First-photon imaging.

Imagers that use their own illumination can capture three-dimensional (3D) structure and reflectivity information. With photon-counting detectors, images can be acquired at extremely low photon fluxes. To suppress the Poisson noise inherent in low-flux operation, such imagers typically require hundreds of detected photons per pixel for accurate range and reflectivity determination. We introduce a low-flux imaging technique, called first-photon imaging, which is a computational imager that exploits spatial correlations found in real-world scenes and the physics of low-flux measurements. Our technique recovers 3D structure and reflectivity from the first detected photon at each pixel. We demonstrate simultaneous acquisition of sub-pulse duration range and 4-bit reflectivity information in the presence of high background noise. First-photon imaging may be of considerable value to both microscopy and remote sensing.

Exploiting sparsity in time-of-flight range acquisition using a single time-resolved sensor.

Range acquisition systems such as light detection and ranging (LIDAR) and time-of-flight (TOF) cameras operate by measuring the time difference of arrival between a transmitted pulse and the scene reflection. We introduce the design of a range acquisition system for acquiring depth maps of piecewise-planar scenes with high spatial resolution using a single, omnidirectional, time-resolved photodetector and no scanning components. In our experiment, we reconstructed 64 × 64-pixel depth maps of scenes comprising two to four planar shapes using only 205 spatially-patterned, femtosecond illuminations of the scene. The reconstruction uses parametric signal modeling to recover a set of depths present in the scene. Then, a convex optimization that exploits sparsity of the Laplacian of the depth map of a typical scene determines correspondences between spatial positions and depths. In contrast with 2D laser scanning used in LIDAR systems and low-resolution 2D sensor arrays used in TOF cameras, our experiment demonstrates that it is possible to build a non-scanning range acquisition system with high spatial resolution using only a standard, low-cost photodetector and a spatial light modulator.