Patient Selection in Randomized Controlled Trials of Total Knee Arthroplasty: A Systematic Review Assessing Inclusion Criteria.

BACKGROUND: Patients undergo total knee arthroplasty (TKA) at widely disparate stages of osteoarthritis, raising the possibility of high heterogeneity among patients enrolled in TKA research studies. Obscuration of treatment effectiveness and other problems that may stem from cohort heterogeneity can be controlled in clinical studies by rigorously defining target patients. The purpose of this review was to determine the extent to which randomized controlled trials (RCTs) on TKA use osteoarthritis severity, as defined by radiographic grade or patient-reported outcome measures (PROMs), in their inclusion criteria, and to investigate potential impact on outcome. METHODS: A search of PubMed, Embase, Scopus, Web of Science, and Cochrane databases used a combination of terms involving TKA, PROMs, and radiographic scoring. A total of 1,227 studies were independently reviewed by 2 screeners for the above terms. RCTs with ≥100 patients (236) and with <100 patients (325) undergoing TKA were analyzed with regard to the specific inclusion criteria and recruitment process. RESULTS: Among the identified RCTs with ≥100 patients, 18 (<8%, with a total of 2,952 randomized patients) used specific radiographic scoring or PROM thresholds in their inclusion criteria. Eleven of the 18 studies used specific radiographic scoring, such as the Kellgren-Lawrence or Ahlbäck classifications. Three studies used preoperative PROM thresholds: Knee Society Knee Score of <60, Knee Society Function Score of <60, Oxford Knee Score of <20, and Hospital for Special Surgery Score of <60. Among studies with <100 patients, 48 (<15%) used specific inclusion criteria. CONCLUSIONS: The vast majority of RCTs (>85%) did not enroll patients based on disease severity, as measured by PROM score thresholds or radiographic classifications, in their inclusion criteria. The lack of consistent inclusion criteria likely results in heterogeneous cohorts, potentially undermining the validity of RCTs on TKA. LEVEL OF EVIDENCE: Prognostic Level I . See Instructions for Authors for a complete description of levels of evidence.

Defining a successful total knee arthroplasty: a systematic review of metrics of clinically important changes.

BACKGROUND: Despite the increasing use of patient-reported outcome measures (PROMs), the methodology used to evaluate clinically significant postoperative outcomes after total knee arthroplasty (TKA) is variable. The review aimed to survey studies with identified PROM-based metrics of clinical efficacy and the assessment procedures after TKA. METHODS: The MEDLINE database was queried from 2008-2020. Inclusion criteria were: full texts, English language, primary TKA with minimum one-year follow-up, use of metrics for assessing clinical outcomes with PROMs, and primary derivations of metrics. The following PROM-based metrics were identified: minimal clinically important difference (MCID), minimum detectable change (MDC), patient acceptable symptom state (PASS), and substantial clinical benefit (SCB). Study design, PROM value data, and methods of derivation for metrics were recorded. RESULTS: We identified 18 studies (including 46,173 patients) that met the inclusion criteria. Across these studies, 10 different PROMs were employed, and MCID was derived in 15 studies (83%). The MCID was calculated using anchor-based techniques in nine studies (50%) and distribution techniques in eight studies (44%). PASS values were presented in two studies (11%) and SCB in one study (6%) using an anchor-based method; MDC was derived in four studies (22%) using the distribution method. CONCLUSION: There is variability in the TKA literature with respect to the definition and derivation of measurements of clinically significant outcomes. Standardization of these values may have implications for optimal case selection and PROM-based quality measurement, ultimately improving patient satisfaction and outcomes.

Hemostatic Agents in Orthopedic Surgery.

Controlling blood loss is a crucial aspect of orthopedic surgery. Hemostatic agents can be used intraoperatively in combination with antifibrinolytics as part of an overall strategy to limit blood loss. Several new hemostatic agents have recently come to the market designed specifically for vascular surgery but have found uses in other surgical fields, including orthopedics. This article reviews the mechanisms of action and best uses of various mechanical hemostats, active hemostats, flowable hemostats, and fibrin sealants for achieving hemostasis in orthopedic surgery. Mechanical and active hemostats have been reported to successfully decrease blood loss from cancellous bone, capillaries, and venules. Flowable hemostats are generally favorable for use in small spaces where the swelling capabilities of mechanical and active hemostats can be detrimental to surrounding structures. Sealants are best used for closing defects in tissues.

The Effect of Buttress Plating on Biomechanical Stability of Coronal Shear Fractures of the Capitellum: A Cadaveric Study.

