Clinical Dental Student Perception of Oral and Maxillofacial Surgery as a Specialty at Qassim University.

The objective of the current research was to assess and gain insight into the perceptions held by dental students enrolled in the clinical program at Qassim University regarding the specialty of oral and maxillofacial surgery (OMFS). A survey-based cross-sectional study was carried out at the dental clinics of Qassim University, following approval from the Dental Research Center of the university. The study targeted a population consisting of 80 dental interns and undergraduate students (BDS) enrolled at Qassim University. From each academic year (third year to interns), a random selection of 20 students was made, ensuring representation from both male and female sections. Upon analyzing the data regarding the intern and class year of dental students, it was found that there were no statistically significant associations with regard to question 3: "What do you perceive as the most commonly performed procedure by oral and maxillofacial surgeons in practice?" (P = 0.759a). Among intern and dental students, a significant majority identified extraction of the third molars as the most frequent procedure carried out. The lowest percentage (70.4%) was reported among the intern classes, whereas the highest percentage (91.7%) was reported among the fourth-year students. The perceptions of dental students toward OMFS undergo changes during their undergraduate training. By gaining a deeper understanding of these perceptions, the academic faculty specialized in OMFS can enhance their ability to educate students and, in turn, strengthen the overall specialty.

Reliable sustainable management strategies for flare gas recovery: technical, environmental, modeling, and economic assessment: a comprehensive review.

The gas flaring network is an inseparable constituent commonly present in most of the oil and gas refineries and petrochemical facilities conferring reliable operational parameters. The improper disposal of burn-off gases improperly results in environmental problems and loss of economic resources. In this regard, waste to energy transforming nexus, in accord with the "carbon neutrality" term, has potentially emerged as a reasonable pathway to preserve our planet. In a transdisciplinary manner, the present review article deeply outlines the different up-to-date strategies developed to recover the emitted gases (flaring minimization) into different value-added products. To analyze the recovery potential of flare gases, different technologies, and decision-making factors have been critically reviewed to find the best recovery methods. We recommend more straightforward recovery methods despite lower profits. In this regard, electricity generation seems to be an appropriate option for application in small amounts of flaring. However, several flare gas utilization processes such as syngas manufacturing, reinjection of gas into petroleum reservoirs, and production of natural gas liquid (NGL) are also recommended as options because of their economic significance, technological viability (both onshore and offshore), and environmental benefits. Moreover, the adopted computational multi-scale data assimilation for predictive modeling of flare gas recovery scenarios has been systematically reviewed, summarized, and inspected.

Mapping phenotypic performance and novel SNPs for cold tolerance in tomato (Solanum lycopersicum) genotypes through GWAS and population genetics.

The cold stress susceptibility of tomato (Solanum lycopersicum) curtails its cultivation, with significant impact in temperate regions and on cropping seasons. To unravel genomic regions responsible for cold stress resilience, a diverse set of fifty genotypes encompassing cultivated, wild species, and landraces were genotyped using genotyping-by-sequencing. Over two years and six trials employing both early and late sowing, these lines were evaluated. Illumina-based next-generation sequencing produced up to 3 million reads per sample from individually sequenced library pools. The Tassel pipeline yielded 10,802 variants, subsequently filtered to 3,854 SNPs for genome-wide association analysis (GWAS). Employing clustering methods (population structure) via TASSEL, SNPhylo, and Kinship matrix, the fifty genotypes clustered into four distinct gene pools. The GWAS for cold tolerance in tomato integrated key traits including yield. Using six independent phenotypic datasets representing various environments, the study identified 4,517 significant marker-trait associations for cold tolerance traits. Notably, pivotal variations (> 10%) in cold stress tolerance, particularly proline content, were linked to marker-trait associations. Additionally, 5,727 significant marker-trait associations for yield and yield-related traits were unveiled, shedding light on fruit yield and directly associated attributes. The investigation pinpointed 685 candidate genes across all examined traits, including 60 genes associated with biological processes within these genomic regions. Remarkably, 7 out of the 60 genes were directly linked to abiotic stress tolerance, functioning as stress-responsive genes either directly or indirectly. The identified genes, particularly those associated with stress response, could hold the key to enhancing cold tolerance and overall crop productivity in tomato cultivation.

Dual valorization of coastal biowastes for tetracycline remediation and biomethane production: A composite assisted anaerobic digestion.

