Three-Dimensional Printing of Lignocellulose Structures: Improving Mechanical Properties and Shape Fidelity.

Additive manufacturing of nanocellulose (NC) materials is an emergent technological domain that facilitates the fabrication of complex and environment-friendly structures that mitigate greenhouse gas emissions. However, printing high concentrations of NC into intricate structures encounters substantial challenges due to inadequate adhesion between the printed layers attributed to a high cellulose solid content, resulting in low shape fidelity and mechanical properties. Therefore, to address these challenges, this paper reports lignin (LG) blending, a nanofiller, in high-content NC (>25 wt % solid content) paste to improve the layer adhesion of three-dimensional (3D) printed structures. The printed structures are dried in a clean room condition followed by postcuring. The optimized lignocellulose (0.5LG-NC) paste showed high structural shape fidelity, remarkable flexural strength, and moduli of 102.93 ± 0.96 MPa and 9.05 ± 0.07 GPa. Furthermore, the volumetric shrinkage behavior in box-like 3D printed structures with optimized LG-NC paste shows low standard deviations, demonstrating the repeatability of the printed structures. The study can be adapted for high-performance engineering and biomedical applications to manufacture high mechanical strength environment-friendly structures.

Natural peloids originating from subsea depths of 200 m in the hupo basin, South Korea: physicochemical properties for potential pelotherapy applications.

The present study firstly reports surface sediment from the subsea depth of 200 m as a potential natural peloid. The fine-silt sediment exhibited a consistent clay mineral composition dominated by illite, chlorite, kaolinite, and diatomite. The most abundant clay mineral was illite/mica, with other minerals loosely packed in a face-to-face orientation. The thermal conductivity, specific heat capacity, and cation-exchange capacity of the sediment were in the range 0.855-0.885 W/m K, 2.718-2.821 J/g °C, and 23.06-32.96 cmol/kg, respectively. The concentrations of most toxic elements in the sediment were considerably lower than the limits set by domestic cosmetic regulations and other international standards. The analyzed samples exhibited similar properties to those of previously reported peloids, thus making them suitable for use in the field of pelotherapy; furthermore, the consistency in data across a wide peloid-distribution area is expected to enable economically viable mining. Future investigations should aim to to evaluate the long-term effects on the skin, the bioavailability of potentially hazardous substances, and the therapeutic efficacy for various skin conditions.

Application of Palliative Hemostatic Radiotherapy in Canine Unresectable Oral Melanoma: A Case Report.

A 9-year-old castrated male Schnauzer dog, weighing 11.6 kg, presented with a persistent hemorrhagic oral mass. An oral examination revealed a right maxillary oral mass characterized by continuous bleeding, halitosis, and severe pain. A cytological examination led to a provisional diagnosis of malignant melanoma, and, despite the option of aggressive surgery, the owner declined. The blood analysis indicated severe hemorrhagic anemia (hematocrit, 18.2%) requiring a blood transfusion. The patient underwent volumetric modulated arc therapy (VMAT) as part of a palliative radiation protocol, receiving six fractions of 6 Gy weekly for hemostasis and clinical improvement. The hemorrhaging ceased after the second fraction, with a subsequent rise in the hematocrit levels and the resolution of the anemia. Additionally, the intake increased following the second fraction, and effective pain management was achieved in the fourth fraction. Following the last fraction, computed tomography revealed a 20% reduction in the tumor size. This case highlights the potential use of radiotherapy for hemostasis in cases of inoperable hemorrhagic oral melanoma and represents the first report on the application of hemostatic radiotherapy in dogs.

Case Series: Computed Tomography Features of Extraskeletal Osteosarcoma in Six Dogs.

The objective of the present case series was to investigate the various computed tomography findings of six dogs diagnosed with extraskeletal osteosarcoma (exOSA) at several locations. Among the tumors evaluated, four were subcutaneous, one was mammary, and one involved the intestinal tract. Intralesional mineralization was observed in all six dogs. Most of the tumors were moderately calcified, exhibited amorphous mineralization, and were heterogeneous on post-contrast imaging. Three of the tumors were peripherally enhanced, and regional lymphadenopathy was identified in two of the dogs, which was presumed to be metastatic. No lymph node calcification was reported. Although the presence of intralesional mineralization is not a pathognomonic finding, it was consistently identified in the present case series. Therefore, exOSA should be considered in the differential diagnosis when mineralization occurs in a mass unrelated to osseous structures.

