Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 2 de 2
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Vet J ; 207: 169-176, 2016 Jan.
Artigo em Inglês | MEDLINE | ID: mdl-26639831

RESUMO

This study used a UK trimming protocol to determine whether hoof balance is achieved (as defined by equivalence of geometric proportions) in cadaver limbs (n = 49) and two cohorts of horses (shod, n = 6, and unshod, n = 20; three trimming cycles). To determine equivalence, dorsal hoof wall length (DHWL), distance from the heel buttress to the centre of pressure (HBUT-COP) and distance from dorsal toe to centre of rotation (DT-COR) were calculated as a proportion of bearing border length (BBL) using digital photography. Geometric proportions were tested using Fieller's test of equivalence with limits of difference of 2.8%. In 22 cadaver limbs the location of external COR and COP was also mapped radiographically to the extensor process of the third phalanx and the centre of rotation of the distal interphalangeal joint. Equivalence of geometric proportions was not present following trimming in cadaver limbs or in the two cohorts. Although the dorsal hoof wall to heel wall ratio improved in cadaver and unshod horses after trimming, dorsal hoof wall and lateral heel parallelism was absent in all groups and COP was not consistently in line with the extensor process. Increased COP-COR distance occurred in shod horses and may relate to solar arch flattening. Palmar heel migration, however, occurred more in unshod horses. The study shows that equivalence of geometric proportions as a measure of static hoof balance was not commonly present and widely published measures and ratios of hoof balance rarely occurred in this sample population of horses.


Assuntos
Casco e Garras , Cavalos , Criação de Animais Domésticos , Animais , Pesos e Medidas Corporais , Casco e Garras/anatomia & histologia , Cavalos/anatomia & histologia
2.
Environ Sci Technol ; 35(15): 3252-8, 2001 Aug 01.
Artigo em Inglês | MEDLINE | ID: mdl-11506016

RESUMO

Polycysteine and other polyamino acid functionalized microfiltration membrane sorbents work exceptionally well for the removal and recovery of toxic heavy metals from aqueous streams. These are high capacity sorbents (0.3-3.7 mg/cm2) with excellent accessibility and selectivity for heavy metals, such as Hg(II), Pb(II), and Cd(II) over nontoxic components such as calcium. Polycysteine functionalized membranes work particularly well for metals such as Hg(II) and Cd(II), even in high total dissolved solids containing streams. Parameters such as permeate flow rate,feed metal concentration, and counterion (for Hg(II)) have also been found to influence sorbent behavior. For multicomponent systems, polyglutamic acid functionalized membranes have been found to selectively sorb Pb(II) versus Cd(II). Selective sorption of Cr(III) has also been observed with actual waste streams containing several heavy metals, hardness, and high sodium (2,000 mg/L). The high capacity, site accessibility, and ease of regeneration of these membrane-based sorbents make them ideal for environmental separations when volume reduction or selective recovery is required.


Assuntos
Aminoácidos/química , Metais Pesados/análise , Peptídeos/química , Poluentes da Água/análise , Absorção , Monitoramento Ambiental/métodos , Filtração , Membranas Artificiais
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...