Patient initiated radiology requests: proof of wellness through images.

BACKGROUND: Traditionally, general practitioners (GPs) have initiated the need for, and ordered, radiological tests. With the emergence of consumer-centred care, patients have started to request scans from doctors on their own initiative. Consumeristic health care has shifted the patient-doctor dyadic relationship, with GPs trending towards accommodating patients' requests. METHODS: A mixed method analysis was conducted using a survey instrument with open ended questions and concurrent interviews to explore participants' responses from their requests for radiological studies from GPs. Themes emerging from both qualitative and quantitative methodologies were mapped onto the Andersen Newman Model (ANM). RESULTS: Data were analysed for 'predisposing,' 'need' and 'enabling' elements of the ANM model and were correspondingly mapped to patient's requests for radiological referrals according to the elements of the ANM. Participants expressed anxiety about their health, were confident in the types of radiological scans they desired and typically indicated the need for evidence of good health. Their desire for such requested scans was often enabled through prior exposure to health information and the experience of specific symptoms. Requests came with the expectation of validation, and if these requests were denied, participants indicated that they would seek another doctor who would oblige. CONCLUSIONS: In our modest study of Australian patients, participants were well informed about their health. Exposure to information seems to create a sense of anxiousness prior to visiting the doctor. Individuals sought visual proof of wellness through imaging, and doctors in return often accommodated patient requests for radiological studies to appease patients' needs and to maintain workflow.

Patients' requests for radiological imaging: A qualitative study on general practitioners' perspectives.

BACKGROUND: With the increasing availability of information, patients are becoming more informed about radiology procedures and requesting imaging studies. This qualitative study aims to explore factors that influence general practitioners' (GPs) decisions to fulfil patient requests for imaging studies during clinical consultation. METHODS: Semi-structured interviews were conducted with 10 GPs working across five private medical centres in Northwest Sydney. Conventional content analysis was used with emergent themes to identify GPs perspectives. RESULTS: Six themes stood out from the interviews with GPs fulfilling patient requests for imaging studies. They included four pertaining to patient factors: patient expectations, 'therapeutic scans', 'impressive labels' and entitled. Two further themes pertained to the GP perspective and included defensive medicine, and 'new patients'. Requests are fulfilled from anxious or health-obsessed patients, with GPs worrying about litigation if they refuse. However, GPs decline requests from patients with entitlement attitudes or during first visits. DISCUSSION: The findings suggest that GPs struggle to balance their responsibilities as gatekeepers of imaging with patients' expectations of request fulfilment. Clear guidelines on the appropriate use of diagnostic imaging and its limitations could help patients understand its proper use and ease anxiety. Additionally, education and training for GPs could help them manage patient expectations and provide appropriate care. PATIENT CONTRIBUTIONS: Patients, service users, caregivers, people with lived experiences or members of the public were not directly involved in the design, conduct, analysis or interpretation of the study. However, our study was conducted in primary care facilities where the GPs were interviewed about patients' requests for diagnostic imaging based on their own initiatives. GPs' perspectives in managing patient expectations and healthcare utilisation were explored within the Australian Medicare system, where medical imaging and image-guided procedures come at little to no cost to the individual. The study findings contribute to a better understanding of the challenges faced by GPs in dealing with patient consumerism and requests for diagnostic imaging, as well as factors influencing request fulfilment or denial. Insights gained from this study may inform future research about delivering patient-centred care within a similar context.

The potential advantages and workflow challenges of long axial field of view PET/CT.

Recently developed Long (≥100 cm) axial field of view (AFOV) PET/CT scanners are capable of producing images with higher signal-to-noise ratio, or performing faster whole-body acquisitions, or scanning with lower radiation dose to the patient, compared with conventional PET/CT scanners. These benefits, which arise due to their substantially higher, by more than an order of magnitude, geometric efficiency, have been well described in the recent literature. The introduction of Long AFOV PET/CT technology into the clinic also has important implications for the design and workflow of PET/CT facilities and their effects on radiation exposure to staff and patients. Maximising the considerable benefits of this technology requires a thorough understanding of the relationships between these factors to optimise workflows while appropriately managing radiation exposure. This article reviews current knowledge on PET/CT facility design, workflows and their effects on radiation exposure, identifies gaps in the literature and discusses the challenges that need to be considered with the introduction of Long AFOV PET/CT into the clinic.

