Some aspects of formation and tribological properties of silver nanodumbbells.

In this paper, metal nanodumbbells (NDs) formed by laser-induced melting of Ag nanowires (NWs) on an oxidized silicon substrate and their tribological properties are investigated. The mechanism of ND formation is proposed and illustrated with finite element method simulations. Tribological measurements consist in controllable real-time manipulation of NDs inside a scanning electron microscope (SEM) with simultaneous force registration. The geometry of NDs enables to distinguish between different types of motion, i.e. rolling, sliding and rotation. Real contact areas are calculated from the traces left after the displacement of NDs and compared to the contact areas predicted by the contact mechanics and frozen droplet models. PACS: 81.07.-b; 62.25.-g; 62.23.Hj.

Manipulation of nanoparticles of different shapes inside a scanning electron microscope.

In this work polyhedron-like gold and sphere-like silver nanoparticles (NPs) were manipulated on an oxidized Si substrate to study the dependence of the static friction and the contact area on the particle geometry. Measurements were performed inside a scanning electron microscope (SEM) that was equipped with a high-precision XYZ-nanomanipulator. To register the occurring forces a quartz tuning fork (QTF) with a glued sharp probe was used. Contact areas and static friction forces were calculated by using different models and compared with the experimentally measured force. The effect of NP morphology on the nanoscale friction is discussed.

Fibroblast growth on micro- and nanopatterned surfaces prepared by a novel sol-gel phase separation method.

Physical characteristics of the growth substrate including nano- and microstructure play crucial role in determining the behaviour of the cells in a given biological context. To test the effect of varying the supporting surface structure on cell growth we applied a novel sol-gel phase separation-based method to prepare micro- and nanopatterned surfaces with round surface structure features. Variation in the size of structural elements was achieved by solvent variation and adjustment of sol concentration. Growth characteristics and morphology of primary human dermal fibroblasts were found to be significantly modulated by the microstructure of the substrate. The increase in the size of the structural elements, lead to increased inhibition of cell growth, altered morphology (increased cytoplasmic volume), enlarged cell shape, decrease in the number of filopodia) and enhancement of cell senescence. These effects are likely mediated by the decreased contact between the cell membrane and the growth substrate. However, in the case of large surface structural elements other factors like changes in the 3D topology of the cell's cytoplasm might also play a role.

Simultaneous measurement of static and kinetic friction of ZnO nanowires in situ with a scanning electron microscope.

A novel method for in situ measurement of the static and kinetic friction is developed and demonstrated for zinc oxide nanowires (NWs) on oxidised silicon wafers. The experiments are performed inside a scanning electron microscope (SEM) equipped with a nanomanipulator with an atomic force microscope tip as a probe. NWs are pushed by the tip from one end until complete displacement is achieved, while NW bending is monitored by the SEM. The elastic bending profile of a NW during the manipulation process is used to calculate the static and kinetic friction forces.

Formation of thick dielectrophoretic carbon nanotube fibers.

The aim of this work was to study the formation process of dielectrophoretic (DEP) carbon nanotube fibers (CNT-fibers) and characterize the fiber properties relevant to their technological applications. The fiber diameter was shown to increase when applied voltage was increased (up to 350 V(pp)) and when retraction speed was decreased (down from 400 µm s(-1)) in accordance with theoretical expectations. This paper represents the first demonstration of the formation of thick DEP CNT-fibers (up to ∼ ∅0.4 mm). This is an intriguing result, as it expands the diversity of possible applications of the fibers and facilitates their characterization by analytical methods that require large quantities of the material. The performance of these thick fibers was as follows: a density of ∼ 0.35 g cm(-3), a tensile strength of ∼ 15 MPa, a Young's modulus of ∼ 1 GPa, and an electrical resistivity of ∼ 70 mΩ cm.

Electrically conductive and optically transparent Sb-doped SnO2 STM-probe for local excitation of electroluminescence.

We demonstrate that an optically transparent and electrically conductive antimon-doped tin-oxide tip that is prepared in a sol-gel process can be used as a probe for scanning tunnelling microscopy (STM), yielding atomic vertical and nanometre lateral resolution. Emission of visible light from the tunnelling junction between gold particles and the tip is observed for bias voltages above 7 V. In contrast to the metallic tips generally used in STM, this tip does not significantly perturb the local optical response. Therefore, the tunnelling induced light can be used to map the optical near-field of surface structures with the tunnel gap acting as highly localised light source for the investigation of near-field enhancement in complex metal structures.