Harnessing coastal biowaste for dual valorization in water treatment and biofuel production holds paramount importance for sustainability and resource challenges. This study investigated the potential of engineered composite (CABC) derived from coastal biowaste-based materials for tetracycline (TC) removal and biomethane production. High-yield calcium carbonate (CaCO3; 95.65%; bivalve shells) and biochar (GA-BC; 41.50%; green macroalgae) were produced and used as precursors for CABC. The characterization results revealed presence of ß-CaCO3 and ν2-CO3 aragonite in CaCO3, and composite homogeneity was achieved. The CABC exhibited a maximum TC sorption capacity of 342.26 mg/g via synergistic sorption mechanisms (i.e., surface/pore filling, electrostatic attraction, calcium ion exchange, and chelation). Supplementation of anaerobic digestion process with GA-BC, CaCO3, and CABC was investigated via three consecutive cycles. Biochemical methane potential of glucose as a sole substrate was increased from 157.50 to 217.00, 187.00, and 259.00 mL-CH4, while dual substrate (glucose+TC) treatment was increased from 94.5 to 146.5, 129.0, and 153.00 mL-CH4 for GA-BC, CaCO3, and CABC, respectively. Moreover, system stability and TC removal were increased with the addition of GA-BC (40.90%), CaCO3 (16.30%), and CABC (53.70%). Therefore, this study exemplifies the circular bioeconomy approach, demonstrating the sustainable use of biowaste-derived composite for water treatment and biofuel production.

Single Versus Dual Antiplatelet Therapy After Coronary Artery Bypass Grafting for Unprotected Left-Main Coronary Disease.

BACKGROUND: The use of dual antiplatelet therapy (DAPT) after coronary revascularization for left-main disease is still debated. The study aimed to characterize patients who received dual versus single antiplatelet therapy (SAPT) after coronary artery bypass grafting (CABG) for unprotected left-main disease and compare the outcomes of those patients. RESULTS: This multicenter retrospective cohort study included 551 patients who were grouped into 2 groups: patients who received SAPT (n = 150) and those who received DAPT (n = 401). There were no differences in age ( P = 0.451), gender ( P = 0.063), smoking ( P = 0.941), diabetes mellitus ( P = 0.773), history of myocardial infarction ( P = 0.709), chronic kidney disease ( P = 0.615), atrial fibrillation ( P = 0.306), or cerebrovascular accident ( P = 0.550) between patients who received SAPT versus DAPT. DAPTs were more commonly used in patients with acute coronary syndrome [87 (58%) vs. 273 (68.08%); P = 0.027], after off-pump CABG [12 (8%) vs. 73 (18.2%); P = 0.003] and in patients with radial artery grafts [1 (0.67%) vs. 32 (7.98%); P < 0.001]. While SAPTs were more commonly used in patients with low ejection fraction [55 (36.67%) vs. 61 (15.21%); P < 0.001] and in patients with postoperative acute kidney injury [27 (18%) vs. 37 (9.23%); P = 0.004]. The attributed treatment effect of DAPT for follow-up major adverse cerebrovascular and cardiac events was not significantly different from that of SAPT [ß, -2.08 (95% confidence interval (CI), -20.8-16.7); P = 0.828]. The attributed treatment effect of DAPT on follow-up all-cause mortality was not significantly different from that of SAPT [ß, 4.12 (CI, -11.1-19.32); P = 0.595]. There was no difference in bleeding between groups ( P = 0.666). CONCLUSIONS: DAPTs were more commonly used in patients with acute coronary syndrome, after off-pump CABG, and with radial artery grafts. SAPTs were more commonly used in patients with low ejection fraction and acute kidney injury. Patients on DAPT after CABG for left-main disease had comparable major adverse cerebrovascular and cardiac events and survival to patients on SAPT, with no difference in bleeding events.

Cationic Surfactant-Modified Tetraselmis sp. for the Removal of Organic Dyes from Aqueous Solution.