Patient requests for radiological services: An Australian study of patient agency and the impact of online health information.

ISSUE ADDRESSED: The Internet has been instrumental in patients' knowledge about health and medicine through increasing consultation of online sources that advocate self-management. For example, those patients who request referrals from their doctors for tests and procedures in radiology. Such patient-initiated referral requests can devolutionise the traditional model of health care. This study aimed to understand individuals who sought online health information (OHI) and whether requests for radiological referrals were the result of OHI seeking. METHODS: The individuals targeted were those who have had a radiological procedure in the past 5 years. Using an online survey tool, individuals completed a 20-min anonymous survey. Included in the survey was a validated digital health literacy measurement scale, eHEALS. RESULTS: Those who scored higher on the eHEALS measure were likely to be under 55 years of age and were more inclined to request radiological referrals. Though they were not concerned with the credibility of sourced websites, most secured the desired outcome from their requests. CONCLUSION: Overall, this study indicates that patients are consulting online sites for health information, and individuals with higher digital literacy scores are asking doctors for referrals for radiological tests and procedures. These findings confirm our anecdotal experience in radiology departments. So what?: In conducting this study, we hope to better inform radiology and other health practitioners of the way OHI is impacting clinical practice.

Transition to Fast Whole-Body SPECT/CT Bone Imaging: An Assessment of Image Quality.

OBJECTIVE: To investigate the impact of reduced SPECT acquisition time on reconstructed image quality for diagnostic purposes. METHOD: Data from five patients referred for a routine bone SPECT/CT using the standard multi-bed SPECT/CT protocol were reviewed. The acquisition time was 900 s using gating technique; SPECT date was resampled into reduced data sets of 480 s, 450 s, 360 s and 180 s acquisition duration per bed position. Each acquisition time was reconstructed using a fixed number of subsets (8 subsets) and 4, 8, 12, and 16 iterations, followed by a post-reconstruction 3D Gaussian filter of 8 mm FWHM. Two Nuclear Medicine physicians analysed all images independently to score image quality, noise and diagnostic confidence based on a pre-defined 4-point scale. RESULTS: Our result showed that the most frequently selected categories for 480 s and 450 s images were good image quality, average noise and fair confidence, particularly at lower iteration numbers 4 and 8. For the shortened acquisition time of 360 s and 180 s, statistical significance was observed in most reconstructed images compared with 900 s. CONCLUSION: The SPECT/CT can significantly shorten the acquisition time with maintained image quality, noise and diagnostic confidence. Therefore, acquiring data over 480 s and 450 s is feasible for WB-SPECT/CT bone scans to provide an optimal balance between acquisition time and image quality.

Sensitivity of virtual non-contrast dual-energy CT urogram for detection of urinary calculi: a systematic review and meta-analysis.

OBJECTIVE: To determine the sensitivity of dual-energy (DE) virtual non-contrast computed tomography (vNCT), generated from the excretory phase of a CT urogram, compared to true non-contrast CT (tNCT) for the detection of urinary calculi. METHODS: A search of multiple medical literature databases was performed using predetermined search terms. Inclusion and exclusion criteria were applied, and bias risk was assessed by two independent reviewers using the quality assessment of diagnostic accuracy studies (QUADAS) tool. Collated estimates of sensitivity were generated, and sources of heterogeneity were identified and reviewed. RESULTS: Thirteen studies (1760 patients; 1740 urinary calculi) were included for sensitivity assessment. Pooled sensitivity for urinary calculi on vNCT was 78.1% (95% CI: 70.2 to 85.0%); however, heterogeneity between studies was very high (I2 = 92.0%). Sources of heterogeneity between studies were explored through subgroup analysis by categorising studies according to slice thickness (≥ 2 mm and < 2 mm), use of oral hydration, and use of intravenous furosemide. Pooled sensitivity for detection of urinary calculi on vNCT for studies that used oral hydration and < 2 mm slice thickness was 92.2% (95% CI: 89.5 to 94.5%). Pooled specificity was not performed as true negatives were not reported in most studies. Potential sources of bias were identified in included studies. CONCLUSION: vNCT demonstrated a moderate pooled sensitivity compared to tNCT for the detection of urinary calculi in split bolus CT urogram protocols. However, subgroup analysis suggests higher sensitivity when employing oral hydration and < 2 mm slice thickness or increment. KEY POINTS: • vNCT demonstrated moderate pooled sensitivity for the detection of urinary calculi in split bolus CT urogram protocols. • Subgroup analysis suggested higher sensitivity with oral hydration and < 2 mm slice thickness or increment.

