Sequentially Coated Wavy Nanowire Composite Transparent Electrode for Stretchable Solar Cells.

Recent advances in fabricating stretchable and transparent electrodes have led to various techniques for establishing next-generation form-factor optoelectronic devices. Wavy Ag nanowire networks with large curvature radii are promising platforms as stretchable and transparent electrodes due to their high electrical conductivity and stretchability even at very high transparency. However, there are disadvantages such as intrinsic nonregular conductivity, large surface roughness, and nanowire oxidation in air. Here, we introduce electrically synergistic but mechanically independent composite electrodes by sequentially introducing conducting polymers and ionic liquids into the wavy Ag nanowire network to maintain the superior performance of the stretchable transparent electrode while ensuring overall conductivity, lower roughness, and long-term stability. In particular, plenty of ionic liquids can be incorporated into the uniformly coated conducting polymer so that the elastic modulus can be significantly lowered and sliding can occur at the nanowire interface, thereby obtaining the high mechanical stretchability of the composite electrode. Finally, as a result of applying the composite film as the stretchable transparent electrode of stretchable organic solar cells, the organic solar cell exhibits a high power conversion efficiency of 11.3% and 89% compared to the initial efficiency even at 20% tensile strain, demonstrating excellent stretching stability.

Shear-Rolling Process for Unidirectionally and Perpendicularly Oriented Sub-10-nm Block Copolymer Patterns on the 4 in Scale.

Shear alignment of the block copolymer (BCP) thin film is one of the promising directed self-assembly (DSA) methodologies for the unidirectional alignment of sub-10 nm microdomains of BCPs for next-generation nanolithography and nanowire-grid polarizers. However, because of the differences in the surface/interfacial energies at the top surface/bottom interface, the shear-induced ordering of BCP nanopatterns has been restricted to BCPs with spherical and cylindrical nanopatterns and cannot be realized for high-aspect-ratio perpendicular lamellar structures, which is essential for practical application to semiconductor pattern processes. It is still a difficult challenge to fabricate the unidirectional alignment in a short time over a large area. In this study, we propose an approach for combining the shear-rolling process with the filtered plasma treatment of BCP films for the fabrication of unidirectionally aligned and perpendicularly oriented lamellar nanostructures. This approach enables fabrication within 1 min on a 4 in scale. We treated filtered plasma on the BCP film for perpendicular orientation and executed the hot-rolling process with different roller and stage speeds. Large-scale shear was generated only at the location where the BCP film was in contact with both the roller and stage, effectively applying shear stress to a large area of the BCP film within a short time. The repeated application of this shear-rolling process can achieve a higher level of unidirectional alignment. Our aligned BCP vertical lamellae were used to fabricate a high-aspect-ratio sub-10-nm-wide metallic nanowire array via dry/wet processes. In addition, shear-rolling with chemoepitaxy patterns can achieve higher orientational order and lower defectivity.

Colloidal Spherical Quantum Wells with Near-Unity Photoluminescence Quantum Yield and Suppressed Blinking.

Thick inorganic shells endow colloidal nanocrystals (NCs) with enhanced photochemical stability and suppression of photoluminescence intermittency (also known as blinking). However, the progress of using thick-shell heterostructure NCs in applications has been limited due to the low photoluminescence quantum yield (PL QY ≤ 60%) at room temperature. Here, we demonstrate thick-shell NCs with CdS/CdSe/CdS seed/spherical quantum well/shell (SQW) geometry that exhibit near-unity PL QY at room temperature and suppression of blinking. In SQW NCs, the lattice mismatch is diminished between the emissive CdSe layer and the surrounding CdS layers as a result of coherent strain, which suppresses the formation of misfit defects and consequently permits ∼100% PL QY for SQW NCs with a thick CdS shell (≥5 nm). High PL QY of thick-shell SQW NCs is preserved even in concentrated dispersion and in film under thermal stress, which makes them promising candidates for applications in solid-state lightings and luminescent solar concentrators.

Functional nanocomposites with perfect nanoblending between water-soluble polymers and hydrophobic inorganic nanoparticles: applications to electric-stimuli-responsive films.

