RESUMO
Objectives: Rituximab is used for remission induction and the prevention of relapse in anti-neutrophil cytoplasmic antibody-associated vasculitis (AAV). This study evaluated the incidence of safety events and compared time to first serious adverse event (SAE) between a rituximab cohort and a cohort treated with non-rituximab therapies in a real-life setting. Methods: Rituximab surveillance study in vasculitis was a retrospective observational study of patients with AAV who received rituximab (MabThera) or other treatments between 2003 and 2017 at a specialist vasculitis clinic. The primary endpoint was time to first SAE. Results: 392 patients were enrolled: 247 in the rituximab and 145 in the control cohorts with a total follow up of 2217 person-years (mean study duration 5.7 years). Mean age was 61 years, 77% had granulomatosis with polyangiitis (GPA). There were differences in baseline characteristics (disease duration and prior immunosuppressive use) between groups. 134/247 patients (54%) in the rituximab and 58/145 (40%) of controls experienced at least one SAE. Time to first SAE was shorter in the rituximab group (hazard ratio (HR) 1.55, 95% CI 1.07-2.26, P = 0.022). Predictors of first SAE were higher vasculitis damage index and the presence of chronic pulmonary or kidney disease. The risk of serious infection was higher in the rituximab group (relative risk (RR) 2.12, 95% CI 1.31-3.43). Conclusion: Over 40% of patients with AAV experienced at least one SAE. Although shorter time to first SAE and higher risk of infection were observed in the rituximab group, baseline imbalances necessitate a careful interpretation of these results.
RESUMO
Hydraulic fracturing, or fracking, requires large amounts of water to extract fossil fuel from rock formations. As a result of hydraulic fracturing, the briny wastewater, often termed back-produced fracturing or fracking water (FW), is pumped into holding ponds. One of the biggest challenges with produced water management is controlling microbial activity that could reduce the pond water's reusable layer and pose a significant environmental hazard. This study focuses on the characterization of back-produced water that has been hydraulically fractured using chemical and biological analysis and the development of a high-throughput screening method to evaluate and predict the antimicrobial effect of four naturally and commercially available acidic inhibitors (edetic acid, boric acid, tannic acid, and lactic acid) on the growth of the FW microbiome. Liquid cultures and biofilms of two laboratory model strains, the vegetative Escherichia coli MG1655, and the spore-forming Bacillus atrophaeus (also known as Bacillus globigii, BG) bacteria, were used as reference microorganisms. Planktonic bacteria in FW were more sensitive to antimicrobials than sessile bacteria in biofilms. Spore-forming BG bacteria exhibited more sensitivity to acidic inhibitors than the vegetative E. coli cells. Organic acids were the most effective bacterial growth inhibitors in liquid culture and biofilm.
RESUMO
While antibiotic resistance poses a threat from both Gram-positive bacteria (GPB) and Gram-negative bacteria (GNB), GNB pose a more imminent public health hazard globally. GNB are a threat to growing antibiotic resistance because of the complex makeup of the membrane. The AcrAB-TolC efflux pump is a known resistance mechanism of Escherichia coli (E. coli) cells. This study utilized molecular dynamics modeling to visualize some of the changes occurring at a molecular level when airborne bacteria are exposed to stress and antibiotics. This study was conducted to build upon previous experimental research showing that there is an increase in antibiotic resistance and efflux pump activity when exposed to aerosolization. AcrB and AcrAB-TolC proteins were simulated under standard and increased pressure to compare the effect of aerosolization on the binding to the three different antibiotics (puromycin (PUY), ampicillin (AMP) and sulfamethoxazole-trimethoprim (SXT)) to the AcrB binding site. Analysis such as root-mean-square deviation of atomic positions and root-mean-square fluctuation, the opening of TolC, and the significant molecular mechanics with generalized Born and surface area solvation (MM-GBSA) scores associated with specific ligands were recorded. Resistance in experimental data indicated a relationship between the docking scores and some ligand-protein interactions. Results showed that there was more flexibility in the proteins within simulations conducted under standard pressure for the AcrB protein and the full tripartite complex AcrAB-TolC, showing that increased pressure causes more rigidity. MM-GBSA scores, used to calculate the free energy of ligand-protein binding, did not show a significant change, but interestingly, the strongest MM-GBSA scores were for ligands that moved to another binding pocket and did not result in resistance or opening of the efflux pump. However, the ligand moved from the binding site and did not cause the opening of TolC to increase significantly, whereas PUY and AMP were bound to the binding site for the duration of all simulations. AMP ligands under increased pressure showed the largest change in opening of the TolC efflux pump and aligns with experimental data showing E. coli cells had the most resistance to AMP after aerosolization. These results, in addition to other real-time changes such as OM proteins and mutations of targets within the cell, could be used to delineate and mitigate antibiotic resistance mechanisms.
