The potential of pulsed electromagnetic field-generated shock waves for reducing microbial load and improving homogenization in raw milk.

Milk is a highly nutritious food essential for human consumption. However, traditional thermal processing methods can reduce its nutritional value and cause unwanted changes. The use of shock waves produced by pulsed electromagnetic fields (PEMFs) has been explored as a means to reduce pathogenic microorganisms. The effect of shock wave treatment on microbial load and particle distribution in packaged fresh cow's milk was investigated. Additionally, the impact of shock wave treatment on Salmonella enterica counts in a bacterial suspension of phosphate-buffered saline (PBS) was evaluated, as this bacterium is a significant milkborne pathogen. Treatment with 1000 impulses from an electromagnetic shock wave generator resulted in a 0.7-log reduction in the total bacterial count of milk. In a separate experiment, a 300-impulse shock wave treatment applied to a Salmonella enterica suspension achieved a 3-log reduction in bacterial counts. Furthermore, shock wave treatment resulted in a decrease in milk particle size compared to untreated milk. Notably, the volume of milk used in this study aligns with commercially available packaged products, enhancing the experiment's industrial relevance. The use of PEMF to generate shock waves could provide a novel approach for future studies focused on reducing the microbial load of milk and improving its homogenization.

Continuous decontamination of cumin seed by non-contact induction heating technology: Assessment of microbial load and quality changes.

Over the past few decades, the demand for high-quality food has increased steadily. Therefore, it is essential to develop innovative technologies that effectively reduce microbial load while minimizing any negative effect on the quality of spices. The objective of this study was to determine the efficacy of a self-designed non-contact induction heating system using contaminated cumin seeds. The non-contact induction heating decontamination process was performed at different temperatures of 115, 135 and 155°C and durations (45, 60 and 75 s) through continuous process (screw conveyor) in Pyrex cylinder chamber. Various parameters including microbial load, color characteristics, essential oil content, surface morphology, sample temperature, and energy consumption were analyzed as dependent variables in the study. The results showed that the treatment combination (155°C - 60 s) reduced the aerobic plate count from 6.21 to 2.97 CFU/g. Mold, yeast and coliforms in the treatment combination (155°C-45 s) were also reduced by 3.26 and 3.6 CFU/g, respectively. The total color difference of the samples increased due to the degradation and alteration of pigments at high temperatures. However, no statistically significant disparity in essential oil content was observed between the treatment groups and the control group. The quantities of essential oil components in the cumin seeds were determined to align with the ISO standard, with the primary constituents identified as follows: Terpinen-7-al γ (38.98%), Cumin aldehyde (20.75%), γ-Terpinene (18.81%), ß-Pinene (13.66%), and p-Cymene (6.2%). In summary, non-contact induction heating system shows promise as an effective technology for surface decontamination of spices. The acquired findings contribute to a deeper understanding of the impact of the induction heating process on both the microbial contamination levels and the quality attributes of cumin seeds. This scientific knowledge serves as a foundational framework for the prospective adoption and integration of this technology on a larger industrial scale.

Cold atmospheric pressure air plasma jet disinfection of table eggs: Inactivation of Salmonella enterica, cuticle integrity and egg quality.

Eggshell cuticles are first lines of defense against egg-associated pathogens, such as Salmonella enterica serovar Enteritidis (SE). Infections from eggs contaminated with this strain remain a significant risk. In addition, changes in the cuticle are closely related to changes in egg safety. The emerging non-thermal atmospheric pressure plasma technology enables a high rate of microbial inactivation at near-ambient temperatures, making it ideal for food safety applications. This study examines the effects of a cold atmospheric pressure air plasma jet (CAAP-J) on eggshell cuticle and egg quality whilst inactivating SE. Shell eggs inoculated with SE (7 log10 cfu/egg) were used as the samples to test the decontamination performance of the device. The tests were conducted using an industrial CAAP-J with different power levels (600-800 W), exposure times (60-120 s), at a fixeddistance of 20 mm from the plasma jet and an air flow rate of 3600 L/h. It was found that the best results were obtained after 120 s at maximum plasma power (800 W). Subsequent to the implementation of this plasma procedure, it was determined that no viable cells could be detected. After CAAP-J treatment, the temperature remains below 50.5 °C, thereby minimizing the risk of altering egg quality. All specific measurements (egg white pH, yolk pH, yolk color, HU, and eggshell breaking strength) have shown that CAAP-J treatment has no negative effect on egg quality. No changes in eggshell cuticle quality after CAAP-J treatment was confirmed through scanning electron microscope (SEM).

Decontamination technologies for medicinal and aromatic plants: A review.