There is rising demand for metal or metal oxide nanoparticle (NP)/polymer nanocomposite films with desired functionalities. However, it is difficult to directly combine well-defined NPs synthesized using organic fatty acids in nonpolar media with water-soluble polymers, except polyelectrolytes with specific functional moieties, because they differ in their hydrophobic/hydrophilic properties. We have developed a facile and universal hydrophilic/hydrophobic layer-by-layer (LbL) assembly method that enables perfect nanoblending between water-soluble polymers and hydrophobic NPs, maintaining their specific functionalities. Various hydrophobic NPs stabilized by using oleic acid (OA) (e.g., OA-TiO2, OA-Fe3O4, OA-Ag, and OA-Pt NPs) were directly LbL assembled with various water-soluble polymers (including biomaterials) containing carboxylic acid (-COOH), tertiary ammonium (N+), hydroxyl (-OH), and/or ether (-O-) groups. This adsorption behavior is based on the affinities between water-soluble polymers with multidentate binding sites and the surfaces of metal or metal oxide NPs stabilized by OA ligands. Our approach can be used to fabricate unipolar switching nonvolatile memory devices with ON/OFF current ratios greater than ∼1010 and good memory stability, despite the use of water-soluble polymers.

Multicatalytic colloids with highly scalable, adjustable, and stable functionalities in organic and aqueous media.

Despite a large number of developments of noble metal (or metal oxide) NP-based catalysts, it has been a great challenge to prepare high-performance recyclable catalysts with integrated functionalities that can be used in various solvent media. Here, we report on layer-by-layer (LbL) assembled multicatalysts with high catalytic performance, showing high dispersion and recycling stability in organic and aqueous media. The remarkable advantages of our approach are as follows. (i) Various metal or metal oxide NPs with desired catalytic performance can be easily incorporated into multilayered shells, forming densely packed arrays that allow one colloid to be used as a multicatalyst with highly integrated and controllable catalytic properties. (ii) Additionally, the dispersion stability of catalytic colloids in a desired solvent can be determined by the type of ultrathin outermost layer coating each colloid. (iii) Lastly, the covalent bonding between inorganic NPs and dendrimers within multilayer shells enhances the recycling stability of multicatalytic colloids. The resulting core-shell colloids including OA-Fe3O4 NPs, TOABr-Pd NPs, and OA-TiO2 NPs exhibited excellent performance in the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) and photocatalysis in aqueous media and in the Sonogashira coupling reaction (99% yield) in organic media. Given that the catalytic properties of recyclable colloids reported to date have entirely depended on the functionality of a single catalytic NP layer deposited onto colloids in selective solvent media, our approach provides a basis for the design and exploitation of high-performance recyclable colloids with integrated multicatalytic properties and high dispersion stability in a variety of solvents.

Influence of shell thickness on the performance of light-emitting devices based on CdSe/Zn1-X CdX S core/shell heterostructured quantum dots.

CdSe/Zn1-X CdX S core/shell heterostructured quantum dots (QDs) with varying shell thicknesses are studied as the active material in a series of electroluminescent devices. "Giant" CdSe/Zn1-X CdX S QDs (e.g., CdSe core radius of 2 nm and Zn1-X CdX S shell thickness of 6.3 nm) demonstrate a high device efficiency (peak EQE = 7.4%) and a record-high brightness (>100 000 cd m(-2) ) of deep-red emission, along with improved device stability.

Highly aligned ultrahigh density arrays of conducting polymer nanorods using block copolymer templates.

Ultrahigh density arrays of conducting polypyrrole (PPy) nanorods are fabricated directly on the indium-tin oxide coated glass by an electropolymerization within a porous diblock copolymer template. The nanorods are shown to have conductivity much higher than thin PPy films, due to the high degree of chain orientation, even though the separation distance for two neighboring PPy main chains is as small as 0.37 nm. The ultrahigh density arrays of conducting polymer nanorods have potential applications as sensor materials, nanoactuators, and organic photovoltaic devices.

Synthesis of double-walled carbon nanotubes by catalytic chemical vapor deposition and their field emission properties.

Double-walled carbon nanotubes (DWCNTs) were synthesized by catalytic chemical vapor deposition using Fe-Mo/MgO as a catalyst at 1000 degrees C under the mixture of methane and hydrogen gas. The nanotubes were purified by acid but were not damaged. Thermogravimetric analysis revealed the purity of the tubes to be about 90%. The high-resolution transmission electron microscopy image showed that DWCNTs have inner tube diameters of 1.4-2.6 nm and outer tube diameters of 2.3-3.4 nm. We observed radial breathing modes in Raman spectra, which are related to the diameter of inner nanotubes. The purified DWCNTs were mixed with organic vehicles and glass frit, and then they were screen-printed on glass substrate coated with indium tin oxide. The field emission properties of the screen-printed DWCNT films were examined by varying the amount of glass frit ingredient within the DWCNT paste. The results showed that DWCNT emitters had good emission properties such as turn-on field of 1.33-1.78 V/microm and high brightness. When the applied anode voltage was gradually increased, current density and brightness became saturated. We also observed DWCNTs adsorbed on the anode plate; they were DWCNTs peeled off from the cathode plate for field emission measurement.