Measurement and theory of hydrogen bonding contribution to isosteric DNA base pairs.

We address the recent debate surrounding the ability of 2,4-difluorotoluene (F), a low-polarity mimic of thymine (T), to form a hydrogen-bonded complex with adenine in DNA. The hydrogen bonding ability of F has been characterized as small to zero in various experimental studies, and moderate to small in computational studies. However, recent X-ray crystallographic studies of difluorotoluene in DNA/RNA have indicated, based on interatomic distances, possible hydrogen bonding interactions between F and natural bases in nucleic acid duplexes and in a DNA polymerase active site. Since F is widely used to measure electrostatic contributions to pairing and replication, it is important to quantify the impact of this isostere on DNA stability. Here, we studied the pairing stability and selectivity of this compound and a closely related variant, dichlorotoluene deoxyriboside (L), in DNA, using both experimental and computational approaches. We measured the thermodynamics of duplex formation in three sequence contexts and with all possible pairing partners by thermal melting studies using the van't Hoff approach, and for selected cases by isothermal titration calorimetry (ITC). Experimental results showed that internal F-A pairing in DNA is destabilizing by 3.8 kcal/mol (van't Hoff, 37 °C) as compared with T-A pairing. At the end of a duplex, base-base interactions are considerably smaller; however, the net F-A interaction remains repulsive while T-A pairing is attractive. As for selectivity, F is found to be slightly selective for adenine over C, G, T by 0.5 kcal mol, as compared with thymine's selectivity of 2.4 kcal/mol. Interestingly, dichlorotoluene in DNA is slightly less destabilizing and slightly more selective than F, despite the lack of strongly electronegative fluorine atoms. Experimental data were complemented by computational results, evaluated at the M06-2X/6-31+G(d) and MP2/cc-pVTZ levels of theory. These computations suggest that the pairing energy of F to A is ~28% of that of T-A, and most of this interaction does not arise from the F···HN interaction, but rather from the CH···N interaction. The nucleobase analogue shows no inherent selectivity for adenine over other bases, and L-A pairing energies are slightly weaker than for F-A. Overall, the results are consistent with a small favorable noncovalent interaction of F with A offset by a large desolvation cost for the polar partner. We discuss the findings in light of recent structural studies and of DNA replication experiments involving these analogues.

Chemistry of nucleic acids: impacts in multiple fields.

Research in nucleic acids has made major advances in the past decade in multiple fields of science and technology. Here we discuss some of the most important findings in DNA and RNA research in the fields of biology, chemistry, biotechnology, synthetic biology, nanostructures and optical materials, with emphasis on how chemistry has impacted, and is impacted by, these developments. Major challenges ahead include the development of new chemical strategies that allow synthetically modified nucleic acids to enter into, and function in, living systems.

X-ray crystallographic structure of an artificial beta-sheet dimer.

This paper describes the X-ray crystallographic structure of a designed cyclic beta-sheet peptide that forms a well-defined hydrogen-bonded dimer that mimics beta-sheet dimers formed by proteins. The 54-membered ring macrocyclic peptide (1a) contains molecular template and turn units that induce beta-sheet structure in a heptapeptide strand that forms the dimerization interface. The X-ray crystallographic structure reveals the structures of the two "Hao" amino acids that help template the beta-sheet structure and the two delta-linked ornithine turn units that link the Hao-containing template to the heptapeptide beta-strand. The Hao amino acids adopt a conformation that resembles a tripeptide in a beta-strand conformation, with one edge of the Hao unit presenting an alternating array of hydrogen-bond donor and acceptor groups in the same pattern as that of a tripeptide beta-strand. The delta-linked ornithines adopt a conformation that resembles a hydrogen-bonded beta-turn, in which the ornithine takes the place of the i+1 and i+2 residues. The dimers formed by macrocyclic beta-sheet 1a resemble the dimers of many proteins, such as defensin HNP-3, the lambda-Cro repressor, interleukin 8, and the ribonuclease H domain of HIV-1 reverse transcriptase. The dimers of 1a self-assemble in the solid state into a barrel-shaped trimer of dimers in which the three dimers are arranged in a triangular fashion. Molecular modeling in which one of the three dimers is removed and the remaining two dimers are aligned face-to-face provides a model of the dimers of dimers of closely related macrocyclic beta-sheet peptides that were observed in solution.

Use of disulfide "staples" to stabilize beta-sheet quaternary structure.

This Letter reports the use of disulfide linkages to stabilize a beta-sheet dimer with a well-defined structure in aqueous and dimethyl sulfoxide solutions. In this dimer, two cyclic beta-sheet peptides are connected by disulfide linkages at the non-hydrogen-bonded rings. The cyclic beta-sheet "domains" interact through hydrogen bonding to form a four-stranded beta-sheet structure. This interaction results in enhanced folding of the cyclic beta-sheet peptides.

