Existence of Gender-Based Difference in Morphology of Convex Lateral Tibial Plateau in Korean Population Primary Knee Joint Osteoarthritis.

PURPOSE: Morphological differences in the knee joints of females and males have been reported in a previous study. These differences have realized the need of developing a gender-specific prosthesis. However, anatomical studies on gender-based differences in the proximal tibial plateau's sagittal curvature have rarely been conducted. Therefore, this study is aimed at evaluating the geometry of the sagittal curvature of the proximal tibial plateau in the Korean population. METHODS: Three-dimensional data for the sagittal curvature of the tibial plateau morphology from 1976 patients (i.e., 299 male and 1677 female) were assessed using magnetic resonance imaging. The sagittal profiles of the tibial plateaus were also evaluated. The independent t-test and paired t-test were used for statistical analysis. RESULTS: The proximal tibia had concave and convex surfaces in the medial and lateral plateaus, respectively, for both genders. In addition, the medial diameter of the tibial plateau was significantly greater than the lateral diameter for both genders. Gender-based difference was not found in the medial diameter of the tibial plateau but was observed in the lateral diameter. CONCLUSION: These results may provide guidelines for a suitable knee implant design for the Korean patients. The incorporation of this shape information in the medial and lateral sides in the prosthetics for a total knee arthroplasty and a lateral unicompartmental knee arthroplasty can improve knee range motion.

The influence of the number of holes in the open wedge high tibial osteotomy on knee biomechanics using finite element analysis.

BACKGROUND: The most significant differences of high tibial osteotomy (HTO) were found in terms of plate length, and this was related to number of holes distal region of the plate below wedge. The purpose of this study is to evaluate the biomechanical effects of three different designs medial opening wedge plates. HYPOTHESIS: The design of the HTO plate influenced the outcome of the biomechanics. METHODS: The HTO model was simulated using finite element (FE) model. This FE investigation included three types of loading conditions corresponding to the loads used in the experimental study for model validation and model predictions for clinically relevant loading scenarios. The average stress and contact stress were evaluated. RESULTS: The highest average stress was observed in the TomoFix. Conversely, the stress on the bone declined in the order of Puddu, Maxi and TomoFix plates. The micromotion in the wedge displayed a similar trend to the stress on bone. The highest and lowest contact stresses on the medial meniscus were observed in the Puddu and TomoFix plate, respectively. However, an opposite trend was observed in the lateral meniscus. The contact stress on medial and lateral menisci decreased and increased, respectively, in all three different plates when compared to those in the intact model. DISCUSSION: The TomoFix plate exhibited the highest stability relative to the micromotions of the wedge. However, in terms of the stress on the bone and plates, a stress-shielding effect could exist in the TomoFix plate. Additionally, the contact stress on the articular surface suggested that a complicated relationship could exist with respect to the plate design. LEVEL OF EVIDENCE: IV.

Finite element analysis of the influence of the posterior tibial slope on mobile-bearing unicompartmental knee arthroplasty.

BACKGROUND: The most common modes of failure reported in unicompartmental knee arthroplasty (UKA) in its first two decades were wear on the polyethylene (PE) insert, component loosening, and progressive osteoarthritis in the other compartment. The rates of implant failure due to poor component positioning in patients who have undergone UKA have been reported. However, the effect of the posterior tibial slope on the biomechanical behavior of mobile-bearing Oxford medial UKA remains unknown. METHODS: We applied finite element (FE) analysis to evaluate the effects of the posterior tibial slope in mobile-bearing UKA on the contact stresses in the superior and inferior surfaces of PE inserts and articular cartilage as well as the forces exerted on the anterior cruciate ligament (ACL). Seven FE models for posterior tibial slopes of -1°, 1°, 3°, 5°, 7°, 9°, and 11° were developed and analyzed under normal-level walking conditions based on this approach. RESULTS: The maximum contact stresses on both the superior and inferior surfaces of the PE insert decreased as the posterior tibial slope increased. However, the maximum contact stress on the lateral articular cartilage and the force exerted on the ACL increased as the posterior tibial slope increased. CONCLUSIONS: Increasing the tibial slope led to a reduction in the contact stress on the PE insert. However, a high contact stress on the other compartment and increased ACL force can cause progressive osteoarthritis in the other compartment and failure of the ACL.

Biomechanical effect of tibial slope on the stability of medial unicompartmental knee arthroplasty in posterior cruciate ligament-deficient knees.

