RESUMO
Rapid microwave sintering of different oxide ceramics with heating rates up to 300 °C/min and zero hold time has been implemented using a 24 GHz gyrotron-based system for high-temperature processing of materials. The design of the system, principle of operation, and process control are described. Particular attention is given to the design of thermal insulation assemblies and the implementation of temperature measurement in an environment with intense electromagnetic fields. A description of an optical system for dilatometry and temperature measurement is presented. The interrelation between the automatically regulated output power of the gyrotron and the microwave power absorbed volumetrically in the sample is analyzed on the basis of energy balance considerations. The analysis is illustrated by considering examples of rapid sintering processes with ZnO-based and BaTiO3 ceramic samples making use of direct and susceptor-assisted microwave heating. It is demonstrated that an increase in the volumetrically absorbed power leads to the development of a controlled thermal instability, which results in a lower temperature of the densification onset.
RESUMO
A 263 GHz continuous-wave (CW) gyrotron was developed at the IAP RAS for future applications as a microwave power source in Dynamic Nuclear Polarization / Nuclear magnetic resonance (DNP/NMR) spectrometers. A new experimental facility with a computerized control was built to test this and subsequent gyrotrons. We obtained the maximum CW power up to 1 kW in the 15 kV/0.4 A operation regime. The power about 10 W, which is sufficient for many spectroscopic applications, was realized in the low current 14 kV/0.02 A regime. The possibility of frequency tuning by variation of the coolant temperature about 4 MHz/1 °C was demonstrated. The spectral width of the gyrotron radiation was about 10(-6).
