Investigation of odor pollution by utilizing selected ion flow tube mass spectrometry (SIFT-MS) and principal component analysis (PCA).

Odor pollution, also referred to as odor nuisance, is a growing environmental concern that is significantly associated with mental health. Once emitted into the air, the concentration of odorous substances varies considerably with wind conditions, leading to difficulties in timely sampling. In the present study, we employed selected ion flow tube mass spectrometry (SIFT-MS) to measure 22 odor-producing molecules continuously in an urban-rural complex city. In addition, we applied statistical analyses, principal component analysis (PCA), and a conditional probability function (CPF) to the datasets obtained from SIFT-MS to identify the odor characteristics at two study sites. At site A, odorants related to livestock farming and industry showed high factor loadings on principal components (PCs) from the PCA. In contrast, we estimated that the odorous gaseous chemicals affecting site B were closely related to sewage treatment and municipal solid waste disposal. Similar CPF patterns of grouped substances from the PCA supported the association between potential odor sources and specific odorants at site B, which helped estimate possible source locations. Consequently, our findings indicate that continuous monitoring of odorous substances using SIFT-MS can be an effective way to provide sufficient information on odor-producing molecules, leading to the clear identification of odor characteristics despite the high variability of odorous substances.

Study of multistep Dense U-Net-based automatic segmentation for head MRI scans.

BACKGROUND: Despite extensive efforts to obtain accurate segmentation of magnetic resonance imaging (MRI) scans of a head, it remains challenging primarily due to variations in intensity distribution, which depend on the equipment and parameters used. PURPOSE: The goal of this study is to evaluate the effectiveness of an automatic segmentation method for head MRI scans using a multistep Dense U-Net (MDU-Net) architecture. METHODS: The MDU-Net-based method comprises two steps. The first step is to segment the scalp, skull, and whole brain from head MRI scans using a convolutional neural network (CNN). In the first step, a hybrid network is used to combine 2.5D Dense U-Net and 3D Dense U-Net structure. This hybrid network acquires logits in three orthogonal planes (axial, coronal, and sagittal) using 2.5D Dense U-Nets and fuses them by averaging. The resultant fused probability map with head MRI scans then serves as the input to a 3D Dense U-Net. In this process, different ratios of active contour loss and focal loss are applied. The second step is to segment the cerebrospinal fluid (CSF), white matter, and gray matter from extracted brain MRI scans using CNNs. In the second step, the histogram of the extracted brain MRI scans is standardized and then a 2.5D Dense U-Net is used to further segment the brain's specific tissues using the focal loss. A dataset of 100 head MRI scans from an OASIS-3 dataset was used for training, internal validation, and testing, with ratios of 80%, 10%, and 10%, respectively. Using the proposed approach, we segmented the head MRI scans into five areas (scalp, skull, CSF, white matter, and gray matter) and evaluated the segmentation results using the Dice similarity coefficient (DSC) score, Hausdorff distance (HD), and the average symmetric surface distance (ASSD) as evaluation metrics. We compared these results with those obtained using the Res-U-Net, Dense U-Net, U-Net++, Swin-Unet, and H-Dense U-Net models. RESULTS: The MDU-Net model showed DSC values of 0.933, 0.830, 0.833, 0.953, and 0.917 in the scalp, skull, CSF, white matter, and gray matter, respectively. The corresponding HD values were 2.37, 2.89, 2.13, 1.52, and 1.53 mm, respectively. The ASSD values were 0.50, 1.63, 1.28, 0.26, and 0.27 mm, respectively. Comparing these results with other models revealed that the MDU-Net model demonstrated the best performance in terms of the DSC values for the scalp, CSF, white matter, and gray matter. When compared with the H-Dense U-Net model, which showed the highest performance among the other models, the MDU-Net model showed substantial improvements in the HD view, particularly in the gray matter region, with a difference of approximately 9%. In addition, in terms of the ASSD, the MDU-Net model outperformed the H-Dense U-Net model, showing an approximately 7% improvements in the white matter and approximately 9% improvements in the gray matter. CONCLUSION: Compared with existing models in terms of DSC, HD, and ASSD, the proposed MDU-Net model demonstrated the best performance on average and showed its potential to enhance the accuracy of automatic segmentation for head MRI scans.