Functionalized analogues of an unnatural amino acid that mimics a tripeptide beta-strand.

This paper introduces polar and hydrophobic variants of the unnatural amino acid Hao, which mimics the hydrogen-bonding functionality of one edge of a beta-strand. In these variants, the methyl side chain of Hao is replaced with acidic, basic, and hydrophobic groups. These modifications can impart improved solubility and additional side-chain interactions to peptides containing Hao.

Artificial beta-sheets: chemical models of beta-sheets.

Chemical models provide tools with which to simplify and study complicated biological systems. Forces and chemical processes that govern the structure, function, and interactions of a biomacromolecule can be explored with a simple, easy-to-study synthetic molecule. Chemical models of beta-sheet structures have helped to elucidate the factors influencing protein structures and functions. Chemical models that mimic beta-sheet quaternary structure and interactions are emerging as valuable tools with which to better understand and control protein recognition and protein aggregation.

Macrocyclic beta-sheet peptides that mimic protein quaternary structure through intermolecular beta-sheet interactions.

This paper reports the design, synthesis, and characterization of a family of cyclic peptides that mimic protein quaternary structure through beta-sheet interactions. These peptides are 54-membered-ring macrocycles comprising an extended heptapeptide beta-strand, two Hao beta-strand mimics [JACS 2000, 122, 7654] joined by one additional alpha-amino acid, and two delta-linked ornithine beta-turn mimics [JACS 2003, 125, 876]. Peptide 3a, as the representative of these cyclic peptides, contains a heptapeptide sequence (TSFTYTS) adapted from the dimerization interface of protein NuG2 [PDB ID: 1mio]. 1H NMR studies of aqueous solutions of peptide 3a show a partially folded monomer in slow exchange with a strongly folded oligomer. NOE studies clearly show that the peptide self-associates through edge-to-edge beta-sheet dimerization. Pulsed-field gradient (PFG) NMR diffusion coefficient measurements and analytical ultracentrifugation (AUC) studies establish that the oligomer is a tetramer. Collectively, these experiments suggest a model in which cyclic peptide 3a oligomerizes to form a dimer of beta-sheet dimers. In this tetrameric beta-sheet sandwich, the macrocyclic peptide 3a is folded to form a beta-sheet, the beta-sheet is dimerized through edge-to-edge interactions, and this dimer is further dimerized through hydrophobic face-to-face interactions involving the Phe and Tyr groups. Further studies of peptides 3b-3n, which are homologues of peptide 3a with 1-6 variations in the heptapeptide sequence, elucidate the importance of the heptapeptide sequence in the folding and oligomerization of this family of cyclic peptides. Studies of peptides 3b-3g show that aromatic residues across from Hao improve folding of the peptide, while studies of peptides 3h-3n indicate that hydrophobic residues at positions R3 and R5 of the heptapeptide sequence are important in oligomerization.

Cyclic modular beta-sheets.

The development of peptide beta-hairpins is problematic, because folding depends on the amino acid sequence and changes to the sequence can significantly decrease folding. Robust beta-hairpins that can tolerate such changes are attractive tools for studying interactions involving protein beta-sheets and developing inhibitors of these interactions. This paper introduces a new class of peptide models of protein beta-sheets that addresses the problem of separating folding from the sequence. These model beta-sheets are macrocyclic peptides that fold in water to present a pentapeptide beta-strand along one edge; the other edge contains the tripeptide beta-strand mimic Hao [JACS 2000, 122, 7654] and two additional amino acids. The pentapeptide and Hao-containing peptide strands are connected by two delta-linked ornithine (deltaOrn) turns [JACS 2003, 125, 876]. Each deltaOrn turn contains a free alpha-amino group that permits the linking of individual modules to form divalent beta-sheets. These "cyclic modular beta-sheets" are synthesized by standard solid-phase peptide synthesis of a linear precursor followed by solution-phase cyclization. Eight cyclic modular beta-sheets 1a-1h containing sequences based on beta-amyloid and macrophage inflammatory protein 2 were synthesized and characterized by 1H NMR. Linked cyclic modular beta-sheet 2, which contains two modules of 1b, was also synthesized and characterized. 1H NMR studies show downfield alpha-proton chemical shifts, deltaOrn delta-proton magnetic anisotropy, and NOE cross-peaks that establish all compounds but 1c and 1g to be moderately or well folded into a conformation that resembles a beta-sheet. Pulsed-field gradient NMR diffusion experiments show little or no self-association at low (

DSA: a new internal standard for NMR studies in aqueous solution.

[structure: see text] The widely used internal standard for NMR studies in aqueous solution DSS (sodium 4,4-dimethyl-4-silapentane-1-sulfonate) can interact with cationic peptides, diminishing its value for such studies. This paper introduces DSA (4,4-dimethyl-4-silapentane-1-ammonium trifluoroacetate) as a new internal standard that does not suffer from this problem.