Organic Upgrading through Photoelectrochemical Reactions: Toward Higher Profits.

Aqueous photoelectrochemical (PEC) cells have long been considered a promising technology to convert solar energy into hydrogen. However, the solar-to-H2 (STH) efficiency and cost-effectiveness of PEC water splitting are significantly limited by sluggish oxygen evolution reaction (OER) kinetics and the low economic value of the produced O2 , hindering the practical commercialization of PEC cells. Recently, organic upgrading PEC reactions, especially for alternative OERs, have received tremendous attention, which improves not only the STH efficiency but also the economic effectiveness of the overall reaction. In this review, PEC reaction fundamentals and reactant-product cost analysis of organic upgrading reactions are briefly reviewed, recent advances made in organic upgrading reactions, which are categorized by their reactant substrates, such as methanol, ethanol, glycol, glycerol, and complex hydrocarbons, are then summarized and discussed. Finally, the current status, further outlooks, and challenges toward industrial applications are discussed.

Polytypic Two-Dimensional FeAs with High Anisotropy.

In the realm of two-dimensional (2D) crystal growth, the chemical composition often determines the thermodynamically favored crystallographic structures. This relationship poses a challenge in synthesizing novel 2D crystals without altering their chemical elements, resulting in the rarity of achieving specific crystallographic symmetries or lattice parameters. We present 2D polymorphic FeAs crystals that completely differ from bulk orthorhombic FeAs (Pnma), differing in the stacking sequence, i.e., polytypes. Preparing polytypic FeAs outlines a strategy for independently controlling each symmetry operator, which includes the mirror plane for 2Q-FeAs (I4/mmm) and the glide plane for 1Q-FeAs (P4/nmm). As such, compared to bulk FeAs, polytypic 2D FeAs shows highly anisotropic properties such as electrical conductivity, Young's modulus, and friction coefficient. This work represents a concept of expanding 2D crystal libraries with a given chemical composition but various crystal symmetries.

Nontypical Wulff-Shape Silicon Nanosheets with High Catalytic Activity.

Nanostructured silicon with an equilibrium shape has exhibited hydrogen evolution reaction activity mainly owing to its high surface area, which is distinct from that of bulk silicon. Such a Wulff shape of silicon favors low-surface-energy planes, resulting in silicon being an anisotropic and predictably faceted solid in which certain planes are favored, but this limits further improvement of the catalytic activity. Here, we introduce nanoporous silicon nanosheets that possess high-surface-energy crystal planes, leading to an unconventional Wulff shape that bolsters the catalytic activity. The high-index plane, uncommonly seen in the Wulff shape of bulk Si, has a band structure optimally aligned with the redox potential necessary for hydrogen generation, resulting in an apparent quantum yield (AQY) of 12.1% at a 400 nm wavelength. The enhanced light absorption in nanoporous silicon nanosheets also contributes to the high photocatalytic activity. Collectively, the strategy of making crystals with nontypical Wulff shapes can provide a route toward various classes of photocatalysts for hydrogen production.

Enhanced H2O2 Upcycling into Hydroxyl Radicals with GO/Ni:FeOOH-Coated Silicon Nanowire Photocatalysts for Wastewater Treatment.

There remains continued interest in improving the advanced water oxidation process [e.g., ultraviolet (UV)/hydrogen peroxide (H2O2)] for more efficient and environmentally friendly wastewater treatment. Here, we report the design, fabrication, and performance of graphene oxide (GO, on top)/nickel-doped iron oxyhydroxide (Ni:FeOOH, shell)/silicon nanowires (SiNWs, core) as a new multifunctional photocatalyst for the degradation of common pollutants like polystyrene and methylene blue through enhancing the hydroxyl radical (•OH) production rate of the UV/H2O2 system. The photocatalyst combines the advantages of a large surface area and light absorption characteristics of SiNWs with heterogeneous photo-Fenton active Ni:FeOOH and photocatalytically active/charge separator GO. In addition, the built-in electric field of GO/Ni:FeOOH/SiNWs facilitates the charge separation of electrons to GO and holes to Ni:FeOOH, thus boosting the photocatalytic performance. Our photocatalyst increases the •OH yield by 5.7 times compared with that of a blank H2O2 solution sample and also extends the light absorption spectrum to include visible light irradiation.

Photo-Electrochemical Glycerol Conversion over a Mie Scattering Effect Enhanced Porous BiVO4 Photoanode.