Assuntos
Proteínas de Escherichia coli , Escherichia coli , Escherichia coli/genética , Antibacterianos/farmacologia , Antibacterianos/metabolismo , Proteínas de Escherichia coli/metabolismo , Proteínas de Membrana Transportadoras/metabolismo , Simulação de Dinâmica Molecular , Ligantes , Proteínas da Membrana Bacteriana Externa/metabolismo , Proteínas Associadas à Resistência a Múltiplos Medicamentos/metabolismo , Proteínas de Transporte/metabolismoRESUMO
The COVID-19 pandemic, caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), sparked an international debate on effective ways to prevent and treat the virus. Specifically, there were many varying opinions on the use of ivermectin (IVM) throughout the world, with minimal research to support either side. IVM is an FDA-approved antiparasitic drug that was discovered in the 1970s and was found to show antiviral activity. The objective of this study is to examine the binding behavior and rates of association and dissociation between SARS-CoV-2 receptor binding domain (RBD), IVM, and their combination using aminopropylsilane (APS) biosensors as surrogates for the hydrophobic interaction between the viral protein and human angiotensin-converting enzyme 2 (ACE2) receptors to determine the potential of IVM as a repurposed drug for SARS-CoV-2 prevention and treatment. The IVM, RBD, and combination binding kinetics were analyzed using biolayer interferometry (BLI) and validated with multiple in silico techniques including protein-ligand docking, molecular dynamics simulation, molecular mechanics-generalized Born surface area (MM-GBSA), and principal component analysis (PCA). Our results suggest that with increasing IVM concentrations the association rate with the hydrophobic biosensor increases with a simultaneous decrease in dissociation. Significant kinetic changes to RBD, when combined with IVM, were found only at a concentration a thousand times the approved dosage with minimal changes found over a 35-min time period. Our study suggests that IVM is not an effective preventative or treatment method at the currently approved dosage.
Assuntos
COVID-19 , SARS-CoV-2 , Humanos , Ivermectina/farmacologia , Pandemias , Simulação de Dinâmica Molecular , Ligação Proteica , Simulação de Acoplamento MolecularRESUMO
We assessed the efficacy of oversampling techniques to enhance machine learning model performance in predicting Escherichia coli MG1655 presence in spinach wash water. Three oversampling methods were applied to balance two datasets, forming the basis for training random forest (RF), support vector machines (SVMs), and binomial logistic regression (BLR) models. Data underwent method-specific centering and standardization, with outliers replaced by feature-specific means in training datasets. Testing occurred without these preprocessing steps. Model hyperparameters were optimized using a subset of testing data via 10-fold cross-validation. Models were trained on full datasets and tested on newly acquired spinach wash water samples. Synthetic Minority Oversampling Technique (SMOTE) and Adaptive Synthetic Sampling approach (ADASYN) achieved strong results, with SMOTE RF reaching an accuracy of 90.0%, sensitivity of 93.8%, specificity of 87.5%, and an area under the curve (AUC) of 98.2% (without data preprocessing) and ADASYN achieving 86.55% accuracy, 87.5% sensitivity, 83.3% specificity, and a 92.4% AUC. SMOTE and ADASYN significantly improved (p < 0.05) SVM and RF models, compared to their non-oversampled counterparts without preprocessing. Data preprocessing had a mixed impact, improving (p < 0.05) the accuracy and specificity of the BLR model but decreasing the accuracy and specificity (p < 0.05) of the SVM and RF models. The most influential physiochemical feature for E. coli detection in wash water was water conductivity, ranging from 7.9 to 196.2 µS. Following closely was water turbidity, ranging from 2.97 to 72.35 NTU within this study.