Health effects of PM2.5 constituents and source contributions in major metropolitan cities, South Korea.

Ambient PM2.5 is one of the major risk factors for human health, and is not fully explained solely by mass concentration. We examined the short-term associations of cause-specific mortality (i.e., all-cause, cardiovascular, and respiratory mortality) with the 15 chemical constituents and sources of PM2.5 in four metropolitan cities of South Korea during 2014-2018. We found transition metals consistently showed significant associations with all-cause mortality, while the effects of other constituents varied across the cities and for cause of death. Carbonaceous components strongly affected the all-cause, cardiovascular, and respiratory mortality in Daejeon. Secondary inorganic aerosols, SO42- and NH4+, showed significant associations with respiratory mortality in Gwangju. We also found the sources from which species closely linked to mortality generally increased the relative mortality risks. Heavy metal markers from soil or industrial sources were significantly associated with mortality in all cities. However, several sources influenced mortality despite their marker species not being significantly associated with it. Secondary nitrate and secondary sulfate sources were linked to mortality in DJ. This could be attributed to the deep inland location, which might have facilitated formation of secondary inorganic aerosols. In addition, primary sources including mobile and coal combustion seemed to have acute impacts on respiratory mortality in Gwangju. Our findings suggest the necessity of positive matrix factorization (PMF)-based approaches for evaluating health effects of PM2.5 while considering the spatial heterogeneity in the compositions and source contributions of PM2.5.

Three-dimensional analysis of tooth movement in Class II malocclusion treatment using arch wire with continuous tip-back bends and intermaxillary elastics.

OBJECTIVE: The aim of this study was to analyze three-dimensional (3D) changes in maxillary dentition in Class II malocclusion treatment using arch wire with continuous tip-back bends or compensating curve, together with intermaxillary elastics by superimposing 3D virtual models. METHODS: The subjects were 20 patients (2 men and 18 women; mean age 20 years 7 months ± 3 years 9 months) with Class II malocclusion treated using 0.016 × 0.022-inch multiloop edgewise arch wire with continuous tip-back bends or titanium molybdenum alloy ideal arch wire with compensating curve, together with intermaxillary elastics. Linear and angular measurements were performed to investigate maxillary teeth displacement by superimposing pre- and post-treatment 3D virtual models using Rapidform 2006 and analyzing the results using paired t-tests. RESULTS: There were posterior displacement of maxillary teeth (p < 0.01) with distal crown tipping of canine, second premolar and first molar (p < 0.05), expansion of maxillary arch (p < 0.05) with buccoversion of second premolar and first molar (p < 0.01), and distal-in rotation of first molar (p < 0.01). Reduced angular difference between anterior and posterior occlusal planes (p < 0.001), with extrusion of anterior teeth (p < 0.05) and intrusion of second premolar and first molar (p < 0.001) was observed. CONCLUSIONS: Class II treatment using an arch wire with continuous tip-back bends or a compensating curve, together with intermaxillary elastics, could retract and expand maxillary dentition, and reduce occlusal curvature. These results will help clinicians in understanding the mechanism of this Class II treatment.

An Aqueous Extract from Batillus Cornutus Meat Protects Against H2O2-Mediated Cellular Damage via Up-Regulation of Nrf2/HO-1 Signal Pathway in Chang Cells.

In this study, we evaluated the protective effects of an aqueous extract from Batillus cornutus meat (BM) against cellular oxidative damage caused by hydrogen peroxide (H2O2) in human hepatocyte, Chang cells. First, we prepared an aqueous extract of BM meat (BMW) showing the highest taurine content among free amino acid contents. BMW led to high antioxidant activity showing 2,2-azino-bis(3-ethylbenzthiazoline)-6-sulfonic acid (ABTS) radical scavenging activity, good reducing power and an oxygen radical absorbance capacity (ORAC) value. Also, BMW improved cell viability that was diminished by H2O2 exposure, as it reduced the generation of intracellular reactive oxygen species (ROS) in Chang cells. In addition, BMW up-regulated the production of antioxidant enzymes, such as catalase and superoxide dismutase (SOD), compared to H2O2-treated Chang cells lacking BMW. Moreover, BMW induced the expressions of nuclear Nrf2 and cytosolic HO-1 in H2O2-treated Chang cells. Interestingly, the treatment of ZnPP, HO-1 inhibitor, abolished the improvement in cell viability and intracellular ROS generation mediated by BMW treatment. In conclusion, this study suggests that BMW protects hepatocytes against H2O2-mediated cellular oxidative damage via up-regulation of the Nrf2/HO-1 signal pathway.

