Carbon nanofibers/liquid metal composites for high temperature laser ultrasound.

As the demand for clean energy becomes greater worldwide, there will also be an increasing demand for next generation nuclear power plants that incorporate advanced sensors and monitoring equipment. A major challenge posed by nuclear power plants is that, during normal operation, the reactor compartment is subjected to high operating temperatures and radiation flux. Diagnostic sensors monitoring such structures are also subject to temperatures reaching hundreds of degrees Celsius, which puts them at risk for heat degradation. In this work, the ability of carbon nanofibers to work in conjunction with a liquid metal as a photoacoustic transmitter was demonstrated at high temperatures. Fields metal, a Bi-In-Sn eutectic, and gallium are compared as acoustic mediums. Fields metal was shown experimentally to have superior performance over gallium and other reference cases. Under stimulation from a low fluence 6 ns pulse laser at 6 mJ/cm2 with 532 nm green light, the Fields metal transducer transmitted a 200 kHz longitudinal wave with amplitude >5.5 times that generated by a gallium transducer at 300 °C. Each high temperature test was conducted from a hot to cold progression, beginning as high as 300 °C, and then cooling down to 100 °C. Each test shows increasing signal amplitude of the liquid metal transducers as temperature decreases. Carbon nanofibers show a strong improvement over previously used candle-soot nanoparticles in both their ability to produce strong acoustic signals and absorb higher laser fluences up to 12 mJ/cm2.

Flexible Ultrasonic Transducers for Wearable Biomedical Applications: A Review on Advanced Materials, Structural Designs, and Future Prospects.

Due to the rapid developments in materials science and fabrication techniques, wearable devices have recently received increased attention for biomedical applications, particularly in medical ultrasound imaging, sensing, and therapy. Ultrasound is ubiquitous in biomedical applications because of its non-invasive nature, nonionic radiating, high precision, and real-time capabilities. While conventional ultrasound transducers are rigid and bulky, flexible transducers can be conformed to curved body areas for continuous sensing without restricting tissue movement or transducer shifting. This article comprehensively reviews the application of flexible ultrasound transducers in the field of biomedical imaging, sensing, and therapy. First, we review the background of flexible ultrasound transducers. Following that, we discuss advanced materials and fabrication techniques for flexible ultrasound transducers and their enabling technology status. Lastly, we highlight and summarize some promising preliminary data with recent applications of flexible ultrasound transducers in biomedical imaging, sensing, and therapy. We also provide technical barriers, challenges, and future perspectives for further research and development.

Modulation of bioactive calcium phosphate micro/nanoparticle size and shape during in situ synthesis of photo-crosslinkable gelatin methacryloyl based nanocomposite hydrogels for 3D bioprinting and tissue engineering.

BACKGROUND: The gelatin-methacryloyl (GelMA) polymer suffers shape fidelity and structural stability issues during 3D bioprinting for bone tissue engineering while homogeneous mixing of reinforcing nanoparticles is always under debate. METHOD: In this study, amorphous calcium phosphates micro/nanoparticles (CNP) incorporated GelMA is synthesized by developing specific sites for gelatin structure-based nucleation and stabilization in a one-pot processing. The process ensures homogenous distribution of CNPs while different concentrations of gelatin control their growth and morphologies. After micro/nanoparticles synthesis in the gelatin matrix, methacrylation is carried out to prepare homogeneously distributed CNP-reinforced gelatin methacryloyl (CNP GelMA) polymer. After synthesis of CNP and CNP GelMA gel, the properties of photo-crosslinked 3D bioprinting scaffolds were compared with those of the conventionally fabricated ones. RESULTS: The shape (spindle to spherical) and size (1.753 µm to 296 nm) of the micro/nanoparticles in the GelMA matrix are modulated by adjusting the gelatin concentrations during the synthesis. UV cross-linked CNP GelMA (using Irgacure 2955) has significantly improved mechanical (three times compressive strength), 3D printability (160 layers, 2 cm self-standing 3D printed height) and biological properties (cell supportiveness with osteogenic differentiation). The photo-crosslinking becomes faster due to better methacrylation, facilitating continuous 3D bioprinting or printing. CONCLUSION: For 3D bioprinting using GelMA like photo cross-linkable polymers, where structural stability and homogeneous control of nanoparticles are major concerns, CNP GelMA is beneficial for even bone tissue regeneration within short period.

Anti-Obesity and Anti-Adipogenic Effects of Administration of Arginyl-Fructose-Enriched Jeju Barley (Hordeum vulgare L.) Extract in C57BL/6 Mice and in 3T3-L1 Preadipocytes Models.

