Understanding controlled drug release from mesoporous silicates: theory and experiment.

Based on the results of carefully designed experiments upgraded with appropriate theoretical modeling, we present clear evidence that the release curves from mesoporous materials are significantly affected by drug-matrix interactions. In experimental curves, these interactions are manifested as a non-convergence at long times and an inverse dependence of release kinetics on pore size. Neither of these phenomena is expected in non-interacting systems. Although both phenomena have, rather sporadically, been observed in previous research, they have not been explained in terms of a general and consistent theoretical model. The concept is demonstrated on a model drug indomethacin embedded into SBA-15 and MCM-41 porous silicates. The experimental release curves agree exceptionally well with theoretical predictions in the case of significant drug-wall attractions. The latter are described using a 2D Fokker-Planck equation. One could say that the interactions affect the relative cross-section of pores where the local flux has a non-vanishing axial component and in turn control the effective transfer of drug into bulk solution. Finally, we identify the critical parameters determining the pore size dependence of release kinetics and construct a dynamic phase diagram of the various resulting transport regimes.

Determination of zinc incorporation in the Zn-substituted gallophosphate ZnULM-5 by multiple wavelength anomalous dispersion techniques.

The location of isomorphously substituted zinc over eight crystallographically different gallium sites has been determined in a single-crystal study of the gallophosphate ZnULM-5, Ga((16-x))Zn(x)(PO(4))(14)(HPO(4))(2)(OH)(2)F(7), [H(3)N{CH(2)}(6)NH(3)](4), 6H(2)O, in an 11 wavelength experiment, using data from Station 9.8, SRS Daresbury. The measurement of datasets around the K edges of both Ga and Zn, as well as two reference datasets away from each absorption edge, was utilized to selectively exploit dispersive differences of each metal atom type in turn, which allowed the major sites of Zn incorporation to be identified as the metal 1 and 3 sites, M1 and M3. The preferential substitution of Zn at these sites probably arises because they are located in double four-ring (D4R) building units which can relax to accommodate the incorporation of hetero atoms. As the crystal is non-centrosymmetric, with space group P2(1)2(1)2, it was also possible to use anomalous differences to corroborate the results obtained from the dispersive differences. These results were obtained firstly from difference Fourier maps, calculated using a phase set from the refined structure from data measured at the Zr K edge. Also, refined dispersive and anomalous occupancies, on an absolute scale, could be obtained using the program MLPHARE, allowing estimates for the Zn incorporation of approximately 22 and 18 at. % at the M1 and M3 sites to be obtained. In addition, f' and f'' values for Ga and Zn at each wavelength could be estimated both from MLPHARE results, and by refinement in JANA2006. The fully quantitative determinations of the dispersive and anomalous coefficients for Ga and Zn at each wavelength, as well as metal atom occupancies over the eight metal atom sites made use of the CCP4's MLPHARE program as well as SHELXL and JANA2006. The results by these methods agree closely, and JANA2006 allowed the ready determination of standard uncertainties on the occupancy parameters, which were for M1 and M3, 20.6 (3) and 17.2 (3) at %, respectively.

Mesoporous aluminophosphate thin films with cubic pore arrangement.

Mesoporous aluminophosphate thin films with 3D cubic (Im3m) pore arrangement were synthesized for the first time. Thin films were templated with block copolymer nonionic templates Pluronic F127 and F108 and deposited on a glass substrate by dip-coating. In situ SAXS investigations show the formation of a highly ordered mesostructure upon the dip-coating process, which remains stable up to at least 670 K. A cubic mesostructure was observed also by TEM. Template removal process was monitored by TG and FT-IR. A transition from an amorphous aluminophosphate gel to a well-defined aluminophosphate framework was observed by MAS NMR.

Characterization of calcium alginate beads containing structurally similar drugs.

The aim of this study was to investigate the characteristics of alginate beads prepared by ionotropic gelation in which structurally similar drugs were incorporated. For this purpose theophylline and theobromine were selected as model drugs. The influence of incorporated drugs on bead characteristics such as size, shape, and morphology, as well as encapsulation efficiency, was examined. It was found that theobromine as well as theophylline content in beads significantly decreased with increasing hardening time due to drug diffusion into the hardening media. In theobromine beads the drug content was extremely improved by dropping the alginate and drug solution into an acidic calcium chloride solution, while theophylline content was to some extent improved by the hardening of beads in a calcium chloride solution saturated with the drug. The most evident difference between theophylline and theobromine beads was in their shape and morphology. Theobromine beads were round, while theophylline ones had an irregular shape with an extremely wrinkled surface. The distinction in shape was highly dependent on drug content. Additionally, it was demonstrated that beads' shape was dependent on preparation conditions as well. On the basis of x-ray powder diffraction (XRPD) and differential scanning calorimetry (DSC) analyses and scanning electron microscope (SEM) photographs it was found that the most of the drug in bead was present in an amorphous state. Therefore, it is suggested that some drug-alginate interactions could be present in beads and might be responsible for the different shape of theophylline and theobromine beads. Thus it can be concluded that the preparation of beads by ionotropic gelation cannot be generalized even though structurally similar drugs are incorporated.

The use of softer X-rays in the structure elucidation of microporous materials.