Implementation of a Spatially-Variant and Tissue-Dependent Positron Range Correction for PET/CT Imaging.

Aim: To develop and evaluate a new approach for spatially variant and tissue-dependent positron range (PR) correction (PRC) during the iterative PET image reconstruction. Materials and Methods: The PR distributions of three radionuclides (18F, 68Ga, and 124I) were simulated using the GATE (GEANT4) framework in different material compositions (lung, water, and bone). For every radionuclide, the uniform PR kernel was created by mapping the simulated 3D PR point cloud to a 3D matrix with its size defined by the maximum PR in lung (18F) or water (68Ga and 124I) and the PET voxel size. The spatially variant kernels were composed from the uniform PR kernels by analyzing the material composition of the surrounding medium for each voxel before implementation as tissue-dependent, point-spread functions into the iterative image reconstruction. The proposed PRC method was evaluated using the NEMA image quality phantom (18F, 68Ga, and 124I); two unique PR phantoms were scanned and evaluated following OSEM reconstruction with and without PRC using different metrics, such as contrast recovery, contrast-to-noise ratio, image noise and the resolution evaluated in terms of full width at half maximum (FWHM). Results: The effect of PRC on 18F-imaging was negligible. In contrast, PRC improved image contrast for the 10-mm sphere of the NEMA image quality phantom filled with 68Ga and 124I by 33 and 24%, respectively. While the effect of PRC was less noticeable for the larger spheres, contrast recovery still improved by 5%. The spatial resolution was improved by 26% for 124I (FWHM of 4.9 vs. 3.7 mm). Conclusion: For high energy positron-emitting radionuclides, the proposed PRC method helped recover image contrast with reduced noise levels and with improved spatial resolution. As such, the PRC approach proposed here can help improve the quality of PET data in clinical practice and research.

Optimization of 99m Tc whole-body SPECT/CT image quality: A phantom study.

PURPOSE: Investigate the impact of acquisition time and reconstruction parameters on single-photon emission computed tomography/computed tomography (SPECT/CT) image quality with the ultimate aim of finding the shortest possible acquisition time for clinical whole-body SPECT/CT (WB-SPECT/CT) while maintaining image quality METHODS: The National Electrical Manufacturers Association (NEMA) image quality measurements were performed on a SPECT/CT imaging system using a NEMA International Electrotechnical Commission (IEC) phantom with spherical inserts of varying diameter (10-37 mm), filled with 99m Tc in activity sphere-to-background concentration ratio of 8.5:1. A gated acquisition was acquired and binned data were summed to simulate acquisitions of 15, 8, and 3 s per projection angle. Images were reconstructed on a Hermes (HERMES Medical Solutions AB, Stockholm, Sweden) workstation using eight subsets and between 4 and 24 iterations of the three-dimensional (3D) ordered subset expectation maximization (OSEM) algorithm. Reconstructed images were post-smoothed with 3D Gaussian filter ranging from 0 to 12 mm full-width at half maximum (FWHM). Contrast recovery, background variability, and contrast-to-noise ratio were evaluated RESULTS: As expected, the spheres were more clearly defined as acquisition time and count statistics improved. The optimal iteration number and Gaussian filter were determined from the contrast recovery convergence and level of noise. Convergence of contrast recovery was observed at eight iterations while 12 iterations yielded stabilized values at all acquisition times. In addition, it was observed that applying 3D Gaussian filter of 8-12 mm FWHM suppressed the noise and mitigated Gibbs artifacts. Background variability was larger for small spheres than larger spheres and the noise decreased when acquisition time became longer. A contrast-to-noise ratio >5 was reached for the two smallest spheres of 10 and 13 mm at acquisition times of 8 s CONCLUSION: Optimized reconstruction parameters preserved image quality with reduce acquisition time in present study. This study suggests an optimal protocol for clinical 99m Tc SPECT/CT can be reached at 8 s per projection angle, with data reconstructed using 12 iterations and eight subset of the 3D OSEM algorithm and 8 mm Gaussian post-filter.

Reducing Radiation Exposure to Paediatric Patients Undergoing [18F]FDG-PET/CT Imaging.