Redox-Active Organic Materials: From Energy Storage to Redox Catalysis.

Electroactive materials are central to myriad applications, including energy storage, sensing, and catalysis. Compared to traditional inorganic electrode materials, redox-active organic materials such as porous organic polymers (POPs) and covalent organic frameworks (COFs) are emerging as promising alternatives due to their structural tunability, flexibility, sustainability, and compatibility with a range of electrolytes. Herein, we discuss the challenges and opportunities available for the use of redox-active organic materials in organoelectrochemistry, an emerging area in fine chemical synthesis. In particular, we highlight the utility of organic electrode materials in photoredox catalysis, electrochemical energy storage, and electrocatalysis and point to new directions needed to unlock their potential utility for organic synthesis. This Perspective aims to bring together the organic, electrochemistry, and polymer communities to design new heterogeneous electrocatalysts for the sustainable synthesis of complex molecules.

Phloroglucinol Derivatives Exert Anti-inflammatory Effects and Attenuate Cognitive Impairment in LPS-induced Mouse Model.

Neuroinflammation is an inflammatory immune response that arises in the central nervous system. It is one of the primary causes of neurodegenerative diseases, such as Alzheimer's disease and Parkinson's disease. Phloroglucinol (PG) is a natural product contained in extracts of plant, algae and microbe and has been reported to have antioxidant and anti-inflammatory properties. In this study, we synthesized PG derivatives to enhance their antioxidant and anti-inflammatory activity. Among PG derivatives, 6a suppressed pro-oxidative and inflammatory molecule nitric oxide (NO) production more effectively than PG. Moreover, 6a dose-dependently reduced the expression of proinflammatory cytokines such as IL-6, IL-1ß, TNF-α, and NO producing enzyme iNOS in lipopolysaccharide (LPS)-stimulated BV-2 microglial cells. Additionally, we confirmed that 6a alleviated cognitive impairment and glial activation in mouse model of LPS-induced neuroinflammation. These findings suggest that novel PG derivative, 6a, is a potential treatment for neurodegenerative diseases.

A wirelessly programmable, skin-integrated thermo-haptic stimulator system for virtual reality.

Sensations of heat and touch produced by receptors in the skin are of essential importance for perceptions of the physical environment, with a particularly powerful role in interpersonal interactions. Advances in technologies for replicating these sensations in a programmable manner have the potential not only to enhance virtual/augmented reality environments but they also hold promise in medical applications for individuals with amputations or impaired sensory function. Engineering challenges are in achieving interfaces with precise spatial resolution, power-efficient operation, wide dynamic range, and fast temporal responses in both thermal and in physical modulation, with forms that can extend over large regions of the body. This paper introduces a wireless, skin-compatible interface for thermo-haptic modulation designed to address some of these challenges, with the ability to deliver programmable patterns of enhanced vibrational displacement and high-speed thermal stimulation. Experimental and computational investigations quantify the thermal and mechanical efficiency of a vertically stacked design layout in the thermo-haptic stimulators that also supports real-time, closed-loop control mechanisms. The platform is effective in conveying thermal and physical information through the skin, as demonstrated in the control of robotic prosthetics and in interactions with pressure/temperature-sensitive touch displays.

Selective adsorption of fluorinated super greenhouse gases within a metal-organic framework with dynamic corrugated ultramicropores.

Perfluorocompound (PFC) gases play vital roles in microelectronics processing. Requirements for ultra-high purities traditionally necessitate use of virgin sources and thereby hinder the capture, purification, and reuse of these costly gases. Most importantly, gaseous PFCs are incredibly potent greenhouse gases with atmospheric lifetimes on the order of 103-104 years, and thus any environmental emissions have an outsized and prolonged impact on our climate. The development of sorbents that can capture PFC gases from industrial waste streams has lagged substantially behind the progress made over the last decade in capturing CO2 from both point emission sources and directly from air. Herein, we show that the metal-organic framework Zn(fba) (fba2- = 4,4'-(hexafluoroisopropylidene)bis-benzoate) displays an equilibrium selectivity for CF4 adsorption over N2 that surpasses those of all water-stable sorbents that have been reported for this separation. Selective adsorption of both CHF3 and CH4 over N2 is also evident, demonstrating a general preference for tetrahedral C1 gases. This selectivity is enabled by adsorption within narrow corrugated channels lined with ligand-based aryl rings, a site within this material that has not previously been realized as being accessible to guests. Analyses of adsorption kinetics and X-ray diffraction data are used to characterize sorption and diffusion of small adsorbates within these channels and strongly implicate rotation of the linker aryl rings as a gate that modulates transport of the C1 gases through a crystallite. Multi-component breakthrough measurements demonstrate that Zn(fba) is able to resolve mixtures of CF4 and N2 under flow-through conditions. Taken together, this work illuminates the dynamic structure of Zn(fba), and also points toward general design principles that can enable large CF4 selectivities in sorbents with more favorable kinetic profiles.