In our previous study, we reported that arginyl-fructose (AF), one of the Amadori rearrangement compounds (ARCs) produced by the heat processing of Korean ginseng can reduce carbohydrate absorption by inhibiting intestinal carbohydrate hydrolyzing enzymes in both in vitro and in vivo animal models. This reduced absorption of carbohydrate might be helpful to control body weight gain due to excessive carbohydrate consumption and support induced calorie restriction. However, the weight management effect, except for the effect due to anti-hyperglycemic action, along with the potential mechanism of action have not yet been determined. Therefore, the efforts of this study are to investigate and understand the possible weight management effect and mechanism action of AF-enriched barley extracts (BEE). More specifically, the effect of BEE on lipid accumulation and adipogenic gene expression, body weight gain, body weight, plasma lipids, body fat mass, and lipid deposition were evaluated using C57BL/6 mice and 3T3-L1 preadipocytes models. The formation of lipid droplets in the 3T3-L1 treated with BEE (500 and 750 µg/mL) was significantly blocked (p < 0.05 and p < 0.01, respectively). Male C57BL/6 mice were fed a high-fat diet (30% fat) for 8 weeks with BEE (0.3 g/kg-body weight). Compared to the high fat diet control (HFD) group, the cells treated with BEE significantly decreased in intracellular lipid accumulation with concomitant decreases in the expression of key transcription factors, peroxisome proliferator-activated receptor gamma (PPARγ), CCAAT/enhancer-binding protein alpha (CEBP/α), the mRNA expression of downstream lipogenic target genes such as fatty acid binding protein 4 (FABP4), fatty acid synthase (FAS), and sterol regulatory element-binding protein 1c (SREBP-1c). Supplementation of BEE effectively lowered the body weight gain, visceral fat accumulation, and plasma lipid concentrations. Compared to the HFD group, BEE significantly suppressed body weight gain (16.06 ± 2.44 g vs. 9.40 ± 1.39 g, p < 0.01) and increased serum adiponectin levels, significantly, 1.6-folder higher than the control group. These results indicate that AF-enriched barley extracts may prevent diet-induced weight gain and the anti-obesity effect is mediated in part by inhibiting adipogenesis and increasing adiponectin level.

Stress-Sensing Method via Laser-Generated Ultrasound Wave Using Candle Soot Nanoparticle Composite.

This article aims to develop a semi-noncontact stress-sensing system using a laser-generated ultrasound (LGU) wave assisted by candle soot nanoparticle (CSNP) composite. While the acoustoelastic effect is commonly targeted to measure the stress level, efforts to combine it with the LGU wave signal have been lacking due to weak signal intensity. In this study, the CSNP-based transducer is designed to potentiate the photoacoustic energy conversion. To demonstrate the wave propagation with the designed parameters, a numerical simulation was first conducted. The experimental results showed that a laser intensity of 6.5 mJ/cm2 was enough to generate the subsurface longitudinal (SSL) wave from the CSNP composite transducer. The normal beam projection is the most effective wave-generation method, exhibiting the highest signal magnitude compared with inclined projection cases. Finally, the laser-assisted stress-sensing system was assessed by increasing the internal pressure of an air tank. The sensitivity of the developed sensor system was estimated to be 0.296 ns/MPa, showing a correlation of 0.983 with the theoretical prediction. The proposed sensing system can be used to monitor the structural integrity of nuclear power plants.

A Face-Shear Mode Piezoelectric Array Sensor for Elasticity and Force Measurement.

We present the development of a 6 × 6 piezoelectric array sensor for measuring elasticity and force. The proposed sensor employs an impedance measurement technique, sensing the acoustic load impedance of a target by measuring the electrical impedance shift of face-shear mode PMN-PT (lead magnesium niobate-lead titanate) single crystal elements. Among various modes of PMN-PT single crystals, the face-shear mode was selected due to its especially high sensitivity to acoustic loads. To verify the elasticity sensing performance, gelatin samples with different elastic moduli were prepared and tested. For the force measurement test, different magnitudes of force were loaded to the sensing layer whose acoustic impedance was varied with applied forces. From the experimental results, the fabricated sensor showed an elastic stiffness sensitivity of 23.52 Ohm/MPa with a resolution of 4.25 kPa and contact force sensitivity of 19.27 Ohm/N with a resolution of 5.19 mN. In addition, the mapping experiment of elasticity and force using the sensor array was successfully demonstrated.

Stress Measurement of a Pressurized Vessel Using Ultrasonic Subsurface Longitudinal Wave With 1-3 Composite Transducers.

