Susceptibility of a polycaprolactone-based root canal filling material to degradation. II. Gravimetric evaluation of enzymatic hydrolysis.

Polycaprolactone is susceptible to enzymatic biodegradation via ester bond cleavage. This study examined the susceptibility of Resilon, a polycaprolactone-based root filling material to enzymatic hydrolysis. Resilon, gutta-percha, and polycaprolactone disks, prepared by compression molding, were incubated in phosphate-buffered saline, lipase PS or cholesterol esterase at 37 degrees C for 96 h. They were retrieved at different time intervals for gravimetric analysis and scanning electron microscopy. The materials exhibited slight weight gains when incubated in phosphate-buffered saline that can be attributed to water sorption. Gutta-percha showed similar weight gains in the two enzymes. Conversely, Resilon and polycaprolactone exhibited extensive surface thinning and weight losses after incubation in lipase PS and cholesterol esterase. Glass filler particles in Resilon were exposed following surface dissolution of the polymer matrix, creating rough surface topography. Biodegradation of Resilon by bacterial and salivary enzymes warrants further investigation of their activities using cultures of endodontically relevant microbes and human saliva extracts.

Susceptibility of a polycaprolactone-based root canal filling material to degradation. I. Alkaline hydrolysis.

Polycaprolactone, a thermoplastic aliphatic polyester, is reportedly susceptible to both alkaline and enzymatic hydrolyzes. This screening study examined the susceptibility of Resilon, a polycaprolactone-based root filling composite, to alkaline hydrolysis. There were 15-mm diameter disks of Resilon and Obtura gutta-percha prepared by compressive molding and immersed in 20% sodium ethoxide for 20 or 60 min. Control disks were immersed in ethanol for 60 min. These disks were examined using field-emission scanning electron microscopy and energy dispersive X-ray analysis. For Resilon, the surface resinous component was hydrolyzed after 20 min of sodium ethoxide immersion, exposing the spherulitic polymer structure and subsurface glass and bismuth oxychloride fillers. More severe erosion occurred after 60 min of sodium ethoxide treatment. Gutta-percha was unaffected after immersion in sodium ethoxide. As Resilon is susceptible to alkaline hydrolysis, it is possible that enzymatic hydrolysis may occur. Biodegradation of Resilon by bacterial/salivary enzymes and endodontically relevant bacteria warrants further investigation.

Ultrastructural evaluation of the apical seal in roots filled with a polycaprolactone-based root canal filling material.

This in vitro study compared the ultrastructural quality of the apical seal achieved with Resilon/Epiphany and gutta-percha/AH Plus. Single-rooted extracted human teeth were prepared using a crown-down technique, debrided with NaOCl and EDTA, and obturated with either Resilon/Epiphany or gutta-percha/AH Plus. They were examined for gaps along canal walls using SEM, and for apical leakage using a transmission electron microscopy (TEM). SEM revealed both gap-free regions, and gap-containing regions in canals filled with both materials. TEM revealed the presence of silver deposits along the sealer-hybrid layer interface in Resilon/Epiphany, and between the sealer and gutta-percha in the controls. It is concluded that a complete hermetic apical seal cannot be achieved with either root filling materials.

Identification of resected root-end dentinal cracks: a comparative study of transillumination and dyes.