The photo-electrochemical (PEC) oxidation of glycerol (GLY) to high-value-added dihydroxyacetone (DHA) can be achieved over a BiVO4 photoanode, while the PEC performance of most BiVO4 photoanodes is impeded due to the upper limits of the photocurrent density. Here, an enhanced Mie scattering effect of the well-documented porous BiVO4 photoanode is obtained with less effort by a simple annealing process, which significantly reduces the reflectivity to near zero. The great light absorbability increases the basic photocurrent density by 1.77 times. The selective oxidation of GLY over the BiVO4 photoanode results in a photocurrent density of 6.04 mA cm-2 and a DHA production rate of 325.2 mmol m-2 h-1 that exceeds all reported values. This work addresses the poor ability of nanostructured BiVO4 to harvest light, paving the way for further improvements in charge transport and transfer to realize highly efficient PEC conversion.

Extreme Ion-Transport Inorganic 2D Membranes for Nanofluidic Applications.

Inorganic 2D materials offer a new approach to controlling mass diffusion at the nanoscale. Controlling ion transport in nanofluidics is key to energy conversion, energy storage, water purification, and numerous other applications wherein persistent challenges for efficient separation must be addressed. The recent development of 2D membranes in the emerging field of energy harvesting, water desalination, and proton/Li-ion production in the context of green energy and environmental technology is herein discussed. The fundamental mechanisms, 2D membrane fabrication, and challenges toward practical applications are highlighted. Finally, the fundamental issues of thermodynamics and kinetics are outlined along with potential membrane designs that must be resolved to bridge the gap between lab-scale experiments and production levels.

Characteristics of recent HIV infection among individuals newly diagnosed as HIV-positive in South Korea (2008-2015).

Most HIV-positive individuals diagnosed in Korea are infected through sexual contact, with the time of HIV infection therefore often being unknown. The aim of this study was to investigate the characteristics of diagnosed patients near the time of HIV seroconversion to establish useful HIV intervention strategies. Cross-sectional study. Newly diagnosed HIV cases based on the national HIV surveillance system in South Korea, 2008-2015. To distinguish recent from long-standing HIV infection among 5898 nationwide HIV-positive specimens, limiting antigen avidity assays (Sedia HIV-1 LAg-Avidity EIA, cut-off = 1.5) were performed. Data on CD4+ T cell count at HIV diagnosis and death from AIDS within one year after first HIV diagnosis were used to distinguish recent HIV infections. Acute HIV infection is characterized by detectable HIV RNA or HIV p24 antigen levels, along with a negative or indeterminate antibody western blot result, but with the subject subsequently testing positive after a predetermined period. We analyzed the characteristics of recent and acute HIV infections by sex, age, nationality, HIV testing site, region, and reason for HIV testing. Recent and acute HIV infections were described as the proportion of recent and acute HIV infections among newly-diagnosed cases in a given year. Recent and acute HIV infections over the 8-year study period were 20.5% (1210/5898) and 9.5% (562/5898), respectively. Both infections were generally higher in the following groups: males, younger age, Koreans, individuals who were tested due to disease, residents of smaller city or rural area, and individuals diagnosed in recent calendar years. Acute infections were significantly higher among individuals tested in hospitals and due to suspected HIV infection. The recent and acute HIV infection in younger age groups (< 30 years) has been increasing in a given year. There was an increase in the proportion of young individuals with recent HIV infection, and we identified risk groups more at risk of HIV infection recently in Korea. Therefore, our results could prove useful for the development and assessment of national HIV prevention strategies in Korea and provide valuable data for further HIV research.

Binary-state scanning probe microscopy for parallel imaging.

Scanning probe microscopy techniques, such as atomic force microscopy and scanning tunnelling microscopy, are harnessed to image nanoscale structures with an exquisite resolution, which has been of significant value in a variety of areas of nanotechnology. These scanning probe techniques, however, are not generally suitable for high-throughput imaging, which has, from the outset, been a primary challenge. Traditional approaches to increasing the scalability have involved developing multiple probes for imaging, but complex probe design and electronics are required to carry out the detection method. Here, we report a probe-based imaging method that utilizes scalable cantilever-free elastomeric probe design and hierarchical measurement architecture, which readily reconstructs high-resolution and high-throughput topography images. In a single scan, we demonstrate imaging with a 100-tip array to obtain 100 images over a 1-mm2 area with 106 pixels in less than 10 min. The potential for large-scale tip integration and the advantage of a simple probe array suggest substantial promise for our approach to high-throughput imaging far beyond what is currently possible.

Longitudinal Assessment of Antisevere Acute Respiratory Syndrome Coronavirus 2 Immune Responses for Six Months Based on the Clinical Severity of Coronavirus Disease 2019.