Assuntos
Escherichia coli , Spinacia oleracea , Aprendizado de Máquina , Máquina de Vetores de SuporteRESUMO
Understanding how bacteria respond to ventilated environments is a crucial concept, especially when considering accurate airflow modeling and detection limits. To properly design facilities for aseptic conditions, we must minimize the parameters for pathogenic bacteria to thrive. Identifying how pathogenic bacteria continue to survive, particularly due to their multi-drug resistance characteristics, is necessary for designing sterile environments and minimizing pathogen exposure. A conserved characteristic among bacterial organisms is their ability to maintain intracellular homeostasis for survival and growth in hostile environments. Mechanosensitive (MS) channels are one of the characteristics that guide this phenomenon. Interestingly, during extreme stress, bacteria will forgo favorable homeostasis to execute fast-acting survival strategies. Physiological sensors, such as MS channels, that trigger this survival mechanism are not clearly understood, leaving a gap in how bacteria translate physical stress to an intracellular response. In this paper, we study the role of mechanosensitive ion channels that are potentially triggered by aerosolization. We hypothesize that change in antimicrobial uptake is affected by aerosolization stress. Bacteria regulate their defense mechanisms against antimicrobials, which leads to varying susceptibility. Based on this information we hypothesize that aerosolization stress affects the antimicrobial resistance defense mechanisms of Escherichia coli (E. coli). We analyzed the culturability of knockout E. coli strains with different numbers of mechanosensitive channels and compared antibiotic susceptibility under stressed and unstressed airflow conditions. As a result of this study, we can identify how the defensive mechanisms of resistant bacteria are triggered for their survival in built environments. By changing ventilation airflow velocity and observing the change in antibiotic responses, we show how pathogenic bacteria respond to ventilated environments via mechanosensitive ion channels.
RESUMO
Two poultry Confined Animal Feeding Units (CAFUs), "House A" and "House B", were selected from the TAMU poultry facility for the study, and samples were collected over a five-day period. Bioaerosol sampling was conducted using a Wetted Wall Cyclone (WWC) bioaerosol collector at the two CAFU houses, in which House A housed approximately 720 broiler chickens and roosters, while House B remained unoccupied and served as a reference. Both houses consisted of 24 pens arranged on either side of a central walkway. Bacterial content analysis was conducted using microbial plating, real-time Polymerase Chain Reaction (PCR), and Fatty Acid Methyl Ester (FAME) analysis, while ambient temperature and relative humidity were also monitored. The concentrations of microorganisms in House A showed a highly dynamic range, ranging from 4000 to 60,000 colony forming units (CFU) per cubic meter of air. Second, the WWC samples contained approximately ten-fold more bacterial DNA than the filter samples, suggesting higher levels of viable cells captured by the WWC. Third, significant concentrations of pathogens, including Salmonella, Staphylococcus, and Campylobacter, were detected in the poultry facility. Lastly, the WWC system demonstrated effective functionality and continuous operation, even in the challenging sampling environment of the CAFU. The goal of this study was to characterize the resident population of microorganisms (pathogenic and non-pathogenic) present in the CAFUs and to evaluate the WWC's performance in such an environment characterized by elevated temperature, high dust content, and feathers. This knowledge could then be used to improve understanding microorganism dynamics in CAFUs including the spread of bacterial infections between animals and from animals to humans that work in these facilities, as well as of the WWC performance in this type of environment (elevated temperature, high content of dust and feathers). A more comprehensive understanding can aid in improving the management of bacterial infections in these settings.
RESUMO
Spreading patterns of the coronavirus disease (COVID-19) showed that infected and asymptotic carriers both played critical role in escalating transmission of virus leading to global pandemic. Indoor environments of restaurants, classrooms, hospitals, offices, large assemblies, and industrial installations are susceptible to virus outbreak. Industrial facilities such as fabrication rooms of meat processing plants, which are laden with moisture and fat in indoor air are the most sensitive spaces. Fabrication room workers standing next to each other are exposed to the risk of long-range viral droplets transmission within the facility. An asymptomatic carrier may transmit the virus unintentionally to fellow workers through sporadic sneezing leading to community spread. A novel Computational Fluid Dynamics (CFD) model of a fabrication room with typical interior (stationary objects) was prepared and investigated. Study was conducted to identify indoor airflow patterns, droplets spreading patterns, leading droplets removal mechanism, locations causing maximum spread of droplets, and infection index for workers along with stationary objects in reference to seven sneeze locations covering the entire room. The role of condensers, exhaust fans and leakage of indoor air through large and small openings to other rooms was investigated. This comprehensive study presents flow scenarios in the facility and helps identify locations that are potentially at lower or higher risk for exposure to COVID-19. The results presented in this study are suitable for future engineering analyses aimed at redesigning public spaces and common areas to minimize the spread of aerosols and droplets that may contain pathogens.