AIMS: Unicompartmental knee arthroplasty (UKA) has become a popular method of treating knee localized osteoarthritis (OA). Additionally, the posterior cruciate ligament (PCL) is essential to maintaining the physiological kinematics and functions of the knee joint. Considering these factors, the purpose of this study was to investigate the biomechanical effects on PCL-deficient knees in medial UKA. METHODS: Computational simulations of five subject-specific models were performed for intact and PCL-deficient UKA with tibial slopes. Anteroposterior (AP) kinematics and contact stresses of the patellofemoral (PF) joint and the articular cartilage were evaluated under the deep-knee-bend condition. RESULTS: As compared to intact UKA, there was no significant difference in AP translation in PCL-deficient UKA with a low flexion angle, but AP translation significantly increased in the PCL-deficient UKA with high flexion angles. Additionally, the increased AP translation became decreased as the posterior tibial slope increased. The contact stress in the PF joint and the articular cartilage significantly increased in the PCL-deficient UKA, as compared to the intact UKA. Additionally, the increased posterior tibial slope resulted in a significant decrease in the contact stress on PF joint but significantly increased the contact stresses on the articular cartilage. CONCLUSION: Our results showed that the posterior stability for low flexion activities in PCL-deficient UKA remained unaffected; however, the posterior stability for high flexion activities was affected. This indicates that a functional PCL is required to ensure normal stability in UKA. Additionally, posterior stability and PF joint may reduce the overall risk of progressive OA by increasing the posterior tibial slope. However, the excessive posterior tibial slope must be avoided.Cite this article: Bone Joint Res 2020;9(9):593-600.

Effects of the material properties of a focal knee articular prosthetic on the human knee joint using computational simulation.

BACKGROUND: Localized cartilage defects are related to joint pain and reduced function to the development of osteoarthritis. The mechanical properties of the implant for treatment do influence its longevity. Therefore, we aimed to evaluate the effect of material properties' variations of anatomically shaped focal knee implants in the knee joint using numerical finite element analysis. METHODS: Computational simulations were performed for different cases including an intact knee, a knee with a focal cartilage defect, and a knee fitted with a focal articular prosthetic having three distinct mechanical properties: cobalt-chromium, pyrolytic carbon, and polyethylene. Femoral cartilage, tibial cartilage, and menisci contact pressures were evaluated under the load. In addition, bone stress was evaluated to investigate the stress shielding effect. RESULTS: Compared with the intact model, the contact stress of the focal implant model was increased; on the femoral lateral cartilage by 14%, on medial and lateral tibial cartilages by nine percent and 10%, on medial and lateral menisci by 23% and 20%. In contrast, the focal implant model had no effect on the menisci but contact stress on the tibial cartilage increased compared with the intact model. The BioPoly model showed the lowest contact stress on femoral and tibial cartilages. Additionally, the cobalt-chromium model showed the lowest bone stress that improved the load-sharing effect. CONCLUSIONS: The results suggested that implant material properties are an important parameter in the design of a focal implant. The polyethylene model potentially restored the intact knee contact mechanics and it reduced the risk of physiological damage to the articular cartilage.

Effect of the presence of the articular cartilage on the femoral component rotation in total knee arthroplasty in female and varus osteoarthritis knees.

PURPOSE: Surgical techniques for total knee arthroplasty (TKA) require femoral rotational corrections that alter the position of the surface of the posterior femoral joint especially in kinematic alignment. However, preoperative planning of TKA based on computed tomography (CT), without knowing the femoral cartilage thickness, may cause post-surgery failures in femoral rotation. Therefore, this study aimed to evaluate the effects of posterior condyle cartilage thickness on rotational alignment in the femoral component. METHODS: Three-dimensional magnetic resonance imaging (MRI) scans were obtained for 139 male and 531 female osteoarthritis patients. The angles defined by the femoral posterior condylar axis (PCA) and the surgical transepicondylar axis (TEA) were evaluated with respect to the presence of cartilage. Additionally, these effects were evaluated with respect to patient gender and varus/valgus condition. RESULTS: In all patients, the angle between the TEA and PCA was significantly greater in the presence of cartilage than in the absence of cartilage. This result was also seen in female patients. However, there was no difference in the TEA/PCA angle in male patients based on the presence of cartilage. The TEA/PCA angle was significantly greater in the presence of cartilage than in the absence of cartilage in the female varus group. However, there were no differences in the TEA/PCA angle based on the presence of cartilage in the male varus/valgus and female valgus groups. Cartilage thickness in the posterior femoral condyle was significantly greater on the lateral side than on the medial side in all and male patients. However, there was no difference between the genders regarding cartilage thickness. CONCLUSION: Surgical planning for TKA based on CT does not consider articular cartilage and could lead to external malrotation of the femoral implant. Therefore, the effect of the remaining posterior condylar cartilage should be considered by surgeons to prevent over-rotation of the femoral component, especially in female varus knees.

Evaluation of tibial rotational axis in total knee arthroplasty using magnetic resonance imaging.

