Callus Derived from Petals of the Rosa hybrida Breeding Line 15R-12-2 as New Material Useful for Fragrance Production.

Rose (Rosa hybrida) is a major flower crop worldwide and has long been loved for its variety of colors and scents. Roses are mainly used for gardening or cutting flowers and are also used as raw materials for perfumes, cosmetics, and food. Essential oils, which are extracted from the flowers of plants, including roses, have various scents, and the essential oil market has been growing steadily owing to the growing awareness of the benefits of natural and organic products. Therefore, it is necessary to develop a system that stably supplies raw materials with uniform ingredients in line with the continuous increase in demand. In this study, conditions for the efficient induction of callus were established from the petals of the rose breeding line 15R-12-2, which has a strong scent developed by the National Institute of Horticultural and Herbal Science, Rural Development Administration. The highest callus induction rate (65%) was observed when the petals of the fully open flower (FOF) were placed on the SH11DP medium so that the abaxial surface was in contact with the medium. In addition, the VOCs contained in the petals of 15R-12-2 and the petal-derived callus were analyzed by HS-SPME-GC-MS. Thirty components, including esters and alcohols, were detected in the petal-derived callus. Among them, 2-ethylhexan-1-ol, which showed 59.01% relative content when extracted with hexane as a solvent, was the same component as detected in petals. Therefore, petal-derived callus is expected to be of high industrial value and can be suggested as an alternative pathway to obtaining VOCs.

Micro-computed tomographic evaluation of the effect of fluoride agents on white spot lesions: An in vitro study.

OBJECTIVE: To investigate remineralizing effect of three fluoride regimens on artificially demineralized enamel around orthodontic bracket by analyzing mineral density (MD) acquired from micro-computed tomography (micro-CT). METHODS: Forty-eight bracket bonded bovine incisors were prepared to create demineralized enamel (DE) surface. The samples were divided into four groups according to the fluoride regimen: 1) no fluoridation, 2) 1.23% acidulated phosphate fluoride (APF) gel, 3) fluoridated toothpaste, and 4) 0.05% sodium fluoride mouthwash. Micro-CT was scanned after demineralization (T0), and 2 weeks (T1) and 4 weeks (T2) of fluoridation. RESULTS: APF gel showed highest remineralization of DE during T1-T0 interval among the groups (p < 0.05); followed by toothpaste, mouthwash and no fluoridation. APF gel and toothpaste demonstrated significant increase in MD after 4 weeks of application (p < 0.05). CONCLUSIONS: Remineralization effects of three fluoride regimens were depicted through micro-CT analysis, of which APF gel was most effective.

Transcriptomic Analysis for the Identification of Metabolic Pathway Genes Related to Toluene Response in Ardisia pusilla.

Toluene is an industrial raw material and solvent that can be found abundantly in our daily life products. The amount of toluene vapor is one of the most important measurements for evaluating air quality. The evaluation of toluene scavenging ability of different plants has been reported, but the mechanism of plant response to toluene is only partially understood. In this study, we performed RNA sequencing (RNA-seq) analysis to detect differential gene expression in toluene-treated and untreated leaves of Ardisiapusilla. A total of 88,444 unigenes were identified by RNA-seq analysis, of which 49,623 were successfully annotated and 4101 were differentially expressed. Gene ontology analysis revealed several subcategories of genes related to toluene response, including cell part, cellular process, organelle, and metabolic processes. We mapped the main metabolic pathways of genes related to toluene response and found that the differentially expressed genes were mainly involved in glycolysis/gluconeogenesis, starch and sucrose metabolism, glycerophospholipid metabolism, carotenoid biosynthesis, phenylpropanoid biosynthesis, and flavonoid biosynthesis. In addition, 53 transcription factors belonging to 13 transcription factor families were identified. We verified 10 differentially expressed genes related to metabolic pathways using quantitative real-time PCR and found that the results of RNA-seq were positively correlated with them, indicating that the transcriptome data were reliable. This study provides insights into the metabolic pathways involved in toluene response in plants.

Progress and Challenges in the Improvement of Ornamental Plants by Genome Editing.

