Plastic fats from sal, mango and palm oil by lipase catalyzed interesterification.

Speciality plastic fats with no trans fatty acids suitable for use in bakery and as vanaspati substitute were prepared by interesterification of blends of palm stearin (PSt) with sal and mango fats using Lipozyme TLIM lipase as catalyst. The blends containing PSt/sal or PSt/mango showed short melting range and hence are not suitable as bakery shortenings. Lipase catalysed interesterification extended the plasticity or melting range of all the blends. The blends containing higher proportion of PSt with sal fat (50/50) were harder having high solids at and above body temperature and hence cannot be used as bakery shortenings. The blends with PSt/sal (30-40/60-70) after interesterification showed melting profiles similar to those of commercial hydrogenated bakery fats. Similarly, the blends containing PSt/mango (30-40/60-70) after interesterification also showed melting profiles similar to those of commercial hydrogenated shortenings. The slip melting point and solidification characteristics also confirm the plastic nature of these samples. The improvement in plasticity after interesterification is due to formation of higher melting as well as lower melting triglycerides during lipase catalysed interesterification.

Shelf-life study of Indian traditional food based nutraceutical (oryzanol) enriched instant mixes Bhath-OZ and Upma-OZ.

To provide nutraceutical such as oryzanol through food, two instant mixes based on the Indian traditional food cuisine Bisibele bhath and Upma(Bhath-OZ and Upma-OZ) were developed and evaluated for shelf-life. The formulations contained cereals, pulses, and spices along with oryzanol enriched oil and were packed in 200gauge/50 gauge metallized polyester packaging material and stored under ambient (27 °C 65%RH) and accelerated conditions (37 °C/92%RH). Samples were withdrawn periodically and peroxide value (PV), free fatty acid value (FFA), fatty acid composition, oryzanol, and total tocopherols content were estimated. Sensory evaluation of reconstituted products was also carried out. Oryzanol content (610 and 550 mg%) did not change appreciably in Bhath-OZ and Upma-OZ respectively. The peroxide value under ambient condition increased from 1.1 to 9.3 meq.O2/kg and 2.24 to 9.02 meq.O2/kg during the 6 month storage study at 27 °C and 65% RH, while under accelerated conditions at 37 °C and 92%RH, it increased from 1.12 to 8.54 meq. O2/kg and 2.24 to 6.96 meq. O2/kg during 2 month storage period. Bhath-OZ and Upma-OZ packed in metallized polyester pouches stored at 27 °C and 65% RH had a shelf-life of 4 months without affecting the oryzanol content and quality of instant mixes during the storage period.

Physico-chemical characteristics of burfi prepared by using medium chain triglyceride rich margarines.

Medium chain triglyceride rich margarines were prepared using palm, coconut oil blends in the ratio of 80:20 (Margarine 1) and 60:40 (Margarine 2). The margarines were used to prepare burfi and compared with products prepared using commercial margarine, ghee and butter. The physicochemical characteristics such as texture, color, free fatty acid, peroxide value, saponification value, unsaponifiable matter and fatty acid composition of oils, fats and margarines were carried out. Results showed that 11.0 and 21.9% of medium chain triglycerides were present in margarine 1 and 2 respectively. The texture, colour, moisture content, peroxide value and sensory evaluation were carried out for the burfi samples. Laboratory prepared margarines improved the textural quality of burfi compared to commercial margarine, ghee and butter. The sensory analyses of the burfi samples revealed that burfi prepared from margarine 1 was more acceptable compared to commercial margarine.

Thermal degradation of groundnut oil during continuous and intermittent frying.

The quality of refined groundnut oil, as affected by frying Poori, was assessed with respect to two types of frying operations viz., continuous frying and intermittent frying. Continuous frying was carried out consistently for 8 h, whereas intermittent frying was performed for 2 h everyday for 4 days for a total of 8 frying hours. The purpose of the study was to compare the level of deterioration that occurred during the two operations. Among the parameters studied, peroxide value (11.3 ± 0.26 meqO2/kg), anisidine value (172.4 ± 2.71), diene value (1.57 ± 0.095), oxidized fatty acid (2.6 ± 0.17%) and viscosity (103.8 ± 2.5 mPa s(-1)), were found to be higher after 8 h due to intermittent frying. The corresponding values 4.9 ± 0.15, 133.3 ± 0.49, 0.811 ± 0.04, 0.38 ± 0.023 and 81.8 ± 2.02 were observed in continuous frying. Parameters such as iodine value, unsaturated fatty acids, saponification value and smoke point decreased significantly (P < 0.5) due to intermittent frying. Results showed that intermittent frying caused more quality degradation to GNO than continuous frying.

Studies on chemical and sensory parameters of coconut oil and its olein blends with sesame oil and palmolein during wheat flour-based product frying.

Blends of coconut oil-coconut oil with sesame oil (blend 1); coconut olein with sesame oil (blend 2); coconut olein with palmolein (blend 3) in 1:1 (v/v) ratio-were used in this study for frying Poori, a traditional Indian fast food prepared from wheat flour. Changes in oil quality were determined by chemical and sensory methods. Free fatty acid content did not change whereas peroxide value increased. Anisidine value increased from 5.5, 0.9 and 4.2 to 34.3, 42.8 and 23.6 for blends 1, 2 and 3, respectively. Iodine value showed marginal decrease in blends 1 and 2. Diene value showed no change in all three blends. Sesamol content in blends 1 and 2, total tocopherols in all the three blends, and ß-carotene content in blend 3 decreased after frying. The blends showed a significant decrease (P ≤ 0.05) in the characteristic coconut oil odour after frying. Blend 3 showed comparatively better frying stability and also overall sensory quality of poori fried in this blend was the highest.