RESUMO
Metal alloys like stainless steel, titanium, and cobalt-chromium alloys are preferable for bio-implants due to their exceptional strength, tribological properties, and biocompatibility. However, long-term implantation of metal alloys can lead to inflammation, swelling, and itching because of ion leaching. To address this issue, polymers are increasingly being utilized in orthopedic applications, replacing metallic components such as bone fixation plates, screws, and scaffolds, as well as minimizing metal-on-metal contact in total hip and knee joint replacements. Ceramics, known for their hardness, thermal barrier, wear, and corrosion resistance, find extensive application in electrochemical, fuel, and biomedical industries. This review delves into a variety of biocompatible materials engineered to seamlessly integrate with the body, reducing adverse reactions like inflammation, toxicity, or immune responses. Additionally, this review examines the potential of various biomaterials including metals, polymers, and ceramics for implant applications. While metallic biomaterials remain indispensable, polymers and ceramics show promise as alternative options. However, surface-modified metallic materials offer a hybrid effect, combining the strengths of different constituents. The future of biomedical implant materials lies in advanced fabrication techniques and personalized designs, facilitating tailored solutions for complex medical needs.
RESUMO
Carbon footprint reduction, recompense depletion of natural resources, as well as waste recycling are nowadays focused research directions to achieve sustainability without compromising the concrete strength parameters. Therefore, the purpose of the present study is to utilize different dosages of marble waste aggregates (MWA) and stone dust (SD) as a replacement for coarse and fine aggregate, respectively. The MWA with 10 to 30% coarse aggregate replacement and SD with 40 to 50% fine aggregate replacement were used to evaluate the physical properties (workability and absorption), durability (acid attack resistance), and strength properties (compressive, flexural, and tensile strength) of concrete. Moreover, statistical modeling was also performed using response surface methodology (RSM) to design the experiment, optimize the MWA and SD dosages, and finally validate the experimental results. Increasing MWA substitutions resulted in higher workability, lower absorption, and lower resistance to acid attack as compared with controlled concrete. However, reduced compressive strength, flexural strength, and tensile strength at 7-day and 28-day cured specimens were observed as compared to the controlled specimen. On the other hand, increasing SD content causes a reduction in workability, higher absorption, and lower resistance to acid attack compared with controlled concrete. Similarly, 7-day and 28-day compressive strength, flexural strength, and tensile strength of SD-substituted concrete showed improvement up to 50% replacement and a slight reduction at 60% replacement. However, the strength of SD substituted concrete is higher than controlled concrete. Quadratic models were suggested based on a higher coefficient of determination (R2) for all responses. Quadratic RSM models yielded R2 equaling 0.90 and 0.94 for compressive strength at 7 days and 28 days, respectively. Similarly, 0.94 and 0.96 for 7-day and 28-day flexural strength and 0.89 for tensile strength. The optimization performed through RSM indicates that 15% MWA and 50% SD yielded higher strength compared to all other mixtures. The predicted optimized data was validated experimentally with an error of less than 5%.
RESUMO
Currently, recycling of waste materials in construction is being considered very important because waste generation is posing serious threats to our living environment. Hence, to induce sustainability in the ongoing urban development, researchers around the globe are using numerous wastes in concrete as partial substitutes of binders (cement, lime, etc.) and fillers (fine and coarse aggregates) with the aim of reducing the depletion of natural resources and cutting the carbon dioxide emissions emerging from increased demand and production of cement. This review paper has summarized the findings of literature relating to recycling of marble wastes and ceramic tiles wastes in production of concrete. The physical, fresh-state, and strength properties of concrete were reviewed from available extensive literature, and it was found that the concrete prepared from marble waste and ceramic waste as partial substitution of cement and aggregates is expected to perform at least comparable to conventional cement concrete and better if applicable. Both marble wastes and ceramic tiles wastes can be incorporated and recycled in concrete as cementitious materials and aggregate replacing materials. With such approach, the concrete can be made strong and durable, and the issues relating to depletion of natural resources and environmental degradation can also be solved without compromising sustainability in infrastructure development.
Assuntos
Gerenciamento de Resíduos , Carbonato de Cálcio , Cerâmica , Materiais de Construção , Resíduos Industriais/análise , ReciclagemRESUMO
Globally, concrete is widely implemented as a construction material and is progressively being utilized because of growth in urbanization. However, limited resources and gradual depravity of the environment are forcing the research community to obtain alternative materials from large amounts of agro-industrial wastes as a partial replacement for ordinary cement. Cement is a main binding resource in concrete production. To reduce environmental problems associated with waste, this study considered the recycling of agro-industrial wastes, such as sugarcane bagasse ash (SCBA), rice husk ash (RHA), and others, into cement, and to finally bring sustainable and environmental-friendly concrete. This study considered 5%, 10%, and 15% of SBCA and RHA individually to replace ordinary Portland cement (OPC) by weight method then combined both ashes as 10%, 20%, and 30% to replace OPC to produce sustainable concrete. It was experimentally declared that the strength performance of concrete was reduced while utilizing SCBA and RHA individually and combined as supplementary cementitious material (SCM) at 7, 28, 56, and 90 days, respectively. Moreover, the initial and final setting time is increased as the quantity of replacement level of OPC with SCBA and RHA separates and together as SCM in the mixture. Based on experimental findings, it was concluded that the use of 5% of SCBA and 5% of RHA as cement replacement material individually or combined in concrete could provide appropriate results for structural applications in concrete.