PURPOSE: To investigate the possibility of reducing the injected activity for whole-body [18F]FDG-PET/CT studies of paediatric oncology patients and to assess the usefulness of time-of-flight (TOF) acquisition on PET image quality at reduced count levels. PROCEDURES: Twenty-nine paediatric oncology patients (12F/17M, 3-18 years old (median age 13y), weight 45±20 kg, BMI 19±4 kg/m2), who underwent routine whole-body PET/CT examinations on a Siemens Biograph mCT TrueV system with TOF capability (555ps) were included in this study. The mean injected activity was 156 ± 45 MBq (3.8 ± 0.8 kg/MBq) and scaled to patient weight. The raw data was collected in listmode (LM) format and pre-processed to simulate reduced levels of [18F]FDG activity (75, 50, 35, 20 and 10% of the original counts) by randomly removing events from the original LM data. All data were reconstructed using the vendor-specific e7-tools with standard OSEM only, with OSEM plus resolution recovery (PSF). The reconstructions were repeated with added TOF (TOF) and PSF+TOF. The benefit of TOF together with the reduced count levels was evaluated by calculating the gains in signal-to-noise ratio (SNR) in the liver and contrast-to-noise ratio (CNR) in all PET-positive lesions before and after TOF employed at every simulated reduced count level. Finally, the PSF+TOF images at 50, 75 and 100% of counts were evaluated clinically on a 5-point scale by three nuclear medicine physicians. RESULTS: The visual inspection of the reconstructed images did not reveal significant differences in image quality between 75 and 100% count levels for PSF+TOF. The improvements in SNR and CNR were the greatest for TOF reconstruction and PSF combined. Both SNR and CNR gains did increase linearly with the patients BMI for both OSEM only and PSF reconstruction. These benefits were observed until reducing the counts to 50 and 35% for SNR and CNR, respectively. CONCLUSIONS: The benefit of using TOF was noticeable when using 50% or greater of the counts when evaluating the CNR and SNR. For [18F]FDG-PET/CT, whole-body paediatric imaging the injected activity can be reduced to 75% of the original dose without compromising PET image quality.

Increasing iterative reconstruction strength at low tube voltage in coronary CT angiography protocols using 3D-printed and Catphan® 500 phantoms.

PURPOSE: The purpose of this study was to investigate the effect of increasing iterative reconstruction (IR) algorithm strength at different tube voltages in coronary computed tomography angiography (CCTA) protocols using a three-dimensional (3D)-printed and Catphan® 500 phantoms. METHODS: A 3D-printed cardiac insert and Catphan 500 phantoms were scanned using CCTA protocols at 120 and 100 kVp tube voltages. All CT acquisitions were reconstructed using filtered back projection (FBP) and Adaptive Statistical Iterative Reconstruction (ASIR) algorithm at 40% and 60% strengths. Image quality characteristics such as image noise, signal-noise ratio (SNR), contrast-noise ratio (CNR), high spatial resolution, and low contrast resolution were analyzed. RESULTS: There was no significant difference (P > 0.05) between 120 and 100 kVp measures for image noise for FBP vs ASIR 60% (16.6 ± 3.8 vs 16.7 ± 4.8), SNR of ASIR 40% vs ASIR 60% (27.3 ± 5.4 vs 26.4 ± 4.8), and CNR of FBP vs ASIR 40% (31.3 ± 3.9 vs 30.1 ± 4.3), respectively. Based on the Modulation Transfer Function (MTF) analysis, there was a minimal change of image quality for each tube voltage but increases when higher strengths of ASIR were used. The best measure of low contrast detectability was observed at ASIR 60% at 120 kVp. CONCLUSIONS: Changing the IR strength has yielded different image quality noise characteristics. In this study, the use of 100 kVp and ASIR 60% yielded comparable image quality noise characteristics to the standard CCTA protocols using 120 kVp of ASIR 40%. A combination of 3D-printed and Catphan® 500 phantoms could be used to perform CT dose optimization protocols.

Evaluation of an integrated 3D-printed phantom for coronary CT angiography using iterative reconstruction algorithm.