The modification of the Tetraselmis sp. algae material (Tetra-Alg) with surfactant Cethyltrimethylammonium Bromide (CTAB) yielded adsorbent Tetra-Alg-CTAB as an adsorbent of methyl orange (MO) and methylene blue (MB) solutions. The characterization of the adsorbent used an infrared (IR) spectrometer to identify functional groups and Scanning Electron Microscopy with Energy Dispersive X-ray (SEM-EDX FEI Inspect-S50, Midland, ON, Canada) to determine the surface morphology and elemental composition. Methyl orange and methylene blue adsorption on the adsorbent Tetra-Alg, Tetraselmis sp. algae-modified Na+ ions (Tetra-Alg-Na), and Tetra-Alg-CTAB were studied, including variations in pH, contact time, concentration, and reuse of adsorbents. The adsorption of MO and MB by Tetra-Alg-CTAB at pH 10, during a contact time of 90 min, and at a concentration of 250 mg L-1 resulted in MO and MB being absorbed in the amounts of 128.369 and 51.013 mg g-1, respectively. The adsorption kinetics and adsorption isotherms of MO and MB and Tetra-Alg, Tetra-Alg-Na, and Tetra-Alg-CTAB tend to follow pseudo-second-order kinetics models and Freundlich adsorption isotherms with each correlation coefficient value (R2) approaching 1. Due to the modification with the cationic surfactant CTAB, anionic dyes can be strongly sorbed in alkaline pH due to strong electrostatic attraction, while MB is more likely to involve cation exchange and hydrogen bonding. The reuse of Tetra-Alg-CTAB was carried out four times with adsorption percent > 70%, and the adsorbent was very effective in the adsorption of anionic dyes such as MO.

Fusarium flocciferum, causing wilt disease of chili (Capsicum annuum L.) in Northern Himalayas: A first report.

In August 2020 chili (Capsicum annuum L.) showing wilt symptoms were collected from different districts of the Kashmir: Pulwama, Srinagar, Baramulla, and Anantnag. From each district one location was selected for sample collection and a total of 23 chili isolates were isolated. The tissue bit technique was used to isolate fungus from the infected samples on potato dextrose agar (PDA) medium, purified using the single spore technique, maintained at 25°±1℃ and then stored at 4° C (Ferniah et al. 2014) . Initially cultural characteristics appeared as white colonies which gradually turned to pale white colored and attained a growth of 90 mm in 18 days of incubation at 25 ± 1°C. Microscopic observations revealed that mycelium was branched and cylindrical, 3.53-4.98 µm in width. Microconidia were ellipsoidal, hyaline, 0-1 septa werepresent, and 6-7 x 3-4 µm in size. Macroconidia were cylindrical, hyaline, 2-6 septa, measuring 20-60 x 40-45 µm in size. Molecular identification of the pathogens with ITS, TEF, and RPB2 was successfully carried out and the fungi was confirmed as Fusarium flocciferum infecting chili. Amplified PCR products were sequenced and were successfully submitted and accessioned in GenBank with accession number OM189458, OM441199, OR484037 for ITS, TEF, and RPB2 gene. To confirm Koch's postulates pathogenicity test was carried out using rhizosphere inoculation technique (Najar et al. 2011, Parihar et al. 2022). In total 7 replications for sand maize meal medium (potting mixture) was prepared by autoclaving 90 g of sand and 10 g of maize meal in 250 ml of erlenmeyer flask comprising 40 ml of distilled water. The spore suspension at 100 µl per pot was inoculated and was mixed with the sterilized potting mixture in a ratio of (2:1) and up to seven days pathogen was allowed to infect the soil (Davey and Papavizas 1962; Hami et al. 2021). Then chili seeds (cv. Kashmir long-1) were sown in infected potting mixture and grown for three weeks to allow the pathogen to infect the host plants. F. flocciferum took six weeks for appearance of symptoms in the infected potted plants. Control mock inoculation of the potting mixture was carried out using water droplets instead of spore suspension at 100 µl per pot. Seven replications were kept for both inoculated and un-inoculated / control mock pots. The plants developed initial symptoms from light green to yellowish discoloration of leaves followed by the drooping, shriveling, and ultimately leading to death. The collar region of the plant was cut vertically and observed that vascular bundles showed brownish spots and discoloration, indicating wilt as the cause of death. The pathogens were re-isolated and inoculated from all infected plants, then compared with their original pure culture inoculated first, which completely resembled based on morphological, cultural, and pathogenic characteristics. No symptoms were observed on control plants. A phylogenetic analysis was also carried out using ClustalW software that grouped the species identified by different genes into different clades. F. flocciferum has been reported earlier in pea, faba bean and bamboo (Kainthola et al. 2022; Sisic et al. 2020) . In solanaceous crops, this species have been explored as wilt pathogens for the first time from India, indicating diversifying nature of Fusarium flocciferum across various hosts including solanaceous crops.

Effect of the magnetic core in alginate/gum composite on adsorption of divalent copper, cadmium, and lead ions in the aqueous system.