Surgeon-dependent factors such as optimal implant alignment of the tibial component are thought to play a significant role in the outcome following primary total knee arthroplasty (TKA). In addition, tibial component malrotation is associated with pain, stiffness, and altered patellofemoral kinematics in TKA. However, measuring tibial component rotation after TKA is difficult. Therefore, the purpose of this study was to find a reliable method for positioning the tibial component in TKA. To investigate the morphology of the tibial plateau, 977 patients' knees (829 females and 148 males) were evaluated using MRI. The relationships between the femoral transepicondylar axis (TEA), Akagi line, posterior tibial margin (PTM), medial third of the tibial tubercle (MTT), and anatomical tibial axis (ATS) were investigated in this study. In addition, gender difference in tibial rotational alignment were evaluated. Relative to the TEA, the MTT and ATS were externally rotated by 0.5° ± 4.4° and 0.5° ± 5.4°, respectively, while Akagi line and PTM were internally rotated by 3.7° ± 4.5° and 9.9° ± 6.1°, respectively. Gender differences were found in MTT, Akagi line and ATS (P < 0.05). Our result showed that the rotational alignment led to notable variance between femoral and tibial components using fixed bone landmarks. The MTT and ATS axes showed the closest perpendicular aspect with projected TEA. And the MTT and Akagi axes showed the reduced variance. In addition, PTM is not a reliable landmark for rotation of the tibial component. Based on the results of this study, surgeons may choose the proper anteroposterior axis of the tibial component in order to reduce rotational mismatch and improve clinical outcomes.

The femoral trochlear anterior line is a better alternative intra-operative reference compared to femoral anterior tangent line for femoral rotation in both genders in total knee arthroplasty.

PURPOSE: To determine the most reliable reference axis for the femoral component rotation in TKA patients by comparing the trochlear anterior line (TAL) and the femoral anterior tangent line (FAT). To evaluate the variability of each anatomic parameter in a Korean population. METHODS: Magnetic resonance images (MRIs) were taken for 500 patients (400 females and 100 males) with knee joint osteoarthritis who had Kellgren and Lawrence grade 3 and 4 prior to TKA in our institution between February 2016 and September 2017. It was investigated that whether significant differences in variance and gender exist for TAL and FAT. RESULTS: TAL and the FAT were internally rotated by 5.1° ± 3.1° and 6.8° ± 6.1°, respectively, about the Transepicondylar axis (TEA). Although no gender-related differences were found for the TAL, they were found for the FAT. The variance of the TAL with respect to the TEA was significantly smaller compared with that for the FAT and thus exhibited a more consistent distribution. In addition, such a trend was found for both genders. CONCLUSIONS: The results show that the TAL is a favorable index for appropriate rotational alignment of the femoral component in TKA.

Gender difference in bowing of the sagittal femoral morphology measurement using magnetic resonance imaging.

The importance of femoral sagittal bowing on total knee arthroplasty (TKA) has not been actively discussed. Femoral sagittal bowing can lead to cortex damage, fractures, or femoral malalignment. Therefore, the purpose of this study was to evaluate femoral sagittal bowing at different segments of the femur in the Korean population, and to discuss the implications on total knee arthroplasty. Differences in the morphology of femoral sagittal bowing for 978 patients-829 women and 148 men-were evaluated using magnetic resonance imaging. The angle between the femoral mechanical axis and the anterior cortex line was measured for all the patients. In addition, the gender difference in femoral sagittal bowing was investigated. The angle of femoral sagittal bowing with the mechanical axis was 2.8˚ ± 2.2˚. The angles for femoral sagittal bowing were 2.9˚ ± 2.2˚ and 2.3˚ ± 2.6˚ for females and males, respectively. Thus, a gender difference was found in the femoral sagittal bowing (p < 0.05). Excessive sagittal bowing of the femur can affect the final sagittal position of the femoral component, and this has implications for implant design selection. We recommend that surgeons accurately perform pre-operative evaluation of femoral bowing to prevent potential malalignment, rotation, and abnormal stresses between the femur and implant.

Clinical and Radiological Results after Arthroscopic Superior Capsular Reconstruction in Patients with Massive Irreparable Rotator Cuff Tears.

BACKGROUND: Massive, irreparable rotator cuff tears (RCTs) are a challenging clinical problem in young patients. In recent years, arthroscopic superior capsular reconstruction (ASCR) is a popular treatment in the massive, irreparable RCTs. However, studies reporting clinical results of ASCR are rare in the literature. METHODS: Between 2013 and 2015, six patients underwent ASCR. One patient treated with dermal allograft, while five patients with autogenous fascia lata graft. Demographic data, as well as preoperative and last follow-up clinical data including pain, range of motion (ROM), strength, American Shoulder and Elbow Surgeons system, the Constant system, the University of California at Los Angeles system, the Simple Shoulder Test, and the Shoulder Pain and Disability Index system were obtained. Acromiohumeral distances and Hamada classification were measured on standard anteroposterior x-ray. RESULTS: All patients were men, and the average age was 59.5 ± 4.18 years (range, 53-65 years).The minimum follow-up was 18 months with a mean follow-up was 27.33 ± 7.58 months (range, 18-36). All patients had postoperative improvement in pain scores and functional scores. The ROM and strength did not improve after surgery. The Hamada score progressed of radiographic stage in 2 patients. In the case of dermal allograft, there was graft failure 6 weeks after ASCR. CONCLUSIONS: Our results support the ASCR as a viable treatment for surgical salvage in massive, irreparable RCTs. This treatment option may provide patients with decreased pain and increased function. And studying our case of dermal allograft failure provides opportunities to decrease graft failure in ASCR using dermal allograft.