INTRODUCTION: 3D-printed imaging phantoms are now increasingly available and used for computed tomography (CT) dose optimisation study and image quality analysis. The aim of this study was to evaluate the integrated 3D-printed cardiac insert phantom when evaluating iterative reconstruction (IR) algorithm in coronary CT angiography (CCTA) protocols. METHODS: The 3D-printed cardiac insert phantom was positioned into a chest phantom and scanned with a 16-slice CT scanner. Acquisitions were performed with CCTA protocols using 120 kVp at four different tube currents, 300, 200, 100 and 50 mA (protocols A, B, C and D, respectively). The image data sets were reconstructed with a filtered back projection (FBP) and three different IR algorithm strengths. The image quality metrics of image noise, signal-noise ratio (SNR) and contrast-noise ratio (CNR) were calculated for each protocol. RESULTS: Decrease in dose levels has significantly increased the image noise, compared to FBP of protocol A (P < 0.001). As a result, the SNR and CNR were significantly decreased (P < 0.001). For FBP, the highest noise with poor SNR and CNR was protocol D with 19.0 ± 1.6 HU, 18.9 ± 2.5 and 25.1 ± 3.6, respectively. For IR algorithm, the highest strength (AIDR3Dstrong ) yielded the lowest noise with excellent SNR and CNR. CONCLUSIONS: The use of IR algorithm and increasing its strengths have reduced noise significantly and thus increased the SNR and CNR when compared to FBP. Therefore, this integrated 3D-printed phantom approach could be used for dose optimisation study and image quality analysis in CCTA protocols.

Imaging prior to radiotherapy impacts in-vitro survival.

BACKGROUND AND PURPOSE: Cone Beam Computed Tomography (CBCT) is routinely used in radiotherapy to identify the position of the target volume. The aim of this study was to determine whether the CBCT dose, when followed by the treatment, influences the therapeutic outcomes as determined by in-vitro clonogenic cell survival in a radiobiological experiment. MATERIALS AND METHODS: Human cell lines, four cancer and one normal, were exposed to a 6 MV photon beam, produced by a linear accelerator. For half of each sample, a prior imaging dose was delivered using the on-board CBCT. A sample size of n = 103 was used to achieve statistical power. RESULTS: The experimental group of cell lines exposed to CBCT imaging prior to treatment exhibited a reduction in mean cancer cell survival of ~17 times (p = 0.02) greater than predicted from the average dose response and equivalent to more than 5% of the therapeutic dose, compared to 11 times greater than predicted for normal cells (n.s.). CONCLUSION: The greater than predicted reduction in survival resulting from the additional CBCT dose is consistent with radiation-induced bystander effects.

Diagnostic reference levels for 18 F-FDG whole body PET/CT procedures: Results from a survey of 12 centres in Australia and New Zealand.

INTRODUCTION: The aim of this work is to report diagnostic reference levels (DRLs) for hybrid positron emission tomography and x-ray computed tomography (PET/CT) exams in Australia (AU) for Queensland (QLD) and Western Australia (WA) (AU QLD/WA) and New Zealand (NZ). METHODS: Two-structured booklets were designed to collect dose information, patient demographics, equipment details and acquisition protocols for fluoride-18 fluorodeoxyglucose (18 F-FDG) PET/CT procedures, and any additional diagnostic CT routinely performed as part of 18 F-FDG whole-body examination. The DRL was reported based on the 75th percentile and achievable dose for 18 F-FDG, CT dose index volume (CTDIvol ) and dose length product (DLP). The effective dose and total effective dose was reported for 18 F-FDG whole-body PET/CT examination. Also, the effective dose was reported separately for identified additional diagnostic CT. RESULTS: The findings of this study show that the current DRL for 18 F-FDG in AU QLD/WA and NZ was 333.75 MBq and 332.87 MBq, respectively. The reported AU QLD/WA CTDIvol and DLP associated with 18 F-FDG whole-body PET/CT examinations from vertex to thigh (VT) was 4.41 mGy and 474 mGy.cm. In NZ, the reported VT CTDIvol and DLP was 13.07 mGy and 1319.05 mGy.cm. The effective dose for 18 F-FDG and CT component was 5.6 mSv and 4.7 mSv for AU QLD/WA. For NZ, the effective dose was 5.7 mSv and 10.9 mSv for 18 F-FDG and CT component. The total effective dose delivered from the 18 F-FDG whole-body scan from the AU QLD/WA PET/CT centres (10.44 mSv) were lower than the radiation doses delivered from the NZ (16.65 mSv). CONCLUSIONS: The current DRLs were proposed for AU QLD/WA and NZ for 18 F-FDG whole-body PET/CT examinations. Variations existed in the current practice of AU QLD/WA and NZ PET/CT examinations. There is a need to optimize the radiation doses delivered from PET/CT examinations.

