Relationship of Pelvic Positional Change with Leg Length and Offset Measurement in Experimental Total Hip Arthroplasty.

OBJECTIVE: During total hip arthroplasty (THA), both pelvic and femur positions affect leg length (LL) and offset (OS) measurements because LL and OS calipers depend on the fixed reference points on the pelvis and femur, respectively. However, LL and OS measurement errors because of pelvic positional changes have not been described. This study aimed to clarify the effects of pelvic positional changes on LL and OS measurements in relation to the pelvic reference using a THA simulator. METHODS: We developed an experimental THA simulator using Sawbones models of the hemipelvis and femur that facilitated modification of the obliquity, tilt, and rotation of the pelvis. Using an LL and OS caliper, LL and OS measurement errors due to pelvic positional changes were determined with the femoral position fixed. Measurements were performed from two pelvic reference positions: the iliac tubercle (P1) and the top of the iliac crest intersecting the line of the femoral long axis (P2). RESULTS: Concerning pelvic obliquity, the total error of LL was 25.0 mm in P1 and 26.5 mm in P2, while the total error of OS was 13.0 mm in P1 and 10.9 mm in P2. For pelvic tilt, the total error of LL was 9.0 mm in P1 and 3.8 mm in P2, while the total error of OS was 0.5 mm in P1 and 1.0 mm in P2. Regarding pelvic rotation, the total error of LL was 13.8 mm in P1 and 3.2 mm in P2, while the total error of OS was 3.8 mm in P1 and 4.0 mm in P2. CONCLUSIONS: Pelvic positional changes alter LL and OS measurements. The acceptable range (error <2 mm) on LL and OS measurement errors of pelvic obliquity was only 2°, regardless of the pelvic reference position. The pelvic reference position should be at the top of the iliac crest intersecting the line of the long axis of the femur because of a small LL measurement error with pelvic tilt and rotation.

Effects of Magnetic Resonance Imaging With Axial Traction of the Thumb Carpometacarpal Joint on Articular Cartilage Visibility: A Feasibility Study.

Objectives The objective of this study was to verify the usefulness of magnetic resonance imaging (MRI) with axial traction of the thumb for observing articular cartilage. Materials and methods Eleven healthy adult volunteers (39.7 ± 7.4 years) without thumb carpometacarpal joint arthritis or trauma were included in this study. A 3-tesla (3T) MRI (Magnetom Skyra, Siemens Healthineers AG, Munich, Germany) of the right thumb with axial traction applied by a finger trap with three traction weights (0, 2, and 5 kg) was performed. A 3D T2* multiecho data imaging combination (MEDIC) was selected to visualize the articular cartilage. After multiplanar reconstruction, sagittal and coronal images of the thumb carpometacarpal joint were used to evaluate the articular cartilage visibility and joint space widths at five locations. Articular cartilage visibility was evaluated using our original classification method that used the percentage of the cartilage detectable area. The Friedman test was used to compare the differences between each traction weight and location. Results Articular cartilage visibility significantly improved with axial traction. The average joint space widths with the 5-kg application were 1.9 ± 0.8, 3.9 ± 0.6, 2.0 ± 0.9, 3.9 ± 1.1, and 2.5 ± 1.4 mm at the center, volar edge, dorsal edge, radial edge, and ulnar edge, respectively. The joint space widths significantly increased proportionally with the traction weight at all locations. The joint space widths at the volar and radial edges were significantly greater than those at other locations. Conclusion Applying axial traction to the thumb increased the joint space widths and improved the visibility of the articular cartilage in the carpometacarpal joint on MRI.

Relationship between Vertebral Instability and the Cross-Sectional Area of Lumbar Muscles in Postmenopausal Acute Osteoporotic Vertebral Fractures.