Assuntos
Poluição do Ar em Ambientes Fechados , COVID-19 , Humanos , COVID-19/epidemiologia , Espirro , Aerossóis e Gotículas Respiratórios , CarneRESUMO
A low cutpoint wetted wall bioaerosol sampling cyclone (LCP-WWC), with an aerosol sampling flow rate of 300 L/min at 55â³ H2O pressure drop and a continuous liquid outflow rate of about 0.2 mL/min, was developed by upgrading an existing system. The laboratory strain Escherichia coli MG1655 was aerosolized using a six-jet Collison Nebulizer and collected at high velocity using the LCP-WWC for 10 min with different collection liquids. Each sample was quantitated during a 15-day archiving period after aerosolization for culturable counts (CFUs) and gene copy numbers (GCNs) using microbial plating and whole-cell quantitative polymerase chain (qPCR) reaction. The samples were analyzed for protein composition and antimicrobial resistance using protein gel electrophoresis and disc diffusion susceptibility testing. Aerosolization and collection were followed by an initial period of quiescence or dormancy. After 2 days of archiving at 4 °C and RT, the bacteria exhibited increased culturability and antibiotic resistance (ABR), especially to cell wall inhibitors (ampicillin and cephalothin). The number of resistant bacteria on Day 2 increased nearly four-times compared to the number of cells at the initial time of collection. The mechanical stress of aerosolization and high-velocity sampling likely stunned the cells triggering a response of dormancy, though with continued synthesis of vital proteins for survival. This study shows that an increase in intensity in environmental conditions surrounding airborne bacteria affects their ability to grow and their potential to develop antimicrobial resistance.
RESUMO
Wastewater-based surveillance (WBS) on SARS-CoV-2 has been proved to be an effective approach to estimate the prevalence of COVID-19 in communities and cities. However, its application was overlooked at smaller scale, such as a single facility. Meat processing plants are hotspots for COVID-19 outbreaks due to their unique environment that are favorable for the survival and persistence of SARS-CoV-2. This is the first known WBS study in meat processing plants. The goal was to understand the temporal variation of the SARS-CoV-2 levels in wastewater from a meat processing plant in Canada during a three-month campaign and to find any correlation with clinically confirmed cases in the surrounding city area. Higher SARS-CoV-2 concentrations and detection frequencies were observed in the solid fraction compared to the liquid fraction of the wastewater. The viruses can be preserved in the solid fraction of wastewater for up to 12 days. The wastewater virus level did not correlate to the city-wide COVID-19 cases due to the unmatching scales. WBS on SARS-CoV-2 in meat processing plants can be useful for identifying COVID-19 outbreaks in the facility and serve as an effective alternative when resources for routine individual testing are not available.
RESUMO
COVID-19 can cause serious illness requiring multimodal treatment and is associated with secondary infections. Studies have suggested an increased risk of fungal infections, including candidemia following severe COVID-19 though understanding of risk factors and clinical outcomes remains unclear. OBJECTIVES: To describe clinical characteristics, outcomes and risk factors of candidemia among patients hospitalized with severe COVID-19. DESIGN SETTING AND PARTICIPANTS: A multicenter, case-control study of patients with severe COVID-19 was conducted to evaluate risk factors and clinical outcomes in patients who developed candidemia between August 2020 and August 2021. MAIN OUTCOMES AND MEASURES: Chart review evaluating institutional and patient demographics, clinical and mycological characteristics, concomitant interventions (antibiotics, immunosuppressive agents, parenteral nutrition, degree of oxygen support, mechanical ventilation, surgery), treatment regimens, and outcomes (length of stay and discharge disposition). RESULTS: A total of 275 patients were enrolled in the study, including 91 patients with severe COVID-19 and subsequent candidemia and 184 with severe COVID-19 without candidemia. Most patients received antibiotics prior to candidemia episode (93%), while approximately one-quarter of patients received biologic for COVID-19. In-hospital mortality was significantly higher in the cases compared with the controls (68% vs 40%; p < 0.01). Candida albicans was the most common (53%), followed by C. glabrata (19%). Use of central lines, biologic, and paralytics were independent risk factors for candidemia. CONCLUSIONS AND RELEVANCE: Candidemia following COVID-19 infection is a concern that requires clinical consideration and patient monitoring. Risk factors for the development of candidemia in the setting of COVID-19 infection are largely consistent with traditional risk factors for candidemia in hospitalized patients.