The change of composition of an adsorbent material has been widely used as a method to increase its adsorption capacity, particularly concerning adsorbents made of polysaccharides. Introducing magnetic adsorbents into contaminated water treatment systems is a highly promising strategy, as it promotes the metal ions removal from water. Considering this, gum Arabic (GA) was associated with alginate (Alg), when magnetite nanoparticles were present or absent, to produce beads that were utilised to take up Cu(II), Cd(II), and Pb(II) from aqueous solution. After a complete characterisation (for which Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, and swelling were used), the adsorption properties were established using batch and column tests. The magnetic beads (MAlg/GA) demonstrated improved adsorption in comparison with the beads made without magnetite (Alg/GA) under the same conditions. In normal adsorption conditions (pH 6.0, 25 °C, 2.5 g L-1 of adsorbent dosage), the highest uptake capacities recorded for the MAlg/GA beads were: for Cu(II), 1.33 mmol g-1; Cd(II), 1.59 mmol g-1; and for Pb(II), 1.43 mmol g-1. The pseudo-second-order kinetics and Langmuir isotherm models provided good fits for the adsorption of these metals. Overall, ion exchange and physical forces led to the uptake of these metals by both Alg/GA and MAlg/GA; moreover, the functional groups on the beads played crucial roles as binding sites. Additionally, it was observed that flow rates of >2 mL min-1 did not produce noticeable changes in uptake levels over the same flow period. It was found that the efficient eluting agent was HNO3 (0.2 M). In some cases, the metals were not removed fully from the used beads during the first five cycles of regeneration and reuse. The results of this investigation show that these beads are efficient adsorbents for the removal of metal ions from spiked well water samples.

Study on the impact of exogenously applied methyl jasmonate concentrations on Solanum lycopersicum under low temperature stress.

BACKGROUND: To decipher the capability of Methyl Jasmonate (MeJA) in resisting cold stress in Solanum lycopersicum assessment regarding various physiological parameters in response to diverse doses of MeJA was done. Low temperature (LT) were given to the plants with MeJA (J1C, J2C, J3C) or without MeJA (LT) application. MeJA in the form of foliar spray was given before stress, during stress and after stress. Three concentrations of MeJA were used under normal and LT stress conditions that includes of J1 (0.5 µM), J2 (10 µM), and J3 (15 µM). RESULTS: Oxidative stress, growth characteristics, stress tolerance parameters, antioxidant response and photosynthetic parameters were investigated. In our current study we observed that oxidative stress markers declined by MeJA supplementation under cold stress conditions. MeJA boosted antioxidant enzyme activity along with photosynthetic parameters. The best concentration of MeJA was J2 based on results obtained. This is the first study related to MeJA best dose screening in Solanum lycopersicum under LT stress conditions. CONCLUSION: The LT stress in the Solanum lycopersicum plant was reduced by MeJA. The adverse consequences of LT stress can be significantly attenuated by the J2 concentration of MeJA. So, the optimal concentration of MeJA supplied exogenously to LT stressed Solanum lycopersicum can be a smart strategy to mitigate harmful impact of LT stress on detox system and overall growth of plant.

Effect of Blackcurrant Consumption on the Genitourinary System: A Literature Review.

Both in vivo and in vitro studies have shown that functional plant-based food such as fruits, vegetables, and berries can enhance health, have preventive effects, and reduce the risk of several chronic diseases. This review discusses blackcurrant fruit usage in humans and experimental animals and its effect on the genitourinary system (GUS). This comprehensive review demonstrates that blackcurrants and their bioactive compounds possess medicinal and therapeutic properties related to the GUS. Emphasis in the literature has been placed on the bioavailability of the active blackcurrant components. Nonetheless, future clinical trials are needed to investigate and improve the bioavailability of blackcurrant phenolic compounds, such as anthocyanins, and to expand the evidence that active blackcurrant compounds can treat various genitourinary diseases.

Percutaneous coronary intervention vs. coronary artery bypass grafting in emergency and non-emergency unprotected left-main revascularization.