Biotechnological approaches have been used to modify the floral color, size, and fragrance of ornamental plants, as well as to increase disease resistance and vase life. Together with the advancement of whole genome sequencing technologies, new plant breeding techniques have rapidly emerged in recent years. Compared to the early versions of gene editing tools, such as meganucleases (MNs), zinc fingers (ZFNs), and transcription activator-like effector nucleases (TALENs), clustered regularly interspaced short palindromic repeat (CRISPR) is capable of altering a genome more efficiently and with higher accuracy. Most recently, new CRISPR systems, including base editors and prime editors, confer reduced off-target activity with improved DNA specificity and an expanded targeting scope. However, there are still controversial issues worldwide for the recognition of genome-edited plants, including whether genome-edited plants are genetically modified organisms and require a safety evaluation process. In the current review, we briefly summarize the current progress in gene editing systems and also introduce successful/representative cases of the CRISPR system application for the improvement of ornamental plants with desirable traits. Furthermore, potential challenges and future prospects in the use of genome-editing tools for ornamental plants are also discussed.

Effects of environmental disinfection on the isolation of vancomycin-resistant Enterococcus after a hospital-associated outbreak of Middle East respiratory syndrome.

Environmental disinfection with sodium hypochlorite and hydrogen peroxide vapor was performed after a hospital-associated outbreak of Middle East respiratory syndrome. Although only 11% of total beds were disinfected, the isolation and vancomycin-resistance rates of Enterococcus spp significantly decreased for 2 months, whereas other multidrug-resistant organisms did not.

Colorimetric evaluation of white spot lesions following external bleaching with fluoridation: An in-vitro study.

OBJECTIVE: This study was performed to investigate the effects of external tooth bleaching with flouridation on the appearance of white spot lesions (WSLs) in vitro. METHODS: In total, 125 bracket-bonded bovine incisor enamel blocks with artificial WSLs were randomly divided into a control group and four treatment groups (home bleaching, home bleaching + fluoridation, in-office bleaching, and in-office bleaching + fluoridation). A spectroradiometer (SR) and digital images (DIs) were used to evaluate colorimetric parameters (Commission Internationale l'Eclairage L*a*b*) for all specimens. Color measurements were obtained before WSL formation (T1), after WSL formation (T2), and after completion of the external tooth bleaching treatment (T3). RESULTS: The SR-based color change after bleaching was significantly greater in the treatment groups than in the control group (p < 0.05). SR-based lightness (L*) and red-green (a*) values were significantly higher at T2 than at T1 (p < 0.001), with no significant changes in yellow-blue (b*) values. At T3, SR-based L* values had increased while a* and b* values had decreased in the treatment groups (p < 0.001). The DI-based color difference between the sound enamel and WSL areas (ΔE*DI) increased significantly from T1 to T2 in all groups (p < 0.001) and significantly decreased from T2 to T3 in the treatment groups (p < 0.001). No significant differences in ΔE*DI at T3 were shown between the four treatment groups (p > 0.05). CONCLUSIONS: The findings of this study suggested that external tooth bleaching with fluoridation can alleviate the conspicuity of WSLs.

Plastid and mitochondrial genomes of Coccophora langsdorfii (Fucales, Phaeophyceae) and the utility of molecular markers.

Coccophora langsdorfii (Turner) Greville (Fucales) is an intertidal brown alga that is endemic to Northeast Asia and increasingly endangered by habitat loss and climate change. We sequenced the complete circular plastid and mitochondrial genomes of C. langsdorfii. The circular plastid genome is 124,450 bp and contains 139 protein-coding, 28 tRNA and 6 rRNA genes. The circular mitochondrial genome is 35,660 bp and contains 38 protein-coding, 25 tRNA and 3 rRNA genes. The structure and gene content of the C. langsdorfii plastid genome is similar to those of other species in the Fucales. The plastid genomes of brown algae in other orders share similar gene content but exhibit large structural recombination. The large in-frame insert in the cox2 gene in the mitochondrial genome of C. langsdorfii is typical of other brown algae. We explored the effect of this insertion on the structure and function of the cox2 protein. We estimated the usefulness of 135 plastid genes and 35 mitochondrial genes for developing molecular markers. This study shows that 29 organellar genes will prove efficient for resolving brown algal phylogeny. In addition, we propose a new molecular marker suitable for the study of intraspecific genetic diversity that should be tested in a large survey of populations of C. langsdorfii.

The relation between idiopathic scoliosis and the frontal and lateral facial form.