RESUMO
More than 320 million people worldwide were affected by SARS-CoV-2 or COVID-19, which already caused more than 5.5 million deaths. COVID-19 spreads through air when an infected person breathes, coughs, or sneezes out droplets containing virus. Emerging variants like Omicron with positivity rate of 16 (highest among others) present a greater risk of virus spread, so all types of indoor environments become critically important. Strategically adopted Heating Ventilation and Air Conditioning (HVAC) approach can significantly reduce the virus spread by early removal of contaminated aerosolized droplets. We modeled different HVAC configurations to characterize the diffusion of contaminated droplets cloud through Computational Fluid Dynamics (CFD) simulations of sneeze in standard hospital room as indoor scenario. Injection of saliva droplets with characteristics of exhaled air from lungs was applied to mimic real sneeze. CFD simulations have been performed for three HVAC configurations at two Air Change per Hour (ACH) rates; 6 and 15 ACH. For the first time, use of air curtain at low flow rate has been examined. Simulations provide high fidelity spatial and temporal droplets cloud diffusion under different HVAC configurations, showing spread in room indoor environment up to 360 s. Over 92% of ejected sneeze mass is removed from room air within seconds while the remaining 8% or less becomes airborne with droplets (<50 µm size) and tends to spread uniformly with regular HVAC configuration. Low-speed air curtain accelerates decontamination by efficiently removing aerosolized 1-50 µm size droplets. Study investigates role of droplets removal mechanisms such as escape, evaporation, and deposition on surfaces. Interestingly, results show presence of contaminated droplets even after 5 min of sneeze, which can be effectively removed using low-speed air curtain. Study finds that high ventilation rate requirements can be optimized to modify earlier and new hospital designs to reduce the spread of airborne disease.
Assuntos
Poluição do Ar em Ambientes Fechados , COVID-19 , Poluição do Ar em Ambientes Fechados/prevenção & controle , Descontaminação , Humanos , SARS-CoV-2 , EspirroRESUMO
To understand how SARS-CoV-2 spreads indoors, in this study bovine coronavirus was aerosolized as simulant into a plexiglass chamber with coupons of metal, wood and plastic surfaces. After aerosolization, chamber and coupon surfaces were swiped to quantify the virus concentrations using quantitative polymerase chain reaction (qPCR). Bio-layer interferometry showed stronger virus association on plastic and metal surfaces, however, higher dissociation from wood in 80% relative humidity. Virus aerosols were collected with the 100 L/min wetted wall cyclone and the 50 L/min MD8 air sampler and quantitated by qPCR. To monitor the effect of the ventilation on the virus movement, PRD1 bacteriophages as virus simulants were disseminated in a ¾ scale air-conditioned hospital test room with twelve PM2.5 samplers at 15 L/min. Higher virus concentrations were detected above the patient's head and near the foot of the bed with the air inlet on the ceiling above, exhaust bottom left on the wall. Based on room layout, air measurements and bioaerosol collections computational flow models were created to visualize the movement of the virus in the room airflow. The addition of air curtain at the door minimized virus concentration while having the inlet and exhaust on the ceiling decreased overall aerosol concentration. Controlled laboratory experiments were conducted in a plexiglass chamber to gain more insight into the fundamental behavior of aerosolized SARS-CoV-2 and understand its fate and transport in the ambient environment of the hospital room.
Assuntos
COVID-19 , Aerossóis/análise , Animais , Bovinos , Clima , Hospitais , Humanos , SARS-CoV-2/genéticaRESUMO
A novel coronavirus, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) was identified as the cause of the COVID-19 pandemic that originated in China in December 2019. Although extensive research has been performed on SARS-CoV-2, the binding behavior of spike (S) protein and receptor binding domain (RBD) of SARS-CoV-2 at different environmental conditions have yet to be studied. The objective of this study is to investigate the effect of temperature, fatty acids, ions, and protein concentration on the binding behavior and rates of association and dissociation between the S protein and RBD of SARS-CoV-2 and the hydrophobic aminopropylsilane (APS) biosensors using biolayer interferometry (BLI) validated with molecular dynamics simulation. Our results suggest three conditions-high ionic concentration, presence of hydrophobic fatty acids, and low temperature-favor the attachment of S protein and RBD to hydrophobic surfaces. Increasing the temperature within an hour from 0 to 25 °C results in S protein detachment, suggesting that freezing can cause structural changes in the S protein, affecting its binding kinetics at higher temperature. At all the conditions, RBD exhibits lower dissociation capabilities than the full-length S trimer protein, indicating that the separated RBD formed stronger attachment to hydrophobic surfaces compared to when it was included in the S protein.