PURPOSE: The purpose of this study was to compare, using a cadaveric model, the biomechanical properties of headless compression screws (HCSs) and HCSs augmented with a buttress plate (BP) in capitellar fractures. METHODS: Twenty pairs of fresh-frozen humeri (mean age, 46.3 years; range, 33-58 years) were used. The soft tissue was removed, and a Dubberley type IA capitellar fracture was created. One specimen in each pair was randomly assigned to receive either two 2.5-mm HCSs (HCS group) or two 2.5-mm HCSs augmented with an anterior 2.4-mm BP (HCS + BP group). This resulted in a similar distribution of the left and right humeri between the groups. Cyclic loading was performed, and displacement of the capitellum at 50, 100, 250, 500, 1,000, and 2,000 cycles was assessed using a motion capture system. This was followed by load-to-failure testing, wherein the load at a displacement of 1 and 2 mm was recorded. Failure was defined as 2-mm displacement. RESULTS: During cyclic loading, there were no significant differences in the displacement between the HCS and HCS + BP groups at any of the assessed cycles. During load-to-failure testing, no significant strength differences were observed in the load at 1-mm displacement between the HCS (mean: 449.8 N, 95% CI: 283.6-616.0) and HCS + BP groups (mean: 606.2 N, 95% CI: 476.4-736.0). However, a significantly smaller load resulted in a 2-mm displacement of the fragment in the HCS group (mean: 668.8 N, 95% CI: 414.3-923.2) compared with the HCS + BP group (mean: 977.5 N, 95% CI: 794.1-1,161.0). CONCLUSIONS: Anterior, low-profile buttress plating in addition to HCSs results in a significantly higher load to failure compared with HCSs alone in a biomechanical Dubberley type IA capitellar fracture model. CLINICAL RELEVANCE: The addition of an anterior BP may be considered to improve initial stability in select cases such as osteoporotic patients or when the posterolateral column is frail.

Metrics of Clinically Important Changes in Total Hip Arthroplasty: A Systematic Review.

BACKGROUND: Although patient-reported outcome measures (PROMs) have become a regularly used metric, there is little consensus on the methodology used to determine clinically relevant postoperative outcomes. We systematically reviewed the literature for studies that have identified metrics of clinical efficacy after total hip arthroplasty (THA) including minimal clinically important difference (MCID), patient acceptable symptom state (PASS), minimal detectable change (MDC), and substantial clinical benefit (SCB). METHODS: A systematic review examining quantitative metrics for assessing clinical improvement with PROMs following THA was conducted according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines using the MEDLINE database from 2008 to 2020. Inclusion criteria included full texts, English language, primary THA with minimum 1-year follow-up, use of metrics for assessing clinical outcomes with PROMs, and primary derivations of those metrics. Sixteen studies (24,487 THA patients) met inclusion criteria and 11 different PROMs were reported. RESULTS: MCIDs were calculated using distribution methods in 7 studies (44%), anchor methods in 2 studies (13%), and both methods in 2 studies (13%). MDC was calculated in 2 studies, PASS was reported in 1 study using anchor-based method, and SCB was calculated in 1 study using anchor-based method. CONCLUSION: There is a lack of consistency in the literature regarding the use and interpretation of PROMs to assess patient satisfaction. MCID was the most frequently reported measure, while MDC, SCB, and PASS were used relatively infrequently. Method of derivation varied based on the PROM used; distribution method was more frequently used for MCID.

Chromatin condensation regulates endothelial cell adaptation to shear stress.

Vascular endothelial cells (ECs) have been shown to be mechanoresponsive to the forces of blood flow, including fluid shear stress (FSS), the frictional force of blood on the vessel wall. Recent reports have shown that FSS induces epigenetic changes in chromatin. Epigenetic changes, such as methylation and acetylation of histones, not only affect gene expression but also affect chromatin condensation, which can alter nuclear stiffness. Thus, we hypothesized that changes in chromatin condensation may be an important component for how ECs adapt to FSS. Using both in vitro and in vivo models of EC adaptation to FSS, we observed an increase in histone acetylation and a decrease in histone methylation in ECs adapted to flow as compared with static. Using small molecule drugs, as well as vascular endothelial growth factor, to change chromatin condensation, we show that decreasing chromatin condensation enables cells to more quickly align to FSS, whereas increasing chromatin condensation inhibited alignment. Additionally, we show data that changes in chromatin condensation can also prevent or increase DNA damage, as measured by phosphorylation of γH2AX. Taken together, these results indicate that chromatin condensation, and potentially by extension nuclear stiffness, is an important aspect of EC adaptation to FSS.

Neurovascular Anatomic Locations and Surgical Safe Zones When Approaching the Posterior Glenoid and Scapula: A Quantitative and Qualitative Cadaveric Anatomy Study.