Cross-Cultural Validation and the Psychometric Properties of the Korean Version of the Brief Religious Coping Scale.

This study examined the psychometric properties of the Korean version of the Brief Religious Coping Scale (RCOPE) among Korean Protestant Christians to determine its reliability and validity in South Korea considering the unique characteristics of Korean Protestant Christianity. Exploratory Factor Analysis (n = 251) and confirmatory factor analysis (n = 268) identified the original two-factor structure of the positive and negative religious coping subscales. Also, the scale exhibited robust reliability and construct validity. This study affirmed the scale is a valid and reliable instrument for measuring religious coping in Korean Christian adults.

Ginsenoside Rb1 alleviates lipopolysaccharide-induced inflammation in human dental pulp cells via the PI3K/Akt, NF-κB, and MAPK signalling pathways.

AIM: Among numerous constituents of Panax ginseng, a constituent named Ginsenoside Rb1 (G-Rb1) has been studied to diminish inflammation associated with diseases. This study investigated the anti-inflammatory properties of G-Rb1 on human dental pulp cells (hDPCs) exposed to lipopolysaccharide (LPS) and aimed to determine the underlying molecular mechanisms. METHODOLOGY: The KEGG pathway analysis was performed after RNA sequencing in G-Rb1- and LPS-treated hDPCs. Reverse-transcription polymerase chain reaction (RT-PCR) and western blot analysis were used for the assessment of cell adhesion molecules and inflammatory cytokines. Statistical analysis was performed with one-way ANOVA and the Student-Newman-Keuls test. RESULTS: G-Rb1 did not exhibit any cytotoxicity within the range of concentrations tested. However, it affected the levels of TNF-α, IL-6 and IL-8, as these showed reduced levels with exposure to LPS. Additionally, less mRNA and protein expressions of vascular cell adhesion molecule-1 (VCAM-1) and intercellular adhesion molecule-1 (ICAM-1) were shown. With the presence of G-Rb1, decreased levels of PI3K/Akt, phosphorylated IκBα and p65 were also observed. Furthermore, phosphorylated ERK and JNK by LPS were diminished within 15, 30 and 60 min of G-Rb1 exposure; however, the expression of non-phosphorylated ERK and JNK remained unchanged. CONCLUSIONS: G-Rb1 suppressed the LPS-induced increase of cell adhesion molecules and inflammatory cytokines, while also inhibiting PI3K/Akt, phosphorylation of NF-κB transcription factors, ERK and JNK of MAPK signalling in hDPCs.

In situ Synthesis of Single Layered Metal-Organic Frameworks via Inkjet Printing on a Cellulose Nanofiber Film.

The inkjet printing is a simple method to develop pattern-controlled 2D metal-organic frameworks (MOFs) due to its cost-effectiveness and ease of operation. Despite the sophisticated structures of MOF crystals, the MOF surfaces are easily contaminated by the adsorption of an ink solution, and the printing nozzle can be clogged by the aggregates of MOFs during printing. Unlike the mixture inks of MOFs and a carrier medium, the surface-specific patterning by in situ synthesis provides the film surface with the controlled patterns of an MOF single layer having different morphologies of MOFs without changing the ink cartridges. It enables facile printing due to the low viscosity of inks and escapes the risk of nozzle clogging because MOFs are synthesized at the printed patterns on the substrates. The ion-exchanged cellulose nanofiber (CNF) films form strong coordination with metal ions enhancing the stability of the MOFs on the film surface. It also demonstrates the controlled coverage of the MOFs by the printing pass number and the carboxylate content of CNF and the tunable adsorption of the guest molecules for different loading capacities of the printed patterns.