Antioxidant Effects of an Alcalase Hydrolysate from Batillus cornutus Meat.

Batillus cornutus (B. cornutus) is one of the gastropoda, which are distributed along the coast of China, Japan and South Korea and northeast area. In this study, we first identified the antioxidant effects of a B. cornutus meat (BM) enzymatic hydrolysate in H2O2-treated Vero cells. First of all, we prepared an Alcalase hydrolysate from BM (BMA) and revealed a high taurine content. Also, taurine rich BMA dose-dependently increased 2,2-azino-bis(3-ethylbenzthiazoline)-6-sulfonic acid (ABTS) radical scavenging activity, reducing power and the higher oxygen radical absorbance capacity (ORAC) value. In addition, BMA significantly increased the cell viability via the down-regulation of intracellular reactive oxygen species (ROS) production, as well as the decreased formation of apoptotic bodies and sub-G1 DNA population in H2O2-treated Vero cells. Furthermore, BMA increased the expression of the anti-apoptotic molecule, Bcl-2, and decreased the expressions of Bax, p53 and cleaved PARP, all of which are pro-apoptotic molecules, in H2O2-treated Vero cells. Based on these results, this study suggests that BMA may be used as a potential protector on damage caused by oxidative stress.

Cytoprotective Effects of an Aqueous Extracts from Atrina Pectinate Meat in H2O2-Induced Oxidative Stress in a Human Hepatocyte.

In the present study, we investigated the antioxidant activity of an aqueous extract from Atrina pectinate meat (APW) against H2O2-induced oxidative stress in a human hepatocyte. The extraction yield of APW was 30.01 ± 0.83% and which contained the highest taurine content among free amino acid contents. APW led to the high antioxidant activity showing 2,2-azino-bis(3-ethylbenzthiazoline)-6-sulfonic acid (ABTS) radical scavenging activity, good reducing power and oxygen radical absorbance capacity (ORAC) value. Also, the results showed that APW improved the cell viability decreased by H2O2 stimulation as well as the reduction of intracellular reactive oxygen species (ROS) generation in hepatocytes. Additionally, APW up-regulated the production of antioxidant mechanisms related enzymes such as catalase and superoxide dismutase (SOD), compared to the only H2O2-treated hepatocytes. Moreover, APW increased the expressions of nuclear Nrf2 and cytosolic HO-1 in H2O2-treated hepatocytes. Interestingly, the treatment of ZnPP, a HO-1 inhibitor abolished the cell viability and intracellular ROS generation induced by APW treatment. In conclusion, this study suggests that APW protects H2O2 induced oxidative stress via up-regulating of Nrf2/HO-1 signal pathway in hepatocytes.

Radio-Protective Effects of Loliolus beka Gray Meat Consisted of a Plentiful Taurine Against Damages Caused by Gamma Ray Irradiation.

Gamma ray irradiation causes immune suppression, in which oxidative stress reduces cell viability and damages immune cells. In the present study, we investigated whether Loliolus beka gray meat (LBM), which contains large amounts of taurine, protects against damage of murine splenocytes by oxidative stress. An aqueous extract of LBM (LBMW) was prepared, which contained plentiful levels of taurine. LBMW improved cell viability of gamma ray-irradiated murine splenocytes, an effect that was associated with significant reduction in the production of reactive oxygen species (ROS). We also showed that the production of nitric oxide (NO) and ROS in gamma ray-irradiated zebrafish embryos, as well as the death of the embryos, were diminished by LBMW. These data suggest that the consumption of taurine-rich foods, such as LBM, may be used in the protection of cells against oxidative stress.

Cone-beam computed tomography analysis of transverse dental compensation in patients with skeletal Class III malocclusion and facial asymmetry.