Purpose: To characterize the qualitative anatomy of posterior scapula structures encountered with the Judet approach and to perform a quantitative evaluation of these structures' anatomic locations, including their relationships to osseus landmarks to identify safe zones. Methods: Twelve fresh-frozen cadaveric shoulders (mean age, 55.2 years; range 41-64 years; 5 left, 7 right) were dissected. A coordinate measuring machine was used to collect the coordinates of anatomic landmarks, structures at risk during surgical approach to the posterior scapula, and the footprints of muscle attachments on the posterior scapula. These coordinates were analyzed for their relationships with clinically relevant anatomy. Results: The suprascapular nerve was a mean of 20.3 mm (18.9-21.7 mm) medial to the glenoid 9-o'clock position. The posterior circumflex artery and vein were a mean of 100.0 mm (92.2-107.7 mm) lateral to along the lateral border of the scapula from the inferior angle of the scapula and a mean of 41 mm (34.2-47.9 mm) medial along the lateral scapular border from the 6-o'clock position on the glenoid rim. The long head of the triceps covers a mean of 132 mm2, and it was found to be contiguous with the glenoid capsule at the 6-o'clock position. Conclusions: A safe zone exists 19 mm medially from the glenoid 9-o'clock position to the suprascapular nerve and a minimum of 34.2 mm medially along the lateral scapular border from the glenoid 6 o'clock to the posterior circumflex scapular artery. Clinical Relevance: The modified Judet approach is a minimally invasive surgery that reduces surgical trauma but necessitates precise knowledge of scapular neurovascular anatomy. Surgeons should be aware of these intervals to help avoid these structures when working near the posterior shoulder. This study may allow us to define neurovascular safe zones when this approach is used.

Anterior Inferior Tibiofibular Ligament Suture Tape Augmentation for Isolated Syndesmotic Injuries.

BACKGROUND: The best operative construct and technique for treatment of isolated syndesmotic injuries is highly debated. The purpose of this study was to determine whether the addition of anterior inferior tibiofibular ligament (AITFL) suture repair or suture tape (ST) augmentation provides any biomechanical advantage to the operative repair of an isolated syndesmotic injury. METHODS: Twelve lower leg specimens underwent biomechanical testing in 6 states: (1) intact, (2) AITFL suture repair, (3) AITFL suture repair + transsyndesmotic suture button (SB), (4) AITFL suture repair + ST augmentation + SB, (5) AITFL suture repair + ST augmentation, and (6) complete syndesmotic injury. The ankle joint was subjected to 6 cycles of 5 Nm internal and external rotation torque under a constant axial load. The spatial relationship between the tibia, fibula, and talus was continuously recorded with a 5-camera motion capture system. RESULTS: AITFL suture repair and AITFL suture repair + ST augmentation showed no statistically significant change in fibula kinematics compared to the intact state. Compared to native, AITFL suture repair + SB showed increased fibular external rotation (+2.32 degrees, P < .001), and decreased tibiofibular gap (overtightening) (-0.72 mm, P = .007). AITFL suture repair + ST augmentation + SB also showed increased fibular external rotation (+1.46 degrees, P = .013). Sagittal plane motion of the fibula was not significantly different between any states. None of the repairs restored intact state talus rotation; however, the repairs that used ST augmentation reduced the talus external rotation laxity compared to the complete syndesmotic injury. CONCLUSION: AITFL suture repair and AITFL ST augmentation best restored the rotational kinematics and stability of the fibula and ankle joint in an isolated syndesmotic injury model. CLINICAL RELEVANCE: AITFL suture repair with or without ST augmentation may be a good operative addition or alternative to SB fixation for isolated syndesmotic disruptions.

Pullout Strength of All-Suture and Metallic Anchors in Repair of Lateral Collateral Ligament Injuries of the Elbow.

PURPOSE: To compare the biomechanical properties of metallic anchor (MA) and all-suture anchor (ASA) constructs in the anatomic reattachment of the lateral ulnar collateral ligament complex to its humeral insertion. METHODS: Twenty paired male human cadaveric elbows with a mean age of 46.3 years (range: 33-58 years) were used in this study. Each pair was randomly allocated across 2 groups of either MA or ASA. A single 3.5-mm MA or 2.6-mm ASA was then inserted flush into the lateral epicondyle. A dynamic tensile testing machine was used to perform cyclic loading followed by a load to failure test. During the cyclic loading phase, the anchors were sinusoidally tensioned from 10 N to 100 N for 1,000 cycles at a frequency of 0.5 Hz. In the load to failure test, the anchors were pulled at a rate of 3 mm/s. Load at 1-mm and 2-mm displacement, as well as load to ultimate failure were assessed. Clinical failure was defined as displacement of more than 2 mm. Normality of data was assessed with the Shapiro-Wilk test. Continuous data are presented as medians and compared with the Mann-Whitney U test and categorical data was compared with the χ2 test or Fisher exact test. RESULTS: Displacement was significantly greater for the ASA group during cyclic loading starting from the tenth cycle (P < .05). Displacement of more than 5 mm within the first 100 cycles was observed in 2 anchors in the ASA group. No difference was observed in loads required to displace 1 mm (MA: 146 N [6-169] vs ASA: 144 N [2-153]; P = .53) and 2 mm (MA: 171 N [13-202] vs ASA: 161 N [9-191]; P = .97), but there was a statistically significant difference between ultimate loads in favor of ASA in the load to failure test (MA: 297 N [84-343] vs 463 N [176-620]; P < .01). CONCLUSIONS: In the cyclic test, no difference in clinical failure defined as pull-out of more than 2 mm was observed between 3.5 mm MAs and 2.6 mm ASAs. In the ultimate load to failure analysis, no difference was observed between groups in force causing 1 and 2 mm of displacement, but there was a significant difference in favor of ASA in the pull to ultimate failure test. CLINICAL RELEVANCE: Potential benefits of all-suture anchors include preservation of bone stock, reduced radiographic artifacts, and easier revisions. Although their use has been investigated thoroughly in the shoulder, there remains a paucity of literature regarding displacement and pull-out strength in the elbow.