Injection rate, scanning position, and values of parameters on pulmonary computed tomography perfusion in normal Beagles.

OBJECTIVE: This study evaluated the effects of scanning position and contrast medium injection rate on pulmonary CT perfusion (CTP) images in healthy dogs. ANIMALS: 7 healthy Beagles. METHODS: Experiments involved 4 conditions: dorsal and sternal recumbency at 2.5 mL/s (first) and sternal recumbency with additional rates of 1.5 and 3.5 mL/s (second). Various parameters, including the initial time of venous enhancement (Tv), peak time of arterial enhancement (PTa), and peak enhancement values of the artery, were measured. The PTa to Tv interval was calculated. Perfusion mapping parameters (pulmonary blood flow, pulmonary blood volume, mean transit time, time to maximum, and time to peak) were determined in different lung regions (left and right dorsal, middle, and ventral). RESULTS: There are significant variations in most perfusion mapping parameters based on the pulmonary parenchymal location. Dorsal recumbency had a lower peak value of arterial enhancement than sternal recumbency. Pulmonary blood flow in the dorsal region and mean transit time and time to maximum in all regions showed no significant differences based on position. Pulmonary blood volume and time to peak varied with scanning position. The PTa to Tv interval did not differ based on the injection rate, but the injection time at 1.5 mL/s was longer than at other rates. All perfusion mapping parameters of the ventral region increased with higher injection rates. CLINICAL RELEVANCE: The recommended CTP imaging approach in dogs is a low injection rate of 1.5 mL/s in the sternal recumbency. This study provides reference ranges for perfusion parameters based on the pulmonary parenchymal location, contributing to the acquisition and application of pulmonary CTP images for differential diagnosis in small-breed dogs.

Prognostic Value of Mitral Annular Calcification in Liver Transplant Patients: Implication in Posttransplant Outcomes.

BACKGROUND: With the rise of metabolic diseases and aging in liver transplant (LT) candidates, mitral annular calcification (MAC) is more recognizable. Despite cardiovascular risk becoming a leading cause of mortality in LT recipients, the influence of MAC remains unexamined. This study investigates the prevalence, related factors, and impact of MAC on LT outcomes. METHODS: We explored 4148 consecutive LT patients who underwent routine pretransplant echocardiography from 2008 to 2019. Multivariate logistic analysis and the tree-based Shapley additive explanation scores in machine learning were used to evaluate the significant and important related factors. The primary outcome was 30-d major adverse cardiac events (MACE), and the secondary outcome was a median of 5-y cumulative all-cause mortality. RESULTS: MAC was found in 123 (3.0%) patients. Significant and important related factors included age, alcoholic liver disease, chronic kidney disease, hyperuricemia, hypertension, and coronary artery disease. The MACE rate was higher in patients with MAC compared with those without MAC at 30 d (P < 0.001, adjusted hazard ratio 1.67; 95% confidence interval, 1.08-2.57). Patients with MAC had poorer cumulative overall survival probability compared with those without MAC (P = 0.0016; adjusted hazard ratio 1.47; 95% confidence interval, 1.01-2.15). Specifically, women with MAC had a poorer survival probability compared with men without MAC (65.0% versus 80.7%, P < 0.001) >10 y post-LT. CONCLUSIONS: The presence of MAC before LT was linked to increased 30-d MACE and lower long-term survival rates, especially in women. Identification and management of MAC and potential risk factors are crucial for improving post-LT survival.

Strong, highly porous and sustainable nanocellulose foam made using bioderived hyperbranched crosslinker for thermal insulation and sound absorption.

This paper reports an environment-friendly biobased foam made with cellulose nanofiber (CNF) and a biobased hyperbranched crosslinker, glycerol succinic anhydride (GSA). As a biobased hyperbranched crosslinker, carboxyl-terminated GSA is synthesized through a straightforward esterification process involving glycerol and succinic anhydride. The GSA-crosslinked CNF (GSA/CNF) foam is prepared using a facile, sustainable, cost-effective, and efficient solvent-exchange method. The resulting foam exhibits notable characteristics, including improved dimensional stability, remarkably low density (13.41 mg/cm3) with high porosity (>99 %), and exceptional compressive strength (494 kPa) and modulus (452 kPa). Further, the foam offers outstanding sound absorption capabilities with a coefficient of 0.986 at 2 kHz and remarkably low thermal conductivity (30.18 mW/mK), significantly lower than commonly used and reported porous materials, indicating its potential as an efficient, environmentally friendly sound absorption and thermal insulation material.