OBJECTIVE: The purpose of this study was to analyze the transverse dental compensation in reference to the maxillary and mandibular basal bones using cone-beam computed tomography (CBCT) and evaluate the correlations between transverse dental compensation and skeletal asymmetry variables in patients with skeletal Class III malocclusion and facial asymmetry. METHODS: Thirty patients with skeletal Class I (control group; 15 men, 15 women) and 30 patients with skeletal Class III with menton deviation (asymmetry group; 16 men, 14 women) were included. Skeletal and dental measurements were acquired from reconstructed CBCT images using OnDemand3D 1.0 software. All measurements were compared between groups and between the deviated and nondeviated sides of the asymmetry group. Correlation coefficients for the association between skeletal and dental measurements were calculated. RESULTS: Differences in the ramus inclination (p < 0.001), maxillary canine and first molar inclinations (p < 0.001), and distances from the canine and first molar cusp tips to the midmaxillary or midmandibular planes (p < 0.01) between the right and left sides were significantly greater in the asymmetry group than in the control group. In the asymmetry group, the ramus inclination difference (p < 0.05) and mandibular canting (p < 0.05) were correlated with the amount of menton deviation. In addition, dental measurements were positively correlated with the amount of menton deviation (p < 0.05). CONCLUSIONS: Transverse dental compensation was correlated with the maxillary and mandibular asymmetry patterns. These results would be helpful in understanding the pattern of transverse dental compensation and planning surgical procedure for patients with skeletal Class III malocclusion and facial asymmetry.

Clinical and genomic landscape of gastric cancer with a mesenchymal phenotype.

Gastric cancer is a heterogeneous cancer, making treatment responses difficult to predict. Here we show that we identify two distinct molecular subtypes, mesenchymal phenotype (MP) and epithelial phenotype (EP), by analyzing genomic and proteomic data. Molecularly, MP subtype tumors show high genomic integrity characterized by low mutation rates and microsatellite stability, whereas EP subtype tumors show low genomic integrity. Clinically, the MP subtype is associated with markedly poor survival and resistance to standard chemotherapy, whereas the EP subtype is associated with better survival rates and sensitivity to chemotherapy. Integrative analysis shows that signaling pathways driving epithelial-to-mesenchymal transition and insulin-like growth factor 1 (IGF1)/IGF1 receptor (IGF1R) pathway are highly activated in MP subtype tumors. Importantly, MP subtype cancer cells are more sensitive to inhibition of IGF1/IGF1R pathway than EP subtype. Detailed characterization of these two subtypes could identify novel therapeutic targets and useful biomarkers for prognosis and therapy response.

Effect of carbonated water manufactured by a soda carbonator on etched or sealed enamel.

OBJECTIVE: The purpose of this study was to determine the effects of carbonated water on etched or sealed enamel according to the carbonation level and the presence of calcium ions. METHODS: Carbonated water with different carbonation levels was manufactured by a soda carbonator. Seventy-five premolar teeth were randomly divided into a control group and 4 experimental groups in accordance with the carbonation level and the presence of calcium ions in the test solutions. After specimen preparation of the Unexposed, Etched, and Sealed enamel subgroups, all the specimens were submerged in each test solution for 15 minutes three times a day during 7 days. Microhardness tests on the Unexposed and Etched enamel subgroups were performed with 10 specimens from each group. Scanning electron microscopy (SEM) tests on the Unexposed, Etched, and Sealed enamel subgroups were performed with 5 specimens from each group. Microhardness changes in different groups were statistically compared using paired t-tests, the Wilcoxon signed rank test, and the Kruskal-Wallis test. RESULTS: The microhardness changes were significantly different between the groups (p = 0.000). The microhardness changes in all experimental groups except Group 3 (low-level carbonated water with calcium ions) were significantly greater than those in the Control group. SEM showed that etched areas of the specimen were affected by carbonated water and the magnitude of destruction varied between groups. Adhesive material was partially removed in groups exposed to carbonated water. CONCLUSIONS: Carbonated water has negative effects on etched or sealed enamel, resulting in decreased microhardness and removal of the adhesive material.

Effectiveness of pulsed electromagnetic field for pain caused by placement of initial orthodontic wire in female orthodontic patients: A preliminary single-blind randomized clinical trial.