INTRODUCTION: Vertebral instability (VI) in osteoporotic vertebral fractures (OVFs) varies from mild to severe. The relationship between the VI of OVFs and independent factors, such as bone mineral density (BMD) and lumbar muscle volume, is unclear. This study aimed to investigate whether BMD and the cross-sectional area (CSA) of lumbar muscles are related to VI in OVFs. METHODS: On the basis of the thoracolumbar lateral radiographs of 95 acute OVFs in postmenopausal women (mean age 80.6 years; range: 64-103 years), supine and standing vertebral collapse rates (CRsp and CRst, respectively) were determined. Subsequently, VI was defined as follows: VI=CRst-CRsp. Using axial T2-weighted magnetic resonance imaging (MRI), CSA of the psoas major, erector spinae, and multifidus muscles at the L3/4 intervertebral disc level were measured. The BMD of the lumbar spine and proximal femur (total hip) was measured for all participants using dual-energy X-ray absorptiometry. The patients were classified into group 1 (VI <20%) and group 2 (VI ≥20%). RESULTS: We observed a negative correlation between VI and CSA of the erector spinae muscle (r=-0.3962, P<0.0001). No significant correlations were observed between VI and BMD. The CSA of the erector spinae muscle in group 2 was significantly lower than that in group 1 (P=0.0002). No significant difference in the BMD or the CSA of the psoas major or multifidus muscles was observed between the two groups. A multivariable analysis of factors of VI was performed. Both age (odds ratio [OR], 1.099; 95% confidence interval [CI], 1.015-1.189; P=0.020) and the CSA of the erector spinae (OR, 0.996; 95% CI, 0.993-0.999; P=0.020) were significant predictors of high VI. CONCLUSIONS: Although the severity of OVFs was related to the CSA of the erector spinae muscle, it was not associated with BMD.

Spontaneous rupture of the extensor pollicis longus tendon in systemic lupus erythematosus: A case report and literature review.

Spontaneous tendon rupture is a rare entity. Herein, we report a case of spontaneous rupture of the extensor pollicis longus (EPL) tendon in a 61-year-old woman with systemic lupus erythematosus (SLE). The patient worked as an aesthetician and had a 42-year history of SLE that was well controlled using oral steroids. She presented with an inability to extend her left thumb, with no prior history of trauma or symptoms. On imaging, there was no evidence of degenerative changes or osteophyte formation in the gliding area of the EPL tendon. Intraoperatively, there was evidence of tendon rupture around Lister's tubercle. We performed a tendon transfer of the extensor indicis proprius for repair. The patient recovered active thumb extension and returned to work 4 months after surgery without any complications. We suspected that spontaneous EPL tendon rupture was caused by a combination of disease-related factors, including long-term steroid use, chronic inflammation, and continuous mechanical stress from her work and daily activity. This case report demonstrates the multifactorial aetiology of spontaneous tendon rupture in patients with SLE and the importance of monitoring for this complication during routine follow-up.

Risk factors affecting vertebral collapse and kyphotic progression in postmenopausal osteoporotic vertebral fractures.

INTRODUCTION: We aimed to investigate the risk factors that affect vertebral deformity 6 months after osteoporotic vertebral fractures (OVFs) at the time of injury. MATERIALS AND METHODS: From May 2017 to May 2020, 70 postmenopausal women with OVFs were evaluated for age; body mass index; number of previous OVFs; total 25-hydroxy vitamin D [25(OH)D] levels; posterior wall injury on computed tomography; cross-sectional area (CSA) of the psoas major, erector spinae, and multifidus; fat infiltration; vertebral instability (VI) upon admission; collapse rate (CR); and kyphotic angle (KA) at 6 months after injury. A multiple regression analysis was conducted to identify the risk factors for the CR and KA. RESULTS: The CR was correlated with posterior wall injury (r = 0.295, p = 0.022), 25(OH)D levels (r = - 0.367, p = 0.002), and VI (r = 0.307, p = 0.010). In the multiple regression analysis, the 25(OH)D levels (p = 0.032) and VI (p = 0.035) were significant risk factors for the CR at the 6-month follow-up. The KA was correlated with the 25(OH)D levels (r = - 0.262, p = 0.031) and VI (r = 0.298, p = 0.012). In the multiple regression analysis, the CSA of the psoas major (p = 0.011) and VI (p < 0.001) were significant risk factors for the KA at the 6-month follow-up. CONCLUSION: In cases with large VI at the time of injury, the CR and KA were significantly higher at 6 months after injury. Moreover, the CR was affected by the 25(OH)D level, while the KA was affected by the CSA of the psoas major upon admission.

Effects of lower limb and pelvic pin positions on leg length and offset measurement errors in experimental total hip arthroplasty.