Accessibility and Thickness of Medial and Lateral Talar Body Cartilage for Treatment of Ankle and Foot Osteochondral Lesions.

BACKGROUND: The purposes of this study were to determine (1) if cartilage thicknesses on the talar dome and medial/lateral surfaces of the talus were similar, (2) whether there was sufficient donor cartilage surface area on the medial and lateral talar surfaces to repair talar dome cartilage injuries of the talus, and (3) whether the cartilage surface could be increased following anterior talofibular ligament (ATFL) and sectioning of the tibionavicular and tibiospring portion of the anterior deltoid. METHODS: Medial and lateral approaches were utilized in 8 cadaveric ankles to identify the accessible medial, lateral, and talar dome cartilage surfaces in 3 conditions: (1) intact, (2) ATFL release, and (3) superficial anterior deltoid ligament release. The talus was explanted, and the cartilage areas were digitized with a coordinate measuring machine. Cartilage thickness was quantified using a laser scanner. RESULTS: The mean cartilage thickness was 1.0 ± 0.1 mm in all areas tested. In intact ankles, the medial side of the talus showed a larger total area of available cartilage than the lateral side (152 mm2 vs 133 mm2). ATFL release increased the available cartilage area on the medial and lateral sides to 167 mm2 and 194 mm2, respectively. However, only the lateral talar surface had sufficient circular graft donor cartilage available for autologous osteochondral transplantation (AOT) procedures of the talus. After ATFL and deltoid sectioning, there was an increase in available graft donor cartilage available for AOT procedures. CONCLUSION: The thickness of the medial and lateral talar cartilage surfaces is very similar to that of the talar dome cartilage surface, which provides evidence that the medial and lateral surfaces may serve as acceptable AOT donor cartilage. The surface area available for AOT donor site grafting was sufficient in the intact state; however, sectioning the ATFL and superficial anterior deltoid ligament increased the overall lateral talar surface area available for circular grafting for an AOT procedure that requires a larger graft. These results support the idea that lateral surfaces of the talus may be used as donor cartilage for an AOT procedure since donor and recipient sites are similar in cartilage thickness, and there is sufficient cartilage surface area available for common lesion sizes in the foot and ankle. CLINICAL RELEVANCE: This anatomical study investigates the feasibility of talar osteochondral autografts from the medial or lateral talar surfaces exposed with standard approaches. It confirms the similar cartilage thickness of the talar dome and the ability to access up to an 8- to 10-mm donor graft from the lateral side of the talus after ligament release. This knowledge may allow better operative planning for use of these surfaces for osteochondral lesions within the foot and ankle, particularly in certain circumstances of a revision microfracture.

Quantitative and Qualitative Surgical Anatomy of the Acromioclavicular Joint Capsule and Ligament: A Cadaveric Study.