INTRODUCTION: The purpose of this 2-arm parallel trial was to assess the effects of pulsed electromagnetic field (PEMF) on the reduction of pain caused by initial orthodontic tooth movement. METHODS: Thirty-three female patients (mean age, 16.8 ± 3.8 years) who began orthodontic treatment using fixed appliances were examined. In the pilot study, male patients were less likely to use the PEMF device (epatchQ; Speed Dental, Seoul, Korea) and answer a survey consistently, so eligibility criteria were female patients who were periodontally and systemically healthy at the initiation of treatment and had no history of dental pain in the prior 2 weeks or who used no medications (anti-inflammatory or analgesic drugs) during the experiment period. Each patient had brackets bonded on the maxillary teeth, and a 0.014-in nickel-titanium archwire was tied with elastomeric rings. Their maxillary arches were randomly divided into left and right sides in a split-mouth design: a normal PEMF device (experimental group) was used on 1 side, and a PEMF device with an inversely inserted battery (placebo group) was used on the opposite side of the arch for 7 hours on 3 consecutive nights. A Google survey link was sent to the patients' mobile phones via text message, and they were instructed to record their current pain on the survey. The survey was sent a total of 6 times after insertion of the initial archwire at 0 (T0), 2 (T1), 6 (T2), 24 (T3), 48 (T4), and 72 (T5) hours. Patients recorded the degree of pain in resting and clenching states using a numeric rating scale (NRS) from 1 (no pain) to 10 (worst pain). PEMF devices were used after T2. Generalized linear mixed models, along with ancillary pairwise analyses, were used to model and evaluate the differences in pain reported over 72 hours. RESULTS: The NRS scores did not differ across the groups during the before-PEMF phase for resting (mean difference, -0.07; 95% confidence interval [CI], -0.73 to 0.59; P = 0.842) and clenching (mean difference, -0.28; 95% CI, -1.11 to 0.56, P = 0.513). During the after-PEMF phase, NRS scores in the experimental group were significantly lower than those in the placebo group during both resting (mean difference, -1.46; 95% CI, -2.06 to -0.85; P = <0.001) and clenching (mean difference, -1.88; 95% CI, -2.74 to -1.02, P = <0.001). The NRS scores did not differ across the groups during the before-PEMF phase for either state but were significantly lower in the experimental group than in the placebo group at T3, T4, and T5 (P <0.01). The average NRS score in the clenching state was significantly greater than in the resting state. CONCLUSIONS: PEMF was effective in reducing orthodontic pain caused by initial archwire placement. REGISTRATION: The trial was not registered. PROTOCOL: The protocol was not published before trial commencement.

4-O-Methylhonokiol Protects HaCaT Cells from TGF-ß1-Induced Cell Cycle Arrest by Regulating Canonical and Non-Canonical Pathways of TGF-ß Signaling.

4-O-methylhonokiol, a neolignan compound from Magnolia Officinalis, has been reported to have various biological activities including hair growth promoting effect. However, although transforming growth factor-ß (TGF-ß) signal pathway has an essential role in the regression induction of hair growth, the effect of 4-O-methylhonokiol on the TGF-ß signal pathway has not yet been elucidated. We thus examined the effect of 4-O-methylhonokiol on TGF-ß-induced canonical and noncanonical pathways in HaCaT human keratinocytes. When HaCaT cells were pretreated with 4-O-methylhonokiol, TGF-ß1-induced G1/G0 phase arrest and TGF-ß1-induced p21 expression were decreased. Moreover, 4-O-methylhonokiol inhibited nuclear translocation of Smad2/3, Smad4 and Sp1 in TGF-ß1-induced canonical pathway. We observed that ERK phosphorylation by TGF-ß1 was significantly attenuated by treatment with 4-O-methylhonokiol. 4-O-methylhonokiol inhibited TGF-ß1-induced reactive oxygen species (ROS) production and reduced the increase of NADPH oxidase 4 (NOX4) mRNA level in TGF-ß1-induced noncanonical pathway. These results indicate that 4-O-methylhonokiol could inhibit TGF-ß1-induced cell cycle arrest through inhibition of canonical and noncanonical pathways in human keratinocyte HaCaT cell and that 4-O-methylhonokiol might have protective action on TGF-ß1-induced cell cycle arrest.

GALNT14 promotes lung-specific breast cancer metastasis by modulating self-renewal and interaction with the lung microenvironment.