BACKGROUND: There is insufficient data on the longevity of immunity acquired after severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection. METHODS: We aimed to evaluate the duration of SARS-CoV-2-specific humoral and cellular immunity according to the clinical severity of coronavirus disease 2019 (COVID-19). The study population comprised asymptomatic (n = 14), symptomatic/nonpneumonic (n = 42), and pneumonic (n = 41) patients. RESULTS: The anti-SARS-CoV-2 immunoglobulin class G and neutralizing antibody (NAb) titers lasted until 6 months after diagnosis, with positivity rates of 66.7% and 86.9%, respectively. Older age, prolonged viral shedding, and accompanying pneumonia were more frequently found in patients with sustained humoral immunity. Severe acute respiratory syndrome coronavirus 2-specific T-cell response was strongly observed in pneumonic patients and prominent in individuals with sustained humoral immunity. CONCLUSIONS: In conclusion, most (>85%) patients carry NAb until 6 months after diagnosis of SARS-CoV-2 infection, providing insights for establishing vaccination strategies against COVID-19.

Enhancing Li Ion Battery Performance by Mechanical Resonance.

The quest for safe and high-performance Li ion batteries (LIBs) motivates intense efforts seeking a high-energy but reliable anode, cathode, and nonflammable electrolyte. For any of these, exploring new electrochemistry methods that enhance safety and performance by employing well-designed electrodes and electrolytes are required. Electrolyte wetting, governed by thermodynamics, is another critical issue in increasing Li ion transport through the separator. Herein, we report an approach to enhancing LIB performance by applying mechanical resonant vibration to increase electrolyte wettability on the separator. Wetting is activated at a resonant frequency with a capillary wave along the surface of the electrolyte, allowing the electrolyte to infiltrate into the porous separator by inertia force. This mechanical resonance, rather than electrochemistry, leads to the high specific capacity, rate capability, and cycling stability of LIBs. The concept of the mechanical approach is a promising yet simple strategy for the development of safer LIBs using liquid electrolytes.

Disordered-Layer-Mediated Reverse Metal-Oxide Interactions for Enhanced Photocatalytic Water Splitting.

In heterogeneous catalysts, metal-oxide interactions occur spontaneously but often in an undesired way leading to the oxidation of metal nanoparticles. Manipulating such interactions to produce highly active surface of metal nanoparticles can warrant the optimal catalytic activity but has not been established to date. Here we report that a prior reduced TiO2 support can reverse the interaction with Pt nanoparticles and augment the metallic state of Pt, exhibiting a 3-fold increase in hydrogen production rate compared to that of conventional Pt/TiO2. Spatially resolved electron energy loss spectroscopy of the Ti valence state and the electron density distribution within Pt nanoparticles provide direct evidence supporting that the Pt/TiO2/H2O triple junctions are the most active catalytic sites for water reduction. Our reverse metal-oxide interaction scheme provides a breakthrough in the stagnated hydrogen production efficiency and can be applied to other heterogeneous catalyst systems composed of metal nanoparticles with reducible oxide supports.

Layered Aluminum for Electromagnetic Wave Absorber with Near-Zero Reflection.

Ideal electromagnetic (EM) wave absorbers can absorb all incident EM waves, regardless of the incident direction, polarization, and frequency. Absorptance and reflectance are intrinsic material properties strongly correlated with electrical conductivity; hence, achieving perfect absorptance with zero reflectance is challenging. Herein, we present a design strategy for preparing a nearly ideal EM absorber based on a layered metal that maximizes absorption by utilizing multiple internal reflections and minimizes reflection using a monotonic gradient of intrinsic impedance. This approach was experimentally verified using aluminum nanoflakes prepared via topochemical etching of lithium from Li9Al4, and the impedance-graded structure was obtained through the size-based sorting behavior of aluminum nanoflakes sinking in dispersion. Unlike in traditional shielding materials, strong absorption (26.76 dB) and negligible reflectivity (0.04 dB) with a ratio of >103 can be achieved in a 120 µm thick film. Overall, our findings exhibit potential for developing a novel class of antireflective shielding materials.

Neuromorphic van der Waals crystals for substantial energy generation.

Controlling ion transport in nanofluidics is fundamental to water purification, bio-sensing, energy storage, energy conversion, and numerous other applications. For any of these, it is essential to design nanofluidic channels that are stable in the liquid phase and enable specific ions to pass. A human neuron is one such system, where electrical signals are transmitted by cation transport for high-speed communication related to neuromorphic computing. Here, we present a concept of neuro-inspired energy harvesting that uses confined van der Waals crystal and demonstrate a method to maximise the ion diffusion flux to generate an electromotive force. The confined nanochannel is robust in liquids as in neuron cells, enabling steady-state ion diffusion for hundred of hours and exhibiting ion selectivity of 95.8%, energy conversion efficiency of 41.4%, and power density of 5.26 W/m2. This fundamental understanding and rational design strategy can enable previously unrealisable applications of passive-type large-scale power generation.