Environment-friendly, high-performance cellulose nanofiber-vanillin epoxy nanocomposite with excellent mechanical, thermal insulation and UV shielding properties.

With the increased demand for biobased epoxy thermosets as an alternative to petroleum-based materials in various fields, developing environment-friendly and high-performance natural fiber-biobased epoxy nanocomposites is crucial for industrial applications. Herein, an environment-friendly nanocomposite is reported by introducing cellulose nanofiber (CNF) in situ interaction with lignin-derived vanillin epoxy (VE) monomer and 4, 4´-diaminodiphenyl methane (DDM) hardener that serves as a multifunctional platform. The CNF-VE nanocomposite is fabricated by simply dispersing the CNF suspension to the VE and DDM hardener solution through the in-situ reaction, and its mechanical properties and thermal insulation behavior, wettability, chemical resistance, and optical properties are evaluated with the CNF weight percent variation. The well-dispersed CNF-VE nanocomposite exhibited high tensile strength (∼127.78 ± 3.99 MPa) and strain-at-break (∼16.49 ± 0.61 %), haziness (∼50 %) and UV-shielding properties. The in situ loading of CNF forms covalent crosslinking with the VE and favors improving the mechanical properties along with the homogeneous dispersion of CNF. The CNF-VE nanocomposite also shows lower thermal conductivity (0.26 Wm-1K-1) than glass. The environment-friendly and high-performance nanocomposite provides multiple platforms and can be used for building materials.

Fully Printed Cellulose Nanofiber-Ag Nanoparticle Composite for High-Performance Humidity Sensor.

This paper reports a high-performance humidity sensor made using a novel cellulose nanofiber (CNF)-silver nanoparticle (AgNP) sensing material. The interdigital electrode pattern was printed via reverse-offset printing using Ag nano-ink, and the sensing layer on the printed interdigitated electrode (IDE) was formed by depositing the CNF-AgNP composite via inkjet printing. The structure and morphology of the CNF-AgNP layer are characterized using ultraviolet-visible spectroscopy, an X-ray diffractometer, field emission scanning electron microscopy, energy-dispersive X-ray analysis, and transmission electron microscopy. The humidity-sensing performance of the prepared sensors is evaluated by measuring the impedance changes under the relative humidity variation between 10 and 90% relative humidity. The CNF-AgNP sensor exhibited very sensitive and fast humidity-sensing responses compared to the CNF sensor. The electrode distance effect and the response and recovery times are investigated. The enhanced humidity-sensing performance is reflected in the increased conductivity of the Ag nanoparticles and the adsorption of free water molecules associated with the porous characteristics of the CNF layer. The CNF-AgNP composite enables the development of highly sensitive, fast-responding, reproducible, flexible, and inexpensive humidity sensors.

Successful expansion and cryopreservation of human natural killer cell line NK-92 for clinical manufacturing.

Natural killer (NK) cells have recently shown renewed promise as therapeutic cells for use in treating hematologic cancer indications. Despite this promise, NK cell manufacturing workflows remain largely manual, open, and disconnected, and depend on feeders, as well as outdated unit operations or processes, often utilizing research-grade reagents. Successful scale-up of NK cells critically depends on the availability and performance of nutrient-rich expansion media and cryopreservation conditions that are conducive to high cell viability and recovery post-thaw. In this paper we used Cytiva hardware and media to expand the NK92 cell line in a model process that is suitable for GMP and clinical manufacturing of NK cells. We tested a range of cryopreservation factors including cooling rate, a range of DMSO-containing and DMSO-free cryoprotectants, ice nucleation, and cell density. Higher post-thaw recovery was seen in cryobags over cryovials cooled in identical conditions, and cooling rates of 1°C/min or 2°C/min optimal for cryopreservation in DMSO-containing and DMSO-free cryoprotectants respectively. Higher cell densities of 5x107 cells/ml gave higher post-thaw viability than those cryopreserved at either 1x106 or 5x106 cells/ml. This enabled us to automate, close and connect unit operations within the workflow while demonstrating superior expansion and cryopreservation of NK92 cells. Cellular outputs and performance were conducive to clinical dosing regimens, serving as a proof-of-concept for future clinical and commercial manufacturing.