Some polypeptide N-acetyl-galactosaminyltransferases (GALNTs) are associated with cancer, but their function in organ-specific metastasis remains unclear. Here, we report that GALNT14 promotes breast cancer metastasis to the lung by enhancing the initiation of metastatic colonies as well as their subsequent growth into overt metastases. Our results suggest that GALNT14 augments the self-renewal properties of breast cancer cells (BCCs). Furthermore, GALNT14 overcomes the inhibitory effect of lung-derived bone morphogenetic proteins (BMPs) on self-renewal and therefore facilitates metastasis initiation within the lung microenvironment. In addition, GALNT14 supports continuous growth of BCCs in the lung by not only inducing macrophage infiltration but also exploiting macrophage-derived fibroblast growth factors (FGFs). Finally, we identify KRAS-PI3K-c-JUN signalling as an upstream pathway that accounts for the elevated expression of GALNT14 in lung-metastatic BCCs. Collectively, our findings uncover an unprecedented role for GALNT14 in the pulmonary metastasis of breast cancer and elucidate the underlying molecular mechanisms.

Relationship between maturation indices and morphology of the midpalatal suture obtained using cone-beam computed tomography images.

OBJECTIVE: The purpose of this study was to determine whether predicting maturation of the midpalatal suture is possible by classifying its morphology on cone-beam computed tomography (CBCT) images and to investigate relationships with other developmental age indices. METHODS: The morphology of the midpalatal suture was assessed by using CBCT images of 99 patients. Axial plane images of the midpalatal suture were classified into five stages according to the classification scheme. To make the assessment more accurate, the morphology and fusion of the midpalatal suture were additionally investigated on coronal cross-sectional planar images and volume-rendered images. Bone age was evaluated using the hand and wrist method (HWM) and cervical vertebrae method (CVM); dental age (Hellman's index), sex, and chronological age were also assessed. To evaluate relationships among variables, Spearman's rho rank test was performed along with crosstabs using contingency coefficients. RESULTS: The HWM and CVM showed strong correlations with the maturation stage of the midpalatal suture, while other indices showed relatively weak correlations (p < 0.01). Through crosstabs, the HWM and CVM showed high association values with CBCT stage; the HWM demonstrated slightly higher values (p < 0.0001). Based on the HWM, the midpalatal suture was not fused until stage 6 in both sexes. CONCLUSIONS: Among developmental age indices, the HWM and CVM showed strong correlations and high associations, suggesting that they can be useful in assessing maturation of the midpalatal suture.

Comparison of the bonding strengths of second- and third-generation light-emitting diode light-curing units.

OBJECTIVE: With the introduction of third-generation light-emitting diodes (LEDs) in dental practice, it is necessary to compare their bracket-bonding effects, safety, and efficacy with those of the second-generation units. METHODS: In this study, 80 extracted human premolars were randomly divided into eight groups of 10 samples each. Metal or polycrystalline ceramic brackets were bonded on the teeth using second- or third-generation LED light-curing units (LCUs), according to the manufacturers' instructions. The shear bond strengths were measured using the universal testing machine, and the adhesive remnant index (ARI) was scored by assessing the residual resin on the surfaces of debonded teeth using a scanning electron microscope. In addition, curing times were also measured. RESULTS: The shear bond strengths in all experimental groups were higher than the acceptable clinical shear bond strengths, regardless of the curing unit used. In both LED LCU groups, all ceramic bracket groups showed significantly higher shear bond strengths than did the metal bracket groups except the plasma emulation group which showed no significant difference. When comparing units within the same bracket type, no differences in shear bond strength were observed between the second- and third-generation unit groups. Additionally, no significant differences were observed among the groups for the ARI. CONCLUSIONS: The bracket-bonding effects and ARIs of second- and third-generation LED LCUs showed few differences, and most were without statistical significance; however, the curing time was shorter for the second-generation unit.

Bone cutting capacity and osseointegration of surface-treated orthodontic mini-implants.