An Australian local diagnostic reference level for paediatric whole-body 18F-FDG PET/CT.

OBJECTIVE:: The aim of this study is to report a local diagnostic reference level (DRL) for paediatric whole-body (WB) fludeoxyglucose (18F-FDG) positron emission tomography (PET) CT examinations. METHODS:: The Australian Radiation Protection and Nuclear Safety Agency (ARPANSA) national DRL (NDRL) age category (0-4 years and 5-14 years), the International Commission on Radiological Protection age category (ICRP age) (<1, >1-5, >5-10, and >10-15 years), and European guideline weight category ( EG weight) (<5, 5-<15, 15-<30, 30-<50, and 50-<80 kg) were used to determine a local DRL for WB 18F FDG PET/CT studies. Two-structured questionnaires were designed to collect dose data, patient demographics, equipment details, and acquisition protocols for WB 18F-FDG PET/CT procedures. The local DRL was based on the median 18F-FDG administered activity (MBq), dose-length product (DLP), and the CT dose index volume (CTDIvol), values. The effective dose (E) was also calculated and reported. RESULTS:: The local DRLs for 18F-FDG administered activity, CTDIvol and DLP values based on ARPANSA age and ICRP age were increased from lower to higher age categories. For the EG weight category, the local DRL for 18F-FDG administered activity, CTDIvol and DLP values were increased from the low EG weight category to the high EG weight category. The mean administered activity in our study based on ICRP age category >1-5, >5-10, and >10-15 years is 79.97, 119.40, and 176.04 MBq, which is lower than the mean administered activity reported in the North American Consensus guideline published in 2010 (99, 166, and 286 MBq) and European Association of Nuclear Medicine and Dosage Card (version 1.5.2008) (120, 189, and 302 MBq). However, the mean administered activity in our study based on ICRP age category <1 year was 55 MBq compared to the EANM Dosage card (version 1.5.2008) (70 MBq) and the NACG 2010 (51 MBq). Our study shows that the finding for ICRP age category <1 year was similar to the NACG 2010 value. CONCLUSION:: The determined local DRL values for the radiation doses associated with WB 18F FDG PET/CT examinations are differed considerably between the ARPANSA and ICRP age category and EG weight category. Although, the determined 18F-FDG value for ICRP < 1 year is in good agreement with available publish data, it is preferable to optimise the 18F-FDG administered activity while preserving the diagnostic image quality. ADVANCES IN KNOWLEDGE:: The local DRL value determined from WB 18F-FDG PET/CT examinations may help to establish the ARPANSA NDRL for WB FDG 18F-PET/CT examinations.

The associated factors for radiation dose variation in cardiac CT angiography.

OBJECTIVE:: This study aimed to examine the associated factors for dose variation and influence cardiac CT angiography (CCTA) dose benchmarks in current CT imaging centres. METHODS:: A questionnaire was distributed to CT centres across Australia and Saudi Arabia. All participating centres collected data for adults who underwent a CCTA procedure. The questionnaire gathered information about the examination protocol, scanning parameters, patient parameters, and volume CT dose index (CTDI vol) and dose-length product (DLP). A stepwise regression analysis was performed to assess the contribution of tube voltage (kV), padding time technique, cross-sectional area (CSA) of chest and weight to DLP. RESULTS:: A total of 17 CT centres provided data for 423 CCTA examinations. The median CTDIvol, DLP and effective dose were 18 mGy, 256 mGy.cm and 5.2 mSv respectively. There was a statistically significant difference in DLP between retrospective and prospective ECG-gating modes (p = 0.001). Median DLP from CCTA using padding technique was 61% higher than CCTA without padding (p = 0.001). The stepwise regression showed that kV was the most significant predictor of DLP followed by padding technique then CSA while patient weight did not statistically significantly predict DLP. Correlation analysis showed a strong positive correlation between weight and CSA (r = 0.78), and there was a moderate positive correlation between weight and DLP (r = 0.42), as well as CSA and DLP (r = 0.48). CONCLUSION:: Findings show radiation dose variations for CCTA. The associated factors for dose variation found in this study are scanning mode, kV, padding time technique and CSA of the chest. This results support the need to include CSA measurements in future dose survey and for setting DRLs. ADVANCES IN KNOWLEDGE:: The study provides baseline information that helps to understand the associated factors for dose variations and high doses within and between centres performing CCTA.