Assuntos
Oryza , Saccharum , Celulose , Cinza de Carvão , Materiais de ConstruçãoRESUMO
In recent years, the research direction is shifted toward introducing new supplementary cementitious materials (SCM) in lieu of in place of Portland cement (PC) in concrete as its production emits a lot of toxic gases in the atmosphere which causes environmental pollution and greenhouse gases. SCM such as sugarcane bagasse ash (SCBA), metakaolin (MK), and millet husk ash (MHA) are available in abundant quantities and considered as waste products. The primary aim of this experimental study is to investigate the effect of SCBA, MK, and MHA on the fresh and mechanical properties of concrete mixed which contributes to sustainable development. A total of 228 concrete specimens were prepared with targeted strength of 25MPa at 0.52 water-cement ratio and cured at 28 days. It is found that the compressive strength and split tensile strength were enhanced by 17% and 14.28%, respectively, at SCBA4MK4MHA4 (88% PC, 4% SCBA, 4% MK, and 4% MHA) as ternary cementitious material (TCM) in concrete after 28 days. Moreover, the permeability and density of concrete are found to be reduced when SCBA, MK, and MHA are used separately and combined as TCM increases in concrete at 28 days, respectively. The results showed that the workability of the fresh concrete was decreased with the increase of the percentage of SCBA, MK, and MHA separately and together as TCM in concrete.
Assuntos
Saccharum , Carbono , Celulose , Cinza de Carvão , Materiais de Construção , MilhetesRESUMO
Roads play a pivotal role in the overall economic growth of any country. Developed countries allocated sufficient budget to make new roads and to maintain the existing roads. They also have a proper pavement management system (PMS) in practice to manage roads, whereas developing countries suffer from budgetary issues to make new roads and maintain the existing road network. Therefore, this paper explores the awareness of PMS via direct and indirect methods in Pakistan with a proposed framework of the low-cost model and pavement maintenance indicators for developing countries. This paper also performs a scientometric assessment of PMS. A detailed literature review has been carried out for this study, followed by a quantitative study from experienced professionals. The scientometric data is collected from the Scopus database from 1975 to 2020, whereas the data for PMS awareness assessment has been collected using questionnaires from different experts working directly and indirectly in the road management sector. The data has been analyzed using the arithmetic mean because of the nature of the questions and scope of the study. The direct method results show that experts are aware of PMS for a new road, but they have no PMS to rehabilitate roads. The indirect method results show that the authorities are applying various components of PMS, but there is no proper PMS in practice. This paper helps decision-makers to make better decisions and policies for improved road maintenance and rehabilitation. The proposed framework in the study can significantly assist the UN-SDG 9 (Facilitate Sustainable Infrastructure in Developing Countries) and 11 (Affordable and Sustainable Transport System).
Assuntos
Desenvolvimento Econômico , PaquistãoRESUMO
The increasing issue of global warming has received tremendous attention from researchers around the world as researchers are actively publishing their findings related to environmental issues such as greenhouse gas emissions, carbon footprint, and air quality. In this bibliometric review, Scopus database was accessed to retrieve publications from 1971 to 2021, related to carbon footprint of buildings which is significantly associated with global warming and air quality. The results suggested that 41% of publications were published in close access journals requiring nominal subscription fee and/or institutional permissions for access to articles. Only 1% of publications were in press for publication, while 99% of them were online available. The trend of publications on carbon footprint has increased after 2002 and is also increasing in recent years as the topic is widely studied in many fields such as environmental sciences, engineering, materials sciences, earth and planetary sciences, chemical engineering, and energy. Approximately 97% publications were peer-reviewed journal articles. The authors, i.e., Aresta, M., Lin, T.P., and Persily, A.K., published highest number of publications among all on topic of carbon footprint. However, other authors, i.e., Cai, W., Chen, Z., Ma, M. Paik, I., and Pomponi, F., have published two publications each on carbon footprint of buildings. The funding for research on carbon footprint of buildings is mainly received from the National Institute of Standards and Technology, Lawrence Berkeley National Laboratory, and Tianjin University. However, the National Taiwan University, George Mason University, and Universita degi Studi di Bari hold 3% share in total number of publications on carbon footprint of buildings. As China and the USA are countries with highest share in global carbon footprint, both countries also have highest contribution in research on carbon footprint, followed by South Korea, the UK, Japan, Italy, Germany, Taiwan, etc. The study also concluded that, due to its wider readability and understanding, most of the publications were in the English language.
Assuntos
Bibliometria , Pegada de Carbono , China , Bases de Dados Factuais , Humanos , TecnologiaRESUMO
This study investigated the influence of coal bottom ash (CBA) on the concrete properties and evaluate the effects of combined exposure of sulphate and chloride conditions on the concrete containing CBA. During concrete mixing, cement was replaced with CBA by 10% of cement weight. Initially, concrete samples were kept in normal water for 28 days. Next, the specimens were moved to a combined solution of 5% sodium sulphate (Na2SO4) and 5% sodium chloride (NaCl) solution for a further 28 to 180 days. The experimental findings demonstrated that the concrete containing 10% CBA (M2) gives 12% higher compressive strength than the water cured normal concrete (M1). However, when it was exposed to a solution of 5% Na2SO4 and 5% NaCl, gives 0.2% greater compressive strength with reference to M1. The presence of 10% CBA decreases the chloride penetration and drying shrinkage around 33.6% and 29.2% respectively at 180 days. Hence, this study declared 10% CBA as optimum that can be used for future research.