BACKGROUND: Leg length (LL) and offset (OS) are important factors in total hip arthroplasty (THA). Because most LL and OS callipers used in THA depend on fixed points on the pelvis and the femur, limb position could affect measurement error. This study was conducted on a THA simulator to clarify the effects of lower limb position and iliac pin position on LL and OS errors and to determine the permissible range of limb position for accurate LL and OS measurement. METHODS: An LL and OS measurement instrument was used. Two pin positions were tested: the iliac tubercle and the top of the iliac crest intersecting with the extension of the femoral axis. First, the limb was moved in one direction (flexion-extension, abduction-adduction, or internal-external rotation), and LL and OS were measured for each pin position. Next, the limb was moved in combinations of the three directions. Then, the permissible range of combined limb position, which resulted in LL and OS measurement error within ±2 mm, was determined for each pin position. RESULTS: Only 4° of abduction/adduction caused 5-7 mm error in LL and 2-4 mm error in OS, irrespective of pin position. The effects of flexion-extension and internal-external rotation on LL error were smaller for the top of the iliac crest than for the iliac tubercle, though OS error was similar for both pin positions. For LL, the permissible range of the combined limb position was wider for the top of the iliac crest than for the iliac tubercle. CONCLUSION: To minimize LL and OS measurement errors in THA, adduction-abduction must be maintained. The iliac pin position in the top of the iliac crest is preferred because it provides less LL measurement error and a wider permissible range of combined limb position for accurate LL measurement.

Effects of conservative treatment of 2-week rigorous bed rest on muscle disuse atrophy in osteoporotic vertebral fracture patients.

Objective: Osteoporotic vertebral fracture (OVF) is conventionally treated with conservative management such as bed rest, but a relatively prolonged bed rest has the potential risk of muscle disuse atrophy. This study aimed to examine whether the 2-week of rigorous bed rest affects muscle disuse atrophy in OVF patients. Patients and Methods: A total of 54 OVF patients (16 males; 38 females; mean age, 80.2 ± 9.2 years) were treated with an initial 2-week rigorous bed rest by hospitalization with persistent rehabilitation. Cognitive function, swallowing function, grip strength, and lower extremity circumference were evaluated at three-time points (admission, end of bed rest, and discharge). Results: Of the 51 patients who were able to walk independently before the injury, one patient (2.0%) had to use a wheelchair after the injury. During hospitalization, cognitive function decline was observed in 33.3% of patients, but not in patients with Revised Hasegawa's Dementia Scale score ≥25 at admission. Swallowing function decline was observed in one patient, and none of the patients developed aspiration pneumonia during hospitalization. The grip strength significantly improved both at the end of bed rest (P=0.04) and discharge (P=0.02). Although the lower extremity circumference significantly decreased at the end of bed rest (P<0.01), it was recovered afterward. The lower extremity circumference did not significantly differ between the admission and discharge (P=0.17). Conclusion: Our results suggested that conservative treatment of OVF through an initial 2-week rigorous bed rest with persistent hospital rehabilitation poses a low risk of muscle disuse atrophy. If cognitive dysfunction is observed on admission, close monitoring for exacerbation should be performed during the hospital stay.

Ten-year results of 55 dysplasia hips of hip offset and leg length reconstruction in total hip arthroplasty with cementless tapered stems having a high offset option designed for dysplastic femur.

PURPOSE: In developmental dysplasia of the hip (DDH), the centers of hip rotation move in the superior and lateral direction. In total hip arthroplasty for such cases, movement of the center of hip rotation is in the inferior and medial direction. It causes an increase in leg length and a decrease in acetabular offset. We therefore evaluated the change of hip offset and leg length before and after surgery with two stems having a high offset option. PATIENTS AND METHODS: The preoperative diagnosis was secondary osteoarthritis due to DDH excluded Crowe IV. A stem selection was decided based on preoperative two-dimensional templating. Total 55 hips in 50 patients were followed up for minimum 10 years. Pre- and postoperative clinical evaluations were performed using a hip joint function scoring system. Radiographic evaluations were used for offset and leg length measurements and other associated factors. RESULTS: Both stems showed excellent clinical results. A high offset option was used in 60% of all cases. No postoperative dislocations were observed. The biological fixation was stable in all cases. The hip offset was restored without excessive leg lengthening in most cases. CONCLUSION: Anatomical consistency could be maintained by using a stem which matched geometry of the proximal part and had offset option. These cementless tapered stems having a high offset option are suitable for Crowe I to III hip dysplasia if two-dimensional X-ray templates fit the shape of the proximal femurs. They were associated with excellent clinical results and biological fixation. The offset option may be useful to adjust leg length and offset in DDH patients.

The 21- to 27-year results of the Harris-Galante cementless total hip arthroplasty.

