Evaluation of the Effect of Common Analgesics on Pulpal Sensibility Tests: A Clinical Trial.

INTRODUCTION: Accurate diagnosis is one of the most important steps before endodontic treatment. The aim of this study was to assess the effect of 2 commonly used analgesics namely ibuprofen and acetaminophen on the cold and electric pulp test (EPT) results in participants with symptomatic irreversible pulpitis (SIP). METHODS: This clinical trial evaluated 41 participants with pain due to SIP. The cold test and EPT were performed for teeth with SIP, and also for the corresponding tooth with healthy pulp in the contralateral quadrant. The participants then received 500 mg acetaminophen, 400 mg ibuprofen, or the placebo in the 3 groups. The cold test and EPT were repeated at 20, 40, and 60 minutes after medication intake, and the results were compared with the pretreatment values. RESULTS: In the acetaminophen group, the results of cold test significantly decreased 40 (P < .05), and 60 (P < .05) minutes after analgesic intake in teeth with SIP and after 40 minutes (P < .05) in the corresponding contralateral teeth with healthy pulp. In the ibuprofen group, the cold test results significantly decreased at 20 (P < .05), 40 (P < .05), and 60 (P < .05) minutes after analgesic intake in teeth with SIP and after 40 minutes (P < .05) in the corresponding contralateral teeth with healthy pulp. The EPT results were not significantly affected by the studied analgesics at any time point (P > .05). There was no significant difference among the study groups regarding sex (P > .05). CONCLUSION: It appears that both acetaminophen and ibuprofen can affect the pulpal response to the cold sensibility test. However, the studied medications had no significant effect on the EPT results. Therefore, dental clinicians should be aware of the possible effects of such medications on the cold test response.

Evaluation of the relationship between buccolingual width of mesiobuccal root and root canal morphology of maxillary first molars by cone-beam computed tomography.

Background: One of the main reasons for the failure of root canal treatment is the incomplete knowledge of the root canal system. With respect to the complexity of maxillary molars root canal system, and the possibility of the relationship between the buccolingual width of the mesiobuccal root and root canal morphology in maxillary molars, the aim of this study is to determine this relationship with cone-beam computed tomography (CBCT). Materials and Methods: This in vitro study carried out on 311 CBCT scans. Maxillary first molars (n = 311) were evaluated in three sagittal, axial, and coronal planes. For each tooth the number of canals, presence of second mesiobuccal (MB2), buccolingual width of mesiobuccal root at the cementoenamel junction (CEJ), and mid-root level, and type of canals according to the Vertucci's classification were determined. Results: The results showed that 49.1% of first maxillary molars had 3 and 50.8% had four root canals. The most common canal type in the mesiobuccal root was Vertucci's Type I followed by Types II, IV, and V. The prevalence of MB2 in the Iranian subpopulation was 50.1%. In maxillary first molars with MB2, the buccolingual width of mesiobuccal root at the CEJ and mid-root level (P < 0.001) was significantly greater than the corresponding values in other one without MB2. Conclusion: The results showed that the buccolingual width of mesiobuccal root in maxillary first molars at the CEJ level and mid-root was correlated with the number of root canals.

Effect of Laser Irradiance and Fluoride Varnish on Demineralization Around Dental Composite Restorations.

Introduction: This study aimed to assess the effects of CO2 and erbium-doped yttrium aluminum garnet (Er:YAG) lasers with and without fluoride varnish on demineralization around composite restorations. Methods: This in vitro experimental study evaluated 96 extracted human premolars. After preparation and restoration of class V cavities in the buccal surface of the teeth with composite resin, they were randomly divided into 8 groups of control, CO2 laser (L1), CO2 laser-NaF (L1F), NaF-CO2 laser (FL1), Er:YAG laser (L2), Er:YAG laser-NaF (L2F), NaF-Er:YAG laser (FL2) and NaF (F). The entire surface of the teeth, except for the restored cavity in the buccal surface and 1 mm around the margin, was coated with two layers of nail varnish. The teeth then underwent pH cycling for 10 days (3 hours in demineralizing solution and 21 hours in remineralizing solution) to artificially induce demineralization. The amount of calcium and phosphorous released into the cariogenic solution was quantified using atomic absorption spectroscopy and spectrophotometry. The Vickers hardness tester was used to measure the hardness of the tooth structure adjacent to composite restoration. Data were analyzed using one-way ANOVA and Tukey's test. Results: The four groups of L1F, FL1, FL2 and L2F showed minimum loss of calcium and phosphorous ions, and the mean hardness of FL1 and FL2 groups was higher than that of other groups. Conclusion: The CO2 and Er:YAG lasers alone have no significant effect on the resistance of tooth structure to cariogenic solution. However, they can exert a synergistic effect when used along with NaF varnish. Fluoride varnish applied prior to laser irradiation confers further resistance to the tooth structure and positively affects its hardness.