Microporous materials, such as zeolites and aluminophosphates, have many applications as molecular sieves and shape-selective catalysts. This is due to their three-dimensional frameworks, which contain regular pores and channels, to their high acidity, arising from Brønsted and Lewis acid active sites, and to the incorporation of transition metal atoms into framework sites. This review firstly provides an introduction into the nature and properties of these materials, and their important applications; the difficulties in their full characterization and possible methods of elucidating their structures are then outlined; finally, methods of characterization, utilizing 'softer X-rays' are introduced. The first method is the determination of low concentrations of transition metals, incorporated into the frameworks using single crystal anomalous dispersion crystallography; synchrotron radiation is used to tune to the absorption edge of the metal atom in question, in order to change its signal relative to that of the rest of the structure, thereby allowing the pinpointing of its positions and the determination of its concentration at each site in the framework. Secondly, the use of longer wavelengths in powder diffraction studies is described, which, by stretching out the powder pattern, thereby reduces the overlapping of the diffraction peaks, thus allowing the structure to be solved by conventional direct methods. Finally, the use of X-ray absorption spectroscopy to determine the metal incorporation and the nature of coordination at the metal atom sites, in Mn silicalite-1 and FAPO-36, are described.

Incorporation of Mn, Co and Zn cations into large-pore aluminophosphate molecular sieves MeAPO-50.

Large-pore metal modified aluminophosphate molecular sieves MeAPO-50 (Me=Co,Zn,Mn) were synthesised by hydrothermal crystallisation using di-n-propylamine as structure directing agent. EXAFS and XRD analysis show that cobalt(II), manganese(II) and zinc(II) are incorporated into the non-phosphorus tetrahedral framework sites of MeAPO-50 on the threefold-axis site, and on a site in a general position in the unit cell. Results of both methods on distribution of the metal over the two sites are compared.

Determination of the site of incorporation of cobalt in CoZnPO-CZP by multiple-wavelength anomalous-dispersion crystallography.

Data were collected from a crystal of CoZnPO-CZP {sodium cobalt-zinc phosphate hydrate, Na(6)[Co(0.2)Zn(0.8)PO(4)](6).6H(2)O} using synchrotron radiation at ELETTRA at the inflection point and 'white line' for both the cobalt and zinc K edges, and at 1.45 Å, a wavelength remote from the K edges of both metals. The data were processed using the programs DENZO and SCALEPACK. The CCP4 program suite was used for the scaling of data sets and the subsequent calculation of dispersive difference Fourier maps. Optimal scaling was achieved by using a subset of reflections with little or no contribution from the metal atoms (i.e. which were essentially wavelength independent in their intensities) and using weights based on the sigma's to obtain an overall scale factor in each case. Phases were calculated with SHELXL97 based on the refined structure using a much higher resolution and complete Cu Kalpha data set. An occupancy of 100% by zinc at the two metal-atom sites was assumed. The dispersive difference Fourier map calculated for zinc gave two peaks above the background of similar heights at the expected metal-atom sites. The peak height at the Zn1 site was a little higher than at the Zn2 site. The dispersive difference Fourier map calculated for cobalt gave just one peak above the background, at the Zn1 site, and only a small peak at the Zn2 site, thus indicating that incorporation of cobalt takes place mainly at one site. Refinement of the zinc occupancies using MLPHARE reinforces this conclusion. The chemical environment of each site is discussed.

31P spin-lattice relaxation in cobalt-containing aluminophosphate molecular sieves.

Phosphorus spin-lattice relaxation was studied in aluminophosphate molecular sieves containing various concentrations of either framework or non-framework cobalt. The behaviour of nuclear magnetisation in the presence of these paramagnetic centres was described successfully in the limit of no spin-diffusion. The diffusionless regime was strongly indicated with non-exponential magnetisation recovery and was therefore easy to recognise. According to the model, spin-lattice relaxation rates depend on the square of cobalt concentration. Measured relaxation rates agreed well with calculations if effective cobalt concentration was considered rather than the average one. The latter was obtained by bulk elemental analysis, while the former was extracted from cobalt concentration depth-profiles measured with Auger electron spectroscopy. These measurements indicated that in impregnated samples containing non-framework cobalt there could be much more cobalt near the crystal surface than within the crystal. Because high cobalt concentration can lead to an invisible phosphorus, only nuclei deep within the crystal contribute to the NMR signal. In such a case, the effective concentration is simply the concentration of cobalt far from the crystal surface. In our case, two impregnated samples with different bulk cobalt concentrations exhibited equal relaxation rates. Previously, such a case was misinterpreted as a case, in which nuclear spin-lattice relaxation was independent of cobalt concentration. AES measurements, however, revealed, that although average concentrations of the two samples were different by a factor of two, their effective concentrations were equal and thus in complete agreement with observed relaxation rates.

Image-plate synchrotron laue data collection and subsequent structural analysis of a small test crystal of a nickel-containing aluminophosphate.

Image plates have advantages over photographic films, which include wider dynamic range, higher detector quantum efficiency, reduced exposure time and large size. In this study, an on-line image-plate system has been used to record crystallographic data from a small crystal. In particular, synchrotron Laue data were recorded with lambda(min) = 0.455, lambda(max) = 1.180 A, in 20 images 10 degrees apart and with an exposure time of 0.3 s each from a crystal (0.02 x 0.05 x 0.25 mm) of a nickel-containing aluminophosphate, NiAPO. The Laue data were analyzed with the Daresbury Laue software, including the application of an absorption correction. The structure was solved by a combination of the Patterson method and successive difference Fourier calculations using SHELXS86 and SHELXL93; the final R value for 1934 unique reflections (all data) and 310 parameters was 7.90%. The structure agrees with that determined by monochromatic diffractometry using the same crystal and reported by Helliwell, Gallois, Kariuki, Kaucic & Helliwell [Acta Cryst. (1993), B49, 420-428] with an r.m.s. deviation of 0.03 A. Hence, this study shows the image-plate device to be very effective for synchrotron data collection and subsequent structure analysis from small crystals, i.e. 0.02 x 0.05 x 0.25 mm, in chemical crystallography as well as providing further confirmation of the practicability of Laue data in structure solution and refinement.