The dilemma of diagnosing and possibly treating dentinal cracks continues to present a challenge in endodontics. The purpose of this in vitro study was to compare the effectiveness of transillumination and dyes in identifying root-end dentinal cracks. Fifty maxillary central incisors were decoronated, and the canals were instrumented to an ISO size 50 at the working length. The apical 3 mm of the roots was resected, and cracks were artificially created in the apical dentin. Four independent examiners evaluated the root ends at x8 magnification with a surgical operating microscope using transillumination (group 1), sodium fluorescein dye (group 2), caries detect dye (group 3), methylene blue dye (group 4), and methylene blue plus transillumination (group 5). The examiners' ability to identify root ends correctly with and without cracks was analyzed by comparing the data with the predetermined standard (cracked and noncracked) using logistic regression analysis. All techniques used were shown to be more effective than random chance at diagnosing cracks. The areas under the curve of the different techniques were as follows: transillumination, 0.81 (95% confidence interval [CI], 0.69-0.93); sodium fluorescein, 0.72 (95% CI, 0.58-0.86); caries detector, 0.76 (95% CI, 0.63-0.89); methylene blue, 0.70 (95% CI, 0.55-0.84); and methylene blue plus transillumination, 0.82 (95% CI, 0.70-0.94). Thus, the crack assessment techniques that gave the best discrimination between cracked and noncracked specimens, regardless of rater, was methylene blue plus transillumination. This study emphasizes the usefulness of transillumination along with magnification in detecting dentinal cracks.

Use of self-etching adhesives to seal resected apices.

The purpose of this study was to evaluate the sealing ability of four self-etching adhesives placed over blood-contaminated/uncontaminated resected root apices without root-end preparation. Extracted maxillary incisors and canines were randomly divided into four groups of 10 teeth each. After canal preparation and resection of the apex, four self-etching adhesives (Clearfil SE Bond, One-Up Bond F, Unifil Bond, and ABF) were applied over the control and contaminated surfaces. The roots were then subjected to 15 cm of water pressure to simulate periapical microleakage stress. Data were analyzed using a two-way repeated measures, ANOVA. Positive and negative controls responded as expected. Statistical analysis indicated that there were no significant differences in the sealing effectiveness among the adhesives applied to contaminated or uncontaminated groups. All contaminated groups had significantly higher leakage (p < 0.003) than their uncontaminated pairs.

Identification of resected root-end dentinal cracks: a comparative study of visual magnification.

The purpose of this in vitro study was to evaluate and compare the effectiveness of visual enhancements as aids in identifying artificially created dentinal cracks in resected root ends. Fifty human maxillary central incisors were decoronated, and the root canals were instrumented to ISO size 50 at the working length. The apical 3 mm of the roots were resected, and cracks were artificially created in the apical dentin with an average load of 5.6 kg using a cylindrical wedge in a miniature drill press. A video microscope at x65 magnification was used to observe the cracks as they developed. Four independent examiners evaluated the root specimens using unaided/corrected vision (group 1), loupes at x3.3 magnification (group 2), a surgical operating microscope at x10 magnification (group 3), and the Orascope at x35 magnification (group 4). The examiners' proficiency at correctly identifying root ends with and without cracks was evaluated. The data were compared to the predetermined standard (27 cracked, 23 not cracked) with a one-tailed Fisher's exact test (alpha = 0.05). Statistically, the Orascope (p = 0.02) was significantly superior, whereas using unaided/corrected vision (p = 0.99), loupes (p = 0.88), or the microscope (p = 0.14) was not significantly better than guessing. The accuracy of correct identification for unaided/ corrected vision, loupes, the microscope, and the Orascope was 39%, 45%, 53%, and 58%, respectively. A two-way analysis of variance of the accuracy of crack identification showed a significant difference among the four visualization techniques (p = 0.0007) and also among the four evaluators (p = 0.006).

Effect of root resection on the apical sealing ability of mineral trioxide aggregate.

OBJECTIVE: The purpose of this in vitro study was to determine the minimum depth of mineral trioxide aggregate (MTA; ProRoot; DENTSPLY/Tulsa Dental, Tulsa, Okla) required to maintain an apical seal following root resection. Study design. In 10 instrumented teeth, MTA was used to obturate the apical 6 mm of the root canal and was allowed to set for 48 hours. Leakage was determined by means of a fluid filtration method at a pressure of 20 cm H(2)O. Leakage was measured before root resection, and after 3, 4, 5, and 6 mm apical resections. Data were analyzed by means of a Kruskal-Wallis one-way analysis of variance with P <.05. RESULTS: Fluid leakage was shown to increase after each resection, but did not reach statistical significance (P <.05) until 4 mm of the apex had been removed. CONCLUSION: The results indicate that root resection did not significantly affect the sealing ability of MTA when at least 3 mm of the MTA remained. Although there was a statistically significant difference in leakage following the 4 mm resection, it is unknown what the biological difference would be between the 3 mm and 4 mm resections.