Repair bond strength of composite: Effect of surface treatment and type of composite.

BACKGROUND: By an increase in use of composite restorations, some defects are also seen in these restorations, which need to be repaired. Since complete replacement of an old restoration may compromise the tooth structure, repair of defect is a more practical approach if there is no caries recurrence. Risk of pulp injury also decreases as such. One major challenge in restoration repair is to obtain a durable bond between the new and old composite. Laser irradiation has been suggested for surface preparation of old composite. This study aimed to assess the effect of composite surface preparation with Er,Cr:YSGG laser on microtensile bond strength to new composite. MATERIAL AND METHODS: A total of 18 blocks were fabricated in three groups of nanohybrid, microhybrid and Beautiful II giomer measuring 4x7x7 mm and subjected to 10,000 thermal cycles between 5-55°C with 30 seconds of dwell time. The samples were randomly assigned to no surface treatment (etching and bonding) or laser plus etching and bonding groups. Composite cylinders measuring 4x7x7 mm were fabricated of Beautiful, nanohybrid and microhybrid composites on old composite surfaces and subjected to 500 thermal cycles for 50 seconds between 5-55°C with 30 seconds of dwell time. Each block was sectioned into 10 samples and they were subjected to microtensile bond strength test. Data were analyzed using ANOVA and Tukey's test. RESULTS: In all composites, the mean bond strength in laser subgroups was higher than that in control subgroups except for giomer, which showed lower bond strength in laser subgroup. The lowest mean bond strength was noted in repair of Z350XT with Z350XT when the surface of old composite was etched (10.92 MPa). The highest mean bond strength was noted in repair of Z250 with giomer when the old composite surface was irradiated with laser (30.55 MPa). CONCLUSIONS: Er,Cr:YSGG laser plus etching increased the bond strength in all groups except for giomer group, which showed a reduction in bond strength. Key words:Composite resins, surface treatment, tensile bond strength, laser, er,cr:ysgg, giomer.

Effect of cement type and thickness on push-out bond strength of fiber posts.

Background. This study investigated the effect of the thickness of two resin cements on push-out bond strength of fiber posts to root dentin. Methods. Sixty decoronated single-rooted teeth were endodontically treated. The specimens were then randomly allocated to two groups (n=30); group 1: drill size 90 w, matching the size of fiber posts used; group 2: drill size 110, larger than the posts. The specimens in each group were divided into 2 subgroups (n=15); subgroup SE, in which the posts were cemented with self-etch Panavia F2.0 and subgroup SA, in which self-adhesive Panavia cement was used. After 72 hours, 2 slices with 1 mm of thickness were prepared from the mid-root of each specimen. Push-out bond strength test was performed in a universal testing machine at a crosshead speed of 1 mm/min. Data were analyzed with two-way ANOVA and t-test. Results. The mean bond strengths of the posts cemented in matched-size spaces for SE and SA groups were 4.02±1.6 and 4.12±2.3 MPa, respectively. For posts cemented in oversized spaces, the values were 4.9±2.3 and 2.8±1.3 MPa, respectively. In matched-size spaces, there was no significant difference between the two groups. Conclusion. The results of this study suggested that increasing the cement thickness would reduce the bond strength of fiber posts to root dentin when self-adhesive cements are used; however, self-etch adhesives were not affected.

Antibacterial Efficacy of Calcium Hydroxide and Chlorhexidine Mixture for Treatment of Teeth with Primary Endodontic Lesions: A Randomized Clinical Trial.