This article aims to develop a stress-sensing method for a pressurized vessel based on subsurface longitudinal (SSL) waves confined in a specific waveform by using 1-3 composite transducers. Although ultrasonic SSL waves have been commonly utilized for stress sensing, wave excitation under the predefined function using the composite-type transmitter is not well studied. In this article, composite-type transducers having a wide frequency bandwidth (> 60%) and a predominant thickness mode are utilized to enhance the signal intensity of the SSL wave and the accuracy of the sensor by incorporating a specific toneburst waveform. Finite element analysis demonstrates that the signal intensity of the composite-type transducer is up to 45.3% higher than that of a single-phase transducer. Pulse-echo tests reveal that the frequency bandwidth of the developed transducer reaches up to 60.7% and is, therefore, sufficient (> 57.0%) to transmit and receive Hanning-windowed toneburst signals. Results of stress sensing affirm a linear relationship between the time delay of SSL wave and the mechanical stress of a pressurized vessel (0.335 ns/MPa). Accordingly, the regression model is constructed via principal component regression (PCR) under temperature-varying condition. PCR has a less significant degree of error (0.62 MPa) compared to that of a typical least square regression (9.49 MPa).

Isolated caecal necrosis-a case study.

A patient with right iliac fossa pain underwent CT angiography which demonstrated isolated caecal necrosis with associated superior mesenteric artery (SMA) stenosis. This was supported by colonoscopic findings and histopathological analysis. Isolated caecal necrosis is a rare presentation of ischaemic colitis.. Clinical and imaging findings of ischaemic colitis may mimic other pathologies. To improve diagnostic accuracy both referrers and radiologists should be aware of risk factors associated with ischaemic colitis. Isolated bowel wall thickening and pneumatosis of a colonic segment on CT are suggestive of focal bowel ischaemia, in the right clinical context.

Biogenic Hematite from Bacteria: Facile Synthesis of Secondary Nanoclusters for Lithium Storage Capacity.

Ferrihydrite, or iron(III) (oxyhydr)oxide (Fe(OH)3), a representative scavenger of environmentally relevant toxic elements, has been repurposed as a low-cost and scalable precursor of well-developed hematite (α-Fe2O3) secondary nanoclusters with a hierarchically structured morphology for lithium-ion anode materials. Here, we report that the bacteria Clostridium sp. C8, isolated from a methane-gas-producing consortium, can synthesize self-assembled secondary hematite nanoclusters (∼150 nm) composed of small nanoparticles (∼15 nm) through the molecular structural rearrangement of amorphous ferrihydrite under mild conditions. The biogenic hematite particles, wrapped with graphene oxide reduced in situ by the reducing bacteria Shewanella sp. HN-41 via one-pot synthesis, deliver an excellent reversible capacity of ∼1000 mA h g-1 after 100 cycles at a current density of 1 A g-1. Furthermore, the heat-treated hematite/rGO exhibits a capacity of 820 mA h g-1 at a high current density of 5 A g-1 and a reversible capacity of up to 1635 mA h g-1 at a current density of 100 mA g-1. This study provides an easy, eco-efficient, and scalable microbiological synthetic route to produce hierarchical hematite/rGO secondary nanoclusters with potential as high-performance Li-ion anode materials.

Biosynthesis of Nanomaterials by Shewanella Species for Application in Lithium Ion Batteries.

Nanomaterials exhibit extraordinary properties based on their size, shape, chemical composition, and crystal structure. Owing to their unique properties nanomaterials are preferred over their bulk counterparts for a number of applications. Although conventional physical and chemical routes were established for the massive production of nanomaterials, there are some drawbacks such as environmental burden and high cost that cannot be disregarded. Recently, there has been great interest toward the green synthesis of inorganic nanomaterials. It has been reported that dissimilatory metal reduction by microorganisms is a cost-effective process to remediate toxic organic and inorganic compounds under anaerobic conditions. Particularly, members of the Shewanella genus have been utilized to produce various biogenic nanomaterials with unique micro/nanostructured morphologies through redox transformations as well as to remove harmful metals and metalloids in eco-efficient and environment-friendly methods under ambient conditions. In the present mini-review, we specifically address the active utilization of microbial respiration processes for the synthesis of novel functional biogenic nanomaterials by the members of the Shewanella genus. This biosynthetic method may provide alternative approaches to produce electrode materials for sustainable energy storage applications.

AlN Ultrasound Sensor for Photoacoustic Lamb Wave Detection in a High-Temperature Environment.

