RESUMO
A cutting-edge precision technique for computation of focal length of a positive lens with double-hole mask is described. The technique is simple and versatile due to incorporation of the updated functions of image sensor device that supports reading the distance between beam spots instantaneously while the position of the specimen is being changed, as well as the reduction in several challenging measurement steps. Furthermore, this technique does not require prior knowledge of distances in the optical setup. High accuracy in focal-length measurement is obtained by precise beam spot distance analysis using image sensor integrated software. The acquired data exhibit considerably high precision and reproducibility.
RESUMO
In modern high-intensity ultrafast laser processing, detecting the focal position of the working laser beam, at which the intensity is the highest and the beam diameter is the lowest, and immediately locating the target sample at that point are challenging tasks. A system that allows in-situ real-time focus determination and fabrication using a high-power laser has been in high demand among both engineers and scientists. Conventional techniques require the complicated mathematical theory of wave optics, employing interference as well as diffraction phenomena to detect the focal position; however, these methods are ineffective and expensive for industrial application. Moreover, these techniques could not perform detection and fabrication simultaneously. In this paper, we propose an optical design capable of detecting the focal point and fabricating complex patterns on a planar sample surface simultaneously. In-situ real-time focus detection is performed using a bandpass filter, which only allows for the detection of laser transmission. The technique enables rapid, non-destructive, and precise detection of the focal point. Furthermore, it is sufficiently simple for application in both science and industry for mass production, and it is expected to contribute to the next generation of laser equipment, which can be used to fabricate micro-patterns with high complexity.
RESUMO
We describe a new approach for locating the focal position in laser micromachining. This approach is based on a feedback system that uses a charge-coupled device (CCD) camera, a beam splitter, and a mirror to focus a laser beam on the surface of a work piece. We tested the proposed method for locating the focal position by using Zemax simulations, as well as physically carrying out drilling processes. Compared with conventional methods, this approach is advantageous because: the implementation is simple, the specimen can easily be positioned at the focal position, and the dynamically adjustable scan amplitude and the CCD camera can be used to monitor the laser beam's profile. The proposed technique will be particularly useful for locating the focal position on any surface in laser micromachining.
