Large-area low-noise flexible organic photodiodes for detecting faint visible light.

Silicon photodiodes are the foundation of light-detection technology; yet their rigid structure and limited area scaling at low cost hamper their use in several emerging applications. A detailed methodology for the characterization of organic photodiodes based on polymeric bulk heterojunctions reveals the influence that charge-collecting electrodes have on the electronic noise at low frequency. The performance of optimized organic photodiodes is found to rival that of low-noise silicon photodiodes in all metrics within the visible spectral range, except response time, which is still video-rate compatible. Solution-processed organic photodiodes offer several design opportunities exemplified in a biometric monitoring application that uses ring-shaped, large-area, flexible, organic photodiodes with silicon-level performance.

A Study on Reducing Contact Resistance in Solution-Processed Organic Field-Effect Transistors.

We report on the reduction of contact resistance in solution-processed TIPS-pentacene (6,13-bis(triisopropylsilylethynyl)pentacene) and PTAA (poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine]) top-gate bottom-contact organic field-effect transistors (OFETs) by using different contact-modification strategies. The study compares the contact resistance values in devices that comprise Au source/drain electrodes either treated with 2,3,4,5,6-pentafluorothiophenol (PFBT), or modified with an evaporated thin layer of the metal-organic molecular dopant molybdenum tris-[1,2-bis(trifluoromethyl)ethane-1,2-dithiolene] (Mo(tfd)3), or modified with a thin layer of the oxide MoO3. An improved performance is observed in devices modified with Mo(tfd)3 or MoO3 as compared to devices in which Au electrodes are modified with PFBT. We discuss the origin of the decrease in contact resistance in terms of increase of the work function of the modified Au electrodes, Fermi-level pinning effects, and decrease of bulk resistance by electrically doping the organic semiconductor films in the vicinity of the source/drain electrodes.

Simultaneous cross-linking and p-doping of a polymeric semiconductor film by immersion into a phosphomolybdic acid solution for use in organic solar cells.

Poly[N-9'-heptadecanyl-2,7-carbazole-alt-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)] (PCDTBT) is shown to be simultaneously cross-linked and p-doped when immersed into a phosphomolybdic acid solution, yielding conductive films with low solubility that can withstand the solution processing of subsequent photoactive layers. Such a modified PCDTBT film serves to improve hole collection and limit carrier recombination in organic solar cells.

Organometallic dimers: application to work-function reduction of conducting oxides.

The dimers of pentamethyliridocene and ruthenium pentamethylcyclopentadienyl mesitylene, (IrCp*Cp)2 and (RuCp*mes)2, respectively, are shown here to be effective solution-processable reagents for lowering the work functions of electrode materials; this approach is compared to the use of solution-deposited films of ethoxylated poly(ethylenimine) (PEIE). The work functions of indium tin oxide (ITO), zinc oxide, and gold electrodes can be reduced to 3.3-3.4 eV by immersion in a toluene solution of (IrCp*Cp)2; these values are similar to those that can be obtained by spin-coating a thin layer of PEIE onto the electrodes. The work-function reductions achieved using (IrCp*Cp)2 are primarily attributable to the interface dipoles associated with the formation of submonolayers of IrCp*Cp(+) cations on negatively charged substrates, which in turn result from redox reactions between the dimer and the electrode. The electrical properties of C60 diodes with dimer-modified ITO cathodes are similar to those of analogous devices with PEIE-modified ITO cathodes.

Organic photovoltaic cells with stable top metal electrodes modified with polyethylenimine.

Efficient organic photovoltaic cells (OPV) often contain highly reactive low-work-function calcium electron-collecting electrodes. In this work, efficient OPV are demonstrated in which calcium electrodes were avoided by depositing a thin layer of the amine-containing nonconjugated polymer, polyethylenimine (PEIE), between the photoactive organic semiconductor layer and stable metal electrodes such as aluminum, silver, or gold. Devices with structure ITO/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/poly(3-hexylthiophene):indene-C60-bis-adduct (P3HT:ICBA)/PEIE/Al demonstrated overall photovoltaic device performance comparable to devices containing calcium electron-collecting electrodes, ITO/PEDOT:PSS/P3HT:ICBA/Ca/Al, with open-circuit voltage of 775±6 mV, short-circuit current density of 9.1±0.5 mA cm(-2), fill factor of 0.65±0.01, and power conversion efficiency of 4.6±0.3%, averaged over 5 devices at 1 sun.

Recyclable organic solar cells on cellulose nanocrystal substrates.

Solar energy is potentially the largest source of renewable energy at our disposal, but significant advances are required to make photovoltaic technologies economically viable and, from a life-cycle perspective, environmentally friendly, and consequently scalable. Cellulose nanomaterials are emerging high-value nanoparticles extracted from plants that are abundant, renewable, and sustainable. Here, we report on the first demonstration of efficient polymer solar cells fabricated on optically transparent cellulose nanocrystal (CNC) substrates. The solar cells fabricated on the CNC substrates display good rectification in the dark and reach a power conversion efficiency of 2.7%. In addition, we demonstrate that these solar cells can be easily separated and recycled into their major components using low-energy processes at room temperature, opening the door for a truly recyclable solar cell technology. Efficient and easily recyclable organic solar cells on CNC substrates are expected to be an attractive technology for sustainable, scalable, and environmentally-friendly energy production.

A universal method to produce low-work function electrodes for organic electronics.

Organic and printed electronics technologies require conductors with a work function that is sufficiently low to facilitate the transport of electrons in and out of various optoelectronic devices. We show that surface modifiers based on polymers containing simple aliphatic amine groups substantially reduce the work function of conductors including metals, transparent conductive metal oxides, conducting polymers, and graphene. The reduction arises from physisorption of the neutral polymer, which turns the modified conductors into efficient electron-selective electrodes in organic optoelectronic devices. These polymer surface modifiers are processed in air from solution, providing an appealing alternative to chemically reactive low-work function metals. Their use can pave the way to simplified manufacturing of low-cost and large-area organic electronic technologies.