Assuntos
COVID-19/virologia , Glicoproteína da Espícula de Coronavírus , Sítios de Ligação , Técnicas Biossensoriais/métodos , Cinética , Ligação Proteica , Domínios Proteicos , Glicoproteína da Espícula de Coronavírus/química , Glicoproteína da Espícula de Coronavírus/metabolismoRESUMO
The objectives of this study are (1) to identify beneficiary-level characteristics associated with skilled nursing facility (SNF) length of stay (LOS), and (2) to determine if significant differences in LOS exist for vulnerable populations at the individual level or among nursing homes that serve a disproportionate share of vulnerable populations. This study employed 2014-2015 Medicare Long-Term Care Minimum Data Set (MDS v3.0) assessment, fee-for-service claims and enrollment, and 2014 Nursing Home Compare data to examine SNF LOS in Medicare beneficiaries. We used a hierarchical linear model to identify which beneficiary-level characteristics are associated with SNF LOS, while controlling for facility-level characteristics. After controlling for beneficiary-and facility-level characteristics, we found dual eligibility, racial or ethnic minority, depression, and Alzheimer's disease to be associated with longer Medicare covered SNF stays. We found that facilities that served higher proportions of dually eligible individuals tended to have higher average LOS compared to other facilities.
Assuntos
Etnicidade , Instituições de Cuidados Especializados de Enfermagem , Idoso , Humanos , Tempo de Internação , Medicare , Grupos Minoritários , Alta do Paciente , Estados UnidosRESUMO
Reactive oxygen species play a major role in the induction of programmed cell death and numerous diseases. Production of reactive oxygen species is ubiquitous in biological systems such as humans, bacteria, fungi/yeasts, and plants. Although reactive oxygen species are known to cause diseases, little is known about the importance of the combined oxidative stress burden in the gut. Understanding the dynamics and the level of oxidative stress 'reactivity' across kingdoms could help ascertain the combined consequences of free radical accumulation in the gut lumen. Here, we present fundamental similarities of oxidative stress derived from the host immune cells, bacteria, yeasts, plants, and the therein-derived diets, which often accentuate the burden of free radicals by accumulation during storage and cooking conditions. Given the described similarities, oxidative stress could be better understood and minimized by monitoring the levels of oxidative stress in the feces to identify pro-inflammatory factors. However, we illustrate that dietary studies rarely monitor oxidative stress markers in the feces, and therefore our knowledge on fecal oxidative stress monitoring is limited. A more holistic approach to understanding oxidative stress 'reactivity' in the gut could help improve strategies to use diet and microbiota to prevent intestinal diseases.
Assuntos
Microbiota , Estresse Oxidativo , Radicais Livres , Humanos , Oxirredução , Espécies Reativas de OxigênioRESUMO
The Zika virus (ZIKV), a significant zoonotic flavivirus, was neglected as a human pathogen until the recent epidemic. The rapid geographic spread of the virus and association with neurological disorders has created a global public health concern pressing the need for anti-ZIKV drugs. Previous ZIKV drug discovery research has focused on three primary targets, RNA-dependent RNA polymerase, envelope protein, and viral proteases, and none has yet resulted in a commercially viable inhibitor. In the quest for finding effective inhibitors, it is important to expand the number of targets available for drug discovery research. To this end, the ZIKV precursor membrane protein (prM) comes to the forefront as a potential target due to its critical role in virus infectivity and pathogenicity. prM acts as a chaperone for envelope protein folding and prevents premature fusion of virions to the host membrane and has not been attempted as a drug target before. One critical requirement for a protein to be an effective target is the ability of the protein to be druggable, i.e. having active sites that can bind to specific ligands. In this work, the druggability of prM was assessed via molecular docking combined molecular dynamics simulations followed binding affinity kinetics studies. Compounds that had a high affinity to the prM protein were screened in silico and ligand-binding free energies were computed using molecular mechanics with generalized Born and surface area continuum solvation (MM-GBSA) method. In vitro binding kinetics via biolayer interferometry (BLI) and interaction analysis confirmed that prM could be targeted for drug discovery to combat ZIKV infection.Communicated by Ramaswamy H. Sarma.