OBJECTIVE: The objective of the study was to evaluate the practicality and the validity of different surface treatments of self-drilling orthodontic mini-implants (OMIs) by comparing bone cutting capacity and osseointegration. METHODS: Self-drilling OMIs were surface-treated in three ways: Acid etched (Etched), resorbable blasting media (RBM), partially resorbabla balsting media (Hybrid). We compared the bone cutting capacity by measuring insertion depths into artificial bone (polyurethane foam). To compare osseointegration, OMIs were placed in the tibia of 25 rabbits and the removal torque value was measured at 1, 2, 4, and 8 weeks after placement. The specimens were analyzed by optical microscopy, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). RESULTS: The bone cutting capacity of the etched and hybrid group was lower than the machined (control) group, and was most inhibited in the RBM group (p < 0.05). At 4 weeks, the removal torque in the machined group was significantly decreased (p < 0.05), but was increased in the etched group (p < 0.05). In the hybrid group, the removal torque significantly increased at 2 weeks, and was the highest among all measured values at 8 weeks (p < 0.05). The infiltration of bone-like tissue surface was evaluated by SEM, and calcium and phosphorus were detected via EDS only in the hybrid group. CONCLUSIONS: Partial RBM surface treatment (hybrid type in this study) produced the most stable self-drilling OMIs, without a corresponding reduction in bone cutting capacity.

Forced eruption of impacted maxillary central incisors with severely dilacerated roots.

Treatment of impacted dilacerated incisors is challenging for clinicians because of the prominent position of the teeth and the abnormality of their roots. We report on 2 patients who had horizontally upward impacted and severely dilacerated maxillary central incisors. The first patient's root perforated the labial plate without significant resorption, and the second patient's root was resorbed. Both patients were treated by a surgical-orthodontic approach, and the crowns of the impacted teeth were brought into the arches by closed forced eruption. Therefore, if impacted teeth have dilacerated roots, patients should be told of the possibility of root resorption.

Three-dimensional evaluation of tooth movement in Class II malocclusions treated without extraction by orthodontic mini-implant anchorage.

OBJECTIVE: The aim of this study was to analyze tooth movement and arch width changes in maxillary dentition following nonextraction treatment with orthodontic mini-implant (OMI) anchorage in Class II division 1 malocclusions. METHODS: Seventeen adult patients diagnosed with Angle's Class II division 1 malocclusion were treated by nonextraction with OMIs as anchorage for distalization of whole maxillary dentition. Three-dimensional virtual maxillary models were superimposed with the best-fit method at the pretreatment and post-treatment stages. Linear, angular, and arch width variables were measured using Rapidform 2006 software, and analyzed by the paired t-test. RESULTS: All maxillary teeth showed statistically significant movement posteriorly (p < 0.05). There were no significant changes in the vertical position of the maxillary teeth, except that the second molars were extruded (0.86 mm, p < 0.01). The maxillary first and second molars were rotated distal-in (4.5°, p < 0.001; 3.0°, p < 0.05, respectively). The intersecond molar width increased slightly (0.1 mm, p > 0.05) and the intercanine, interfirst premolar, intersecond premolar, and interfirst molar widths increased significantly (2.2 mm, p < 0.01; 2.2 mm, p < 0.05; 1.9 mm, p < 0.01; 2.0 mm, p < 0.01; respectively). CONCLUSIONS: Nonextraction treatment with OMI anchorage for Class II division 1 malocclusions could retract the whole maxillary dentition to achieve a Class I canine and molar relationship without a change in the vertical position of the teeth; however, the second molars were significantly extruded. Simultaneously, the maxillary arch was shown to be expanded with distal-in rotation of the molars.

Bone density effects on the success rate of orthodontic microimplants evaluated with cone-beam computed tomography.

INTRODUCTION: The purpose of this study was to evaluate the effect of bone densities on the success rate of orthodontic microimplants with cone-beam computed tomography images. METHODS: We examined 127 orthodontic microimplants implanted into the maxillary buccal alveolar bone of 71 patients (53 female, 18 male; mean age, 19.2 years) with malocclusion. The cortical, cancellous, and total bone densities were measured with Simplant Pro 2011 software (version 13; Materialise, Leuven, Belgium), and the correlations between these measurements and the orthodontic microimplant success rates were evaluated with cone-beam computed tomography. RESULTS: The overall success rate was 85.0% (108 of 127). Sex, age, and side of placement were not significant factors for success in the results (P >0.05). The density of the cortical bone increased apically (3, 5, and 7 mm) from the alveolar crest, but in the cancellous bone it decreased. Whereas the orthodontic microimplant success rates significantly increased as cancellous bone density and total bone density increased (P <0.01), cortical bone density did not have a significant effect on the success rate (P >0.05). CONCLUSIONS: The success rate of orthodontic microimplants significantly increased with higher cancellous and total bone densities, whereas cortical bone density did not have a significant effect.