BACKGROUND: The Harris-Galante total hip arthroplasty (THA) is a first-generation cementless THA with a porous coating for biological fixation of the implant. Many studies report excellent long-term results for the acetabular cup, but few long-term studies exist for the femoral stem because of relatively poor short-term and midterm results. Here we present the 21- to 27-year results of the cup and the stem of the Harris-Galante THA. METHODS: From 1985 to 1991, 102 Harris-Galante THAs were inserted in 82 patients. At the time of the THA, the mean patient age was 54 years (range, 20-78 years). The primary diagnosis was secondary osteoarthritis due to developmental hip dysplasia (69 [68%] hips). The Japanese Orthopaedic Association (JOA) hip score and thigh pain were measures of clinical outcome. Radiographic review was performed retrospectively. Implant survival was evaluated by Kaplan-Meier analysis. RESULTS: Of 102 hips, 35 hips were from 31 deceased patients, 5 patients (6 hips) were lost to follow-up, 12 hips were revised, and 49 hips were from patients living at the latest follow-up. Among the living patients, 36 hips had a clinical evaluation and 42 hips had a radiograph obtained more than 21 years. The JOA hip score improved from 42 points preoperatively to 83.5 points at the latest follow-up. Thigh pain was reported in 13 hips. One cup and four stems were loose at the latest radiographic review. Most cup revisions were related to acetabular osteolysis. Fifteen hips showed severe stress shielding. Kaplan-Meier analysis of survivorship with any revision, acetabular reoperation, stem revision, and stem loosening as the end point was 87.0%, 90.3%, 95.7% and 86.4%, respectively, at 24.6 years. CONCLUSIONS: Long-term implant survival and clinical results of the Harris-Galante THA were good. Acetabular osteolysis-related cup loosening was a problem of the cup. Loosening, thigh pain, and stress shielding were problems of the stem.

Nontraumatic central fracture dislocation of the hip in a patient with chronic kidney disease and post gastrectomy.

OBJECTIVE: PATIENTs with secondary hyperparathyroidism caused by chronic kidney disease (CKD) develop secondary osteoporosis, which increases fracture risk. We report a case of insufficiency fractures complicated by secondary osteoporosis caused by chronic renal failure and gastrectomy. PATIENT: A 78-year-old man with a medical history of nephrotic syndrome and gastric cancer experienced an occult intertrochanteric fracture of his left femur after falling. RESULTS: Ten days after the first fracture, the patient was treated with hemodialysis for acute uremic symptoms. Eight weeks after this fracture, he sustained a right insufficiency acetabular fracture and was treated with total hip arthroplasty (THA). CONCLUSION: For patients with CKD, effective fracture prevention is difficult. THA with reconstruction of the acetabulum was an effective therapy in a patient with nontraumatic central fracture dislocation of the hip.

Follow-up results of 10-12 years after total hip arthroplasty using cementless tapered stem -- frequency of severe stress shielding with synergy stem in Japanese patients.

Synergy stems are tapered stems featuring a proximal porous coating, grid blasting below the proximal third to the distal end. This study included 41 patients (50 hips) who underwent total hip arthroplasty with follow-ups for 10 years or more. No stem reimplantations were performed. Spot welds were observed in the distal stem in Gruen zones 3 and 5 in 35 and 32 hips, respectively. First-degree stress shielding occurred in 8 hips; 2nd-degree, 20 hips; 3rd-degree, 13 hips; and 4th-degree, 9 hips. Because of bone fixation to the distal grit-blasted section of the stem, severe stress shielding was observed in nearly half of the cases. Multiple regression analysis of stress shielding determinants revealed a correlation between stem size and short patient height, showing the cause of stress shielding to be a mismatch in size between the stem and the femoral bone.

Osseointegration of porous titanium implants with and without electrochemically deposited DCPD coating in an ovine model.

BACKGROUND: Uncemented fixation of components in joint arthroplasty is achieved primarily through de novo bone formation at the bone-implant interface and establishment of a biological and mechanical interlock. In order to enhance bone-implant integration osteoconductive coatings and the methods of application thereof are continuously being developed and applied to highly porous and roughened implant substrates. In this study the effects of an electrochemically-deposited dicalcium phosphate dihydrate (DCPD) coating of a porous substrate on implant osseointegration was assessed using a standard uncemented implant fixation model in sheep. METHODS: Plasma sprayed titanium implants with and without a DCPD coating were inserted into defects drilled into the cancellous and cortical sites of the femur and tibia. Cancellous implants were inserted in a press-fit scenario whilst cortical implants were inserted in a line-to-line fit. Specimens were retrieved at 1, 2, 4, 8 and 12 weeks postoperatively. Interfacial shear-strength of the cortical sites was assessed using a push-out test, whilst bone ingrowth, ongrowth and remodelling were investigated using histologic and histomorphometric endpoints. RESULTS: DCPD coating significantly improved cancellous bone ingrowth at 4 weeks but had no significant effect on mechanical stability in cortical bone up to 12 weeks postoperatively. Whilst a significant reduction in cancellous bone ongrowth was observed from 4 to 12 weeks for the DCPD coating, no other statistically significant differences in ongrowth or ingrowth in either the cancellous or cortical sites were observed between TiPS and DCPD groups. CONCLUSION: The application of a DCPD coating to porous titanium substrates may improve the extent of cancellous bone ingrowth in the early postoperative phase following uncemented arthroplasty.