Sparked Reduced Graphene Oxide for Low-Temperature Sodium-Beta Alumina Batteries.

Wetting Na metal on the solid electrolyte of a liquid Na battery determines the operating temperature and performance of the battery. At low temperatures below 200 °C, liquid Na wets poorly on a solid electrolyte near its melting temperature (Tm = 98 °C), limiting its suitability for use in low-temperature batteries used for large-scale energy-storage systems. Herein, we propose the use of sparked reduced graphene oxide (rGO) that can improve the Na wetting in sodium-beta alumina batteries (NBBs), allowing operation at lower temperatures. Experimental and computational studies indicated rGO layers with nanogaps exhibited complete liquid Na wetting regardless of the surface energy between the liquid Na and the graphene oxide, which originated from the capillary force in the gap. Employing sparked rGO significantly enhanced the cell performance at 175 °C; the cell retained almost 100% Coulombic efficiency after the initial cycle, which is a substantial improvement over cells without sparked rGO. These results suggest that coating sparked rGO is a promising but simple strategy for the development of low-temperature NBBs.

Heterojunction Photoanode of Atomic-Layer-Deposited MoS2 on Single-Crystalline CdS Nanorod Arrays.

Cadmium sulfide (CdS) is a semiconducting absorber for photoelectrochemical (PEC) hydrogen production with suitable electronic band structures. However, it suffers from severe photocorrosion and rapid charge recombination during the desired PEC reactions. Herein, we describe the identification of the optimal junction thickness of CdS/MoS2 core/sheath heterojunction nanostructures by employing atomic layer deposition (ALD) techniques. ALD-grown MoS2 sheath layers with different thicknesses were realized on single-crystalline CdS nanorod (NR) arrays on transparent conducting oxide substrates. We further monitored the resulting solar H2 evolution performance with our heterojunction photoanodes. The results showed that the junction thickness of MoS2 plays a key role in the reduction of photocorrosion and the enhanced photocurrent density by optimizing the charge separation. A better saturation photocurrent (∼46%) was obtained with the 7 nm-thick MoS2@CdS NRs than that with the bare CdS NRs. Moreover, the external quantum efficiency was increased twofold over that of the pristine CdS NRs. The ALD-grown MoS2@CdS heterojunction structures provides an efficient and versatile platform for hydrogen production when combining ALD-grown MoS2 with ideal semiconducting absorbers.

Grain Boundary Healing of Organic-Inorganic Halide Perovskites for Moisture Stability.

Although organic-inorganic halide perovskite (OIHP)-based photovoltaics have high photoconversion efficiency (PCE), their poor humidity stability prevents commercialization. To overcome this critical hurdle, focusing on the grain boundary (GB) of OIHPs, which is the main humidity penetration channel, is crucial. Herein, pressure-induced crystallization of OIHP films prepared with controlled mold geometries is demonstrated as a GB-healing technique to obtain high moisture stability. When exposed to 85% RH at 30 °C, OIHP films fabricated by pressure-induced crystallization have enhanced moisture stability due to the enlarged OIHP grain size and low-angle GBs. The crystallographic and optical properties indicate the effect of applying pressure onto OIHP films in terms of moisture stability. The photovoltaic devices with pressure-induced crystallization exhibited dramatically stabilized performance and sustained over 0.95 normalized PCE after 200 h at 40% RH and 30 °C.

Multiple Heterojunction in Single Titanium Dioxide Nanoparticles for Novel Metal-Free Photocatalysis.

Despite a longstanding controversy surrounding TiO2 materials, TiO2 polymorphs with heterojunctions composed of anatase and rutile outperform individual polymorphs because of the type-II energetic band alignment at the heterojunction interface. Improvement in photocatalysis has also been achieved via black TiO2 with a thin disorder layer surrounding ordered TiO2. However, localization of this disorder layer in a conventional single TiO2 nanoparticle with the heterojunction composed of anatase and rutile has remained a big challenge. Here, we report the selective positioning of a disorder layer of controlled thicknesses between the anatase and rutile phases by a conceptually different synthetic route to access highly efficient novel metal-free photocatalysis for H2 production. The presence of a localized disorder layer within a single TiO2 nanoparticle was confirmed for the first time by high-resolution transmission electron microscopy with electron energy-loss spectroscopy and inline electron holography. Multiple heterojunctions in single TiO2 nanoparticles composed of crystalline anatase/disordered rutile/ordered rutile layers give the nanoparticles superior electron/hole separation efficiency and novel metal-free surface reactivity, which concomitantly yields an H2 production rate that is ∼11-times higher than that of Pt-decorated conventional anatase and rutile single heterojunction TiO2 systems.