BACKGROUND: The acromioclavicular (AC) capsule and ligament have been found to play a major role in maintaining horizontal stability. To reconstruct the AC capsule and ligament, precise knowledge of their anatomy is essential. PURPOSE/HYPOTHESIS: The purposes of this study were (1) to determine the angle of the posterosuperior ligament in regard to the axis of the clavicle, (2) to determine the width of the attachment (footprint) of the AC capsule and ligament on the acromion and clavicle, (3) to determine the distance to the AC capsule from the cartilage border of the acromion and clavicle, and (4) to develop a clockface model of the insertion of the posterosuperior ligament on the acromion and clavicle. It was hypothesized that consistent angles, attachment areas, distances, and insertion sites would be identified. STUDY DESIGN: Descriptive laboratory study. METHODS: A total of 12 fresh-frozen shoulders were used (mean age, 55 years [range, 41-64 years]). All soft tissue was removed, leaving only the AC capsule and ligament intact. After a qualitative inspection, a quantitative assessment was performed. The AC joint was fixed in an anatomic position, and the attachment angle of the posterosuperior ligament was measured using a digital protractor. The capsule and ligament were removed, and a coordinate measuring device was utilized to assess the width of the AC capsule footprint and the distance from the footprint to the cartilage border of the acromion and clavicle. The AC joint was then disarticulated, and the previously marked posterosuperior ligament insertion was transferred into a clockface model. The mean values across the 12 specimens were demonstrated with 95% CIs. RESULTS: The mean attachment angle of the posterosuperior ligament was 51.4° (95% CI, 45.2°-57.6°) in relation to the long axis of the entire clavicle and 41.5° (95% CI, 33.8°-49.1°) in relation to the long axis of the distal third of the clavicle. The mean clavicular footprint width of the AC capsule was 6.4 mm (95% CI, 5.8-6.9 mm) at the superior clavicle and 4.4 mm (95% CI, 3.9-4.8 mm) at the inferior clavicle. The mean acromial footprint width of the AC capsule was 4.6 mm (95% CI, 4.2-4.9 mm) at the superior side and 4.0 mm (95% CI, 3.6-4.4 mm) at the inferior side. The mean distance from the lateral clavicular attachment of the AC capsule to the clavicular cartilage border was 4.3 mm (95% CI, 4.0-4.6 mm), and the mean distance from the medial acromial attachment of the AC capsule to the acromial cartilage border was 3.1 mm (95% CI, 2.9-3.4 mm). On the clockface model of the right shoulder, the clavicular attachment of the posterosuperior ligament ranged from the 9:05 (range, 8:00-9:30) to 11:20 (range, 10:00-12:30) position, and the acromial attachment ranged from the 12:20 (range, 11:00-1:30) to 2:10 (range, 13:30-14:40) position. CONCLUSION: The finding that the posterosuperior ligament did not course perpendicular to the AC joint but rather was oriented obliquely to the long axis of the clavicle, in combination with the newly developed clockface model, may help surgeons to optimally reconstruct this ligament. CLINICAL RELEVANCE: Our results of a narrow inferior footprint and a short distance from the inferior AC capsule to cartilage suggest that proposed reconstruction of the AC joint capsule should focus primarily on its superior portion.

Does dual plating clavicle fractures increase the risk of refracture after hardware removal? A biomechanical investigation.

BACKGROUND: Dual orthogonal plating of midshaft clavicle fractures is increasingly used for osteosynthesis. The risk of refracture after hardware removal remains unknown. The purpose of this study was to compare the torsional and 3-point bending loads to failure of the clavicle following removal of single-plane, superior 3.5-mm plate fixation vs. dual orthogonal plating 2.7-mm constructs. METHODS: This study used 12 pairs of clavicles (N = 24) harvested from cadaveric specimens with a mean age at death of 56.5 years (range, 46-65 years). One clavicle from each pair was randomly assigned to either superior plating (SP, n = 12) or double plating (DP, n = 12). For SP, a superior 3.5-mm plate was used as a template to drill 3 bicortical 2.8-mm holes medial and lateral to the center of the clavicle. For DP, two 2.7-mm plates were used as a template to drill 4 bicortical 2.0-mm holes medial and lateral to the center of the clavicle. Clavicle pairs were randomly and evenly distributed to undergo either 3-point bending (n = 12) or posterior torsional loading (n = 12). Cyclic loading was performed, followed by load-to-failure testing. Stiffness, displacement at failure, load to failure, and failure mode were assessed and compared between SP and DP constructs. RESULTS: No significant differences between the SP and DP groups were observed for stiffness (768.2 ± 281.3 N/mm vs. 785.5 ± 315.0 N/mm, P = .872), displacement at failure (8.1 ± 2.8 mm vs. 5.4 ± 1.2 mm, P = .150), and ultimate load at failure (1831.0 ± 229.6 N vs. 1842.0 ± 662.4 N, P = .964) under the condition of 3-point bending. Similarly, no significant differences between the SP and DP groups were observed for torsional stiffness (1.3 ± 0.8 N · m/° vs. 1.1 ± 0.4 N · m/°, P = .844), rotation at failure (17.3° ± 4.4° vs. 14.4° ± 1.2°, P = .205), and ultimate torque at failure (14.8 ± 6.5 N · m vs. 14.7 ± 6.9 N · m, P = .103) under the condition of posterior torsional loading. The most common mode of failure for 3-point bending testing was an oblique fracture (7 of 12 clavicles, 58.3%), with no significant difference between groups (3 of 6 in SP group [50%] vs. 4 of 6 in DP group [66.7%], P > .999). The most common mode of failure with posterior torsional loading was a spiral fracture (10 of 12 clavicles, 83.3%), with no significant difference between groups (4 of 6 in SP group [66.7%] vs. 6 of 6 in DP group [100%], P = .455). CONCLUSION: Following clavicle plate removal of either DP or SP, there is no statistically significant difference in the amount of force, under the condition of 3-point bending or torsional loading, required to fracture the diaphyseal clavicle in vitro.