INTRODUCTION: This study compared the root canal microbial count of necrotic teeth after irrigation with 6% sodium hypochlorite (NaOCl) (single session treatment) and two-session root canal treatment with two-week application of calcium hydroxide (CH) mixed with 0.2% chlorhexidine (CHX) as intracanal medicament. METHODS AND MATERIALS: In this randomized clinical trial, single-rooted necrotic teeth were divided into two groups. Root canal was irrigated with 2 mL of 6% NaOCl in one group, and a mixture of 0.2% CHX and CH powder as an intracanal medicament for two weeks, in the other group. Root canal samples were obtained before and after the intervention and number of colony forming units (CFUs) was counted in each phase. RESULTS: The reduction of Enterococcus faecalis CFU was not significantly different between the two groups (P=0.233) but the CFU of aerobic and anaerobic bacteria was significantly lower in CH+CHX group (P<0.001). CONCLUSION: Two-week application of CH+CHX caused significant reduced the aerobic, anaerobic and E. faecalis colony counts. Thus, it may be beneficial to carry out primary root canal treatment of necrotic teeth with endodontic lesions in two sessions with intracanal medicaments to achieve predictable results.

The in Vitro Antibacterial Efficacy of Persian Green Tea Extract as an Intracanal Irrigant on Enterococcus faecalis Biofilm.

INTRODUCTION: The aim of this study was to compare the antibacterial effect of Persian green tea extract (GTE) and 2.5% sodium hypochlorite (NaOCl) against Enterococcus faecalis (E. faecalis) as an intracanal irrigant. METHODS AND MATERIALS: Thirty freshly extracted teeth were instrumented and sectioned into mesial and distal segments. The specimens were put into wells containing 2 mL of E. faecalis-containing medium. After 3 weeks, the specimens were removed and divided randomly into three groups (n=20). Each group was exposed to 3 mL of different irrigants for 3 min. Groups 1, 2 and 3 were irrigated with GTE, 2.5% NaOCl and normal saline, respectively. Biofilm formed in the middle third of the root canal was carved by sterile scalpel and cultured in Mueller-Hinton medium. Number of colony forming units (CFU) was counted on each plate. In addition, antimicrobial activity of the irrigants was evaluated by the agar disc diffusion test. The diameter of inhibition zone (IZ) around each irrigant was evaluated. The Kruskal-Wallis and Dunn tests were used to analysis the data. RESULTS: While in NaOCl group no bacterial colonies were observed, the mean number of E. faecalis in GTE and control groups were 275±74 CFU/mL (P<0.001) and 119×108±11×108 (P<0.001), respectively. The mean of IZ in NaOCl and GTE groups were 24.35±0.78 and 6.9±0.87 mm, in order of appearance (P<0.001). Zone of inhibition was not observed around the control group (P<0.001). CONCLUSION: This research highlighted the potential role of plant extracts in antimicrobial root canal irrigation protocol.

Traditionally used herbal medicines with antibacterial effect on Aggegatibacter actinomycetemcomitans: Boswellia serrata and Nigella sativa.

BACKGROUND: Since bacterial strains developed resistance against commonly used antibiotics and side effects became more serious, other alternatives have been postulated. There is an answer for this issue in ancient medicine. Many plants have been proved to provide antibacterial effect. In this study, Boswellia serrata (BS) and Nigella sativa (NS) were assessed to evaluate the antibacterial effect on Aggregatibacter actinomycetemcomitans (A.a) known as main pathogen of aggressive periodontitis. MATERIALS AND METHODS: Broth microdilution method was used to obtain minimum inhibitory concentration (MIC) of crude extract of BS and NS. Furthermore, the logarithm of colony forming units grown in fresh brain heart infusion bacterial culture was assessed. Three groups including BS+ (containing only BS), NS+ (containing only NS), and BS-NS- (control group) were defined. For each group, the experiment was repeated 12 times. RESULTS: MIC of BS and NS were 512 µg/mL and 128 µg/mL, respectively. No growth was observed in our negative control group. The mean ± standard deviation of logarithm of CFU/mL for BS, NS, and control group was 4.32 ± 0.36, 3.61 ± 0.3, and 5.57 ± 0.19, respectively. ANOVA test revealed significant difference (P values < 0.0001) of these groups which was later confirmed using the post hoc test of Tukey's honest significant difference (all P < 0.0001). CONCLUSIONS: Both BS and NS are effective against A.a which should be taken into account as appropriate ingredient for oral hygiene products.