Microbial quality assurance has always been an important subject in the production, trade, and consumption of medicinal and aromatic plants (MAPs). Most MAPs have therapeutic and nutritional properties due to the presence of active substances such as essential oils, flavonoids, alkaloids, etc. However, MAPs can become infected with microorganisms due to poor hygienic conditions during cultivation and postharvest processes. This problem reduces the shelf life and effective ingredients of the product. To overcome these problems, several technologies such as using ethylene oxide gas, gamma irradiation, and steam heating have been used. However, these technologies have disadvantages such as the formation of toxic by-products, low consumer acceptance, or may have a negative effect on the quality of MAPs. This requires a need for novel decontamination technology which can effectively reduce the biological contamination and minimize the food quality losses. In recent years, new technologies such as ozonation, cold plasma, ultraviolet, infrared, microwave, radiofrequency and combination of these technologies have been developed. In this review, biological contamination of MAPs and technologies used for their decontamination were studied. Also, the mechanism of inactivation of microorganisms and the efficacy of decontamination techniques on the qualitative and microbial characteristics of MAPs were investigated.

Effect of desiccant system on thin layer drying kinetics of corn.

Drying is one of the most important post-harvest processes for reducing the moisture content of agricultural products and improving their performance has obvious benefits. Most dryers are convective type in which hot air is used for reduction of product moisture content. Effect of adding a desiccant unit to a re-circulating convective dryer on thin layer drying kinetics of corn kernels is reported here. The influence of the desiccant unit, drying temperature and flow rate on drying time, moisture diffusivity coefficient and reactivation energy were investigated. The experiments were conducted at air temperatures of 50, 60 and 70 °C and flow rates of 1, 1.4 and 1.8 kg/min with and without the desiccant unit. Results showed that the use of the desiccant wheel decreased drying time by 9.75% and increased drying rate by 7.85%. Application of a Logarithmic model for fitting the data, while being simple, resulted in good statistical indexes (R2 and RMSE). Moisture diffusivity coefficient was obtained to be in the 3.47258 × 10-11 to 8.18826 × 10-11 m2/s range, while activation energy varied between 14.2931 and 17.6770 kJ/mol on the average. Therefore, utilization of the desiccant unit accelerates moisture extraction from corn samples.

Design, development and evaluation of an automatic fruit-juice pasteurization system using microwave - ultrasonic waves.

Conventional pasteurization treatments often lead to substantial decrease in fruits juice quality. Due to these issues, the objective of this research was to compare the combined effect of a novel thermal (microwave) and non-thermal (ultrasonic) treatments with conventional thermal pasteurization on some qualitative characteristics of sour cherry juice (vitamins, phenolics, anthocyanins, etc.). For this purpose, an automatic control system comprising of ultrasonic generator, ultrasonic transducer, horn, pump, circulator, microwave oven, container, pipe interface, temperature sensor, float, data acquisition card, microwave power control circuit, and reactor was designed and developed. Moreover, in order to optimize the effect of ultrasonic waves on the existing micro-organisms in the sour cherry juice, some preliminary experiments were carried out to optimize the ultrasonic probe and reactor design. The results of evaluations showed that using the combined automatic system, the qualitative properties of sour cherry (vitamin C content 14 %, total phenolics content 1 %, total anthocyanins content 6 %) can be better maintained compared with the conventional thermal method. Based on the results obtained in this study, the following processing conditions: microwave power of 541.7 W, temperature of 41 °C, ultrasonic power of 799.57 W and ultrasonic exposure time of 6 min were recommended for optimum processing of sour cherry juice.

Effects of microwave - fluidized bed drying on quality, energy consumption and drying kinetics of soybean kernels.

Moisture content of soybean kernel at harvest time is too high for storage, and needs to be reduced. In this research, drying characteristics, quality and energy requirement for microwave-fluidized bed drying of soybean kernels were studied. The results showed that air temperature (80-140 °C), velocity (1.8-4.5 m/s) and microwave power (200-500 W) significantly influenced drying time, moisture diffusivity, rehydration capacity, cracking, and specific energy consumption (P ≤ 0.05). Among the applied models, Page's model has the best performance to estimate the microwave-fluidized bed drying behavior of the soybean kernels. Moisture diffusivity values increased (6.25 × 10(-10) to 42.14 × 10(-10) m(2)/s) as the air velocity decreased and air temperature and microwave power increased. Activation energy was foundto be between 3.33 and 17.70 kJ/mol. Minimum cracking percentage of soybean kernels (12.96 %) was obtained at 80 °C, 1.8 m/s and 200 W treatments. The increase in microwave power and decrease in air velocity level decreased the rehydration capacity. Specific energy consumption varied from 50.94 to 338.76 MJ/kg water and the lowest specific energy consumption were obtained at 80 °C, 4.5 m/s and 500 W.