Use of Feruloyl Esterase as Laccase-Mediator System in Paper Bleaching.

In order to bleach the eucalyptus kraft pulp, two enzyme treatments involving feruloyl esterase and laccase were used in the TCF sequence. Hydroxycinnamic acids, which were released from lignin subunits by the activity of feruloyl esterase, were used as a natural mediator of laccase. The use of sequentially feruloyl esterase and laccase has much higher pulp bleaching effects than the individual enzymes. GthFAE, BmegLac and GthFAE+BmegLac treatments (X) reduced the kappa number of eucalyptus kraft pulps by indicating 9%, 18%, and 30% delignification rates, respectively. Just like in delignification rates, the highest brightness improvement was achieved from the GthFAE+BmegLac combination. The results of the present study indicated that the natural mediators, which are presented in the structure of lignin, could be used as laccase-mediators for pulp bleaching more efficiently and cost-effectively.

An environmentally friendly organosolv (ethanol-water) pulping of poplar wood.

In this study pulp production from the fast growing plant, poplar; was examined for organosolv pulping with or without catalysts. In order to find the optimum cooking conditions, 18 different cooking experiments were carried out. The effect of ethanol ratio, cooking time as well as catalyst was studied. It was observed that even at lower temperature (90 degrees C), cooking without catalyst was able to cause sufficient defiberization. It was seen that the increasing proportion of catalyst and cooking temperature resulted in an increased delignification. However in the case of using 0.02% acid catalyst pulp yield and viscosity were lowered to an unacceptable level. The most important cooking factors were found to be the proportion of acid catalyst. Furthermore, the delignification performance was found to be depending on the pH of the black liquor. In a result, the optimum pulp properties were obtained by cooking at 180 degrees C for 90 min with 50% ethanol mixture without catalyst. The pulp yield was noted as 44.49%, viscosity was 892 cm2 g(-1) and the kappa number was 67.