OBJECTIVE: The purpose of this study was to evaluate the relation between idiopathic scoliosis and facial deformity in the horizontal, vertical, and anteroposterior planes. METHODS: A total of 123 female patients aged 14 years or older, who visited the Spine Clinic at the Department of Orthopedics, Korea University Guro Hospital for treatment of idiopathic scoliosis, were enrolled. Whole-spine anteroposterior and lateral radiographs were taken with the patient in a naturally erect position, and frontal and lateral cephalograms were taken in an erect position with the Frankfort horizontal line parallel to the floor. Scoliosis was classified according to the Cobb angle and Lenke classification of six curve types. Cephalometric tracing in all cases was carried out with V-Ceph 5.5 by the same orthodontist. The Kruskal-Wallis test was performed to determine whether any relation existed between each group of the idiopathic scoliosis classification and the cephalometric measurements of frontal and lateral cephalograms. RESULTS: The measurements did not reveal any significant association between the Cobb angle and cephalometric measurements and between the curve type based on the Lenke classification and cephalometric measurements. CONCLUSIONS: Based on the results of this study, no apparent relation was observed between the severity of scoliosis and facial form variations in idiopathic scoliosis patients.

The predictability of dentoskeletal factors for soft-tissue chin strain during lip closure.

OBJECTIVE: To investigate the dentoskeletal factors which may predict soft-tissue chin strain during lip closure. METHODS: The pretreatment frontal and lateral facial photographs and lateral cephalograms of 209 women (aged 18-30 years) with Angle's Class I or II malocclusion were examined. The subjects were categorized by three examiners into the no-strain and strain groups according to the soft-tissue chin tension or deformation during lip closure. Relationships of the cephalometric measurements with the group classification were analyzed by logistic regression analysis, and a classification and regression tree (CART) model was used to define the predictive variables for the group classification. RESULTS: The lower the value of the overbite depth indicator (ODI) and the higher the values of upper incisor to Nasion-Pogonion (U1-NPog, mm), overjet, and upper incisor to upper lip (U1-upper lip, mm), the more likely was the subject to be classified into the strain group. The CART showed that U1-NPog was the most prominent predictor of soft-tissue chin strain (cut-off value of 14.2 mm), followed by overjet. CONCLUSIONS: To minimize strain of the soft-tissue chin, orthodontic treatment should be oriented toward increasing the ODI value while decreasing the U1-NPog, overjet, and U1 upper lip values.

The effect of silver ion-releasing elastomers on mutans streptococci in dental plaque.

OBJECTIVE: The purpose of this study was to investigate the antimicrobial effect of silverized elastomers on mutans streptococci in dental plaque. METHODS: Forty patients undergoing orthodontic treatment were randomly placed into 1 of 2 groups. We examined the maxillary right and left central incisors and premolars, and the mandibular right and left canines of all participants. We ligated the right maxillary and left mandibular teeth of the participants in group 1 with silverized elastomers and ligated their contralateral teeth with conventional elastomers. We ligated the left maxillary teeth and right mandibular teeth of group 2 participants with silverized elastomers. Each participant visited the clinic 4 times at 3-week intervals. We applied the elastomers to the teeth on one side of each patient's mouth during their first visit. During the second visit, the elastomers were removed for microbiological analysis and replaced with steel ligatures. During the third visit, we used silverized elastomers to ligate the teeth contralateral to those treated on the first visit. The elastomers were removed during the fourth visit, and microbiological analyses were performed. We compared the quantity of bacteria on silverized and conventional elastomers at the 0.05 level of significance. RESULTS: The percentage of mutans streptococci was not significantly different in cultures of dental plaque from the silverized and the conventional elastomers (p > 0.05). CONCLUSIONS: There was no significant difference between the antimicrobial effect of the silverized elastomers and that of the conventional elastomers.

Influence of orthodontic adhesives and clean-up procedures on the stain susceptibility of enamel after debonding.

OBJECTIVE: To determine the influence of the type of orthodontic adhesive system, such as conventional acid-etching (CE) and self-etching primers (SEPs), on the stain susceptibility of enamel surface after debonding. Effects of clean-up procedures on the enamel surface were also determined. MATERIALS AND METHODS: Two types and four brands of adhesive systems were investigated using 135 human premolars. Unbonded teeth were used as controls. Three-dimensional scanning of the enamel surface was performed before bracket bonding, after debonding, and after clean-up procedures. The color of each tooth was measured before bracket bonding and again after debonding and clean-up procedures. This was followed by methylene blue staining. The stain susceptibility of the enamel surface was measured after finishing only (F-condition) and after finishing/polishing (FP-condition). RESULTS: After debonding, the amount of residual adhesive resins in CE materials was greater than that in SEP materials. For the F-condition, staining color change in SEP materials was significantly higher than that in CE materials. For the FP-condition, staining color change in both CE and SEP materials was not different from those of the control. CONCLUSIONS: The SEP system would show less stain susceptibility if the thin residual adhesive resin layer after debonding is removed by polishing.