Ionic Silver and Electrical Treatment for Susceptibility and Disinfection of Escherichia coli Biofilm-Contaminated Titanium Surface.

In this work, surface disinfection and biofilm susceptibility were investigated by applying ionic silver of 0.4-1.6 µg/mL and cathodic voltage-controlled electrical treatment of 1.8 V and a current of 30 mA to Escherichia coli (E. coli) ATCC 25922 biofilm-contaminated titanium substrates. Herein, it is evident that the treatment exhibited the potential use to enhance the susceptibility of bacterial biofilms for surface disinfection. In vitro studies have demonstrated that the ionic silver treatment of 60 min significantly increased the logarithmic reduction (LR) of bacterial populations on disinfectant-treated substrates and the electrical treatment enhanced the silver susceptibility of E. coli biofilms. The LR values after the ionic silver treatments and the electric-enhanced silver treatments were in the ranges of 1.94-2.25 and 2.10-2.73, respectively. The treatment was also associated with morphological changes in silver-treated E. coli cells and biofilm-contaminated titanium surfaces. Nevertheless, the treatments showed no cytotoxic effects on the L929 mouse skin fibroblast cell line and only a slight decrease in pH was observed during the electrical polarization of titanium substrate.

Interconnected Micro, Meso, and Macro Porous Activated Carbon from Bacterial Nanocellulose for Superior Adsorption Properties and Effective Catalytic Performance.

The porous carbon (bacterial cellulose (BC)-activated carbon (AC)(BA)) prepared via two-step activation of bacterial nanocellulose by treatments with potassium hydroxide (KOH) and then phosphoric acid (H3PO4) solutions showed superior adsorption properties and effective performance as catalyst support. BC-AC(BA) had an open and interconnected multi-porous structure, consisting of micropores (0.23 cm3/g), mesopores (0.26 cm3/g), and macropores (4.40 cm3/g). The BET surface area and porosity were 833 m2/g and 91.2%, respectively. The methylene blue adsorption test demonstrated that BC-AC(BA) was superior in its mass transfer rate and adsorption capacities. Moreover, BC-AC(BA) modified by H3PO4 treatment showed a significant enhancement of catalytic performance for dehydration of ethanol. At the reaction temperature of 250-400 °C, 30P/BC-AC(BA) gave ethanol conversion at 88.4-100%, with ethylene selectivity of 82.6-100%, whereas, high selectivity for diethyl ether (DEE) at 75.2%, at ethanol conversion of 60.1%, was obtained at the reaction temperature of 200 °C.

Synthesis of mesoporous MFI zeolite via bacterial cellulose-derived carbon templating for fast adsorption of formaldehyde.

Mesoporous ZSM-5 (MFI) zeolite was synthesized by using bacterial cellulose-derived activated carbon (BC-AC500) with a high surface area as a hard template. Different ratios of BC-AC500 and zeolite precursor gel were prepared in a Teflon-lined autoclave and crystallized at 180 °C for 48 h in a rotating oven. The physicochemical properties of the samples were characterized by x-ray diffraction (XRD), scanning/transmission electron microscopies (SEM/TEM), and N2 physisorption techniques. It was found that the mesoporous ZSM-5 zeolites have a specific surface area of 184-190 m2/g, a high mesopore volume of 0.120-0.956 ml/g and a wide pore size distribution ranging from 5 to 100 nm with a maximum at approximately 25.3 nm. The successfully made mesoporous ZSM-5 was tested as an adsorbent for formaldehyde adsorption in batch mode. The mesoporous ZSM-5 zeolite made from bacterial cellulose-derived activated carbon showed significantly faster adsorption kinetics than conventional ZSM-5 (0.0081 vs. 0.0007 g/mg min, respectively). The prepared material has an adsorption capacity of 98 mg/g and is highly reusable. The reported mesoporous ZSM-5 zeolites can be deployed for the rapid removal of toxic organics from wastewater when urgently needed, e.g., under breakthrough conditions.

Hydrolysis of cassava starch by co-immobilized multi-microorganisms of Loog-Pang (Thai rice cake starter) for ethanol fermentation.

Loog-Pang (Thai rice cake starter) is an effective and inexpensive microbial source for the hydrolysis of cassava starch to glucose. A process for hydrolysis of cassava starch to glucose by Loog- Pang was improved by co-immobilized multi-microorganisms (IC) using thin shell silk cocoon (TSC). After incubation at 35°C for 120 h, the IC-TSC system converted 20% w/v cassava starch slurry into clear glucose syrup containing a glucose concentration of 145.5 g/L (composed of 98.8% glucose and 1.2% oligosaccharides), with little or no contamination by microorganisms. The glucose concentration from the starch hydrolysis process using the IC-TSC system was approximately 1.3 times more than that of suspended cultures (SC). The starch hydrolysate could be used as the carbon source for ethanol fermentation without sterilization. A concentration of ethanol of 71.2 g/L (9.1%, v/v) was obtained at 36 h fermentation of the starch hydrolysate by Saccharomyces cerevisiae M30.

Structural modification and characterization of bacterial cellulose-alginate composite scaffolds for tissue engineering.

A novel bacterial cellulose-alginate composite scaffold (N-BCA) was fabricated by freeze drying and subsequent crosslinking with Ca(2+). The N-BCA then underwent a second freeze drying step to remove water without altering the physical structure. A stable structure of N-BCA with open and highly interconnected pores in the range of 90-160 µm was constructed. The N-BCA was stable in both water and PBS. The swelling ability of N-BCA in water was approximately 50 times its weight, which was about 6.5 times that of the freeze dried bacterial cellulose pellicles. N-BCA demonstrated no cytotoxicity against L929 mouse fibroblast cells. For long-term culture, N-BCA supported attachment, spreading, and proliferation of human gingival fibroblast (GF) on the surface. However, under static conditions, the cell migration and growth inside the scaffold were limited. Because of its biocompatibility and open macroporous structure, N-BCA could potentially be used as a scaffold for tissue engineering.