Assuntos
Infecção por Zika virus , Zika virus , Humanos , Proteínas de Membrana/metabolismo , Simulação de Acoplamento Molecular , RNA Polimerase Dependente de RNARESUMO
ABSTRACT: The aim of this study was to compare the effectiveness of a quantitative real-time PCR (qPCR) molecular method and the Crystal Diagnostic Xpress (CDx) immunoassay for detecting Salmonella and Shiga toxin-producing Escherichia coli (STEC) in air samples collected from abattoirs in Texas. The 70 air samples were collected from two small and two large meat processing plants in the spring and summer with a wetted wall cyclone air sampler. The samples were divided equally into two parts: one part was used for the qPCR assay, and the other part was enriched for 18 and 36 h and evaluated with the CDx immunoassay. All samples for which positive results were obtained were confirmed by plating and by biochemical and serological tests as recommended by AOAC International to verify results of rapid methods. With the qPCR and CDx assays and 36 h of enrichment, 37.5 and 57.1% of the samples, respectively, were positive for Salmonella (P < 0.05) and 65.0 and 60.7%, respectively, were positive for STEC (P > 0.05). Air samples required longer enrichment for the CDx immunoassay than recommended by the manufacturer for food samples. Recovery of Salmonella and STEC increased 16 and 47%, respectively, when enrichment was extended from 18 to 36 h. The prevalence of Salmonella and STEC obtained with both methods was affected by the size of the processing plant and the processing stage. Detection rates for samples from larger plants were higher for both pathogens. Significantly higher prevalence was obtained for samples from the stunning and dehiding areas than for those from the fabrication rooms and chillers. Salmonella detection was higher with the CDx assay than with the qPCR assay, but no differences were found for the detection of STEC by the qPCR and CDx assays. These results highlight the importance of method adjustments when testing matrices other than foods. More research is needed to understand the dynamics of pathogen dispersal in aerosols and how this affects the effectiveness of current rapid detection methods.
Assuntos
Escherichia coli Shiga Toxigênica , Animais , Bovinos , Microbiologia de Alimentos , Imunoensaio , Reação em Cadeia da Polimerase em Tempo Real , Salmonella/genética , Escherichia coli Shiga Toxigênica/genética , TexasRESUMO
An improved method for fluctuation-enhanced sensing (FES) is introduced. We enhanced the old binary fingerprinting method, where the fingerprint bit values were ±1, by introducing ternary fingerprint bits utilizing a reference odor. In the ternary method, the fingerprint bit values are -1, 0, and +1, where the 0 value stands for the situation where the slope of the spectrum is identical to that of the reference odor. The application of the reference odor spectrum makes the fingerprint relative to the reference. The ternary nature and the reference feature increase the information entropy of the fingerprints. The method is briefly illustrated by sensing bacterial odor in cow manure isolates.
Assuntos
Odorantes/análise , Bactérias , Monitoramento Ambiental , Esterco/microbiologia , Estrutura MolecularRESUMO
This paper presents a conceptual wind vector detector for measuring the velocity and direction of wind in enclosed or semi-enclosed large spaces. Firstly, a thermal wind sensor with constant power control was manufactured and then used as a wind velocity sensing unit. Secondly, a sensor bracket equipped with three thermal wind sensors was designed, the fluid dynamic response regularity of the measured wind field to the sensor bracket was analyzed using ANSYS Fluent CFD software, and then its structural parameters were optimized to improve measurement accuracy. The sensor bracket was fabricated via 3D printing. Finally, a unique wind vector measurement method was developed for the wind vector detector. Experimental results showed that the measured velocity range of the thermal wind sensor satisfied the requirements of being within 0-15 m/s with an accuracy of ±0.3 m/s, and the wind direction angle range of the wind vector detector was within 0-360° with an accuracy of ±5°. By changing the applied power control value of the thermal wind sensor and structural parameters of the sensor bracket, the measurement range and accuracy of the wind vector detector can be adjusted to suit different applications.