The effects of wearing facemasks on oxygenation and ventilation at rest and during physical activity.

BACKGROUND: Facemasks are recommended to reduce the spread of SARS-CoV-2, but concern about inadequate gas exchange is an often cited reason for non-compliance. RESEARCH QUESTION: Among adult volunteers, do either cloth masks or surgical masks impair oxygenation or ventilation either at rest or during physical activity? STUDY DESIGN AND METHODS: With IRB approval and informed consent, we measured heart rate (HR), transcutaneous carbon dioxide (CO2) tension and oxygen levels (SpO2) at the conclusion of six 10-minute phases: sitting quietly and walking briskly without a mask, sitting quietly and walking briskly while wearing a cloth mask, and sitting quietly and walking briskly while wearing a surgical mask. Brisk walking required at least a 10bpm increase in heart rate. Occurrences of hypoxemia (decrease in SpO2 of ≥3% from baseline to a value of ≤94%) and hypercarbia (increase in CO2 tension of ≥5 mmHg from baseline to a value of ≥46 mmHg) in individual subjects were collected. Wilcoxon signed-rank was used for pairwise comparisons among values for the whole cohort (e.g. walking without a mask versus walking with a cloth mask). RESULTS: Among 50 adult volunteers (median age 33 years; 32% with a co-morbidity), there were no episodes of hypoxemia or hypercarbia (0%; 95% confidence interval 0-1.9%). In paired comparisons, there were no statistically significant differences in either CO2 or SpO2 between baseline measurements without a mask and those while wearing either kind of mask mask, both at rest and after walking briskly for ten minutes. INTERPRETATION: The risk of pathologic gas exchange impairment with cloth masks and surgical masks is near-zero in the general adult population.

Biomechanical significance of the collateral ligaments in transolecranon fracture-dislocations.

BACKGROUND: It is widely accepted that transolecranon fracture-dislocations are not associated with collateral ligament disruption. The aim of the present study was to investigate the significance of the collateral ligaments in transolecranon fractures. METHODS: Twenty cadaveric elbows with a mean age of 46.3 years were used. All soft tissue was dissected to the level of the capsule, leaving the anterior band of the medial collateral ligament (MCL) and lateral collateral ligament (LCL) intact. A standardized, oblique osteotomy starting from the distal margin of the cartilage bare area of the ulna was made. The elbows were loaded with an inferiorly directed force of 5 and 10 N in the intact, MCL cut, LCL cut, and both ligaments cut states. All measurements were recorded on lateral calibrated radiographs. RESULTS: The mean inferior translation with intact ligaments (n = 20) when the humerus was loaded with 5 and 10 N was 1.52 mm (95% confidence interval [CI], 1.02-2.02) and 2.23 mm (95% CI, 1.61-2.85), respectively. When the LCL was cut first (n = 10), the inferior translation with 5 and 10 N load was 4.11 mm (95% CI, 0.95-7.26) and 4.82 mm (95% CI, 1.91-7.72), respectively. When the MCL was cut first (n = 10), the inferior translation when loaded with 5 and 10 N was 3.94 mm (95% CI, 0.796-7.08) and 5.68 mm (95% CI, 3.03-8.33), respectively. The inferior translation when loaded with 5 and 10 N and both ligaments cut was 15.65 mm (95% CI, 12.59-18.79) and 17.50 mm (95% CI, 14.86-20.13), respectively. There was a statistical difference between the intact and MCL cut first at 10 N and when both ligaments were cut at 5 and 10 N. CONCLUSIONS: The findings suggest that collateral ligament disruption is a prerequisite for a transolecranon fracture-dislocation. An inferior translation of more than 3 mm suggests that at least one of the collateral ligaments is disrupted, and more than 7.5 mm indicates that both collateral ligaments are disrupted.

Accuracy of MRI-Based Talar Cartilage Thickness Measurement and Talus Bone and Cartilage Modeling: Comparison with Ground-Truth Laser Scan Measurements.

OBJECTIVE: The purpose of this work was to compare measurements of talar cartilage thickness and cartilage and bone surface geometry from clinically feasible magnetic resonance imaging (MRI) against high-accuracy laser scan models. Measurement of talar bone and cartilage geometry from MRI would provide useful information for evaluating cartilage changes, selecting osteochondral graft sources or creating patient-specific joint models. DESIGN: Three-dimensional (3D) bone and cartilage models of 7 cadaver tali were created using (1) manual segmentation of high-resolution volumetric sequence 3T MR images and (2) laser scans. Talar cartilage thickness was compared between the laser scan- and MRI-based models for the dorsal, medial, and lateral surfaces. The laser scan- and MRI-based cartilage and bone surface models were compared using model-to-model distance. RESULTS: Average cartilage thickness within the dorsal, medial, and lateral surfaces were 0.89 to 1.05 mm measured with laser scanning, and 1.10 to 1.22 mm measured with MRI. MRI-based thickness was 0.16 to 0.32 mm higher on average in each region. The average absolute surface-to-surface differences between laser scan- and MRI-based bone and cartilage models ranged from 0.16 to 0.22 mm for bone (MRI bone models smaller than laser scan models) and 0.35 to 0.38 mm for cartilage (MRI bone models larger than laser scan models). CONCLUSIONS: This study demonstrated that cartilage and bone 3D modeling and measurement of average cartilage thickness on the dorsal, medial, and lateral talar surfaces using MRI were feasible and provided similar model geometry and thickness values to ground-truth laser scan-based measurements.