Secondary hyperparathyroidism: a case report.

A thorough diagnostic examination is essential before providing endodontic treatment. The sequence of diagnostic procedures must begin with a well-organized review of the medical history. In the early screening process, a health history that reveals a systemic disorder must be investigated further because it may have a significant impact on the dental diagnosis and ultimate endodontic treatment. There are a number of systemic diseases that can cause bone lesions throughout the body. Chronic renal failure is one disorder that may stimulate a secondary hyperparathyroidism that can cause a variety of bone lesions. In some instances these lesions appear in the periapical region of teeth and can lead to a misdiagnosis of a lesion of endodontic origin. The following case report of a patient referred for endodontic treatment demonstrates the importance of understanding the effects of end-stage renal disease on the dental structures.

Intracoronal sealing ability of two dental cements.

The purpose of this study was to compare the efficacy of sealing the coronal 2-mm of the root canals versus covering the entire pulpal floor with one of two dental-resin cements (Principle or C&B Metabond). Sixty-two molars with the occlusal half of the crowns and the apical half of the roots removed were used. Each canal was enlarged by using a #3 Gates Glidden bur and obturated with unsealed gutta-percha cones. The teeth were randomly assigned to four groups, each containing 15 teeth, plus a negative and a positive control. In group 1, 2 mm of Principle were placed over the entire pulpal floor. In group 2, Principle was placed 2 mm into each canal orifice. Groups 3 and 4 were the same as groups 1 and 2, except C&B Metabond cement was used. After the cement set, the gutta-percha was removed and the integrity of the seal was tested by fluid filtration at a pressure of 20 cm H2O at 1 h and at 1, 2, and 4 weeks. The data were analyzed by a three-way ANOVA and the Student-Newman-Keuls tests at alpha = 0.05. The controls behaved as expected. Results showed that there were no statistically significant differences among the materials used or the location (p > 0.05), but there was a significant difference with respect to time. Principle leaked significantly more than C&B Metabond at 1 h (p < 0.05), but the seal became tighter over time. C&B Metabond leaked less early (p < 0.05) but increased in leakage at 4 weeks. Both materials sealed well over the 4-week study. Principle was easier to use, and sealing the entire pulpal floor was easier than sealing only the canal orifice.

Sealing ability of mineral trioxide aggregate and super-EBA when used as furcation repair materials: a longitudinal study.

Immediate sealing of furcation perforations enhances the repair process. The purpose of this study was to longitudinally compare the ability of mineral trioxide aggregate (MTA) and Super-EBA to seal furcation perforations. Fifty-one extracted human maxillary molars were decoronated 3 mm above the CEJ, and the roots were amputated 3 mm below the furcation. A #2 high-speed round bur was used to perforate the center of the furcations. The canals were obturated with gutta-percha, and the root ends were sealed with C&B Metabond. Three experimental groups of 15 teeth each were restored with MTA, Super-EBA, or a combination of MTA in the perforation and a Super-EBA dome on the pulpal floor. Six teeth served as controls. Each tooth was affixed to a fluid filtration device and subjected to a pressure of 20 cm H2O. The integrity of the perforation seal was evaluated initially at 30 min for the Super-EBA and the combination groups and at 4 h for the MTA group. Additional measurements were then made at 24 h, 1 week, and 1 month. The controls behaved as expected. A two-way ANOVA revealed a significant difference (p = 0.01) between materials. Tukey's test isolated the difference to Super EBA as producing a superior seal but only at 24 h. There was no significant effect with time (p = 0.57) or the interaction of the materials with time (p = 0.66). All materials sealed the perforations very well. The maximum leakage of all materials was <0.007 microL min(-1) cm H2O(-1).