice induced a remarkable decrease in the glucose concentrations in blood. In particular, the dry 1% matrices were found to maintain a low glucose level for 700 h.

Release behavior of ketoprofen from poly(acryloyl-L-proline methyl ester) gels having different crosslinked networks.

In order to clarify the relationship between the crosslinked structure of thermo-responsive polymer and drug release profile, polymer gels based on acryloyl-L-proline methyl ester (A-ProOMe) were synthesized in a mixture of water and acetone by the following two methods: a simultaneously occurring process of radiation-induced polymerization and crosslinking without a crosslinker (self-bridging method), and radiation-induced polymerization in the presence of the crosslinker tetradecaethylene glycol dimethacrylate (crosslinker method). The pronounced gap in thermo-response between two A-ProOMe gels, with an apparent degree of crosslinking of 11 for 1-propanol, shows a different shrinking pattern in the initial stage of time. The gels, which were obtained with the self-bridging method and the crosslinker method, were kept constant at a swelling ratio of 17 in water at 0 degree C for all systems. However, those values fell to 0.5 and 4, respectively, at 10 min after the temperature was increased to 37 degrees C. The release mechanism of ketoprofen from two gel devices showed an anomalous (non-Fickian) transport, in which the release of ketoprofen with a low water-solubility could be directly related to the rapid release of water accompanying a gel shrinkage.

Crystal structure of a depsipeptide, Boc-(Leu-Leu-Lac)3-Leu-Leu-OEt.

A sequential polydepsipeptide, Boc-(Leu-Leu-Lac)3-Leu-Leu-OEt (1) (Lac = L-lactic acid residue) has been synthesized by the segment condensation method. The sequential unit of 1, -Leu-Leu-Lac-, is consisted of two amino acid residues and one hydroxy acid residue. X-ray diffraction measurement with an imaging plate detector and a direct-methods procedure of Shake-and-Bake successfully revealed the crystal structure of 1. In the solid state, the 11-mer depsipeptide, 1, have clear alpha-helical conformation even with the three ester linkages.

Preparation and properties of novel gramicidin S analogs possessing a tri-, tetra- or pentamethylene bridge between ornithine side chains.

Gramicidin S (GS) analogs in which the Ndelta atoms of the two Orn side chains are linked by an oligomethylene bridge [-(CH2)n-; n=3-5] were prepared via the bis(p-nitrobenzenesulfonyl) derivative [Orn(NBS)2,2']GS. For comparison the nonbridged secondary amino group-containing analog [Orn(Me)2,2']GS was also prepared. 1H NMR and CD spectral analysis indicated that these analogs adopt the same beta-sheet conformation as GS. The antimicrobial activities of these analogs were very similar, but were slightly dependent on the bridge chain length, the trimethylene-bridged analog being the most potent.

Swelling and ketoprofen release characteristics of thermo- and pH-responsive copolymer gels.

Swelling-controlled drug delivery copolymer gels were newly synthesized by introducing thermo- and pH-responsive methacryloyl-glycine (MA-Gly) or pH-responsive methacrylic acid (MA-Ac) for comparison with thermoresponsive acryloyl-L-proline ethyl ester (A-ProOEt). A homopolymer gel of A-ProOEt was kept at degrees of swelling that were less than 0.5 at a pH from 2.5 to 7.5 at 37 degrees C. The thresholds of swelling for copolymer gels consisting of A-ProOEt/MA-Gly and A-ProOEt/MA-Ac with a composition of 40/60 mol% were found to be pH 3.0 and pH 5.5, respectively, in buffer solutions at 37 degrees C. The diffusion characteristics of 2-(3-benzoylphenyl)propionic acid (ketoprofen) from such copolymer gels was evaluated in buffer solutions at pH's more than 5.5, and it was found that A-ProOEt/MA-Gly gel possesses a case II transport mechanism that is completely linear time dependent in both the amount diffused and the penetrating swelling front position. On the other hand, A-ProOEt/MA-Ac gel exhibited a non-Fickian (or anomalous) diffusion behavior under the same conditions.