The effect of glenosphere lateralization and inferiorization on deltoid force in reverse total shoulder arthroplasty.

BACKGROUND: A medialized center of rotation (COR) in reverse total shoulder arthroplasty (RTSA) comes with limitations such as scapular notching and reduced range of motion. To mitigate these effects, lateralization and inferiorization of the COR are performed, but may adversely affect deltoid muscle force. The study purposes were to measure the effect of RTSA with varying glenosphere configurations on (1) the COR and (2) deltoid force compared with intact shoulders and shoulders with massive posterosuperior rotator cuff tears (PS-RCT). We hypothesized that the highest deltoid forces would occur in shoulders with PS-RCT, and that RTSA would lead to a decrease in required forces that is further minimized with lateralization and inferiorization of the COR but still higher compared with native shoulders with an intact rotator cuff. METHODS: In this study, 8 cadaveric shoulders were dissected leaving only the rotator cuff muscles and capsule intact. A custom apparatus incorporating motion capture and a dynamic tensile testing machine to measure the changes in COR and deltoid forces while simultaneously recording glenohumeral abduction was designed. Five consecutive testing states were tested: (1) intact shoulder, (2) PS-RCT, (3) RTSA with standard glenosphere, (4) RTSA with 4 mm lateralized glenosphere, and (5) RTSA with 2.5 mm inferiorized glenosphere. Statistical Parametric Mapping was used to analyze the deltoid force as a function of the abduction angle. One-way repeated-measures within-specimens analysis of variance was conducted, followed by post hoc t-tests for pairwise comparisons between the states. RESULTS: All RTSA configurations shifted the COR medially and inferiorly with respect to native (standard: 4.2 ± 2.1 mm, 19.7 ± 3.6 mm; 4 mm lateralized: 3.9 ± 1.2 mm, 16.0 ± 1.8; 2.5 mm inferiorized: 6.9 ± 0.9 mm, 18.9 ± 1.7 mm). Analysis of variance showed a significant effect of specimen state on deltoid force across all abduction angles. Of the 10 paired t-test comparisons made between states, only 3 showed significant differences: (1) intact shoulders necessitated significantly lower deltoid force than specimens with PS-RCT below 42° abduction, (2) RTSAs with standard glenospheres required significantly lower deltoid force than RTSA with 4 mm lateralized glenospheres above 34° abduction, and (3) RTSAs with 2.5 mm inferiorized glenospheres had significantly lower deltoid force than RTSA with 4 mm of glenosphere lateralization at higher abduction angles. CONCLUSIONS: RTSA with a 2.5 mm inferiorized glenosphere and no additional lateralization resulted in less deltoid force to abduct the arm compared with 4 mm lateralized glenospheres. Therefore, when aiming to mitigate downsides of a medialized COR, an inferiorized glenosphere may be preferable in terms of its effect on deltoid force.

Latarjet Procedure With Coracoclavicular Ligament Augmentation for Traumatic Coracoid Fracture and Recurrent Anterior Glenohumeral Instability in an Elite Contact Athlete.

Coracoid fractures are relatively uncommon injuries and are typically treated conservatively or with open reduction and internal fixation of displaced fractures. In rare cases, coracoid fractures coincide with glenohumeral instability. Although glenohumeral instability is frequently treated with Bankart procedures, the Latarjet procedure (or transfer of the coracoid process) is used in patients with significant glenoid bone loss, recurrent instability, or prior failed Bankart procedures. However, in some cases, surgeons opt for the Latarjet procedure in patients who are at risk for recurrent instability, such as the elite contact athlete presented in this case. This Technical Note describes the transfer of a previously fractured coracoid fragment to the anterior glenoid rather than reduction of the fracture with concurrent coracoclavicular ligament augmentation to restore anterior shoulder stability.

Biomechanical Comparison of Knotless All-Suture Anchors and Knotted All-Suture Anchors in Type II SLAP Lesions: A Cadaveric Study.