BACKGROUND: The optimal revascularization strategy in patients with left main coronary artery (LMCA) disease in the emergency setting is still controversial. Thus, we aimed to compare the outcomes of percutaneous coronary interventions (PCI) vs. coronary artery bypass grafting (CABG) in patients with and without emergent LMCA disease. METHODS: This retrospective cohort study included 2138 patients recruited from 14 centers between 2015 and 2019. We compared patients with emergent LMCA revascularization who underwent PCI (n = 264) to patients who underwent CABG (n = 196) and patients with non-emergent LMCA revascularization with PCI (n = 958) to those who underwent CABG (n = 720). The study outcomes were in-hospital and follow-up all-cause mortality and major adverse cardiovascular and cerebrovascular events (MACCE). RESULTS: Emergency PCI patients were older and had a significantly higher prevalence of chronic kidney disease, lower ejection fraction, and higher EuroSCORE than CABG patients. CABG patients had significantly higher SYNTAX scores, multivessel disease, and ostial lesions. In patients presenting with arrest, PCI had significantly lower MACCE (P = 0.017) and in-hospital mortality (P = 0.016) than CABG. In non-emergent revascularization, PCI was associated with lower MACCE in patients with low (P = 0.015) and intermediate (P < 0.001) EuroSCORE. PCI was associated with lower MACCE in patients with low (P = 0.002) and intermediate (P = 0.008) SYNTAX scores. In non-emergent revascularization, PCI was associated with reduced hospital mortality in patients with intermediate (P = 0.001) and high (P = 0.002) EuroSCORE compared to CABG. PCI was associated with lower hospital mortality in patients with low (P = 0.031) and intermediate (P = 0.001) SYNTAX scores. At a median follow-up time of 20 months (IQR: 10-37), emergency PCI had lower MACCE compared to CABG [HR: 0.30 (95% CI 0.14-0.66), P < 0.003], with no significant difference in all-cause mortality between emergency PCI and CABG [HR: 1.18 (95% CI 0.23-6.08), P = 0.845]. CONCLUSIONS: PCI could be advantageous over CABG in revascularizing LMCA disease in emergencies. PCI could be preferred for revascularization of non-emergent LMCA in patients with intermediate EuroSCORE and low and intermediate SYNTAX scores.

Left Main Coronary Artery Revascularization in Patients with Impaired Renal Function: Percutaneous Coronary Intervention versus Coronary Artery Bypass Grafting.

INTRODUCTION: The evidence about the optimal revascularization strategy in patients with left main coronary artery (LMCA) disease and impaired renal function is limited. Thus, we aimed to compare the outcomes of LMCA disease revascularization (percutaneous coronary intervention [PCI] vs. coronary artery bypass grafting [CABG]) in patients with and without impaired renal function. METHODS: This retrospective cohort study included 2,138 patients recruited from 14 centers between 2015 and 2,019. We compared patients with impaired renal function who had PCI (n= 316) to those who had CABG (n = 121) and compared patients with normal renal function who had PCI (n = 906) to those who had CABG (n = 795). The study outcomes were in-hospital and follow-up major adverse cardiovascular and cerebrovascular events (MACCE). RESULTS: Multivariable logistic regression analysis showed that the risk of in-hospital MACCE was significantly higher in CABG compared to PCI in patients with impaired renal function (odds ratio [OR]: 8.13 [95% CI: 4.19-15.76], p < 0.001) and normal renal function (OR: 2.59 [95% CI: 1.79-3.73]; p < 0.001). There were no differences in follow-up MACCE between CABG and PCI in patients with impaired renal function (HR: 1.14 [95% CI: 0.71-1.81], p = 0.585) and normal renal function (HR: 1.12 [0.90-1.39], p = 0.312). CONCLUSIONS: PCI could have an advantage over CABG in revascularization of LMCA disease in patients with impaired renal function regarding in-hospital MACCE. The follow-up MACCE was comparable between PCI and CABG in patients with impaired and normal renal function.

Functionalization of carbon from rubber fruit shells (Hevea brasiliensis) with silane agents and its application to the adsorption of bi-component mixtures of methylene blue and crystal violet.

In this research, activated carbon was obtained from rubber fruit shells (ACRPs). The obtained activated carbon (ACRPs) was modified by magnetite particle coating and silanization with triethoxyiphenylsilane (TEPS) to produce a new magnetic adsorbent (ACRPs-MS). The affinity of as-prepared adsorbent (ACRPs-MS) toward methylene blue (MB) and crystal violet (CV) dyes was tested in mono-component and bi-component solutions. Structural characterization proves the success of the magnetite coating process and the silanization of ACRPs. In the infrared (IR) spectroscopy spectrum of ACRPs-MS, Si-O-Fe and Si-O-Si bonds were identified, which indicated the presence of magnetite and silane. This is also supported by the elemental composition contained in the energy-dispersive X-ray (EDX) diffractogram. In addition, the presence of the porous structure of the surface of the material and the increase in the specific surface area increase the accessibility of contaminants such as MB and CV dyes to be adsorbed to the ACRPs-MS adsorption site effectively. The experimental results showed that the adsorption of mono-component MB and CV dyes by ACRPs-MS was optimum at pH 8 and an interaction time of 60 min. The adsorption kinetics of mono-component MB and CV dyes by ACRPs-MS tended to follow pseudo-second-order kinetics (PSO) models with PSO rate constant (k2) values of 0.198 and 0.993 g mg-1 min-1, respectively. The adsorption of MB and CV dyes by ACRPs-MS in a bi-component mixture tends to follow the Langmuir isotherm model with adsorption capacity (qm) values of 85.060 and 90.504 mg g-1, respectively. Analysis of adsorption data on the bi-component mixture between MB and CV by ACRPs-MS with the Langmuir isotherm equation for a binary mixture resulted in qm of 22.645 × 10-3 mmol equiv g-1. ACRPs-MS material can be used repeatedly five times with adsorption ability > 80%. Desorption of MB and CV dyes was carried out using 0.05 M HCl solution. ACRPs-MS material was able to adsorb MB and CV dyes with a large adsorption capacity and could be used in repeated adsorption. Thus, it can be stated that ACRPs-MS can be used as an effective adsorbent for MB and CV dyes, either singly or in a bi-component mixture.