Mediator- and co-catalyst-free direct Z-scheme composites of Bi2WO6-Cu3P for solar-water splitting.

Exploring new single, active photocatalysts for solar-water splitting is highly desirable to expedite current research on solar-chemical energy conversion. In particular, Z-scheme-based composites (ZBCs) have attracted extensive attention due to their unique charge transfer pathway, broader redox range, and stronger redox power compared to conventional heterostructures. In the present report, we have for the first time explored Cu3P, a new, single photocatalyst for solar-water splitting applications. Moreover, a novel ZBC system composed of Bi2WO6-Cu3P was designed employing a simple method of ball-milling complexation. The synthesized materials were examined and further investigated through various microscopic, spectroscopic, and surface area characterization methods, which have confirmed the successful hybridization between Bi2WO6 and Cu3P and the formation of a ZBC system that shows the ideal position of energy levels for solar-water splitting. Notably, the ZBC composed of Bi2WO6-Cu3P is a mediator- and co-catalyst-free photocatalyst system. The improved photocatalytic efficiency obtained with this system compared to other ZBC systems assisted by mediators and co-catalysts establishes the critical importance of interfacial solid-solid contact and the well-balanced position of energy levels for solar-water splitting. The promising solar-water splitting under optimum composition conditions highlighted the relationship between effective charge separation and composition.

Ultrahigh Electrocatalytic Conversion of Methane at Room Temperature.

Due to the greenhouse effect, enormous efforts are done for carbon dioxide reduction. By contrast, more attention should be paid for the methane oxidation and conversion, which can help the effective utilization of methane without emission. However, methane conversion and utilization under ambient conditions remains a challenge. Here, this study designs a Co3O4/ZrO2 nanocomposite for the electrochemical oxidation of methane gas using a carbonate electrolyte at room temperature. Co3O4 activated the highly efficient oxidation of methane under mild electric energy with the help of carbonate as an oxidant, which is delivered by ZrO2. Based on the experimental results, acetaldehyde is the key intermediate product. Subsequent nucleophilic addition and free radical addition reactions accounted for the generation of 2-propanol and 1-propanol, respectively. Surprisingly, this work achieves a production efficiency of over 60% in the conversion of methane to produce these long-term stable products. The as-proposed regional electrochemical methane oxidation provides a new pathway for the synthesis of higher alcohols with high production efficiencies under ambient conditions.

Opportunistic diseases among HIV-infected patients: a multicenter-nationwide Korean HIV/AIDS cohort study, 2006 to 2013.

BACKGROUND/AIMS: The frequencies of opportunistic diseases (ODs) vary across countries based on genetic, environmental, and social differences. The Korean HIV/AIDS cohort study was initiated in 2006 to promote research on human immunodeficiency virus (HIV) infection in Korea, and to provide a logistical network to support multicenter projects on epidemiological, clinical, and laboratory aspects of HIV infection. This study evaluated the prevalence of ODs among HIV-infected patients in the era of highly active antiretroviral therapy, and the risk factors associated with ODs. METHODS: The study enrolled 1,086 HIV-infected patients from 19 hospitals. This study examined the baseline data of the HIV/AIDS Korean cohort study at the time of enrollment from December 2006 to July 2013. RESULTS: Candidiasis was the most prevalent opportunistic infection (n = 176, 16.2%), followed by Mycobacterium tuberculosis infection (n = 120, 10.9%), Pneumocystis jirovecii pneumonia (n = 121, 11.0%), cytomegalovirus infection (n = 52, 4.7%), and herpes zoster (n = 44, 4.0%). The prevalence rates of Kaposi's sarcoma (n = 8, 0.7%) and toxoplasmosis (n = 4, 0.4%) were very low compared with other countries. The risk factors for ODs were a low CD4 T cell count at the time of HIV diagnosis (odds ratio [OR], 1.01; p < 0.01), current smoking (OR, 2.27; p = 0.01), current alcohol use (OR, 2.57; p = 0.04), and a history of tuberculosis (OR, 5.23; p < 0.01). CONCLUSIONS: Using recent Korean nationwide data, this study demonstrated that an important predictor of ODs was a low CD4 T cell count at the time of HIV diagnosis. Tuberculosis remains one of the most important ODs in HIV-infected patients in Korea.