Midterm results of the Synergy cementless tapered stem: stress shielding and bone quality.

BACKGROUND: Tapered femoral stems have been shown to produce less thigh pain and stress shielding than other cement-less stem designs. The purpose of this study was to examine the performance of this type of femoral stem in Japanese patients. METHODS: A series of 40 total hip arthroplasties with a Synergy tapered femoral component were performed in 33 patients between March 1999 and February 2001 at our institution. Three hips (in three patients) were lost to follow-up, so 37 hips in 30 patients were followed for an average of 70 months. The patients' average age at the time of surgery was 59 years (range 43-80 years). Clinical evaluation included the Japanese Orthopaedic Association (JOA) Hip Score and the incidence of thigh pain. Preoperative radiographic examination included the cortical index and Dorr's bone type. Postoperative radiographic examination included evaluation of biological fixation, spot welds, cortical hypertrophy, and stress shielding. RESULTS: The average JOA Hip Score improved significantly from 35 preoperatively to 91 postoperatively. No patient suffered thigh pain. All femoral components were classified as bony stable. Spot welds and cortical hypertrophy were commonly found in the middle to the distal portion of the component. Severe (third and fourth degree) stress shielding was observed in 24.3% of the cases. A low cortical index, a Dorr type C femur, and a large stem size were associated with severe stress shielding. CONCLUSIONS: The midterm clinical results with the Synergy femoral component were satisfactory for Japanese patients. Although severe stress shielding was frequently observed in patients with poor bone quality, stem stability was not affected. Extent of grit blasting and stem length may be factors causing severe stress shielding in Japanese patients with poor bone quality. In conclusion, poor bone quality is a less favorable indication for the cementless tapered stem.

Grit-blasted and hydroxyapatite-coated total hip arthroplasty: an 11- to 14-year follow-up study.

We report long-term results of the first clinical trial of hydroxyapatite-coated total hip arthroplasty conducted in Japan. The hemispherical cup and the straight-tapered stem were made of titanium alloy with a grit-blasted, hydroxyapatite-coated surface. The surface roughness before and after hydroxyapatite coating was 1.4 microm and 3.4 microm, respectively. Thirty-three patients (35 hips) were followed prospectively; of these, 1 patient was lost to follow-up, 5 were deceased at the latest follow-up, and 27 were followed for 11 to 14 years. Two cups and one stem (two patients) were revised. Survivorship, with radiological acetabular loosening as the endpoint, was 62.3% at 14 years. At the latest radiological follow-up, stable fixation with bone ongrowth was achieved in 46% of the acetabular cups and 89% of the femoral stems. Acetabular cups with host bone coverage of less than 60% had a high rate of failure. The suboptimal result of the hydroxyapatite-coated smooth cup indicates that porous coatings under the hydroxyapatite coating would be beneficial for hydroxyapatite-coated total hip implants, especially for the acetabular components.

Resorbability and solubility of zinc-containing tricalcium phosphate.

Using zinc-containing tricalcium phosphate (ZnTCP) as the zinc carrier for zinc-releasing calcium phosphate ceramic implants promoted bone formation around the implants. Because no quantitative information was available on the equilibrium solubility and resorbability of ZnTCP, in vitro equilibrium solubility and in vivo resorbability of ZnTCP were determined and compared quantitatively in this study. The solubility of ZnTCP decreased with increasing zinc content. The negative logarithm of the solubility product (K(sp)) of ZnTCP was expressed as pK(sp) = 28.686 + 1.7414C - 0.42239C(2) + 0.063911C(3) - 0.0051037C(4) + 0.0001595C(5) in air, where C is the zinc content in ZnTCP (mol %). The solubility of ZnTCP containing a nontoxic level of zinc (<0.63 wt %) decreased to 52-92% of the solubility of pure tricalcium phosphate (TCP) in the pH range 5.0-7.4. However, the in vivo resorbed volume of ZnTCP containing the same amount of zinc was much lower than that expected from the in vitro solubility, becoming as low as 26-20% of that of TCP. Cellular resorption of TCP is substantially a process of dissolution in a fluid with an acidic pH that is maintained by the activities of cells. Therefore, the reduction of the resorbability of ZnTCP could be attributable principally to its lowered cellular activation property relative to that associated with pure TCP.