Awareness and Acceptance for COVID-19 Booster Dose Vaccination among Residents of Saudi Arabia: Findings of a Cross-Sectional Study.

BACKGROUND: In the global effort to combat SARS CoV2 infection, adoption of the vaccination has been an essential component. The goal of this research was to determine the quality of web-based information gathered during COVID-19 and participants' awareness and acceptance for the booster dose for COVID-19. METHODS: This cross-sectional study was carried out to gauge interest in and willingness for a booster dose, as well as the satisfaction with the availability and accuracy of Internet resources. This study included 631 people from the cities of Riyadh, Al Majma'ah, Al Ghat, and Zulfi in the Riyadh Area. Chi-square and Fischer's exact tests, with a 95% confidence interval, and a threshold of p < 0.05, were used to analyze the significance of associations between variables. RESULTS: Out of 631 respondents, 347 people who reported willingness to receive the immunization were women (319, 91.9%), with only 28 (8.1%) being men. There was a statistically significant correlation between individuals who worried about booster dosage adverse effects and those who did not receive the immunization. Knowledge of the efficacy of the vaccine, confidence in the capacity of the vaccine to avert problems, and willingness to receive a third dosage were all shown to be substantially correlated (p < 0.001). Attitude and behavior ratings were substantially correlated with prior COVID-19 immunization status (p < 0.005). CONCLUSIONS: There was a significant correlation between vaccination knowledge, confidence in the capacity of the vaccine to prevent problems, and willingness to receive a third dose. Therefore, our research can help policymakers develop more precise and scientific roll-out strategies for the COVID-19 booster vaccination.

Whole genome sequencing of Wilsonomyces carpophilus, an incitant of shot hole disease in stone fruits: insights into secreted proteins of a necrotrophic fungal repository.

BACKGROUND: Shot hole is one of the important fungal diseases in stone fruits viz., peach, plum, apricot and cherry caused by Wilsonomyces carpophilus and almond among nut crops. Fungicides significantly decrease the disease. Pathogenicity studies proved a wide host range of the pathogen infecting all stone fruits and almond among the nut crops, however, the mechanism underlying host-pathogen interaction is still unknown. Molecular detection of the pathogen using polymerase chain reaction (PCR) based simple sequence repeat (SSR) markers is also unknown due to the unavailability of the pathogen genome. METHODS AND RESULTS: We examined the morphology, pathology and genomics of the Wilsonomyces carpophilus. Whole genome sequencing of the W. carpophilus was carried out by Illumina HiSeq and PacBio high throughput sequencing plate-forms through hybrid assembly. Constant selection pressure alters the molecular mechanism of the pathogen causing disease. The studies revealed that the necrotrophs are more lethal with a complex pathogenicity mechanism and little-understood effector repositories. The different isolates of necrotrophic fungus W. carpophilus causing shot hole in stone fruits namely peach, plum, apricot and cherry, and almonds among the nut crops showed a significant variation in their morphology, however, the probability value (p = 0.29) suggests in-significant difference in the pathogenicity. Here, we reported draft genome of W. carpophilus of size 29.9 Mb (Accession number: PRJNA791904). A total of 10,901 protein-coding genes were predicted, including heterokaryon incompatibility genes, cytochrome-p450 genes, kinases, sugar transporters among others. We found 2851 simple sequence repeats (SSRs), tRNAs, rRNAs and pseudogenes in the genome. The most prominent proteins showing necrotrophic lifestyle of the pathogen were hydrolases, polysaccharide-degrading enzymes, esterolytic, lipolytic, and proteolytic enzymes accounted for 225 released proteins. Among the 223 fungal species, top-hit species distribution revealed the majority of hits against the Pyrenochaeta species followed by Ascochyta rabiei and Alternaria alternata. CONCLUSION: Draft genome of W. carpophilus is 29.9 Mb based on Illumina HiSeq and PacBio hybrid assembly. The necrotrophs are more lethal with a complex pathogenicity mechanism. A significant variation in morphology was observed in different pathogen isolates. A total of 10,901 protein-coding genes were predicted in the pathogen genome including heterokaryon incompatibility, cytochrome-p450 genes, kinases and sugar transporters. We found 2851 SSRs, tRNAs, rRNAs and pseudogenes, and prominent proteins showing necrotrophic lifestyle such as hydrolases, polysaccharide-degrading enzymes, esterolytic, lipolytic and proteolytic enzymes. The top-hit species distribution were against the Pyrenochaeta spp. followed by Ascochyta rabiei.