Determining and updating PET/CT and SPECT/CT diagnostic reference levels: A systematic review.

The aim of this systematic review is to investigate the national diagnostic reference level (NDRL) methods for positron emission tomography/computed tomography (PET/CT) and single photon emission tomography/computed tomography (SPECT/CT) procedures. A search strategy was based on the preferred, reporting items for systematic review and meta-analysis (PRISMA). Relevant articles retrieved from Medline, Scopus, Web of Science, Embase, Cinahl, and Google Scholar published up to October 2017. The search yielded 1057 articles. Fourteen articles were included in the review after a screening process. Relevant information from the selected articles were summarised and analysed. Discrepancies were found between the methodologies utilised to establish and report both PET/CT and SPECT/CT NDRLs, e.g. patient sampling and administered activity. Further research should focus on reporting more NDRLs for hybrid PET/CT and SPECT/CT examinations, and establish a robust NDRL standard for the CT portion associated with PET/CT and SPECT/CT examinations. This review provides updated NDRL reommndations to deliver more comparable international radation doses for administered activity and CT dose across PET/CT and SPECT/CT clinics.

DIAGNOSTIC REFERENCE LEVELS FOR CARDIAC CT ANGIOGRAPHY IN AUSTRALIA.

This study aims to assess patient radiation dose from cardiac computed tomography angiography (CCTA) with the aim of proposing a national diagnostic reference levels (NDRLs) for CCTA procedures in Australia. A questionnaire was used to retrospectively gather baseline information related to CCTA scanning and patient parameters in CT centres across the country. The 75th percentile of both volumetric CT dose index (CTDIvol) and dose length-product (DLP) was used as DRL values for CCTA. A DRL for CT calcium scoring test was also determined. NDRLs were compared with international published data. Data sets of 338 patients from nine CT centres were used for analysis. The CCTA DRL for the CTDIvol and the DLP were 22 mGy and 268 mGy cm, respectively. The CT calcium scoring test DRL for DLP was 137 mGy cm. The DRL values for CCTA in Australia have been recommended for the first time. DRLs are lower than those in most published studies due to the implementation of dose-saving technologies such as prospective ECG-gated mode and iterative reconstruction algorithms. Considerable variations remain in patient doses between hospitals for the most frequently used CCTA protocols, indicating the potential for DRLs to prompt dose optimisation strategies in CT facilities.

Development of an organ-specific insert phantom generated using a 3D printer for investigations of cardiac computed tomography protocols.

INTRODUCTION: An ideal organ-specific insert phantom should be able to simulate the anatomical features with appropriate appearances in the resultant computed tomography (CT) images. This study investigated a 3D printing technology to develop a novel and cost-effective cardiac insert phantom derived from volumetric CT image datasets of anthropomorphic chest phantom. METHODS: Cardiac insert volumes were segmented from CT image datasets, derived from an anthropomorphic chest phantom of Lungman N-01 (Kyoto Kagaku, Japan). These segmented datasets were converted to a virtual 3D-isosurface of heart-shaped shell, while two other removable inserts were included using computer-aided design (CAD) software program. This newly designed cardiac insert phantom was later printed by using a fused deposition modelling (FDM) process via a Creatbot DM Plus 3D printer. Then, several selected filling materials, such as contrast media, oil, water and jelly, were loaded into designated spaces in the 3D-printed phantom. The 3D-printed cardiac insert phantom was positioned within the anthropomorphic chest phantom and 30 repeated CT acquisitions performed using a multi-detector scanner at 120-kVp tube potential. Attenuation (Hounsfield Unit, HU) values were measured and compared to the image datasets of real-patient and Catphan® 500 phantom. RESULTS: The output of the 3D-printed cardiac insert phantom was a solid acrylic plastic material, which was strong, light in weight and cost-effective. HU values of the filling materials were comparable to the image datasets of real-patient and Catphan® 500 phantom. CONCLUSIONS: A novel and cost-effective cardiac insert phantom for anthropomorphic chest phantom was developed using volumetric CT image datasets with a 3D printer. Hence, this suggested the printing methodology could be applied to generate other phantoms for CT imaging studies.

