GD-OES Investigations of Lithium-Ion Battery Graphite Anodes: Impact of Plasma Parameters and Electrode Properties.

Due to the demand of lithium-ion battery investigations with glow discharge optical emission spectroscopy (GD-OES), a fundamental study of the influence of essential GD-OES parameters toward graphite anodes in an argon plasma was conducted and compared to previous investigations of massive materials. It is shown that increased applied voltage (500-700 V) enhances the sputtering rate by up to 100%/100 V while keeping the crater shape unaffected. In contrast to this, gas pressure variation seems to be the main tool for crater shape adjustment. Enhancement of the gas pressure (160-300 Pa) pushes the crater profile from a concave to flat shape and to concave again. Known plasma effects are discussed and correlated with the observations. A set of measuring parameters providing a good balance between the crater shape and the sputtering rate is proposed. Additionally, an increase of the duty cycle in the pulsed glow discharge mode leads to a linear increase of the sputtering rate, while a pulse duration rise enhances the sputtering rate in a nonlinear fashion. Thus, different pulsing conditions represent instruments for enhancement of the sputtering rate without affecting the crater shape significantly. Our investigation of different electrode densities shows that lower densities lead to a larger sputtered volume as well as a larger concavity of the released crater.

δ-Methyl Branching in the Side Chain Makes the Difference: Access to Room-Temperature Discotics.

Although discotic liquid crystals are attractive functional materials, their use in electronic devices is often restricted by high melting and clearing points. Among the promising candidates for applications are [15]crown-5 ether-based liquid crystals with peripheral n-alkoxy side chains, which, however, still have melting points above room temperature. To overcome this problem, a series of o-terphenyl and triphenylene [15]crown-5 ether derivatives was prepared in which δ-methyl-branched alkoxy side chains of varying lengths substitute the peripheral linear alkoxy chains. The mesomorphic properties of the novel crown ethers were studied by differential scanning calorimetry, polarizing optical microscopy, and X-ray diffraction. δ-Methyl branching indeed lowers melting points resulting in room-temperature hexagonal columnar mesophases. The mesophase widths, which ranged from 87 to 30 K for o-terphenyls, significantly increased to 106-147 K for the triphenylenes depending on the chain lengths, revealing the beneficial effect of a flat mesogen, due to improved π-π interactions.

Pushing steric bias in the Scholl reaction to access liquid crystalline crown ethers.

Sterically congested o-terphenyl crown ethers with alkoxy substituents at the 2,3,4-position or 3,4,5-position were synthesized from the corresponding tetrabromodibenzo[15]crown-5 and the corresponding boronic acids or borolanes via Suzuki cross-coupling and subsequently cyclized to the corresponding triphenylenes utilizing the Scholl reaction. Both series of compounds were investigated by differential scanning calorimetry, polarizing optical microscopy, and X-ray diffraction (SAXS, WAXS) regarding their mesomorphic properties. While all but one of the 3,4,5-substituted derivatives displayed liquid crystalline behavior (Col(h) and Col(r)), only the 2,3,4-substituted triphenylene with the shortest alkoxy chains was liquid crystalline (Col(r)).

Synthesis of polychlorinated terphenyl mixtures and gas chromatography with mass spectrometry data of tetra- to octachlorinated ortho-, meta-, and para-terphenyls.

Polychlorinated terphenyls (PCTs) are a class of polyhalogenated compounds previously used in similar applications as polychlorinated biphenyls (PCBs). According to present knowledge all industrial production was closed in the 1970s. The total PCT manufacture reached about 5% of the production of PCBs. Unlike the PCBs, PCTs have been scarcely analyzed in environmental samples mostly due to analytical difficulties. PCTs were synthesized by the chlorination of technical terphenyl which consists of ortho-, meta- and para-terphenyls. This procedure led to very complex mixtures of polychlorinated compounds whose composition, especially with regard to the terphenyl backbones, remained unknown. Here we report the individual chlorination of the three terphenyl backbones to mixtures of Tetra- to OctaCTs, respectively. The average degree of chlorination of the ortho-, meta- and para-PCTs ranged from 6.8 to 7.4. These products were analyzed by gas chromatography with mass spectrometry in electron ionization (GC/EI-MS) and electron capture negative ion (GC/ECNI-MS) modes. The elution order of isomers was ortho-PCTs≪meta-PCTs

Bromination of 2-methoxydiphenyl ether to an average of tetrabrominated 2-methoxydiphenyl ethers.

Brominated 2-phenoxyanisoles (2-methoxydiphenyl ethers, 2-MeO-BDEs) are a class of halogenated natural products, produced by algae and sponges. Especially two tetrabrominated isomers, i.e. 2'-MeO-BDE 68 (BC-2) and 6-MeO-BDE 47 (BC-3), have also been frequently determined in environmental and food samples. In addition, 2-MeO-BDEs are under discussion as metabolites of polybrominated diphenyl ethers (PBDEs). In this study, we synthesized the backbone 2-methoxydiphenyl ether and brominated it to an average degree of four bromine substituents. The reaction mixture only contained one major product (∼90%) along with three further MeO-BDEs and ∼5% hydroxylated BDEs. In all likelihood, the HO-BDEs were formed in a side reaction by cleavage of the methoxy group. The major MeO-BDE was identified as 6'-methoxy-2,3',4,4'-tetrabromodiphenyl ether (6'-MeO-BDE-66). The HO-BDEs were separated by KOH/n-hexane partitioning, and the resulting 2-MeO-BDEs were fractionated by means of high-speed counter-current chromatography (HSCCC). Due to the excellent enrichment facilities of HSCCC, some 15 MeO-BDEs, mainly present at traces only, could be detected in 26 fractions, and eight of them could be characterized by nuclear magnetic resonance spectroscopy (NMR). Only two of the compounds--2'-MeO-BDE 68 and 6-MeO-BDE 123--had been characterized as natural products while the prominent halogenated natural product 6-MeO-BDE 47 was not detected at all in the reaction product. The "non-natural" 2-MeO-BDEs may be useful internal standards in trace analysis.