Advanced hydrostable, recyclable and degradable cellulose hybrid films as renewable alternatives to synthetic plastics.

Strong, tough and sustainable materials are in high demand in various engineering applications. We demonstrate a potential sustainable hybrid film made from natural cellulose and a biobased slurry. Through a simple and scalable approach, cellulose can be processed into an advanced material with over 2.8 and 9.2-fold increase in dry strength and toughness after curing and a 728-fold increase in wet strength, respectively. In addition, these hybrid composite films display an outstanding antioxidant activity surpassing 90 %, along with excellent ultraviolet radiation shielding and thermal insulation properties. Further, the hybrid films can be fabricated by integrating all-natural materials and still guarantee their unique functionality. We also demonstrate the feasibility of a circular bioeconomy by recycling the hybrid film using a green, deep eutectic solvent to fabricate a recycled hybrid film that displays excellent mechanical and optical properties. When recycling is unsuitable or economical, the hybrid film can naturally degrade in the soil under 6 months. These encouraging findings suggest the promise of cellulose hybrid films as a renewable, low-cost, tough, and strong material with the potential to replace nonrenewable synthetic plastics and products.

Sonographic and computed tomographic features of intestinal mast cell tumors mimicking alimentary lymphoma in 2 dogs.

Two shih tzu dogs were referred to our clinic because of hematochezia and vomiting. Abdominal ultrasonography revealed a focal, asymmetric, exophytic small intestinal mass with loss of wall layering and muscular layer thickening of the adjacent intestine. Computed tomography (CT) in both dogs revealed a focal, asymmetric, homogenously contrast-enhanced exophytic jejunal and duodenal mass with an intact mucosal layer and generalized lymphadenopathy. Metastasis and ulceration were not detected on CT. The initial imaging diagnosis was lymphoma in both dogs; however, histopathological examination revealed the presence of intestinal mast cell tumors (iMCTs). Despite its similarity to alimentary lymphoma, iMCT should be considered a possible diagnosis, based on imaging characteristics, to ensure that proper treatments are selected. This is the first veterinary report describing detailed ultrasonographic and CT characteristics of iMCTs. Key clinical message: This is the first veterinary case report demonstrating sonographic and computed tomographic features of canine iMCT, which can be misdiagnosed as alimentary lymphoma. This report provides another differential diagnosis to consider when determining the appropriate patient treatment direction and histopathological examination.

Caractéristiques échographiques et tomodensitométriques de mastocytomes intestinaux imitant un lymphome alimentaire chez 2 chiens. Deux chiens shih tzu ont été référés à notre clinique en raison d'une hématochézie et de vomissements. L'échographie abdominale a révélé une masse focale, asymétrique et exophytique de l'intestin grêle avec perte de stratification pariétale et épaississement de la couche musculaire de l'intestin adjacent. La tomodensitométrie (TDM) chez les deux chiens a révélé une masse jéjunale et duodénale exophytique focale, asymétrique, homogène et contrastée avec une couche muqueuse intacte et une lymphadénopathie généralisée. Les métastases et les ulcérations n'ont pas été détectées par TDM. Le diagnostic initial d'imagerie était un lymphome chez les deux chiens; cependant, l'examen histopathologique a révélé la présence de mastocytomes intestinaux (iMCT). Malgré sa similitude avec le lymphome alimentaire, l'iMCT doit être considérée comme un diagnostic possible, basé sur les caractéristiques de l'imagerie, afin de garantir la sélection des traitements appropriés. Il s'agit du premier rapport vétérinaire décrivant les caractéristiques échographiques et tomodensitométriques détaillées des iMCT.Message clinique clé :Il s'agit du premier rapport de cas vétérinaire démontrant les caractéristiques échographiques et tomodensitométriques de l'iMCT canin, qui peuvent être diagnostiquées à tort comme un lymphome alimentaire. Ce rapport fournit un autre diagnostic différentiel à prendre en compte lors de la détermination de l'orientation thérapeutique et de l'examen histopathologique appropriés du patient.(Traduit par Dr Serge Messier).