Respiratory Motion Compensation for PET/CT with Motion Information Derived from Matched Attenuation-Corrected Gated PET Data.

Respiratory motion degrades the detection and quantification capabilities of PET/CT imaging. Moreover, mismatch between a fast helical CT image and a time-averaged PET image due to respiratory motion results in additional attenuation correction artifacts and inaccurate localization. Current motion compensation approaches typically have 3 limitations: the mismatch among respiration-gated PET images and the CT attenuation correction (CTAC) map can introduce artifacts in the gated PET reconstructions that can subsequently affect the accuracy of the motion estimation; sinogram-based correction approaches do not correct for intragate motion due to intracycle and intercycle breathing variations; and the mismatch between the PET motion compensation reference gate and the CT image can cause an additional CT-mismatch artifact. In this study, we established a motion correction framework to address these limitations. Methods: In the proposed framework, the combined emission-transmission reconstruction algorithm was used for phase-matched gated PET reconstructions to facilitate the motion model building. An event-by-event nonrigid respiratory motion compensation method with correlations between internal organ motion and external respiratory signals was used to correct both intracycle and intercycle breathing variations. The PET reference gate was automatically determined by a newly proposed CT-matching algorithm. We applied the new framework to 13 human datasets with 3 different radiotracers and 323 lesions and compared its performance with CTAC and non-attenuation correction (NAC) approaches. Validation using 4-dimensional CT was performed for one lung cancer dataset. Results: For the 10 18F-FDG studies, the proposed method outperformed (P < 0.006) both the CTAC and the NAC methods in terms of region-of-interest-based SUVmean, SUVmax, and SUV ratio improvements over no motion correction (SUVmean: 19.9% vs. 14.0% vs. 13.2%; SUVmax: 15.5% vs. 10.8% vs. 10.6%; SUV ratio: 24.1% vs. 17.6% vs. 16.2%, for the proposed, CTAC, and NAC methods, respectively). The proposed method increased SUV ratios over no motion correction for 94.4% of lesions, compared with 84.8% and 86.4% using the CTAC and NAC methods, respectively. For the 2 18F-fluoropropyl-(+)-dihydrotetrabenazine studies, the proposed method reduced the CT-mismatch artifacts in the lower lung where the CTAC approach failed and maintained the quantification accuracy of bone marrow where the NAC approach failed. For the 18F-FMISO study, the proposed method outperformed both the CTAC and the NAC methods in terms of motion estimation accuracy at 2 lung lesion locations. Conclusion: The proposed PET/CT respiratory event-by-event motion-correction framework with motion information derived from matched attenuation-corrected PET data provides image quality superior to that of the CTAC and NAC methods for multiple tracers.

Integrating mammographic breast density in glandular dose calculation.

OBJECTIVE: This work proposes the use of mammographic breast density (MBD) to estimate actual glandular dose (AGD), and assesses how AGD compares to mean glandular dose (MGD) estimated using Dance et al method. METHODS: A retrospective sample of anonymised mammograms (52,405) was retrieved from a central database. Technical parameters and patient characteristics were exported from the Digital Imaging and Communication in Medicine (DICOM) header using third party software. LIBRA (Laboratory for Individualized Breast Radiodensity Assessment) software package (University of Pennsylvania, Philadelphia, USA) was used to estimate MBDs for each mammogram included in the data set. MGD was estimated using Dance et al method, while AGD was calculated by replacing Dance et al standard glandularities with LIBRA estimated MBDs. A linear regression analysis was used to assess the association between MGD and AGD, and a Bland-Altman analysis was performed to assess their mean difference. RESULTS: The final data set included 31,097 mammograms from 7728 females. MGD, AGD, and MBD medians were 1.53 , 1.62 mGy and 8% respectively. When stratified per breast thickness ranges, median MBDs were lower than Dance's standard glandularities. There was a strong positive correlation (R2 = 0.987, p < 0.0001) between MGD and AGD although the Bland-Altman analysis revealed a small statistically significant bias of 0.087 mGy between MGD and AGD (p < 0.001). CONCLUSION: AGD estimated from MBD is highly correlated to MGD from Dance method, albeit the Dance method underestimates dose at smaller CBTs. Advances in knowledge: Our work should provide a stepping-stone towards an individualised dose estimation using automated clinical measures of MBD.