Sequential polydepsipeptides as biodegradable carriers for drug delivery systems.

Sequential polydepsipeptides containing both peptide and ester bonds, poly[(L-alanyl)n-gamma-ethyl L-glutamyl-L-lactyl] (n = 0, 1, 2, and 3) (poly[(Ala)n-Glu(OEt)-Lac]), were prepared for application as biodegradable carriers for drug delivery systems. The in vivo degradation of these polymers was evaluated by subcutaneous implantation in the backs of male rats, and was strongly influenced by the number (n) of Ala units in poly[(Ala)n-Glu(OEt)-Lac]. The resulting poly(Ala-Ala-Glu(OEt)-Lac) gave the highest degradability, in which 100% degradation was observed 24 weeks from the start of implantation. A luteinizing-hormone-releasing hormone agonist des-Gly10-[D-Leu6]-LH-RH ethylamide (LH-RH agonist), was incorporated into a sequential poly(Ala-Ala-Glu(OEt)-Lac) carrier by the melt-pressing technique, which gave fine cylindrical polymer formulations with different structures of drug dispersion, e.g., blend-type and sandwich-type formulations. The rate of in vivo release of LH-RH agonist from a blend-type formulation showed a linear decrease with time until its release was finished after 6 weeks' implantation. In contrast, in a sandwich-type formulation, the in vivo release rate was apparently maintained constant over a period of 16 weeks (24 +/- 14 micrograms/day).

Experimental evidence for predicted transmembrane peptide topography: incorporation of hydrophobic peptide alpha-helical rods with an N-terminal positive charge having a length comparable to the thickness of lipid bilayers into the membranes.

Liposomes consisting of egg yolk phosphatidylcholine and hydrophobic peptides Nps- and Cl-.+H2-(Met-Met-Leu)n-OEt (n = 6-10) with various polypeptide chain lengths were prepared by the sonication method. The conformation of the peptides incorporated into the liposomes was examined by CD spectroscopy. All the peptides incorporated assumed alpha-helical conformation. Quantitative analyses of the peptides and lipids in the membranes showed that the concentration of the peptides with a positive charge at the N-terminus in the liposomes decreased markedly as the peptide chain length increased, reaching zero for the peptides over n = 8. The peptides without a positive charge were hardly incorporated into the liposomes. Infrared attenuated reflection spectroscopy of multilayered membranes containing the peptides suggests that the axis of the alpha-helical peptide rods is oriented in parallel with the molecular axis of lipids in the membranes. These results suggest that the hydrophobic peptides can be incorporated into the lipid bilayers of the liposomes in the alpha-helical conformation, the rods of which have a length comparable to the thickness of the lipid bilayers, and the N-terminal positive charge of the peptides is essential for the stable peptide incorporated into the membranes.

Mode of action towards oligopeptides and proteins of hydrolase H, a high-molecular-weight aminoendopeptidase from rabbit skeletal muscle.

The mode of action towards oligopeptides and proteins of hydrolase H purified from rabbit skeletal muscle was studied. The presence of protamine or alpha-N-benzoylarginine p-nitroanilide (an endopeptidase substrate) changed both the Km and V values of the enzyme towards Leu-beta-naphthylamide (an aminopeptidase substrate). This indicates that the binding site for an endopeptidase substrate is different from that for an aminopeptidase substrate. Hydrolase H as an aminopeptidase displayed broad specificity. The enzyme hydrolyzed various dipeptides readily except the dipeptides containing Pro or an amino acid with a hydrophobic beta-branched chain at the NH2 terminus. Pro and Val at the NH2 terminus of tripeptides were also difficult to release, whereas Ile and Val of tetrapeptides were easily released in contrast with those of dipeptides. The longer the peptide chain of Glyn (n = 2, 3, 4), the more susceptible was it to hydrolase H. Hydrolase H behaved as an endopeptidase only towards protamine among the proteins tested. The other proteins, casein, bovine serum albumin, myofibrils, troponin, hemoglobin, sarcoplasmic proteins, and myoglobin were probably attacked only by the aminopeptidase activity of the enzyme.