Drug Standardization through Pharmacognostic Approaches and Estimation of Anticancer Potential of Chamomile (Matricaria chamomilla L.) using Prostate-Cancer cell lines: An In-vitro Study.

Cancer is the major challenge across world and the adenocarcinoma of prostate malignancy is the second most prevalent male cancer. Various medicinal plants are used for the treatment and management of various cancers. Matricaria chamomilla L., is one of the extensively used Unani medicament for the treatment of various type of diseases. In the current study we evaluated most of the parameters prescribed for drug standardization using pharmacognostic approaches. The 2,2 Diphenyl-1-picryl hydrazyl (DPPH) method was utilized for the analysis of antioxidant activity in the flower extracts of M. chamomilla. Moreover, we analyzed the antioxidant and cytotoxic activity of M. chamomilla (Gul-e Babuna) through in-vitro method. DPPH (2,2-diphenyl-1-picryl-hydrazl-hydrate) method was utilized for the analysis of antioxidant activity in the flower extracts of M. chamomilla. CFU and wound healing assay were performed to determine the anti-cancer activity. The results demonstrated that various extracts of M. chamomilla fulfilled most of the parameters of drug standardization and contained good antioxidant and anticancer activities. The ethyl acetate showed higher anticancer activity followed by aqueous, hydroalcoholic, petroleum benzene and methanol by CFU method. Also, the wound healing assay demonstrated that ethyl acetate extract has more significant effect followed by methanol and petroleum benzene extract on prostate cancer cell line (C4-2). The current study concluded that the extract of M. chamomilla flowers could act as good source of natural anti-cancer compounds.

Sustainable management of food waste; pre-treatment strategies, techno-economic assessment, bibliometric analysis, and potential utilizations: A systematic review.

Food waste (FW) contains many nutritional components such as proteins, lipids, fats, polysaccharides, carbohydrates, and metal ions, which can be reused in some processes to produce value-added products. Furthermore, FW can be converted into biogas, biohydrogen, and biodiesel, and this type of green energy can be used as an alternative to nonrenewable fuel and reduce reliance on fossil fuel sources. It has been demonstrated in many reports that at the laboratory scale production of biochemicals using FW is as good as pure carbon sources. The goal of this paper is to review approaches used globally to promote turning FW into useable products and green energy. In this context, the present review article highlights deeply in a transdisciplinary manner the sources, types, impacts, characteristics, pre-treatment strategies, and potential management of FW into value-added products. We find that FW could be upcycled into different valuable products such as eco-friendly green fuels, organic acids, bioplastics, enzymes, fertilizers, char, and single-cell protein, after the suitable pre-treatment method. The results confirmed the technical feasibility of all the reviewed transformation processes of FW. Furthermore, life cycle and techno-economic assessment studies regarding the socio-economic, environmental, and engineering aspects of FW management are discussed. The reviewed articles showed that energy recovery from FW in various forms is economically feasible.

Methylene blue removal from aqueous solutions using a biochar/gellan gum hydrogel composite: Effect of agitation mode on sorption kinetics.