In this paper, we present an ultrasound nondestructive testing (NDT) method for high-temperature (HT) applications using laser-generated Lamb waves and aluminum nitride (AlN) sensors. Lamb waves were introduced to a stainless steel plate by the Nd:YAG pulsed laser at one point and detected by an AlN receiver at a distant position. The fundamental symmetric ( ) and antisymmetric ( ) Lamb waves generated by the pulsed laser were successfully detected by the AlN sensor. This detection was done on a stainless steel plate at temperatures ranging from room temperature to about 800 °C, with a signal-to-noise ratio of higher than 20 dB. Based on the time-of-flights analysis, the ability of this NDT method to localize the defect at an HT (~800 °C) has been demonstrated.

Piezoelectric Floating Element Shear Stress Sensor for the Wind Tunnel Flow Measurement.

A piezoelectric sensor with a floating element was developed for direct measurement of flow induced shear stress. The piezoelectric sensor was designed to detect the pure shear stress while suppressing the effect of normal stress generated from the vortex lift-up by applying opposite poling vectors to the piezoelectric elements. During the calibration stage, the prototyped sensor showed a high sensitivity to shear stress (91.3 ± 2.1 pC/Pa) due to the high piezoelectric coefficients (d 31=-1330 pC/N) of the constituent 0.67Pb(Mg1∕3Nb2∕3)O3-0.33PbTiO3 (PMN-33%PT) single crystal. By contrast, the sensor showed almost no sensitivity to normal stress (less than 1.2 pC/Pa) because of the electromechanical symmetry of the sensing structure. The usable frequency range of the sensor is up to 800 Hz. In subsonic wind tunnel tests, an analytical model was proposed based on cantilever beam theory with an end-tip-mass for verifying the resonance frequency shift in static stress measurements. For dynamic stress measurements, the signal-to-noise ratio (SNR) and ambient vibration-filtered pure shear stress sensitivity were obtained through signal processing. The developed piezoelectric shear stress sensor was found to have an SNR of 15.8 ± 2.2 dB and a sensitivity of 56.5 ± 4.6 pC/Pa in the turbulent flow.

High-Temperature Electromechanical Characterization of AlN Single Crystals.

Hexagonal AlN is a non-ferroelectric material and does not have any phase transition up to its melting point (>2000°C), which indicates the potential use of AlN for high-temperature sensing. In this work, the elastic, dielectric, and piezoelectric constants of AlN single crystals were investigated at elevated temperatures up to 1000°C by the resonance method. We used resonators of five different modes to obtain a complete set of material constants of AlN single crystals. The electrical resistivity of AlN at elevated temperature (1000°C) was found to be greater than 5 × 10(10) Ω · cm. The resonance frequency of the resonators, which was mainly determined by the elastic compliances, decreased linearly with increasing temperature, and was characterized by a relatively low temperature coefficient of frequency, in the range of -20 to -36 ppm/°C. For all the investigated resonator modes, the elastic constants and the electromechanical coupling factors exhibited excellent temperature stability, with small variations over the full temperature range, <11.2% and <17%, respectively. Of particular significance is that due to the pyroelectricity of AlN, both the dielectric and the piezoelectric constants had high thermal resistivity even at extreme high temperature (1000°C). Therefore, high electrical resistivity, temperature independence of electromechanical properties, as well as high thermal resistivity of the elastic, dielectric, and piezoelectric properties, suggest that AlN single crystals are a promising candidate for high-temperature piezoelectric sensing applications.

Crystal structure of Cas1 from Archaeoglobus fulgidus and characterization of its nucleolytic activity.

Clustered Regularly Interspaced Short Palindromic Repeats (CRISPRs) and CRISPR-associated (Cas) proteins are involved in bacterial acquired immunity against incoming hazardous genetic materials. Cas1 is ubiquitous in CRISPR-containing microorganisms and supposed to recognize and cleave a foreign nucleic acid, and integrate the cleaved fragment into host genome using a yet unidentified mechanism. However, all the reported Cas1s did not show the nucleolytic activity, which makes its role still obscure. The elucidated crystal structure of Cas1 from Archaeoglobus fulgidus (AfCas1) shows a butterfly-like dimeric structure. The Asp out of three confirmed nucleolytic residues of Glu, His, and Asp in other Cas1s is replaced with Glu in AfCas1. Further, insertion of five residues into one of two loops, which are close to the catalytic center of and disordered in other Cas1 structures, partially covers the active site of AfCas1. Nonetheless, in vitro assays show that its nucleic acid-binding activity was not impaired against the tested single-stranded (ss) DNA, various forms of double-stranded (ds) DNA, or ssRNA with a hydrolyzing activity against ssRNA and dsDNA in a metal ion-dependent way. These results support the proposed Cas1's function at the early step of this bacterial immune system.