PURPOSE: To compare the biomechanical performance of knotless versus knotted all-suture anchors for the repair of type II SLAP lesions with a simulated peel-back mechanism. METHODS: Twenty paired cadaveric shoulders were used. A standardized type II SLAP repair was performed using knotless (group A) or knotted (group B) all-suture anchors. The long head of the biceps (LHB) tendon was loaded in a posterior direction to simulate the peel-back mechanism. Cyclic loading was performed followed by load-to-failure testing. Stiffness, load at 1 and 2 mm of displacement, load to repair failure, load to ultimate failure, and failure modes were assessed. RESULTS: The mean load to repair failure was similar in groups A (179.99 ± 58.42 N) and B (167.83 ± 44.27 N, P = .530). The mean load to ultimate failure was 230 ± 95.93 N in group A and 229.48 ± 78.45 N in group B and did not differ significantly (P = .958). Stiffness (P = .980), as well as load at 1 mm (P = .721) and 2 mm (P = .849) of displacement, did not differ significantly between groups. In 16 of the 20 specimens (7 in group A and 9 in group B), ultimate failure occurred at the proximal LHB tendon. Failed occurred through slippage of the labrum in 1 specimen in each group and through anchor pullout in 2 specimens in group A. CONCLUSIONS: Knotless and knotted all-suture anchors displayed high initial fixation strength with no significant differences between groups in type II SLAP lesions. Ultimate failure occurred predominantly as tears of the proximal LHB tendon. CLINICAL RELEVANCE: All-suture anchors have a smaller diameter than solid anchors, can be inserted through curved guides, preserve bone stock, and facilitate postoperative imaging. There is a paucity of literature investigating the biomechanical capacities of knotless versus knotted all-suture anchors in type II SLAP repair.

Heavy and Explosive Training Differentially Affect Modeled Cyclic Muscle Power.

INTRODUCTION/PURPOSE: Muscular power is important in applications ranging from elite sport to activities of daily living. Results for improvements in power after resistance training have been mixed, possibly because of changes in muscle activation and deactivation rates. Our purpose was to determine the effects of heavy and explosive training programs on maximal power across a range of frequencies during cyclical contractions using a mathematical model. METHODS: Maximal force production and time constants for muscle activation and deactivation after heavy and explosive training programs were determined using previously reported data. A muscle-tendon model was subjected to sinusoidal length change, and activation and deactivation were set to maximize power for a range of cycle frequencies (0.5-3.0 Hz). Power for shortening/lengthening cycles was modeled for each training program and for a hypothetical periodized program with the best results from each program. RESULTS: The heavy training program increased strength by 26.8%, and increased time required for activation (20%) and deactivation (48%). The explosive training program increased strength by 10.8%, but decreased time required for activation (24%) and deactivation (10%). Increases in maximal power were similar after heavy (13.6%) and explosive (13.8%) training, but with different power-frequency relationships (optimal frequencies of 1.56 and 1.94 Hz for heavy and explosive, respectively). The hypothetical periodized program increased power by 30.3% (optimal frequency at 1.94 Hz). CONCLUSION: Power during low-frequency movements (e.g., swimming) improved more after heavy training, whereas power during high-frequency movements (e.g., running) improved more after explosive training. These findings suggest that changes in time required for activation and deactivation in response to training are highly influential for maximal power across a range of functional frequencies, ultimately altering the ideal training regimen for specific activities.

Differences in medical student self-evaluations of clinical and professional skills.

BACKGROUND: The skill of self-assessment is critical to medical students. We sought to determine whether there were differences between student self-assessments and their faculty assessments and if they were modified by gender. Additionally, we sought to determine the differences in these assessments between students in a traditional (core) versus an enhanced (SELECT) medical school curriculum. METHODS: In this retrospective study, mid-term and final assessment and feedback forms from the first-year Doctoring 1 course were analyzed from three academic years: 2014-2015 through 2016-2017. Data were abstracted from the forms and de-identified for analysis. Class year, student gender, and class type were also abstracted from this "on the shelf" data from program assessment. The level of agreement between faculty and student assessments was investigated using Wilcoxon signed ranks test. The gender differences (male versus female students) between student assessments and their assessment by their faculty were investigated by using the Kruskal Wallis test. RESULTS: Five hundred and thirty-five student self-assessments were analyzed. Fifty-six percent (301/535) were male while 44% (234/535) were female. Faculty assessments (P-value <0.001) were higher than students and this was not modified by student gender. Compared to the domain of "participation" in the core program, there was no difference between the student/faculty ratings based on student gender (P-value: 0.48); there was a difference in the SELECT program cohort (P-value: 0.02). Specifically, the female students appear to rate themselves lower (female student: mean/standard deviation: 2.07/0.52) compared to their faculty (faculty: mean/standard deviation: 2.42/0.55). CONCLUSION: Faculty consistently assessed the students at a higher rating than the students rated themselves. The level of difference between student self-assessments and their assessment by their faculty was not modified by student gender. With the minor exception of "participation," there was no difference between students in the two different doctoring class curriculums.