Hydrogel membranes are prepared by casting a mixture of gellan gum (associated with PVA) and biochar produced from a local Egyptian plant. The mesoporous material is characterized by a specific surface area close to 134 m2 g-1, a residue of 28 % (at 800 °C), and a pHPZC close to 6.43. After grinding, the material is tested for Methylene Blue sorption at pH 10.5: sorption capacity reaches 1.70 mmol MB g-1 (synergistic effect of the precursors). The sorption isotherms are fitted by both Langmuir and Sips eqs. MB sorption increases with temperature: the sorption is endothermic (∆H°: 12.9 kJ mol-1), with positive entropy (∆S°: 125 J mol-1 K-1). Uptake kinetics are controlled by agitation speed (optimum ≈200 rpm) and resistance to intraparticle diffusion. The profiles are strongly affected by the mode of agitation: the equilibrium time (≈180 min) is reduced to 20-30 min under sonication (especially at frequency: 80 kHz). The mode of agitation controls the best fitting equation: pseudo-first order rate agitation for mechanical agitation contrary to pseudo-second order rate under sonication. The sorption of MB is poorly affected by ionic strength (loss <6 % in 45 g L-1 NaCl solution). Desorption (faster than sorption) is completely achieved using 0.7 M HCl solution. At the sixth recycling, the loss in sorption is close to 5 % (≈ decrease in desorption efficiency). The process is successfully applied for the treatment of MB-spiked industrial solution: the color index decreases by >97 % with a sorbent dose close to 1 g L-1; a higher dose is required for maximum reduction of the COD (60 % at 3 g L-1).

Effect of concentrates level on digestibility, ruminal fermentation, and bacterial community in growing camels.

Understanding the rumen microbiota of camels under different feeding conditions is necessary to optimize rumen fermentation and productivity. This study aims to investigate the effects of different concentrate supplement levels on digestion, rumen fermentation and bacteria in growing camels. Fifteen growing camels were divided into three groups and were fed alfalfa hay in addition to one of the three concentrate supplement levels based on body weight (BW): low (0.7%), medium (1%), and high (1.3%). Increasing the concentrate supplement level in the diet increased total dry matter intake but had no effect on nutrients digestibility, except for crude protein digestibility, which was enhanced with the high concentrate level. Growing camels at low-level had considerably higher rumen pH than those fed medium or high levels. Increasing the supplement level also increased rumen propionic acid but decreased acetic acid concentration. Principal coordinate analysis showed that concentrate levels clearly separated the ruminal bacterial communities where Bacteroidetes and Firmicutes were the dominant phyla and Prevotella, Ruminococcus, Butyrivibrio, RC9_gut_group, and Fibrobacteres were the dominant bacterial genera. This study expands our knowledge regarding the rumen microbiota of growing camels under different concentrate levels and reveals that medium concentrate levels could be appropriate for growing camels.

Biochemical and proteomic insights revealed selenium priming induced phosphorus stress tolerance in common bean (Phaseolus vulgaris L.).

BACKGROUND: Mineral stress is one of the dominating abiotic stresses, which leads to decrease in crop production. Selenium (Se) seed priming is a recent approach to mitigate the plant's mineral deficiency stress. Although not an essential element, Se has beneficial effects on the plants in terms of growth, quality, yield and plant defense system thus, enhancing plant tolerance to mineral deficiency. METHODS AND RESULTS: The present research was accomplished to find out the effect of Se priming on common bean plant (SFB-1 variety) under phosphorus (P) stress. The seeds were grown invitro on four different MGRL media which are normal MGRL media as control with non-Se primed seeds (Se- P+), non -Se primed seeds grown on P deficient MGRL media (Se- P-), Se primed seeds grown on normal MGRL media (Se+P+) and Se primed seeds grown on P deficient MGRL media (Se+P -). The various morphological and biochemical parameters such as proline content, total sugar content, polyphenols and expression of proteins were analyzed under P stress. The results showed that Se priming has significantly (p ≤ 0.05) affected the morphological as well as biochemical parameters under normal and P stress conditions. The morphological parameters-length, weight, number of nodes and leaves of Se+P+, Se+P- root and shoot tissue showed significant increase as compared to Se-P+, Se-P-. Similarly various biochemical parameters such as total chlorophyll content, proline, total sugar content and polyphenols of Se+P+, Se+P- increased significantly as compared to Se-P+, Se-P-. The differential protein expression in both Se+P+, Se+P- and Se-P+, Se-P- plants were determined using MALDI-MS/MS. The differentially expressed proteins in Se+P+, Se+P- plants were identified as caffeic acid-3-O-methyltransferase (COMT) and SecA protein (a subunit of Protein Translocan transporter), and are found responsible for lignin synthesis in root cell walls and ATP dependent movement of thylakoid proteins across the membranes in shoot respectively. The differential expression of proteins in plant tissues, validated morphological and biochemical responses such as maintaining membrane integrity, enhanced modifications in cellular metabolism, improved polyphenol activities and expression of defensive proteins against mineral deficiency. CONCLUSIONS: The study provided an understanding of Se application as a potential approach increasing tolerance and yield in crop plants against mineral deficiency.